Hartmut Hackmann wrote: > Hi, folks > > In my personal repository at > http://linuxtv.org/hg/~hhackmann/v4l-dvb/ > there are 2 changes that affect all DVB-S cards with tda10086 > - The reference frequency (crystal) of the tda10086 now is an option > of the tda10086_config struct. This is necessary i.e. for cards with the > SD1878 tuner. > I adapted the driver for these boards: > - TT Budget-S-1401 > - Pinnacle 400e / Technotrend USB > - Lifeview Flydvb Trio > - Medion MD8800 > - Lifeview Flydvbs LR300 > - Philips Snake > - MD7134 (Bridge 2 - works now) > > - The bandwidth of the tda826x baseband filter is now set according to the > expected symbol rate. The boards with this tuner now should work with > transponders providing a higher symbol rate than usual. > This patch was provided by Oliver Endriss. > > I tried to make the changes backward compatibe but since i can't test these > cards, i need your feedback. Sorry, I have no hardware to test your patches. > Oliver: there was no signature in your patch. But of corse i mentioned you > in the log. I hope that's ok for you. I don't care, but beware that the lawyers @LKML might send you to jail. :D CU Oliver -- ---------------------------------------------------------------- VDR Remote Plugin 0.4.0: http://www.escape-edv.de/endriss/vdr/ ---------------------------------------------------------------- _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
