Hartmut Hackmann wrote:
> Hi,
>
> timf schrieb:
>> Hartmut Hackmann wrote:
>>> Hi, Tim
>>> <snip>
>>>>>
>>>>> I think i know now how your card needs to be configured.
>>>>> Something that seems not to be really clear for you is the
>>>>> configuration
>>>>> of the so-called AGC (automatic gain control) of the tuner. This
>>>>> needs to be switched according to the function the tuner is used for:
>>>>> analog TV -> FM Radio -> DVB-T.
>>>>> This is done with the 4052 analog mux and requires 2 control bits
>>>>> -> the GPIOs.
>>>>> GPIO 21 is used to switch between analog TV and FM radio.
>>>>> Typically GPIO21=0 -> analog TV, GPIO21=1 -> FM Radio.
>>>>> In your case, GPIO22 is used to switch between DVB-T and analog
>>>>> while most cards
>>>>> use GPIO1 of the tda10046 for this.
>>>>>
>>>>> You should need to make chages only in saa7134-dvb, dvb_init()
>>>>> - remove the old
>>>>> case SAA7134_BOARD_KWORLD_DVBT_210: (plus code)
>>>>> -and add it to
>>>>> case SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS:
>>>>>
>>>>> That should do it (though we should add a .antenna switch to the
>>>>> configuration).
>>>>>
>>>>> Best regards
>>>>> Hartmut
>>>>>
>>>> Hi Hartmut,
>>>>
>>>>
>
> <snip>
>
>> Hi Hartmut,
>>
>>
>> 1) With .gpio_config = TDA10046_GP11_I,
>>
>> root@ubuntu:/home/timf# tzap -r "TEN HD"
>> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
>> tuning to 788500000 Hz
>> video pid 0x0202, audio pid 0x0000
>> status 00 | signal 9d9d | snr 3333 | ber 0001fffe | unc 0000004d |
>> status 1f | signal 9d9d | snr fdfd | ber 000001b8 | unc ffffffff |
>> FE_HAS_LOCK
>> status 1f | signal 9c9c | snr fdfd | ber 000001de | unc 00000000 |
>> FE_HAS_LOCK
>> status 1f | signal 9c9c | snr fefe | ber 0000017c | unc 00000000 |
>> FE_HAS_LOCK
>> status 1f | signal 9c9c | snr fefe | ber 00000182 | unc 00000000 |
>> FE_HAS_LOCK
>> status 1f | signal 9c9c | snr fefe | ber 000001a4 | unc 00000000 |
>> FE_HAS_LOCK
>> status 1f | signal 9b9b | snr fefe | ber 00000202 | unc 00000000 |
>> FE_HAS_LOCK
>> status 1f | signal 9b9b | snr fefe | ber 0000021c | unc 00000000 |
>> FE_HAS_LOCK
>> status 1f | signal 9b9b | snr fefe | ber 00000226 | unc 00000000 |
>> FE_HAS_LOCK
>> status 1f | signal 9c9c | snr fefe | ber 00000234 | unc 00000000 |
>> FE_HAS_LOCK
>> status 1f | signal 9b9b | snr fefe | ber 00000290 | unc 00000000 |
>> FE_HAS_LOCK
>> status 1f | signal 9b9b | snr fefe | ber 00000240 | unc 00000000 |
>> FE_HAS_LOCK
>> status 1f | signal 9c9c | snr fefe | ber 000001fa | unc 00000000 |
>> FE_HAS_LOCK
>>
>> Analog-tv also scans fine.
>>
>
> Things should look like this.
>
>> 2) With
>> // .gpio_config = TDA10046_GP11_I,
>> .gpio_config = TDA10046_GP00_I,
>>
>> timf@ubuntu:~$ sudo -s -H
>> [sudo] password for timf:
>> root@ubuntu:/home/timf# tzap -r "TEN HD"
>> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
>> tuning to 788500000 Hz
>> video pid 0x0202, audio pid 0x0000
>> status 00 | signal 0000 | snr 9494 | ber 0001fffe | unc 00000000 |
>> status 1f | signal 0000 | snr ecec | ber 00019622 | unc ffffffff |
>> FE_HAS_LOCK
>> status 1f | signal 0000 | snr f8f8 | ber 00014eac | unc ffffffff |
>> FE_HAS_LOCK
>> status 00 | signal 0000 | snr 5e5e | ber 0001fffe | unc 00000000 |
>> status 1f | signal 0000 | snr fcfc | ber 00002bcc | unc ffffffff |
>> FE_HAS_LOCK
>> status 1f | signal 0000 | snr fdfd | ber 000018a2 | unc 00000000 |
>> FE_HAS_LOCK
>> status 1f | signal 0000 | snr fdfd | ber 00000e74 | unc 00000000 |
>> FE_HAS_LOCK
>> status 1f | signal 0000 | snr fdfd | ber 00000912 | unc 00000000 |
>> FE_HAS_LOCK
>> status 1f | signal 0000 | snr fefe | ber 000006b6 | unc 00000000 |
>> FE_HAS_LOCK
>> status 1f | signal 0000 | snr fefe | ber 0000068e | unc 00000000 |
>> FE_HAS_LOCK
>> status 1f | signal 0000 | snr fdfd | ber 000005c2 | unc 00000000 |
>> FE_HAS_LOCK
>> status 1f | signal 0000 | snr fefe | ber 00000584 | unc 00000000 |
>> FE_HAS_LOCK
>>
>> However, analog-tv fails to scan anything -> "no signal"
>>
> This is wrong. Although the channel decoder locks, the signal at its
> input is very low.
