Hi Hartmut,
OK, found some more spare time, but very, very frustrated!
1) Tried ubuntu 7.04, 7.10, 8.04
Tried with just modules that exist in kernel (no v4l-dvb)
Tried v4l-dvb from June 2007 and tried current v4l-dvb
Tried with/without Hartmut patch - changeset 7376 49ba58715fe0
Tried with .gpio_config = TDA10046_GP11_I, or .gpio_config =
TDA10046_GP01_I,
Tried using configs in saa7134-dvb.c matching tiger, tiger_s,
pinnacle 310i, twinhan 3056
# Australia / Perth (Roleystone transmitter)
# T freq bw fec_hi fec_lo mod transmission-mode guard-interval hierarchy
# SBS
T 704500000 7MHz 2/3 NONE QAM64 8k 1/8 NONE
# ABC
T 725500000 7MHz 3/4 NONE QAM64 8k 1/16 NONE
# Seven
T 746500000 7MHz 2/3 NONE QAM64 8k 1/16 NONE
# Nine
T 767500000 7MHz 3/4 NONE QAM64 8k 1/16 NONE
# Ten
T 788500000 7MHz 3/4 NONE QAM64 8k 1/16 NONE
2) I have these saa7134 cards:
- pinnacle 310i
- kworld 210
This cx88 card:
- dvico DVB-T Pro hybrid (analog tv not work)
- problem only occurs with kworld 210 in linux (works fine in WinXP)
3) In WinXP, all channels, both analog tv and dvb-t found
4) In linux, if start dvb-t first, never scans SBS - dmesg1
5) In linux, if start analog tv first, stop, then start dvb-t, scan
finds SBS - dmesg2
dmesg1:
[ 44.841316] Linux video capture interface: v2.00
[ 45.150800] saa7130/34: v4l2 driver version 0.2.14 loaded
[ 45.150869] saa7133[0]: found at 0000:05:01.0, rev: 209, irq: 17,
latency: 64, mmio: 0xfebff800
[ 45.150875] saa7133[0]: subsystem: 17de:7250, board: KWorld DVB-T 210
[card=114,autodetected]
[ 45.150882] saa7133[0]: board init: gpio is 100
[ 45.299946] saa7133[0]: i2c eeprom 00: de 17 50 72 ff ff ff ff ff ff
ff ff ff ff ff ff
[ 45.299956] saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 45.299963] saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 45.299970] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 45.299976] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 45.299983] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 45.299989] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 45.299996] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 45.300002] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 45.300009] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 45.300015] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 45.300022] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 45.300028] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 45.300035] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 45.300041] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 45.300048] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 45.308034] saa7133[0]: i2c scan: found device @ 0x10 [???]
[ 45.328132] saa7133[0]: i2c scan: found device @ 0x96 [???]
[ 45.336273] saa7133[0]: i2c scan: found device @ 0xa0 [eeprom]
[ 45.489666] tda8290_probe: tda8290 detected @ 0-004b
[ 45.489672] tuner' 0-004b: tda829x detected
[ 45.489675] tuner' 0-004b: Setting mode_mask to 0x0e
[ 45.489679] tuner' 0-004b: chip found @ 0x96 (saa7133[0])
[ 45.489683] tuner' 0-004b: tuner 0x4b: Tuner type absent
[ 45.489721] tuner' 0-004b: Calling set_type_addr for type=54,
addr=0xff, mode=0x04, config=0x00
[ 45.489724] tuner' 0-004b: set addr for type -1
[ 45.489727] tuner' 0-004b: defining GPIO callback
[ 45.505825] tda8290_probe: tda8290 detected @ 0-004b
[ 45.570465] tda829x 0-004b: setting tuner address to 61
[ 45.610865] tda827x: tda827x_attach:
[ 45.610868] tda827x: type set to Philips TDA827X
[ 45.618924] tda827x: tda827xa tuner found
[ 45.618927] tda827x: tda827x_init:
[ 45.618929] tda827x: tda827xa_sleep:
[ 45.635024] tda829x 0-004b: type set to tda8290+75a
[ 45.719438] tuner' 0-004b: type set to tda8290+75a
[ 45.719443] tuner' 0-004b: tv freq set to 400.00
[ 45.719447] tda829x 0-004b: setting tda829x to system xx
[ 45.824191] tda827x: setting tda827x to system xx
[ 45.880752] tda827x: AGC2 gain is: 8
[ 46.219521] tda829x 0-004b: tda8290 not locked, no signal?
