Dear friends......... I have done # tail -f /var/log/messages before dialing with wvdial........ When i had NOT given carrier check=no,the following output came in the wvdial, root@slax:~# wvdial --> WvDial: Internet dialer version 1.60 --> Initializing modem. --> Sending: ATZ ATZ OK --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 OK --> Modem initialized. --> Sending: ATDT172222 --> Waiting for carrier. ATDT172222 CONNECT 45333 V42bis --> Carrier detected. Waiting for prompt. --> Connected, but carrier signal lost! Retrying... --> Sending: ATDT172222 --> Waiting for carrier. Welcome to UTStarcom Total Control HiPer ARC (TM) Networks That Go The Distance (TM) login: NO CARRIER --> No Carrier! Trying again. --> Sending: ATDT172222 --> Waiting for carrier. ATDT172222 CONNECT 45333 V42bis --> Carrier detected. Waiting for prompt. --> Connected, but carrier signal lost! Retrying... --> Sending: ATDT172222 --> Waiting for carrier. Welcome to UTStarcom Total Control HiPer ARC (TM) Networks That Go The Distance (TM) login: NO CARRIER --> No Carrier! Trying again. --> Sending: ATDT172222 --> Waiting for carrier. ATDT172222 ^CCaught signal 2: Attempting to exit gracefully... --> Disconnecting at Sat Oct 10 16:34:04 2009 root@slax:~# wvdial --> WvDial: Internet dialer version 1.60 --> Initializing modem. --> Sending: ATZ ATZ OK --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 OK --> Modem initialized. --> Sending: ATDT172222 --> Waiting for carrier. ATDT172222 CONNECT 45333 V42bis --> Carrier detected. Waiting for prompt. --> Connected, but carrier signal lost! Retrying... --> Sending: ATDT172222 --> Waiting for carrier. Welcome to UTStarcom Total Control HiPer ARC (TM) Networks That Go The Distance (TM) login: NO CARRIER --> No Carrier! Trying again. --> Sending: ATDT172222 --> Waiting for carrier. ATDT172222 CONNECT 45333 V42bis --> Carrier detected. Waiting for prompt. --> Connected, but carrier signal lost! Retrying... --> Sending: ATDT172222 --> Waiting for carrier. Welcome to UTStarcom Total Control HiPer ARC (TM) Networks That Go The Distance (TM) login: NO CARRIER --> No Carrier! Trying again. --> Sending: ATDT172222 --> Waiting for carrier. ATDT172222 CONNECT 45333 V42bis --> Carrier detected. Waiting for prompt. --> Connected, but carrier signal lost! Retrying... --> Sending: ATDT172222 --> Waiting for carrier. Welcome to UTStarcom Total Control HiPer ARC (TM) Networks That Go The Distance (TM) login: NO CARRIER --> No Carrier! --> Sending: ATD --> Waiting for ATDT172222 CONNECT 45333 V42bis --> Carrier detected. Waiting for prompt. --> Connected, but carrier signal lost! Retrying... --> Sending: ATDT172222 --> Waiting for carrier. Welcome to UTStarcom Total Control HiPer ARC (TM) Networks That Go The Distance (TM) login: NO CARRIER --> No Carrier! Trying again. --> Sending: ATDT172222 --> Waiting for carrier. ATDT172222 CONNECT 45333 V42bis --> Carrier detected. Waiting for prompt. --> Connected, but carrier signal lost! Retrying... --> Sending: ATDT172222 --> Waiting for carrier. Welcome to UTStarcom Total Control HiPer ARC (TM) Networks That Go The Distance (TM) login: NO CARRIER --> No Carrier! Trying again. --> Sending: ATDT172222 --> Waiting for carrier. ATDT172222 CONNECT 45333 V42bis --> Carrier detected. Waiting for prompt. --> Connected, but carrier signal lost! Retrying... --> Sending: ATDT172222 --> Waiting for carrier. Welcome to UTStarcom Total Control HiPer ARC (TM) Networks That Go The Distance (TM) login: NO CARRIER --> No Carrier! Trying again. --> Sending: ATDT172222 --> Waiting for carrier. ATDT172222 ^CCaught signal 2: Attempting to exit gracefully... --> Disconnecting at Sat Oct 10 16:38:51 2009 But when i gave carrier check = no,the computer