>
> But this means: The analog -> dvb switch is the GPIO of the channel
> decoder
> *not* GPIO22
>
> so we can fix: we need .gpio_config = TDA10046_GP11_I
>
>> 3) antenna_switch
>>
>> static int philips_tda827x_tuner_init(struct dvb_frontend *fe)
>> {
>> struct saa7134_dev *dev = fe->dvb->priv;
>> struct tda1004x_state *state = fe->demodulator_priv;
>>
>> switch (state->config->antenna_switch) {
>> case 0: break;
>> case 1: dprintk("setting GPIO21 to 0 (TV antenna?)\n");
>> saa7134_set_gpio(dev, 21, 0);
>> break;
>> case 2: dprintk("setting GPIO21 to 1 (Radio antenna?)\n");
>> saa7134_set_gpio(dev, 21, 1);
>> break;
>> }
>> return 0;
>> }
>>
>> static int philips_tda827x_tuner_sleep(struct dvb_frontend *fe)
>> {
>> struct saa7134_dev *dev = fe->dvb->priv;
>> struct tda1004x_state *state = fe->demodulator_priv;
>>
>> switch (state->config->antenna_switch) {
>> case 0: break;
>> case 1: dprintk("setting GPIO21 to 1 (Radio antenna?)\n");
>> saa7134_set_gpio(dev, 21, 1);
>> break;
>> case 2: dprintk("setting GPIO21 to 0 (TV antenna?)\n");
>> saa7134_set_gpio(dev, 21, 0);
>> break;
>> }
>> return 0;
>> }
>>
>> If I put .antenna_switch = 1 or 2, in my struct, dvb-t fails to scan.
>> I can't put antenna_switch in my struct, can I, as I am using gpio22?
>> So I took it out, and in saa7134-cards.c, changed .radio to this:
>>
> I don't believe that this is right.
> It is just a static signal and can't be anything else.
>
>> [SAA7134_BOARD_KWORLD_DVBT_210] = {
>> .name = "KWorld DVB-T 210",
>> .audio_clock = 0x00187de7,
>> .tuner_type = TUNER_PHILIPS_TDA8290,
>> .radio_type = UNSET,
>> .tuner_addr = ADDR_UNSET,
>> .radio_addr = ADDR_UNSET,
>> .mpeg = SAA7134_MPEG_DVB,
>> .gpiomask = 0 << 21,
>> .inputs = {{
>> .name = name_tv,
>> .vmux = 1,
>> .amux = TV,
>> .tv = 1,
>> },{
>> .name = name_comp1,
>> .vmux = 3,
>> .amux = LINE1,
>> },{
>> .name = name_svideo,
>> .vmux = 8,
>> .amux = LINE1,
>> }},
>> .radio = {
>> .name = name_radio,
>> .amux = TV,
>> .gpio = 0x00000000,
>
> This is wrong. It has to be .gpio = 0x0200000, as it was in the original
> source code.
>
>> },
>> },
>> I still can't tune to a radio cahnnel.
>> I'm not sure how to switch to radio, I'm not even sure which gpio
>> it's on.
>> I assume it's on gpio21, but I've tried various configs - none work.
>>
>> Regards,
>> Tim
>>
> Tim, seriously: For me it looks like you messed up the entire code. I
> would
> recommend you roll back completely and start over again.
>
>
> Hartmut
>
OK, this is using v4l-dvb as downloaded via mercurial 9 April2008.
No modifications.
root@ubuntu:/home/timf# tzap -r "TEN HD"
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
tuning to 788500000 Hz
video pid 0x0202, audio pid 0x0000
status 00 | signal 9e9e | snr 5d5d | ber 0001fffe | unc 00000000 |
status 1f | signal 9d9d | snr fdfd | ber 0000010c | unc 00000000 |
FE_HAS_LOCK
status 1f | signal 9d9d | snr fefe | ber 00000104 | unc 00000000 |
FE_HAS_LOCK
status 1f | signal 9d9d | snr fefe | ber 00000106 | unc 00000000 |
FE_HAS_LOCK
status 1f | signal 9d9d | snr fefe | ber 00000116 | unc 00000000 |
FE_HAS_LOCK
status 1f | signal 9d9d | snr fefe | ber 0000010e | unc 00000000 |
FE_HAS_LOCK
status 1f | signal 9d9d | snr fefe | ber 000000f6 | unc 00000000 |
FE_HAS_LOCK
status 1f | signal 9d9d | snr fefe | ber 0000012c | unc 00000000 |
FE_HAS_LOCK
status 1f | signal 9d9d | snr fefe | ber 00000108 | unc 00000000 |
FE_HAS_LOCK
status 1f | signal 9c9c | snr fefe | ber 0000011e | unc 00000000 |
FE_HAS_LOCK
status 1f | signal 9c9c | snr fefe | ber 00000114 | unc 00000000 |
FE_HAS_LOCK
status 1f | signal 9d9d | snr fefe | ber 000000f4 | unc 00000000 |
FE_HAS_LOCK
status 1f | signal 9c9c | snr fefe | ber 0000010e | unc 00000000 |
FE_HAS_LOCK
status 1f | signal 9c9c | snr fefe | ber 0000013a | unc 00000000 |
FE_HAS_LOCK
status 1f | signal 9c9c | snr fefe | ber 00000232 | unc 00000000 |
FE_HAS_LOCK
Analog-tv - "no signal" - no channels scanned
Regards,
Tim
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