[ 46.340456] tda829x 0-004b: tda8290 not locked, no signal?
[ 46.461656] tda829x 0-004b: tda8290 not locked, no signal?
[ 46.566695] tda829x 0-004b: adjust gain, step 1. Agc: 0, ADC stat: 0,
lock: 0
[ 46.707474] tda829x 0-004b: adjust gain, step 2. Agc: 204, lock: 0
[ 46.852660] tda829x 0-004b: adjust gain, step 3. Agc: 108
[ 46.990029] tuner' 0-004b: saa7133[0] tuner' I2C addr 0x96 with type
54 used for 0x0e
[ 47.002109] tuner' 0-004b: switching to v4l2
[ 47.002114] tuner' 0-004b: tv freq set to 400.00
[ 47.002118] tda829x 0-004b: setting tda829x to system B
[ 47.106916] tda827x: setting tda827x to system B
[ 47.175250] tda827x: AGC2 gain is: 8
[ 47.506148] tda829x 0-004b: tda8290 not locked, no signal?
[ 47.635056] tda829x 0-004b: tda8290 not locked, no signal?
[ 47.751728] tda829x 0-004b: tda8290 not locked, no signal?
[ 47.856768] tda829x 0-004b: adjust gain, step 1. Agc: 0, ADC stat: 0,
lock: 0
[ 48.002207] tda829x 0-004b: adjust gain, step 2. Agc: 225, lock: 0
[ 48.151158] tda829x 0-004b: adjust gain, step 3. Agc: 133
[ 48.288197] tuner' 0-004b: tv freq set to 400.00
[ 48.288200] tda829x 0-004b: setting tda829x to system B
[ 48.393231] tda827x: setting tda827x to system B
[ 48.453810] tda827x: AGC2 gain is: 8
[ 48.784236] tda829x 0-004b: tda8290 not locked, no signal?
[ 48.905435] tda829x 0-004b: tda8290 not locked, no signal?
[ 49.026553] tda829x 0-004b: tda8290 not locked, no signal?
[ 49.127045] tda829x 0-004b: adjust gain, step 1. Agc: 0, ADC stat: 0,
lock: 0
[ 49.272200] tda829x 0-004b: adjust gain, step 2. Agc: 196, lock: 0
[ 49.417642] tda829x 0-004b: adjust gain, step 3. Agc: 100
[ 49.563001] saa7133[0]: registered device video0 [v4l2]
[ 49.563022] saa7133[0]: registered device vbi0
[ 49.563042] saa7133[0]: registered device radio0
[ 49.563049] saa7133[0]: dsp access error
[ 49.563051] saa7133[0]: dsp access error
[ 49.563110] tuner' 0-004b: Cmd TUNER_SET_STANDBY accepted for analog TV
[ 49.642566] saa7134 ALSA driver for DMA sound loaded
[ 49.642600] saa7133[0]/alsa: saa7133[0] at 0xfebff800 irq 17
registered as card -2
[ 49.927240] tda827x: tda827x_attach:
[ 49.927245] tda827x: type set to Philips TDA827X
[ 49.927251] DVB: registering new adapter (saa7133[0])
[ 49.927255] DVB: registering frontend 0 (Philips TDA10046H DVB-T)...
[ 49.999195] tda1004x: setting up plls for 48MHz sampling clock
[ 50.283154] tda1004x: found firmware revision 29 -- ok
[ 50.571129] tda827x: tda827xa tuner found
[ 50.571136] tda827x: tda827xa_sleep:
[ 50.643361] saa7133[0]/dvb: setting GPIO21 to 1 (Radio antenna?)
