Sreehari, When trying to connect, would you mind doing the following before connecting: open up a terminal and run # tail -f /var/log/messages and kppp dies with an error message, let us know what it is(back to list) others may have the same problem and maybe a workaround is found. Hope this helps and also thank you for testing the driver :) Hopefully it is a WIN WIN situation. Regards, Antonio On 8/5/09, Sreehari. T. <sreeharigvr@xxxxxxxxx> wrote: > Dear Antonio Olivares, > > Thanks For sending me the right driver............ > Now my modem is detected and dialing . > But when "CONNECT" appears in log screen of KPPP dialer, > the system hangs.......... > Once it showed ppp error ........... > Please help me.......... > You are the only peson who has replied for my request.......... > Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks................ > > On 27/07/2009, Antonio Olivares <olivares14031@xxxxxxxxx> wrote: >> Sreehari, >> >> I have a confirmed report that slax can connect with the 11c1:0620 >> chipset. Here's the slax forum page: >> >> http://www.slax.org/forum.php?action=view&parentID=43687 >> >> and the module that should get the job done! >> >> http://www.slax.org/modules.php?action=detail&id=2593 >> >> Provided that there are no IRQ conflicts or sharing problems. I hope >> that it does work for you. In my case, I will be honest as I have not >> been able to get it to work, but I have one success report and I hope >> you add to the success statistic :) >> >> Regards, >> >> Antonio >> >> On 7/23/09, Sreehari. T. <sreeharigvr@xxxxxxxxx> wrote: >>> Modem data.txt attached with this mail.......... >>> Please help me to find the correct driver for my modem...... >>> Thanks in advance.. >>> >> >