hanged , the log file is given below........... Oct 10 16:24:42 (none) init: Switching to runlevel: 4 Oct 10 16:24:42 (none) acpid: client connected from 5724[0:0] Oct 10 16:24:42 (none) acpid: 1 client rule loaded Oct 10 16:24:43 (none) kernel: [drm] Initialized drm 1.1.0 20060810 Oct 10 16:24:43 (none) kernel: pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Oct 10 16:24:43 (none) kernel: [drm] Initialized i915 1.6.0 20060119 on minor 0 Oct 10 16:27:51 (none) kernel: agrsm 0000:05:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 Oct 10 16:27:51 (none) kernel: agrsm: created 1 infos Oct 10 16:27:51 (none) kernel: ttyAGS3 at I/O 0x1000 (irq = 21) is a AgereModem Oct 10 16:27:51 (none) kernel: agrserial: Loading module Agere Modem Interface driver version 2.1.60.0.Linspire (2005-11-16) Oct 10 16:43:42 (none) kernel: PPP generic driver version 2.4.2 Oct 10 16:43:42 (none) pppd[9811]: pppd 2.4.4 started by root, uid 0 Oct 10 16:43:43 (none) pppd[9811]: Using interface ppp0 Oct 10 16:43:43 (none) pppd[9811]: Connect: ppp0 <--> /dev/ttyAGS3 Oct 10 16:43:45 (none) kernel: PPP BSD Compression module registered Oct 10 16:43:45 (none) kernel: PPP Deflate Compression module registered Oct 10 16:43:46 (none) pppd[9811]: local IP address 61.2.192.101 Oct 10 16:43:46 (none) pppd[9811]: remote IP address 61.1.254.12 Oct 10 16:43:46 (none) pppd[9811]: primary DNS address 218.248.240.23 Oct 10 16:43:46 (none) pppd[9811]: secondary DNS address 218.248.240.135 On 27/09/2009, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> wrote: > Sreehari, > > As mentioned earlier, for your 11c1:0620 chipset modem, do NOT use > Carrier Check = no > > Also use you regular login name. > > As Antonio mentioned earlier, we need details on the failure. Before > starting a dial up, do: > # tail -f /var/log/messages > > Then open a 2nd console to do the dialout from. > After the failure, send the List the record from the /var/log/messages > > MarvS > > On Sun, Sep 27, 2009 at 2:30 AM, Sreehari. T. <sreeharigvr@xxxxxxxxx> > wrote: >> I have used login name as instructed by you......... >> But it says wrong loginname....... >> I added carrier check =no,(with usual login name) >> then it is trying to connect again and again but not connecting..... >> after some time (ie after several times trying to connect ) slax >> hangs............ >> Please help me........... >> >> >> On 29/08/2009, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> wrote: >>> With modem Agere Systems Unknown device 0620" >>> CLASS=0780 >>> PCIDEV=11c1:0620 >>> >>> Dialout should not require a >>> Carrier Check = no >>> >>> It could be a protocol problem, occurring after the CONNECT has been >>> achieved. >>> >>> Sreehari, >>> >>> Assuming that your IP (Iinternet provider) is UTStar.com >>> Instead of your LoginName use: UTSstar.com/LoginName >>> This is a syntax required by IPs which use the CHAP verification >>> protocol. >>> >>> Report back. >>> >>> MarvS >>> >>> >>> >>> On Sat, Aug 29, 2009 at 9:32 AM, Antonio >>> Olivares<olivares14031@xxxxxxxxx> wrote: >>>> On 8/29/09, Sreehari. T. <sreeharigvr@xxxxxxxxx> wrote: >>>>> On 12/08/2009, Antonio Olivares <olivares14031@xxxxxxxxx> wrote: >>>>>> >>>>>> Sreehari, >>>>>> >>>>>> Do download wvstreams + wvdial: >>>>>> >>>>>> http://www.slax.org/modules.php?action=detail&id=624 >>>>>> >>>>>> http://www.slax.org/modules.php?action=detail&id=368 >>>>>> >>>>>> Regards, >>>>>> >>>>>> >>>>>> Antonio >>>>>> >>>>>> >>>>>> On 8/12/09, Sreehari. T. <sreeharigvr@xxxxxxxxx> wrote: >>>>>> > I am trying from slax 6.1.2 >>>>>> > Can you post the link of wvdial ................... >>>>>> > >>>>>> > 2009/8/12 Antonio Olivares <olivares14031@xxxxxxxxx> >>>>>> > >>>>>> >> Sreehari, >>>>>> >> >>>>>> >> Are