-> ... here start scanning with dvb-utils/scan via me-tv
[ 87.654762] tda1004x: setting up plls for 48MHz sampling clock
[ 87.858921] tda1004x: found firmware revision 29 -- ok
[ 88.050891] tda827x: tda827x_init:
[ 88.050895] saa7133[0]/dvb: setting GPIO21 to 0 (TV antenna?)
[ 91.888418] tda827x: tda827xa_set_params:
[ 91.888425] tda827x: setting LNA to high gain
[ 92.096383] tda827x: tda8275a AGC2 gain is: 8
[ 93.856104] tda827x: tda827xa_set_params:
[ 93.856113] tda827x: setting LNA to high gain
[ 94.100059] tda827x: tda8275a AGC2 gain is: 8
[ 100.854974] tda827x: tda827xa_set_params:
[ 100.854981] tda827x: setting LNA to high gain
[ 101.098933] tda827x: tda8275a AGC2 gain is: 8
[ 105.510225] tda827x: tda827xa_set_params:
[ 105.510232] tda827x: setting LNA to high gain
[ 105.754184] tda827x: tda8275a AGC2 gain is: 8
[ 109.393600] tda827x: tda827xa_set_params:
[ 109.393606] tda827x: setting LNA to high gain
[ 109.637559] tda827x: tda8275a AGC2 gain is: 8
[ 111.825207] tda827x: tda827xa_set_params:
[ 111.825214] tda827x: setting LNA to high gain
[ 112.069167] tda827x: tda8275a AGC2 gain is: 8
[ 113.852884] tda827x: tda827xa_set_params:
[ 113.852891] tda827x: setting LNA to high gain
[ 114.096840] tda827x: tda8275a AGC2 gain is: 8
[ 116.828403] tda827x: tda827xa_set_params:
[ 116.828410] tda827x: setting LNA to high gain
[ 117.072362] tda827x: tda8275a AGC2 gain is: 8
[ 124.419181] tda827x: tda827xa_set_params:
[ 124.419187] tda827x: setting LNA to high gain
[ 124.663139] tda827x: tda8275a AGC2 gain is: 8
[ 129.802314] tda827x: tda827xa_set_params:
[ 129.802320] tda827x: setting LNA to high gain
[ 130.046273] tda827x: tda8275a AGC2 gain is: 8
[ 133.029794] tda827x: tda827xa_set_params:
[ 133.029800] tda827x: setting LNA to high gain
[ 133.273756] tda827x: tda8275a AGC2 gain is: 8
[ 139.768713] tda827x: tda827xa_set_params:
[ 139.768719] tda827x: setting LNA to high gain
[ 140.012692] tda827x: tda8275a AGC2 gain is: 8
[ 150.782936] tda827x: tda827xa_set_params:
[ 150.782942] tda827x: setting LNA to high gain
[ 151.002900] tda827x: tda8275a AGC2 gain is: 8
[ 153.166553] tda827x: tda827xa_set_params:
[ 153.166560] tda827x: setting LNA to high gain
[ 153.386517] tda827x: tda8275a AGC2 gain is: 8
[ 160.021449] tda827x: tda827xa_set_params:
[ 160.021456] tda827x: setting LNA to high gain
[ 160.237414] tda827x: tda8275a AGC2 gain is: 8
[ 171.027678] tda827x: tda827xa_set_params:
[ 171.027684] tda827x: setting LNA to high gain
[ 171.243642] tda827x: tda8275a AGC2 gain is: 8
[ 179.591275] tda827x: tda827xa_set_params:
[ 179.591282] tda827x: setting LNA to high gain
[ 179.799322] tda827x: tda8275a AGC2 gain is: 8
[ 188.045325] tda827x: tda827xa_sleep:
[ 188.125616] saa7133[0]/dvb: setting GPIO21 to 1 (Radio antenna?)
