Sreehari RE: Agere Modem Interface driver version 2.1.60.0.Linspire (2005-11-16) ----------- There is now a 2.1.80 update of this code package. Please uninstall your current drivers. >From http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ download and try the agrsm06pci-2.1.80~20090825.tar.gz MarvS On Wed, Oct 14, 2009 at 11:21 AM, Sreehari. T. <sreeharigvr@xxxxxxxxx> wrote: > Dear friends......... > > I have done # tail -f /var/log/messages before dialing with wvdial........ > When i had NOT given carrier check=no,the following output came in the wvdial, > > root@slax:~# wvdial > --> WvDial: Internet dialer version 1.60 > > --> Initializing modem. > --> Sending: ATZ > ATZ > OK > --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > OK > --> Modem initialized. > --> Sending: ATDT172222 > --> Waiting for carrier. > ATDT172222 > CONNECT 45333 V42bis > --> Carrier detected. Waiting for prompt. > --> Connected, but carrier signal lost! Retrying... > --> Sending: ATDT172222 > --> Waiting for carrier. > Welcome to UTStarcom Total Control HiPer ARC (TM) > Networks That Go The Distance (TM) > login: > NO CARRIER > --> No Carrier! Trying again. > --> Sending: ATDT172222 > --> Waiting for carrier. > ATDT172222 > CONNECT 45333 V42bis > --> Carrier detected. Waiting for prompt. > --> Connected, but carrier signal lost! Retrying... > --> Sending: ATDT172222 > --> Waiting for carrier. > Welcome to UTStarcom Total Control HiPer ARC (TM) > Networks That Go The Distance (TM) > login: > NO CARRIER > --> No Carrier! Trying again. > --> Sending: ATDT172222 > --> Waiting for carrier. > ATDT172222 > ^CCaught signal 2: Attempting to exit gracefully... > --> Disconnecting at Sat Oct 10 16:34:04 2009 > root@slax:~# wvdial > --> WvDial: Internet dialer version 1.60 > > --> Initializing modem. > --> Sending: ATZ > ATZ > OK > --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > OK > --> Modem initialized. > --> Sending: ATDT172222 > --> Waiting for carrier. > ATDT172222 > CONNECT 45333 V42bis > --> Carrier detected. Waiting for prompt. > --> Connected, but carrier signal lost! Retrying... > --> Sending: ATDT172222 > --> Waiting for carrier. > Welcome to UTStarcom Total Control HiPer ARC (TM) > Networks That Go The Distance (TM) > login: > NO CARRIER > --> No Carrier! Trying again. > --> Sending: ATDT172222 > --> Waiting for carrier. > ATDT172222 > CONNECT 45333 V42bis > --> Carrier detected. Waiting for prompt. > --> Connected, but carrier signal lost! Retrying... > --> Sending: ATDT172222 > --> Waiting for carrier. > Welcome to UTStarcom Total Control HiPer ARC (TM) > Networks That Go The Distance (TM) > login: > NO CARRIER > --> No Carrier! Trying again. > --> Sending: ATDT172222 > --> Waiting for carrier. > ATDT172222 > CONNECT 45333 V42bis > --> Carrier detected. Waiting for prompt. > --> Connected, but carrier signal lost! Retrying... > --> Sending: ATDT172222 > --> Waiting for carrier. > Welcome to UTStarcom Total Control HiPer ARC (TM) > Networks That Go The Distance (TM) > login: > NO CARRIER > --> No Carrier! > --> Sending: ATD > --> Waiting for > ATDT172222 > CONNECT 45333 V42bis > --> Carrier detected. Waiting for prompt. > --> Connected, but carrier