you trying this from Slax 6.1.1 or from Slax 6.1.2? >>>>>> >> >>>>>> >> >>>>>> >> >>>>>> >> >>>>>> >> >>>>>> >> Aug 11 21:34:16 (none) /usr/sbin/gpm[5463]: *** info >>>>>> >> [startup.c(95)]: >>>>>> >> Aug 11 21:34:16 (none) /usr/sbin/gpm[5463]: Started gpm >>>>>> >> successfully. >>>>>> >> Entered daemon mode. >>>>>> >> Aug 11 21:34:17 (none) acpid: client connected from 5513[0:0] >>>>>> >> Aug 11 21:34:17 (none) acpid: 1 client rule loaded >>>>>> >> Aug 11 21:34:21 (none) init: Switching to runlevel: 4 >>>>>> >> Aug 11 21:34:21 (none) acpid: client connected from 5710[0:0] >>>>>> >> Aug 11 21:34:21 (none) acpid: 1 client rule loaded >>>>>> >> Aug 11 21:34:23 (none) kernel: [drm] Initialized drm 1.1.0 >>>>>> >> 20060810 >>>>>> >> Aug 11 21:34:23 (none) kernel: pci 0000:00:02.0: PCI INT A -> GSI >>>>>> >> 16 >>>>>> >> (level, low) -> IRQ 16 >>>>>> >> Aug 11 21:34:23 (none) kernel: [drm] Initialized i915 1.6.0 >>>>>> >> 20060119 >>>>>> >> on >>>>>> >> minor 0 >>>>>> >> Aug 11 21:43:04 (none) kernel: agrsm 0000:05:00.0: PCI INT A -> >>>>>> >> GSI >>>>>> >> 21 >>>>>> >> (level, low) -> IRQ 21 >>>>>> >> Aug 11 21:43:04 (none) kernel: agrsm: created 1 infos >>>>>> >> Aug 11 21:43:04 (none) kernel: ttyAGS3 at I/O 0x1000 (irq = 21) is >>>>>> >> a >>>>>> >> AgereModem >>>>>> >> Aug 11 21:43:04 (none) kernel: agrserial: Loading module Agere >>>>>> >> Modem >>>>>> >> Interface driver version 2.1.60.0.Linspire (2005-11-16) >>>>>> >> Aug 11 21:43:37 (none) kernel: PPP generic driver version 2.4.2 >>>>>> >> Aug 11 21:43:37 (none) pppd[7870]: pppd 2.4.4 started by root, uid >>>>>> >> 0 >>>>>> >> >>>>>> >> Hugo has reported success but by using wvdial and wvstreams >>>>>> >> modules >>>>>> >> respectively. Do please try with using wvdial since KPPP in this >>>>>> >> case >>>>>> >> might be causing some problems. If the problem still persists >>>>>> >> while >>>>>> >> using wvdial, then there are other things that we may try to do. >>>>>> >> >>>>>> >> Regards, >>>>>> >> >>>>>> >> Antonio >>>>>> >> >>>>>> >> >>>>>> >> On 8/11/09, Sreehari. T. <sreeharigvr@xxxxxxxxx> wrote: >>>>>> >> > Dear antonio , >>>>>> >> > I have followed your instructions and created the asked file. >>>>>> >> > File has been attached.......... >>>>>> >> > When the last entry to the above file was made system hanged and >>>>>> >> > mouse >>>>>> >> > stood stilll.......... >>>>>> >> > then i was forced to press the reset button....... >>>>>> >> > This occurs every time i connect to net..... >>>>>> >> > i guess that there is a mistake in my kppp >>>>>> >> > configuration......... >>>>>> >> > Please send me the correct config for BSNL(my net provider) >>>>>> >> > INDIA........ >>>>>> >> > >>>>>> >> > >>>>>> >> > >>>>>> >> > >>>>>> >> > >>>>>> >> > On 06/08/2009, Antonio Olivares <olivares14031@xxxxxxxxx> wrote: >>>>>> >> >> Sreehari, >>>>>> >> >> >>>>>> >> >> When trying to connect, would you mind doing the following >>>>>> >> >> before >>>>>> >> >> connecting: >>>>>> >> >> >>>>>> >> >> open up a terminal and run >>>>>> >> >> # tail -f /var/log/messages >>>>>> >> >> >>>>>> >> >> and kppp dies with an error message, let us know what it >>>>>> >> >> is(back >>>>>> >> >> to >>>>>> >> >> list) others may have the same problem and maybe a workaround >>>>>> >> >> is >>>>>> >> >> found. Hope this helps and also thank you for testing the >>>>>> >> >> driver >>>>>> >> >> :) >>>>>> >> >> Hopefully it is a WIN WIN situation. >>>>>> >> >> >>>>>> >> >> Regards, >>>>>> >> >> >>>>>> >> >> Antonio >>>>>> >> >> >>>>>> >> >> On 8/5/09, Sreehari. T. <sreeharigvr@xxxxxxxxx> wrote: >>>>>> >> >>> Dear Antonio Olivares, >>>>>> >> >>> >>>>>> >> >>> Thanks For sending me the right driver............ >>>>>> >> >>> Now my modem is detected and dialing . >>>>>> >> >>> But when "CONNECT" appears in log screen of KPPP dialer, >>>>>> >> >>> the system hangs.......... >>>>>> >> >>> Once it showed ppp error ........... >>>>>> >> >>> Please help me.......... >>>>>> >> >>> You are the only peson who has replied for my >>>>>> >> >>> request.......... >>>>>> >> >>> >>>>>> >> >>>>>> Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks................ >>>>>> >> >>> >>>>>> >> >>> On 27/07/2009, Antonio Olivares <olivares14031@xxxxxxxxx> >>>>>> >> >>> wrote: >>>>>> >> >>>> Sreehari, >>>>>> >> >>>> >>>>>> >> >>>> I have a confirmed report that slax can connect with the >>>>>> >> >>>> 11c1:0620 >>>>>> >> >>>> chipset. Here's the slax forum page: >>>>>> >> >>>> >>>>>> >> >>>> http://www.slax.org/forum.php?action=view&parentID=43687 >>>>>> >> >>>> >>>>>> >> >>>> and the module that should get the job done! >>>>>> >> >>>> >>>>>> >> >>>> http://www.slax.org/modules.php?action=detail&id=2593 >>>>>> >> >>>> >>>>>> >> >>>> Provided that there are no IRQ conflicts or sharing problems. >>>>>> >> >>>> I >>>>>> >> >>>> hope >>>>>> >> >>>> that it does work for you. In my case, I will be honest as I >>>>>> >> >>>> have >>>>>> >> >>>> not >>>>>> >> >>>> been able to get it to work, but I have one success report >>>>>> >> >>>> and >>>>>> >> >>>> I >>>>>> >> >>>> hope >>>>>> >> >>>> you add to the success statistic :) >>>>>> >> >>>> >>>>>> >> >>>> Regards, >>>>>> >> >>>> >>>>>> >> >>>> Antonio >>>>>> >> >>>> >>>>>> >> >>>> On 7/23/09, Sreehari. T. <sreeharigvr@xxxxxxxxx> wrote: >>>>>> >> >>>>> Modem data.txt attached with this mail.......... >>>>>> >> >>>>> Please help me to find the correct driver for my modem...... >>>>>> >> >>>>> Thanks in advance.. >>>>>> >> >>>>> >>>>>> >> >>>> >>>>>> >> >>> >>>>>> >> >> >>>>>> >> > >>>>>> >> >>>>>> > >>>>>> >>>>> I have dialed out with wvdial+wvstreams. Now the computer is not >>>>> hanging,but >>>>> can't connect to internet. The wvdial shown me the below >>>>> information...... >>>>> >>>>> >>>>> root@slax:~# wvdial >>>>> --> WvDial: Internet dialer version 1.60 >>>>> >>>>> --> Initializing modem. >>>>> --> Sending: ATZ >>>>> ATZ >>>>> OK >>>>> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>> ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>> OK >>>>> --> Modem initialized. >>>>> --> Sending: ATDT172222 >>>>> --> Waiting for carrier. >>>>> ATDT172222 >>>>> CONNECT 46666 V42bis >>>>> --> Carrier detected. Waiting for prompt. >>>>> --> Connected, but carrier signal lost! Retrying... >>>>> --> Sending: ATDT172222 >>>>> --> Waiting for carrier. >>>>> Welcome to UTStarcom Total Control HiPer ARC (TM) >>>>> Networks That Go The Distance (TM) >>>>> login: >>>>> login: >>>>> login: >>>>> NO CARRIER >>>>> --> No Carrier! Trying again. >>>>> --> Sending: ATDT172222 >>>>> --> Waiting for carrier. >>>>> ATDT172222 >>>>> CONNECT 45333 V42bis >>>>> --> Carrier detected. Waiting for prompt. >>>>> --> Connected, but carrier signal lost! Retrying... >>>>> --> Sending: ATDT172222 >>>>> --> Waiting for carrier. >>>>> Welcome to UTStarcom Total Control HiPer ARC (TM) >>>>> Networks That Go The Distance (TM) >>>>> login: >>>>> NO CARRIER >>>>> --> No Carrier! Trying again. >>>>> --> Sending: ATDT172222 >>>>> --> Waiting for carrier. >>>>> ATDT172222 >>>>> disconnect >>>>> NO CARRIER >>>>> --> No Carrier! Trying again. >>>>> >>>>> >>>>> Please reply soon................ >>>>> >>>> >>>> Sreehari, >>>> >>>> In your wvdial.conf file, do you have a line "Carrier Check = no" ?, >>>> if you don't please insert it and save your new wvdial.conf file and >>>> try to connect again. Report back to list(discuss@xxxxxxxxxxxxx) and >>>> cc to me if you like, but others can also help you too. >>>> >>>> Regards, >>>> >>>> Antonio >>>> >>> >> >