---------------------------------------------------------------------
dmesg2:
[ 45.042866] Linux video capture interface: v2.00
[ 45.103665] saa7130/34: v4l2 driver version 0.2.14 loaded
[ 45.103745] saa7133[0]: found at 0000:05:01.0, rev: 209, irq: 17,
latency: 64, mmio: 0xfebff800
[ 45.103752] saa7133[0]: subsystem: 17de:7250, board: KWorld DVB-T 210
[card=114,autodetected]
[ 45.103760] saa7133[0]: board init: gpio is 100
[ 45.263665] saa7133[0]: i2c eeprom 00: de 17 50 72 ff ff ff ff ff ff
ff ff ff ff ff ff
[ 45.263679] saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 45.263690] saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 45.263701] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 45.263712] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 45.263722] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 45.263733] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 45.263744] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 45.263755] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 45.263766] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 45.263777] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 45.263787] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 45.263798] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 45.263809] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 45.263820] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 45.263831] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 45.275764] saa7133[0]: i2c scan: found device @ 0x10 [???]
[ 45.295820] saa7133[0]: i2c scan: found device @ 0x96 [???]
[ 45.308019] saa7133[0]: i2c scan: found device @ 0xa0 [eeprom]
[ 45.449032] tda8290_probe: tda8290 detected @ 0-004b
[ 45.449037] tuner' 0-004b: tda829x detected
[ 45.449041] tuner' 0-004b: Setting mode_mask to 0x0e
[ 45.449044] tuner' 0-004b: chip found @ 0x96 (saa7133[0])
[ 45.449048] tuner' 0-004b: tuner 0x4b: Tuner type absent
[ 45.449082] tuner' 0-004b: Calling set_type_addr for type=54,
addr=0xff, mode=0x04, config=0x00
[ 45.449086] tuner' 0-004b: set addr for type -1
[ 45.449089] tuner' 0-004b: defining GPIO callback
[ 45.465191] tda8290_probe: tda8290 detected @ 0-004b
[ 45.529831] tda829x 0-004b: setting tuner address to 61
[ 45.570255] tda827x: tda827x_attach:
[ 45.570258] tda827x: type set to Philips TDA827X
[ 45.578310] tda827x: tda827xa tuner found
[ 45.578313] tda827x: tda827x_init:
[ 45.578315] tda827x: tda827xa_sleep:
[ 45.594481] tda829x 0-004b: type set to tda8290+75a
[ 45.663128] tuner' 0-004b: type set to tda8290+75a
[ 45.663132] tuner' 0-004b: tv freq set to 400.00
[ 45.663137] tda829x 0-004b: setting tda829x to system xx
[ 45.779921] tda827x: setting tda827x to system xx
[ 45.836196] tda827x: AGC2 gain is: 9
[ 46.167210] tda829x 0-004b: tda8290 not locked, no signal?
[ 46.291982] tda829x 0-004b: tda8290 not locked, no signal?
[ 46.412775] tda829x 0-004b: tda8290 not locked, no signal?
[ 46.517815] tda829x 0-004b: adjust gain, step 1. Agc: 0, ADC stat: 0,
lock: 0
[ 46.663254] tda829x 0-004b: adjust gain, step 2. Agc: 225, lock: 0
[ 46.804045] tda829x 0-004b: adjust gain, step 3. Agc: 119
[ 46.941140] tuner' 0-004b: saa7133[0] tuner' I2C addr 0x96 with type
54 used for 0x0e
[ 46.953230] tuner' 0-004b: switching to v4l2
[ 46.953236] tuner' 0-004b: tv freq set to 400.00
[ 46.953240] tda829x 0-004b: setting tda829x to system B
[ 47.058260] tda827x: setting tda827x to system B
[ 47.118839] tda827x: AGC2 gain is: 9
[ 47.449264] tda829x 0-004b: tda8290 not locked, no signal?
[ 47.570463] tda829x 0-004b: tda8290 not locked, no signal?
[ 47.695499] tda829x 0-004b: tda8290 not locked, no signal?