signal lost! Retrying... > --> Sending: ATDT172222 > --> Waiting for carrier. > Welcome to UTStarcom Total Control HiPer ARC (TM) > Networks That Go The Distance (TM) > login: > NO CARRIER > --> No Carrier! Trying again. > --> Sending: ATDT172222 > --> Waiting for carrier. > ATDT172222 > CONNECT 45333 V42bis > --> Carrier detected. Waiting for prompt. > --> Connected, but carrier signal lost! Retrying... > --> Sending: ATDT172222 > --> Waiting for carrier. > Welcome to UTStarcom Total Control HiPer ARC (TM) > Networks That Go The Distance (TM) > login: > NO CARRIER > --> No Carrier! Trying again. > --> Sending: ATDT172222 > --> Waiting for carrier. > ATDT172222 > CONNECT 45333 V42bis > --> Carrier detected. Waiting for prompt. > --> Connected, but carrier signal lost! Retrying... > --> Sending: ATDT172222 > --> Waiting for carrier. > Welcome to UTStarcom Total Control HiPer ARC (TM) > Networks That Go The Distance (TM) > login: > NO CARRIER > --> No Carrier! Trying again. > --> Sending: ATDT172222 > --> Waiting for carrier. > ATDT172222 > ^CCaught signal 2: Attempting to exit gracefully... > --> Disconnecting at Sat Oct 10 16:38:51 2009 > > But when i gave carrier check = no,the computer hanged , > the log file is given below........... > > Oct 10 16:24:42 (none) init: Switching to runlevel: 4 > Oct 10 16:24:42 (none) acpid: client connected from 5724[0:0] > Oct 10 16:24:42 (none) acpid: 1 client rule loaded > Oct 10 16:24:43 (none) kernel: [drm] Initialized drm 1.1.0 20060810 > Oct 10 16:24:43 (none) kernel: pci 0000:00:02.0: PCI INT A -> GSI 16 > (level, low) -> IRQ 16 > Oct 10 16:24:43 (none) kernel: [drm] Initialized i915 1.6.0 20060119 on minor 0 > Oct 10 16:27:51 (none) kernel: agrsm 0000:05:00.0: PCI INT A -> GSI 21 > (level, low) -> IRQ 21 > Oct 10 16:27:51 (none) kernel: agrsm: created 1 infos > Oct 10 16:27:51 (none) kernel: ttyAGS3 at I/O 0x1000 (irq = 21) is a AgereModem > Oct 10 16:27:51 (none) kernel: agrserial: Loading module Agere Modem > Interface driver version 2.1.60.0.Linspire (2005-11-16) > Oct 10 16:43:42 (none) kernel: PPP generic driver version 2.4.2 > Oct 10 16:43:42 (none) pppd[9811]: pppd 2.4.4 started by root, uid 0 > Oct 10 16:43:43 (none) pppd[9811]: Using interface ppp0 > Oct 10 16:43:43 (none) pppd[9811]: Connect: ppp0 <--> /dev/ttyAGS3 > Oct 10 16:43:45 (none) kernel: PPP BSD Compression module registered > Oct 10 16:43:45 (none) kernel: PPP Deflate Compression module registered > Oct 10 16:43:46 (none) pppd[9811]: local IP address 61.2.192.101 > Oct 10 16:43:46 (none) pppd[9811]: remote IP address 61.1.254.12 > Oct 10 16:43:46 (none) pppd[9811]: primary DNS address 218.248.240.23 > Oct 10 16:43:46 (none) pppd[9811]: secondary DNS address 218.248.240.135 > > > On 27/09/2009, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> wrote: >> Sreehari, >> >> As mentioned earlier, for your 11c1:0620 chipset modem, do NOT use >> Carrier Check = no >> >> Also use you regular login name. >> >> As Antonio mentioned earlier, we need details on the failure. Before >> starting a dial up, do: >> # tail -f /var/log/messages >> >> Then open a 2nd console to do the dialout from. >> After the failure, send the List the record from the /var/log/messages >> >> MarvS >> >> On Sun, Sep 27, 2009 at 2:30 AM, Sreehari. T. <sreeharigvr@xxxxxxxxx> >> wrote: >>> I have used login name as instructed by you......... >>> But it says wrong loginname....... >>> I added carrier check =no,(with usual login name) >>> then it is trying to connect again and again but not connecting..... >>> after some time (ie after several times trying to connect ) slax >>> hangs............ >>> Please help me........... >>> >>> >>> On 29/08/2009, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> wrote: >>>> With modem Agere Systems Unknown device 0620" >>>> CLASS=0780 >>>> PCIDEV=11c1:0620 >>>> >>>> Dialout should not require a >>>> Carrier Check = no >>>> >>>> It could be a protocol problem, occurring after the CONNECT has been >>>> achieved. >>>> >>>> Sreehari, >>>> >>>> Assuming that your IP (Iinternet provider) is UTStar.com >>>> Instead of your LoginName use: UTSstar.com/LoginName >>>> This is a syntax required by IPs which use the CHAP verification >>>> protocol. >>>> >>>> Report back. >>>> >>>> MarvS >>>> >>>> >>>> >>>> On Sat, Aug 29, 2009 at 9:32 AM, Antonio >>>> Olivares<olivares14031@xxxxxxxxx> wrote: >>>>> On 8/29/09, Sreehari. T. <sreeharigvr@xxxxxxxxx> wrote: >>>>>> On 12/08/2009, Antonio Olivares <olivares14031@xxxxxxxxx> wrote: >>>>>>> >>>>>>> Sreehari, >>>>>>> >>>>>>> Do download wvstreams + wvdial: >>>>>>> >>>>>>> http://www.slax.org/modules.php?action=detail&id=624 >>>>>>> >>>>>>> http://www.slax.org/modules.php?action=detail&id=368 >>>>>>> >>>>>>> Regards, >>>>>>> >>>>>>> >>>>>>> Antonio >>>>>>> >>>>>>> >>>>>>> On 8/12/09, Sreehari. T. <sreeharigvr@xxxxxxxxx> wrote: >>>>>>> > I am trying from slax 6.1.2 >>>>>>> > Can you post the link of wvdial ................... >>>>>>> > >>>>>>> > 2009/8/12 Antonio Olivares <olivares14031@xxxxxxxxx> >>>>>>> > >>>>>>> >> Sreehari, >>>>>>> >> >>>>>>> >> Are you trying this from Slax 6.1.1 or from Slax 6.1.2? >>>>>>> >> >>>>>>> >> >>>>>>> >> >>>>>>> >> >>>>>>> >> >>>>>>> >> Aug 11 21:34:16 (none) /usr/sbin/gpm[5463]: *** info >>>>>>> >> [startup.c(95)]: >>>>>>> >> Aug 11 21:34:16 (none) /usr/sbin/gpm[5463]: Started gpm >>>>>>> >> successfully. >>>>>>> >> Entered daemon mode. >>>>>>> >> Aug 11 21:34:17 (none) acpid: client connected from 5513[0:0] >>>>>>> >> Aug 11 21:34:17 (none) acpid: 1 client rule loaded >>>>>>> >> Aug 11 21:34:21 (none) init: Switching to runlevel: 4 >>>>>>> >> Aug 11 21:34:21 (none) acpid: client connected from 5710[0:0] >>>>>>> >> Aug 11 21:34:21 (none) acpid: 1 client rule loaded >>>>>>> >> Aug 11 21:34:23 (none) kernel: [drm] Initialized drm 1.1.0 >>>>>>> >> 20060810 >>>>>>> >> Aug 11 21:34:23 (none) kernel: pci 0000:00:02.0: PCI INT A -> GSI >>>>>>> >> 16 >>>>>>> >> (level, low) -> IRQ 16 >>>>>>> >> Aug 11 21:34:23 (none) kernel: [drm] Initialized i915 1.6.0 >>>>>>> >> 20060119 >>>>>>> >> on >>>>>>> >> minor 0 >>>>>>> >> Aug 11 21:43:04 (none) kernel: agrsm 0000:05:00.0: PCI INT A -> >>>>>>> >> GSI >>>>>>> >> 21 >>>>>>> >> (level, low) -> IRQ 21 >>>>>>> >> Aug 11 21:43:04 (none) kernel: agrsm: created 1 infos >>>>>>> >> Aug 11 21:43:04 (none) kernel: ttyAGS3 at I/O 0x1000 (irq = 21) is >>>>>>> >> a >>>>>>> >> AgereModem >>>>>>> >> Aug 11 21:43:04 (none) kernel: agrserial: Loading module Agere >>>>>>> >> Modem >>>>>>> >> Interface driver version 2.1.60.0.Linspire (2005-11-16) >>>>>>> >> Aug 11 21:43:37 (none) kernel: PPP generic driver version 2.4.2 >>>>>>> >> Aug 11 21:43:37 (none) pppd[7870]: pppd 2.4.4 started by root, uid >>>>>>> >> 0 >>>>>>> >> >>>>>>> >> Hugo has reported success but by using wvdial and wvstreams >>>>>>> >> modules >>>>>>> >> respectively. Do please try with using wvdial since KPPP in this >>>>>>> >> case >>>>>>> >> might be causing some problems. If the problem still persists >>>>>>> >> while >>>>>>> >> using wvdial, then there are other things that we may try to do. >>>>>>> >> >>>>>>> >> Regards, >>>>>>> >> >>>>>>> >> Antonio >>>>>>> >> >>>>>>> >> >>>>>>> >> On 8/11/09, Sreehari. T. <sreeharigvr@xxxxxxxxx> wrote: >>>>>>> >> > Dear antonio , >>>>>>> >> > I have followed your instructions and created the asked file. >>>>>>> >> > File has been attached.......... >>>>>>> >> > When the last entry to the above file was made system hanged and >>>>>>> >> > mouse >>>>>>> >> > stood stilll.......... >>>>>>> >> > then i was forced to press the reset button....... >>>>>>> >> > This occurs every time i connect to net..... >>>>>>> >> > i guess that there is a mistake in my kppp >>>>>>> >> > configuration......... >>>>>>> >> > Please send me the correct config for BSNL(my net provider) >>>>>>> >> > INDIA........ >>>>>>> >> > >>>>>>> >> > >>>>>>> >> > >>>>>>> >> > >>>>>>> >> > >>>>>>> >> > On 06/08/2009, Antonio Olivares <olivares14031@xxxxxxxxx> wrote: >>>>>>> >> >> Sreehari, >>>>>>> >> >> >>>>>>> >> >> When trying to connect, would you mind doing the following >>>>>>> >> >> before >>>>>>> >> >> connecting: >>>>>>> >> >> >>>>>>> >> >> open up a terminal and run >>>>>>> >> >> # tail -f /var/log/messages >>>>>>> >> >> >>>>>>> >> >> and kppp dies with an error message, let us know what it >>>>>>> >> >> is(back >>>>>>> >> >> to >>>>>>> >> >> list) others may have the same problem and maybe a workaround >>>>>>> >> >> is >>>>>>> >> >> found. Hope this helps and also thank you for testing the >>>>>>> >> >> driver >>>>>>> >> >> :) >>>>>>> >> >> Hopefully it is a WIN WIN situation. >>>>>>> >> >> >>>>>>> >> >> Regards, >>>>>>> >> >> >>>>>>> >> >> Antonio >>>>>>> >> >> >>>>>>> >> >> On 8/5/09, Sreehari. T. <sreeharigvr@xxxxxxxxx> wrote: >>>>>>> >> >>> Dear Antonio Olivares, >>>>>>> >> >>> >>>>>>> >> >>> Thanks For sending me the right driver............ >>>>>>> >> >>> Now my modem is detected and dialing . >>>>>>> >> >>> But when "CONNECT" appears in log screen of KPPP dialer, >>>>>>> >> >>> the system hangs.......... >>>>>>> >> >>> Once it showed ppp error ........... >>>>>>> >> >>> Please help me.......... >>>>>>> >> >>> You are the only peson who has replied for my >>>>>>> >> >>> request.......... >>>>>>> >> >>> >>>>>>> >> >>>>>>> Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks................ >>>>>>> >> >>> >>>>>>> >> >>> On 27/07/2009, Antonio Olivares <olivares14031@xxxxxxxxx> >>>>>>> >> >>> wrote: >>>>>>> >> >>>> Sreehari, >>>>>>> >> >>>> >>>>>>> >> >>>> I have a confirmed report that slax can connect with the >>>>>>> >> >>>> 11c1:0620 >>>>>>> >> >>>> chipset. Here's the slax forum page: >>>>>>> >> >>>> >>>>>>> >> >>>> http://www.slax.org/forum.php?action=view&parentID=43687 >>>>>>> >> >>>> >>>>>>> >> >>>> and the module that should get the job done! >>>>>>> >> >>>> >>>>>>> >> >>>> http://www.slax.org/modules.php?action=detail&id=2593 >>>>>>> >> >>>> >>>>>>> >> >>>> Provided that there are no IRQ conflicts or sharing problems. >>>>>>> >> >>>> I >>>>>>> >> >>>> hope >>>>>>> >> >>>> that it does work for you. In my case, I will be honest as I >>>>>>> >> >>>> have >>>>>>> >> >>>> not >>>>>>> >> >>>> been able to get it to work, but I have one success report >>>>>>> >> >>>> and >>>>>>> >> >>>> I >>>>>>> >> >>>> hope >>>>>>> >> >>>> you add to the success statistic :) >>>>>>> >> >>>> >>>>>>> >> >>>> Regards, >>>>>>> >> >>>> >>>>>>> >> >>>> Antonio >>>>>>> >> >>>> >>>>>>> >> >>>> On 7/23/09, Sreehari. T. <sreeharigvr@xxxxxxxxx> wrote: >>>>>>> >> >>>>> Modem data.txt attached with this mail.......... >>>>>>> >> >>>>> Please help me to find the correct driver for my modem...... >>>>>>> >> >>>>> Thanks in advance.. >>>>>>> >> >>>>> >>>>>>> >> >>>> >>>>>>> >> >>> >>>>>>> >> >> >>>>>>> >> > >>>>>>> >> >>>>>>> > >>>>>>> >>>>>> I have dialed out with wvdial+wvstreams. Now the computer is not >>>>>> hanging,but >>>>>> can't connect to internet. The wvdial shown me the below >>>>>> information...... >>>>>> >>>>>> >>>>>> root@slax:~# wvdial >>>>>> --> WvDial: Internet dialer version 1.60 >>>>>> >>>>>> --> Initializing modem. >>>>>> --> Sending: ATZ >>>>>> ATZ >>>>>> OK >>>>>> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>>> ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>>> OK >>>>>> --> Modem initialized. >>>>>> --> Sending: ATDT172222 >>>>>> --> Waiting for carrier. >>>>>> ATDT172222 >>>>>> CONNECT 46666 V42bis >>>>>> --> Carrier detected. Waiting for prompt. >>>>>> --> Connected, but carrier signal lost! Retrying... >>>>>> --> Sending: ATDT172222 >>>>>> --> Waiting for carrier. >>>>>> Welcome to UTStarcom Total Control HiPer ARC (TM) >>>>>> Networks That Go The Distance (TM) >>>>>> login: >>>>>> login: >>>>>> login: >>>>>> NO CARRIER >>>>>> --> No Carrier! Trying again. >>>>>> --> Sending: ATDT172222 >>>>>> --> Waiting for carrier. >>>>>> ATDT172222 >>>>>> CONNECT 45333 V42bis >>>>>> --> Carrier detected. Waiting for prompt. >>>>>> --> Connected, but carrier signal lost! Retrying... >>>>>> --> Sending: ATDT172222 >>>>>> --> Waiting for carrier. >>>>>> Welcome to UTStarcom Total Control HiPer ARC (TM) >>>>>> Networks That Go The Distance (TM) >>>>>> login: >>>>>> NO CARRIER >>>>>> --> No Carrier! Trying again. >>>>>> --> Sending: ATDT172222 >>>>>> --> Waiting for carrier. >>>>>> ATDT172222 >>>>>> disconnect >>>>>> NO CARRIER >>>>>> --> No Carrier! Trying again. >>>>>> >>>>>> >>>>>> Please reply soon................ >>>>>> >>>>> >>>>> Sreehari, >>>>> >>>>> In your wvdial.conf file, do you have a line "Carrier Check = no" ?, >>>>> if you don't please insert it and save your new wvdial.conf file and >>>>> try to connect again. Report back to list(discuss@xxxxxxxxxxxxx) and >>>>> cc to me if you like, but others can also help you too. >>>>> >>>>> Regards, >>>>> >>>>> Antonio >>>>> >>>> >>> >> >
