Modem data.txt attached with this mail..........
Please help me to find the correct driver for my modem......
Thanks in advance..
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry
[1;32m===============================================================================[0;39m
[1;32m Welcome to Slax 6.1.1 [0;39m
[1;32m===============================================================================[0;39m
[1;29mThe system is up and running now.[0;29m
Login as "[1;29mroot[0;29m" with password "[1;29mtoor[0;29m", both without quotes, lowercase.
If you're new to Slax, visit http://www.slax.org/ for more info.
[1;29mAfter you login, try the following commands:[0;29m
mc ....... to start Midnight Commander (edit/copy/move/create/delete files)
startx ... to run Xwindow system with KDE in VESA mode 1024x768 at 75Hz
xconf .... to autoconfigure your graphics card for better performance
[1;29mOther commands you may find useful (for experts only!):[0;29m
activate ..... to insert (install) Slax module into the system on the fly
deactivate ... to remove (uninstall) Slax module from the root filesystem
mkfileswap ... to create a special file on your harddisk for virtual RAM
[1;32m When finished, use "poweroff" or "reboot" command and wait until it completes [0;39m
[1;32m===============================================================================[0;39m kernel 2.6.27.8
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686,
[1;32m===============================================================================[0;39m
[1;32m Welcome to Slax 6.1.1 [0;39m
[1;32m===============================================================================[0;39m
[1;29mThe system is up and running now.[0;29m
Login as "[1;29mroot[0;29m" with password "[1;29mtoor[0;29m", both without quotes, lowercase.
If you're new to Slax, visit http://www.slax.org/ for more info.
[1;29mAfter you login, try the following commands:[0;29m
mc ....... to start Midnight Commander (edit/copy/move/create/delete files)
startx ... to run Xwindow system with KDE in VESA mode 1024x768 at 75Hz
xconf .... to autoconfigure your graphics card for better performance
[1;29mOther commands you may find useful (for experts only!):[0;29m
activate ..... to insert (install) Slax module into the system on the fly
deactivate ... to remove (uninstall) Slax module from the root filesystem
mkfileswap ... to create a special file on your harddisk for virtual RAM
[1;32m When finished, use "poweroff" or "reboot" command and wait until it completes [0;39m
[1;32m===============================================================================[0;39m
Linux version 2.6.27.8 (root@darkstar) (gcc version 4.2.4) #1 SMP Sun Apr 12 22:55:24 Local time zone must be set--see zic
scanModem update of: 2009_07_02
The modem symbolic link is /dev/modem -> /dev/ttyAGS3
Modem drivers blocked from loading during bootup are listed in /etc/modprobe* file lines:
/etc/modprobe.d/blacklist:blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist:blacklist snd-via82xx-modem
/etc/modprobe.d/blacklist:blacklist snd-intel8x0m
Potentially useful modem drivers now loaded are:
snd_hda_intel
Attached USB devices are:
ID 0781:5151 SanDisk Corp. Cruzer Micro 256/512MB Flash Drive
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx
For candidate card in slot 05:00.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
05:00.0 11c1:0620 11c1:0620 Communication controller: Agere Systems Unknown device 0620
Modem interrupt assignment and sharing:
--- Bootup diagnostics for card in PCI slot 05:00.0 ----
PCI: 0000:05:00.0 reg 10 io port: [1000, 10ff]
pci 0000:05:00.0: PME# supported from D3hot D3cold
pci 0000:05:00.0: PME# disabled
The PCI slot 05:00.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1b.0 8086:2668 8086:e303 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW
Modem interrupt assignment and sharing:
16: 7188 IO-APIC-fasteoi uhci_hcd:usb5, HDA Intel, i915@pci:0000:00:02.0
--- Bootup diagnostics for card in PCI slot 00:1b.0 ----
PCI: 0000:00:1b.0 reg 10 64bit mmio: [301c0000, 301c3fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
HDA Intel 0000:00:1b.0: setting latency timer to 64
The PCI slot 00:1b.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.
The ALSA verion is 1.0.17
The modem cards detected by "aplay -l" are: None
The /proc/asound/pcm file reports:
-----------------------
00-04: ALC880 Analog : ALC880 Analog : capture 2
00-00: ALC880 Analog : ALC880 Analog : playback 1 : capture 1
about /proc/asound/cards:
------------------------
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0x301c0000 irq 16
PCI slot 00:1b.0 has a High Definition Audio Card
The drivers are in the kernel modules tree at:
/lib/modules/2.6.27.8/kernel/sound/pci/hda/snd-hda-intel.ko
UNEXPECTED HDA diagnostic outcome.