[ 47.796012] tda829x 0-004b: adjust gain, step 1. Agc: 0, ADC stat: 0,
lock: 0
[ 47.941308] tda829x 0-004b: adjust gain, step 2. Agc: 204, lock: 0
[ 48.086748] tda829x 0-004b: adjust gain, step 3. Agc: 108
[ 48.227685] tuner' 0-004b: tv freq set to 400.00
[ 48.227688] tda829x 0-004b: setting tda829x to system B
[ 48.332434] tda827x: setting tda827x to system B
[ 48.389003] tda827x: AGC2 gain is: 8
[ 48.727743] tda829x 0-004b: tda8290 not locked, no signal?
[ 48.848678] tda829x 0-004b: tda8290 not locked, no signal?
[ 48.969877] tda829x 0-004b: tda8290 not locked, no signal?
[ 49.074917] tda829x 0-004b: adjust gain, step 1. Agc: 0, ADC stat: 0,
lock: 0
[ 49.215687] tda829x 0-004b: adjust gain, step 2. Agc: 204, lock: 0
[ 49.360883] tda829x 0-004b: adjust gain, step 3. Agc: 108
[ 49.498617] saa7133[0]: registered device video0 [v4l2]
[ 49.498763] saa7133[0]: registered device vbi0
[ 49.498904] saa7133[0]: registered device radio0
[ 49.498985] tuner' 0-004b: Cmd TUNER_SET_STANDBY accepted for analog TV
[ 49.578852] saa7134 ALSA driver for DMA sound loaded
[ 49.578881] saa7133[0]/alsa: saa7133[0] at 0xfebff800 irq 17
registered as card -2
[ 49.691172] tda827x: tda827x_attach:
[ 49.691176] tda827x: type set to Philips TDA827X
[ 49.691179] DVB: registering new adapter (saa7133[0])
[ 49.691182] DVB: registering frontend 0 (Philips TDA10046H DVB-T)...
[ 49.791118] tda1004x: setting up plls for 48MHz sampling clock
[ 50.155058] tda1004x: found firmware revision 29 -- ok
[ 50.575001] tda827x: tda827xa tuner found
[ 50.575008] tda827x: tda827xa_sleep:
[ 50.659073] saa7133[0]/dvb: setting GPIO21 to 1 (Radio antenna?)
-> ... here start viewing analog tv via tvtime
[ 83.314648] tuner' 0-004b: Cmd VIDIOC_S_STD accepted for analog TV
[ 83.314655] tuner' 0-004b: tv freq set to 400.00
[ 83.314659] tda829x 0-004b: setting tda829x to system B
[ 83.425824] tda827x: setting tda827x to system B
[ 83.501861] tda827x: AGC2 gain is: 10
[ 83.837806] tda829x 0-004b: tda8290 not locked, no signal?
[ 83.957786] tda829x 0-004b: tda8290 not locked, no signal?
[ 84.077767] tda829x 0-004b: tda8290 not locked, no signal?
[ 84.181759] tda829x 0-004b: adjust gain, step 1. Agc: 0, ADC stat: 0,
lock: 0
[ 84.329729] tda829x 0-004b: adjust gain, step 2. Agc: 246, lock: 0
[ 84.477703] tda829x 0-004b: adjust gain, step 3. Agc: 153
[ 84.621780] tuner' 0-004b: tv freq set to 400.00
[ 84.621786] tda829x 0-004b: setting tda829x to system B
[ 84.733660] tda827x: setting tda827x to system B
[ 84.801649] tda827x: AGC2 gain is: 9
[ 85.129600] tda829x 0-004b: tda8290 not locked, no signal?
[ 85.249595] tda829x 0-004b: tda8290 not locked, no signal?
[ 85.369563] tda829x 0-004b: tda8290 not locked, no signal?
[ 85.473542] tda829x 0-004b: adjust gain, step 1. Agc: 0, ADC stat: 0,
lock: 0
[ 85.617517] tda829x 0-004b: adjust gain, step 2. Agc: 212, lock: 0
[ 85.761495] tda829x 0-004b: adjust gain, step 3. Agc: 113
[ 85.897539] tuner' 0-004b: tv freq set to 400.00
[ 85.897545] tda829x 0-004b: setting tda829x to system B
[ 86.005458] tda827x: setting tda827x to system B
[ 86.073445] tda827x: AGC2 gain is: 9
[ 86.401398] tda829x 0-004b: tda8290 not locked, no signal?
