I have used login name as instructed by you......... But it says wrong loginname....... I added carrier check =no,(with usual login name) then it is trying to connect again and again but not connecting..... after some time (ie after several times trying to connect ) slax hangs............ Please help me........... On 29/08/2009, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> wrote: > With modem Agere Systems Unknown device 0620" > CLASS=0780 > PCIDEV=11c1:0620 > > Dialout should not require a > Carrier Check = no > > It could be a protocol problem, occurring after the CONNECT has been > achieved. > > Sreehari, > > Assuming that your IP (Iinternet provider) is UTStar.com > Instead of your LoginName use: UTSstar.com/LoginName > This is a syntax required by IPs which use the CHAP verification protocol. > > Report back. > > MarvS > > > > On Sat, Aug 29, 2009 at 9:32 AM, Antonio > Olivares<olivares14031@xxxxxxxxx> wrote: >> On 8/29/09, Sreehari. T. <sreeharigvr@xxxxxxxxx> wrote: >>> On 12/08/2009, Antonio Olivares <olivares14031@xxxxxxxxx> wrote: >>>> >>>> Sreehari, >>>> >>>> Do download wvstreams + wvdial: >>>> >>>> http://www.slax.org/modules.php?action=detail&id=624 >>>> >>>> http://www.slax.org/modules.php?action=detail&id=368 >>>> >>>> Regards, >>>> >>>> >>>> Antonio >>>> >>>> >>>> On 8/12/09, Sreehari. T. <sreeharigvr@xxxxxxxxx> wrote: >>>> > I am trying from slax 6.1.2 >>>> > Can you post the link of wvdial ................... >>>> > >>>> > 2009/8/12 Antonio Olivares <olivares14031@xxxxxxxxx> >>>> > >>>> >> Sreehari, >>>> >> >>>> >> Are you trying this from Slax 6.1.1 or from Slax 6.1.2? >>>> >> >>>> >> >>>> >> >>>> >> >>>> >> >>>> >> Aug 11 21:34:16 (none) /usr/sbin/gpm[5463]: *** info >>>> >> [startup.c(95)]: >>>> >> Aug 11 21:34:16 (none) /usr/sbin/gpm[5463]: Started gpm >>>> >> successfully. >>>> >> Entered daemon mode. >>>> >> Aug 11 21:34:17 (none) acpid: client connected from 5513[0:0] >>>> >> Aug 11 21:34:17 (none) acpid: 1 client rule loaded >>>> >> Aug 11 21:34:21 (none) init: Switching to runlevel: 4 >>>> >> Aug 11 21:34:21 (none) acpid: client connected from 5710[0:0] >>>> >> Aug 11 21:34:21 (none) acpid: 1 client rule loaded >>>> >> Aug 11 21:34:23 (none) kernel: [drm] Initialized drm 1.1.0 20060810 >>>> >> Aug 11 21:34:23 (none) kernel: pci 0000:00:02.0: PCI INT A -> GSI 16 >>>> >> (level, low) -> IRQ 16 >>>> >> Aug 11 21:34:23 (none) kernel: [drm] Initialized i915 1.6.0 20060119 >>>> >> on >>>> >> minor 0 >>>> >> Aug 11 21:43:04 (none) kernel: agrsm 0000:05:00.0: PCI INT A -> GSI >>>> >> 21 >>>> >> (level, low) -> IRQ 21 >>>> >> Aug 11 21:43:04 (none) kernel: agrsm: created 1 infos >>>> >> Aug 11 21:43:04 (none) kernel: ttyAGS3 at I/O 0x1000 (irq = 21) is a >>>> >> AgereModem >>>> >> Aug 11 21:43:04 (none) kernel: agrserial: Loading module Agere Modem >>>> >> Interface driver version 2.1.60.0.Linspire (2005-11-16) >>>> >> Aug 11 21:43:37 (none) kernel: PPP generic driver version 2.4.2 >>>> >> Aug 11 21:43:37 (none) pppd[7870]: pppd 2.4.4 started by root, uid 0 >>>> >> >>>> >> Hugo has reported success but by using wvdial and wvstreams modules >>>> >> respectively. Do please try with using wvdial since KPPP in this >>>> >> case >>>> >> might be causing some problems. If the problem still persists while >>>> >> using wvdial, then there are other things that we may try to do. >>>> >> >>>> >> Regards, >>>> >> >>>> >> Antonio >>>> >> >>>> >> >>>> >> On 8/11/09, Sreehari. T. <sreeharigvr@xxxxxxxxx> wrote: >>>> >> > Dear antonio , >>>> >> > I have followed your instructions and created the asked file. >>>> >> > File has been attached.......... >>>> >> > When the last entry to the above file was made system hanged and >>>> >> > mouse >>>> >> > stood stilll.......... >>>> >> > then i was forced to press the reset button....... >>>> >> > This occurs every time i connect to net..... >>>> >> > i guess that there is a mistake in my kppp configuration......... >>>> >> > Please send me the correct config for BSNL(my net provider) >>>> >> > INDIA........ >>>> >> > >>>> >> > >>>> >> > >>>> >> > >>>> >> > >>>> >> > On 06/08/2009, Antonio Olivares <olivares14031@xxxxxxxxx> wrote: >>>> >> >> Sreehari, >>>> >> >> >>>> >> >> When trying to connect, would you mind doing the following before >>>> >> >> connecting: >>>> >> >> >>>> >> >> open up a terminal and run >>>> >> >> # tail -f /var/log/messages >>>> >> >> >>>> >> >> and kppp dies with an error message, let us know what it is(back >>>> >> >> to >>>> >> >> list) others may have the same problem and maybe a workaround is >>>> >> >> found. Hope this helps and also thank you for testing the driver >>>> >> >> :) >>>> >> >> Hopefully it is a WIN WIN situation. >>>> >> >> >>>> >> >> Regards, >>>> >> >> >>>> >> >> Antonio >>>> >> >> >>>> >> >> On 8/5/09, Sreehari. T. <sreeharigvr@xxxxxxxxx> wrote: >>>> >> >>> Dear Antonio Olivares, >>>> >> >>> >>>> >> >>> Thanks For sending me the right driver............ >>>> >> >>> Now my modem is detected and dialing . >>>> >> >>> But when "CONNECT" appears in log screen of KPPP dialer, >>>> >> >>> the system hangs.......... >>>> >> >>> Once it showed ppp error ........... >>>> >> >>> Please help me.......... >>>> >> >>> You are the only peson who has replied for my request.......... >>>> >> >>> >>>> >> >>>> Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks................ >>>> >> >>> >>>> >> >>> On 27/07/2009, Antonio Olivares <olivares14031@xxxxxxxxx> wrote: >>>> >> >>>> Sreehari, >>>> >> >>>> >>>> >> >>>> I have a confirmed report that slax can connect with the >>>> >> >>>> 11c1:0620 >>>> >> >>>> chipset. Here's the slax forum page: >>>> >> >>>> >>>> >> >>>> http://www.slax.org/forum.php?action=view&parentID=43687 >>>> >> >>>> >>>> >> >>>> and the module that should get the job done! >>>> >> >>>> >>>> >> >>>> http://www.slax.org/modules.php?action=detail&id=2593 >>>> >> >>>> >>>> >> >>>> Provided that there are no IRQ conflicts or sharing problems. >>>> >> >>>> I >>>> >> >>>> hope >>>> >> >>>> that it does work for you. In my case, I will be honest as I >>>> >> >>>> have >>>> >> >>>> not >>>> >> >>>> been able to get it to work, but I have one success report and >>>> >> >>>> I >>>> >> >>>> hope >>>> >> >>>> you add to the success statistic :) >>>> >> >>>> >>>> >> >>>> Regards, >>>> >> >>>> >>>> >> >>>> Antonio >>>> >> >>>> >>>> >> >>>> On 7/23/09, Sreehari. T. <sreeharigvr@xxxxxxxxx> wrote: >>>> >> >>>>> Modem data.txt attached with this mail.......... >>>> >> >>>>> Please help me to find the correct driver for my modem...... >>>> >> >>>>> Thanks in advance.. >>>> >> >>>>> >>>> >> >>>> >>>> >> >>> >>>> >> >> >>>> >> > >>>> >> >>>> > >>>> >>> I have dialed out with wvdial+wvstreams. Now the computer is not >>> hanging,but >>> can't connect to internet. The wvdial shown me the below >>> information...... >>> >>> >>> root@slax:~# wvdial >>> --> WvDial: Internet dialer version 1.60 >>> >>> --> Initializing modem. >>> --> Sending: ATZ >>> ATZ >>> OK >>> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>> ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>> OK >>> --> Modem initialized. >>> --> Sending: ATDT172222 >>> --> Waiting for carrier. >>> ATDT172222 >>> CONNECT 46666 V42bis >>> --> Carrier detected. Waiting for prompt. >>> --> Connected, but carrier signal lost! Retrying... >>> --> Sending: ATDT172222 >>> --> Waiting for carrier. >>> Welcome to UTStarcom Total Control HiPer ARC (TM) >>> Networks That Go The Distance (TM) >>> login: >>> login: >>> login: >>> NO CARRIER >>> --> No Carrier! Trying again. >>> --> Sending: ATDT172222 >>> --> Waiting for carrier. >>> ATDT172222 >>> CONNECT 45333 V42bis >>> --> Carrier detected. Waiting for prompt. >>> --> Connected, but carrier signal lost! Retrying... >>> --> Sending: ATDT172222 >>> --> Waiting for carrier. >>> Welcome to UTStarcom Total Control HiPer ARC (TM) >>> Networks That Go The Distance (TM) >>> login: >>> NO CARRIER >>> --> No Carrier! Trying again. >>> --> Sending: ATDT172222 >>> --> Waiting for carrier. >>> ATDT172222 >>> disconnect >>> NO CARRIER >>> --> No Carrier! Trying again. >>> >>> >>> Please reply soon................ >>> >> >> Sreehari, >> >> In your wvdial.conf file, do you have a line "Carrier Check = no" ?, >> if you don't please insert it and save your new wvdial.conf file and >> try to connect again. Report back to list(discuss@xxxxxxxxxxxxx) and >> cc to me if you like, but others can also help you too. >> >> Regards, >> >> Antonio >> >