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 05:00.0:
Modem chipset detected on
NAME="Communication controller: Agere Systems Unknown device 0620"
CLASS=0780
PCIDEV=11c1:0620
SUBSYS=11c1:0620
IRQ=11
IDENT=agrsm
For candidate modem in: 05:00.0
0780 Communication controller: Agere Systems Unknown device 0620
Primary device ID: 11c1:0620
Support type needed or chipset: agrsm
Writing DOCs/Intel.txt
The AgereSystems/LSI agrsm code supports compiling of a agrmodem + agrsm driver pair.
One resource site is http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
Thereat get the agrsm_howto.txt and one of the agrsm-tools packages.
The initial agrsm_howto.txt compiling steps are only cogent to modems with PCI IDs:
11c1:0620, 11c1:048c and 11c1:048f chips.
They use the agrsm-20090418.tar.gz package.
The agrsm-tools sets a useful symbolic link and a agrsm-test utlity
For AgereSystems/LSI with Vendor 11c1 chips hosted on High Definition Audio cards, there may be support
through the agrsm resources (providing an agrmodem + agrserial driver pair) as an alternative to usage
of the snd-hda-intel driver + slmodemd helper. For the 11c11040 modem chip, ONLY the agrsm code is competent.
Your Linux distro's dkms package should be first installed, as it directs the installation of modem
specific dkms-agrsm resources, and also directs auto-installation of new drivers upon kernel upgrades.
Currently, the dkms-agrsm code is NOT competent for 2.26.28 and later kernels.
A short term fix is to install linux-image + linux-headers packages for earlier kernels.
For example, for Ubuntu Jaunty with 2.6.28 kernels, linux-image + linux-headers packages
for earlier 2.26.27 series Intrepid kernels can be installed. Search for them at:
http://packages.ubuntu.com
The primary dkms-agrsm resource site is http://linux.zsolttech.com/linmodem/agrsm/
whereat a few different packaging types are available. Debian type installers (supporting Ubuntu too)
are copied to http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ . Thereat the current package
is the dkms-agrsm_2.1.80-6_i386.deb is for Agere/LSI chipsets hosted on High Definition Audio cards.
Read the Modem/DOCs/Agrsm.txt for details.
-------------- end Agere Systems section -------------------
Predictive diagnostics for card in bus 00:1b.0:
Modem chipset not detected on
NAME="Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW "
CLASS=0403
PCIDEV=8086:2668
SUBSYS=8086:e303
IRQ=16
HDA=8086:2668
SOFT=8086:2668.HDA
High Definition Audio (HDA) cards MAY host a modem chip in their Subsystem,
and many are supported by the ALSA audio+modem driver snd-hda-intel
A modem was not detected on HDA card 8086:2668.
If another modem card is present, then most likely 8086:2668 does not host a modem.
If another modem card has not been detected, then possibilities are:
1) A Conexant modem chip is present on 8086:2668, as Conexant chips
are frequently not detectable by ALSA diagnostics
2) The modem may be of the older non-PCI Controller Chipset (hardware) type.
Try detection with Root permission:
wvdialconf /etc/wvdial.conf
For candidate modem in: 00:1b.0
0403 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW
Primary device ID: 8086:2668
Subsystem PCI_id 8086:e303
Softmodem codec or chipset from diagnostics:
from Archives:
Support type needed or chipset:
Support can likely be achieved through two mutually exclusive alternatives:
1) The hsfmodem software for Conexant chipset modems: Read DOCs/Conexant.txt
The following ALSA alternative CANNOT work with Conexant modems.
2) An ALSA modem driver plus slmodemd. Read DOCs/Smartlink.txt for details, and
to test get the package SLMODEMD.gcc4.2.tar.gz from:
http://linmodems.technion.ac.il/packages/smartlink/
Writing DOCs/Smartlink.txt
============ end Smartlink section =====================
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.2.4
and the compiler used in kernel assembly: 4.2.4
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.2
linuc_headers base folder /lib/modules/2.6.27.8/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwxr-xr-x 1 root root 366440 Jun 29 2006 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
crtscts
lock
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link: lrwxrwxrwx 1 root root 12 Jul 10 17:14 /dev/modem -> /dev/ttyAGS3
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
/etc/modprobe.d/blacklist:# ALSA modules to support sound modems. These should be loaded manually
/etc/modprobe.d/blacklist:blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist:blacklist snd-via82xx-modem
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