[ 86.521372] tda829x 0-004b: tda8290 not locked, no signal?
[ 86.641353] tda829x 0-004b: tda8290 not locked, no signal?
[ 86.745337] tda829x 0-004b: adjust gain, step 1. Agc: 0, ADC stat: 0,
lock: 0
[ 86.889316] tda829x 0-004b: adjust gain, step 2. Agc: 204, lock: 0
[ 87.033290] tda829x 0-004b: adjust gain, step 3. Agc: 106
[ 87.230182] tuner' 0-004b: tv freq set to 400.00
[ 87.230191] tda829x 0-004b: setting tda829x to system B
[ 87.341241] tda827x: setting tda827x to system B
[ 87.409229] tda827x: AGC2 gain is: 9
[ 87.737177] tda829x 0-004b: tda8290 not locked, no signal?
[ 87.857157] tda829x 0-004b: tda8290 not locked, no signal?
[ 87.977138] tda829x 0-004b: tda8290 not locked, no signal?
[ 88.081122] tda829x 0-004b: adjust gain, step 1. Agc: 0, ADC stat: 0,
lock: 0
[ 88.225098] tda829x 0-004b: adjust gain, step 2. Agc: 212, lock: 0
[ 88.369076] tda829x 0-004b: adjust gain, step 3. Agc: 113
[ 88.505137] tuner' 0-004b: tv freq set to 400.00
[ 88.505143] tda829x 0-004b: setting tda829x to system B
[ 88.613036] tda827x: setting tda827x to system B
[ 88.681025] tda827x: AGC2 gain is: 8
[ 89.008972] tda829x 0-004b: tda8290 not locked, no signal?
[ 89.128955] tda829x 0-004b: tda8290 not locked, no signal?
[ 89.248951] tda829x 0-004b: tda8290 not locked, no signal?
[ 89.352917] tda829x 0-004b: adjust gain, step 1. Agc: 0, ADC stat: 0,
lock: 0
[ 89.496894] tda829x 0-004b: adjust gain, step 2. Agc: 204, lock: 0
[ 89.640871] tda829x 0-004b: adjust gain, step 3. Agc: 106
[ 89.869324] tuner' 0-004b: tv freq set to 209.25
[ 89.869332] tda829x 0-004b: setting tda829x to system B
[ 89.976818] tda827x: setting tda827x to system B
[ 90.044806] tda827x: AGC2 gain is: 9
[ 90.408754] tda829x 0-004b: tda8290 is locked, AGC: 255
[ 90.408761] tda829x 0-004b: adjust gain, step 1. Agc: 255, ADC stat:
0, lock: 128
[ 90.556725] tda829x 0-004b: adjust gain, step 2. Agc: 135, lock: 0
[ 93.410080] tuner' 0-004b: Cmd TUNER_SET_STANDBY accepted for analog TV
-> ... here start scanning via me-tv dvb-utils/scan
[ 95.744247] tda1004x: setting up plls for 48MHz sampling clock
[ 96.108190] tda1004x: found firmware revision 29 -- ok
[ 96.396146] tda827x: tda827x_init:
[ 96.396153] saa7133[0]/dvb: setting GPIO21 to 0 (TV antenna?)
[ 99.516901] tda827x: tda827xa_set_params:
[ 99.516908] tda827x: setting LNA to high gain
[ 99.724867] tda827x: tda8275a AGC2 gain is: 8
[ 108.659429] tda827x: tda827xa_set_params:
[ 108.659437] tda827x: setting LNA to high gain
[ 108.867394] tda827x: tda8275a AGC2 gain is: 8
[ 110.883074] tda827x: tda827xa_set_params:
[ 110.883081] tda827x: setting LNA to high gain
[ 111.091038] tda827x: tda8275a AGC2 gain is: 8
[ 116.882107] tda827x: tda827xa_set_params:
[ 116.882114] tda827x: setting LNA to high gain
[ 117.090068] tda827x: tda8275a AGC2 gain is: 8
[ 118.981766] tda827x: tda827xa_set_params:
[ 118.981773] tda827x: setting LNA to high gain
[ 119.189733] tda827x: tda8275a AGC2 gain is: 8
[ 121.297396] tda827x: tda827xa_set_params:
[ 121.297403] tda827x: setting LNA to high gain
[ 121.505361] tda827x: tda8275a AGC2 gain is: 8
[ 123.081110] tda827x: tda827xa_set_params:
[ 123.081118] tda827x: setting LNA to high gain
[ 123.289073] tda827x: tda8275a AGC2 gain is: 8
[ 124.864821] tda827x: tda827xa_set_params:
[ 124.864830] tda827x: setting LNA to high gain
[ 125.072786] tda827x: tda8275a AGC2 gain is: 8
[ 126.084630] tda827x: tda827xa_set_params:
[ 126.084639] tda827x: setting LNA to high gain
[ 126.292590] tda827x: tda8275a AGC2 gain is: 8
[ 127.868335] tda827x: tda827xa_set_params:
[ 127.868343] tda827x: setting LNA to high gain
[ 128.076300] tda827x: tda8275a AGC2 gain is: 8
[ 129.652048] tda827x: tda827xa_set_params:
[ 129.652054] tda827x: setting LNA to high gain
[ 129.860014] tda827x: tda8275a AGC2 gain is: 8
[ 130.871851] tda827x: tda827xa_set_params:
[ 130.871859] tda827x: setting LNA to high gain
[ 131.079818] tda827x: tda8275a AGC2 gain is: 8
[ 138.610606] tda827x: tda827xa_set_params:
[ 138.610614] tda827x: setting LNA to high gain
[ 138.818571] tda827x: tda8275a AGC2 gain is: 8
[ 140.394320] tda827x: tda827xa_set_params:
[ 140.394327] tda827x: setting LNA to high gain
[ 140.602284] tda827x: tda8275a AGC2 gain is: 8
[ 142.178031] tda827x: tda827xa_set_params:
[ 142.178038] tda827x: setting LNA to high gain
[ 142.386001] tda827x: tda8275a AGC2 gain is: 8
[ 143.397837] tda827x: tda827xa_set_params:
[ 143.397844] tda827x: setting LNA to high gain
[ 143.605803] tda827x: tda8275a AGC2 gain is: 8
[ 145.181549] tda827x: tda827xa_set_params:
[ 145.181556] tda827x: setting LNA to high gain
[ 145.389520] tda827x: tda8275a AGC2 gain is: 8
[ 146.965261] tda827x: tda827xa_set_params:
[ 146.965267] tda827x: setting LNA to high gain
[ 147.173226] tda827x: tda8275a AGC2 gain is: 8
[ 148.185065] tda827x: tda827xa_set_params:
[ 148.185071] tda827x: setting LNA to high gain
[ 148.393032] tda827x: tda8275a AGC2 gain is: 8
[ 149.968779] tda827x: tda827xa_set_params:
[ 149.968786] tda827x: setting LNA to high gain
[ 150.176743] tda827x: tda8275a AGC2 gain is: 8
[ 151.752490] tda827x: tda827xa_set_params:
[ 151.752498] tda827x: setting LNA to high gain
[ 151.960456] tda827x: tda8275a AGC2 gain is: 8
[ 152.972294] tda827x: tda827xa_set_params:
[ 152.972302] tda827x: setting LNA to high gain
[ 153.180262] tda827x: tda8275a AGC2 gain is: 8
[ 154.756008] tda827x: tda827xa_set_params:
[ 154.756014] tda827x: setting LNA to high gain
[ 154.963973] tda827x: tda8275a AGC2 gain is: 8
[ 156.539720] tda827x: tda827xa_set_params:
[ 156.539726] tda827x: setting LNA to high gain
[ 156.747686] tda827x: tda8275a AGC2 gain is: 8
[ 157.759524] tda827x: tda827xa_set_params:
[ 157.759532] tda827x: setting LNA to high gain
[ 157.967489] tda827x: tda8275a AGC2 gain is: 8
[ 159.543237] tda827x: tda827xa_set_params:
[ 159.543244] tda827x: setting LNA to high gain
[ 159.751203] tda827x: tda8275a AGC2 gain is: 8
[ 161.326950] tda827x: tda827xa_set_params:
[ 161.326956] tda827x: setting LNA to high gain
[ 161.534915] tda827x: tda8275a AGC2 gain is: 8
[ 162.546754] tda827x: tda827xa_set_params:
[ 162.546761] tda827x: setting LNA to high gain
[ 162.754721] tda827x: tda8275a AGC2 gain is: 8
[ 164.330466] tda827x: tda827xa_set_params:
[ 164.330473] tda827x: setting LNA to high gain
[ 164.538432] tda827x: tda8275a AGC2 gain is: 8
[ 166.114178] tda827x: tda827xa_set_params:
[ 166.114184] tda827x: setting LNA to high gain
[ 166.322145] tda827x: tda8275a AGC2 gain is: 8
[ 167.333983] tda827x: tda827xa_set_params:
[ 167.333990] tda827x: setting LNA to high gain
[ 167.541949] tda827x: tda8275a AGC2 gain is: 8
[ 169.117696] tda827x: tda827xa_set_params:
[ 169.117703] tda827x: setting LNA to high gain
[ 169.325661] tda827x: tda8275a AGC2 gain is: 8
[ 170.901411] tda827x: tda827xa_set_params:
[ 170.901417] tda827x: setting LNA to high gain
[ 171.109374] tda827x: tda8275a AGC2 gain is: 8
[ 172.121213] tda827x: tda827xa_set_params:
[ 172.121220] tda827x: setting LNA to high gain
[ 172.329177] tda827x: tda8275a AGC2 gain is: 8
[ 173.904926] tda827x: tda827xa_set_params:
[ 173.904932] tda827x: setting LNA to high gain
[ 174.112891] tda827x: tda8275a AGC2 gain is: 8
[ 175.688638] tda827x: tda827xa_set_params:
[ 175.688644] tda827x: setting LNA to high gain
[ 175.896603] tda827x: tda8275a AGC2 gain is: 8
[ 176.908442] tda827x: tda827xa_set_params:
[ 176.908448] tda827x: setting LNA to high gain
[ 177.116409] tda827x: tda8275a AGC2 gain is: 8
[ 183.579369] tda827x: tda827xa_set_params:
[ 183.579378] tda827x: setting LNA to high gain
[ 183.787333] tda827x: tda8275a AGC2 gain is: 8
[ 194.533604] tda827x: tda827xa_set_params:
[ 194.533612] tda827x: setting LNA to high gain
[ 194.741569] tda827x: tda8275a AGC2 gain is: 8
[ 202.352347] tda827x: tda827xa_set_params:
[ 202.352355] tda827x: setting LNA to high gain
[ 202.560312] tda827x: tda8275a AGC2 gain is: 8
[ 209.199244] tda827x: tda827xa_set_params:
[ 209.199252] tda827x: setting LNA to high gain
[ 209.407211] tda827x: tda8275a AGC2 gain is: 8
[ 220.245465] tda827x: tda827xa_set_params:
[ 220.245473] tda827x: setting LNA to high gain
[ 220.489426] tda827x: tda8275a AGC2 gain is: 8
[ 228.678486] tda827x: tda827xa_set_params:
[ 228.678494] tda827x: setting LNA to high gain
[ 228.890780] tda827x: tda8275a AGC2 gain is: 8
[ 237.136138] tda827x: tda827xa_sleep:
[ 237.208124] saa7133[0]/dvb: setting GPIO21 to 1 (Radio antenna?)
6) Herman mentioned something called a "mode-switch" in the archives,
but not any description.
I tried to find some data sheets for tda8275 tda8290 but only found the
publicity pdf file from Phillips,
so at least I can see they go together, so I presume this "mode-switch"
is coded into those modules.
But those modules work for all other cards, so now I'm lost again.
What else should I try?
Regards,
Tim
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
