On 8/29/09, Sreehari. T. <sreeharigvr@xxxxxxxxx> wrote: > On 12/08/2009, Antonio Olivares <olivares14031@xxxxxxxxx> wrote: >> >> Sreehari, >> >> Do download wvstreams + wvdial: >> >> http://www.slax.org/modules.php?action=detail&id=624 >> >> http://www.slax.org/modules.php?action=detail&id=368 >> >> Regards, >> >> >> Antonio >> >> >> On 8/12/09, Sreehari. T. <sreeharigvr@xxxxxxxxx> wrote: >> > I am trying from slax 6.1.2 >> > Can you post the link of wvdial ................... >> > >> > 2009/8/12 Antonio Olivares <olivares14031@xxxxxxxxx> >> > >> >> Sreehari, >> >> >> >> Are you trying this from Slax 6.1.1 or from Slax 6.1.2? >> >> >> >> >> >> >> >> >> >> >> >> Aug 11 21:34:16 (none) /usr/sbin/gpm[5463]: *** info [startup.c(95)]: >> >> Aug 11 21:34:16 (none) /usr/sbin/gpm[5463]: Started gpm successfully. >> >> Entered daemon mode. >> >> Aug 11 21:34:17 (none) acpid: client connected from 5513[0:0] >> >> Aug 11 21:34:17 (none) acpid: 1 client rule loaded >> >> Aug 11 21:34:21 (none) init: Switching to runlevel: 4 >> >> Aug 11 21:34:21 (none) acpid: client connected from 5710[0:0] >> >> Aug 11 21:34:21 (none) acpid: 1 client rule loaded >> >> Aug 11 21:34:23 (none) kernel: [drm] Initialized drm 1.1.0 20060810 >> >> Aug 11 21:34:23 (none) kernel: pci 0000:00:02.0: PCI INT A -> GSI 16 >> >> (level, low) -> IRQ 16 >> >> Aug 11 21:34:23 (none) kernel: [drm] Initialized i915 1.6.0 20060119 >> >> on >> >> minor 0 >> >> Aug 11 21:43:04 (none) kernel: agrsm 0000:05:00.0: PCI INT A -> GSI 21 >> >> (level, low) -> IRQ 21 >> >> Aug 11 21:43:04 (none) kernel: agrsm: created 1 infos >> >> Aug 11 21:43:04 (none) kernel: ttyAGS3 at I/O 0x1000 (irq = 21) is a >> >> AgereModem >> >> Aug 11 21:43:04 (none) kernel: agrserial: Loading module Agere Modem >> >> Interface driver version 2.1.60.0.Linspire (2005-11-16) >> >> Aug 11 21:43:37 (none) kernel: PPP generic driver version 2.4.2 >> >> Aug 11 21:43:37 (none) pppd[7870]: pppd 2.4.4 started by root, uid 0 >> >> >> >> Hugo has reported success but by using wvdial and wvstreams modules >> >> respectively. Do please try with using wvdial since KPPP in this case >> >> might be causing some problems. If the problem still persists while >> >> using wvdial, then there are other things that we may try to do. >> >> >> >> Regards, >> >> >> >> Antonio >> >> >> >> >> >> On 8/11/09, Sreehari. T. <sreeharigvr@xxxxxxxxx> wrote: >> >> > Dear antonio , >> >> > I have followed your instructions and created the asked file. >> >> > File has been attached.......... >> >> > When the last entry to the above file was made system hanged and >> >> > mouse >> >> > stood stilll.......... >> >> > then i was forced to press the reset button....... >> >> > This occurs every time i connect to net..... >> >> > i guess that there is a mistake in my kppp configuration......... >> >> > Please send me the correct config for BSNL(my net provider) >> >> > INDIA........ >> >> > >> >> > >> >> > >> >> > >> >> > >> >> > On 06/08/2009, Antonio Olivares <olivares14031@xxxxxxxxx> wrote: >> >> >> Sreehari, >> >> >> >> >> >> When trying to connect, would you mind doing the following before >> >> >> connecting: >> >> >> >> >> >> open up a terminal and run >> >> >> # tail -f /var/log/messages >> >> >> >> >> >> and kppp dies with an error message, let us know what it is(back to >> >> >> list) others may have the same problem and maybe a workaround is >> >> >> found. Hope this helps and also thank you for testing the driver >> >> >> :) >> >> >> Hopefully it is a WIN WIN situation. >> >> >> >> >> >> Regards, >> >> >> >> >> >> Antonio >> >> >> >> >> >> On 8/5/09, Sreehari. T. <sreeharigvr@xxxxxxxxx> wrote: >> >> >>> Dear Antonio Olivares, >> >> >>> >> >> >>> Thanks For sending me the right driver............ >> >> >>> Now my modem is detected and dialing . >> >> >>> But when "CONNECT" appears in log screen of KPPP dialer, >> >> >>> the system hangs.......... >> >> >>> Once it showed ppp error ........... >> >> >>> Please help me.......... >> >> >>> You are the only peson who has replied for my request.......... >> >> >>> >> >> >> Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks................ >> >> >>> >> >> >>> On 27/07/2009, Antonio Olivares <olivares14031@xxxxxxxxx> wrote: >> >> >>>> Sreehari, >> >> >>>> >> >> >>>> I have a confirmed report that slax can connect with the >> >> >>>> 11c1:0620 >> >> >>>> chipset. Here's the slax forum page: >> >> >>>> >> >> >>>> http://www.slax.org/forum.php?action=view&parentID=43687 >> >> >>>> >> >> >>>> and the module that should get the job done! >> >> >>>> >> >> >>>> http://www.slax.org/modules.php?action=detail&id=2593 >> >> >>>> >> >> >>>> Provided that there are no IRQ conflicts or sharing problems. I >> >> >>>> hope >> >> >>>> that it does work for you. In my case, I will be honest as I >> >> >>>> have >> >> >>>> not >> >> >>>> been able to get it to work, but I have one success report and I >> >> >>>> hope >> >> >>>> you add to the success statistic :) >> >> >>>> >> >> >>>> Regards, >> >> >>>> >> >> >>>> Antonio >> >> >>>> >> >> >>>> On 7/23/09, Sreehari. T. <sreeharigvr@xxxxxxxxx> wrote: >> >> >>>>> Modem data.txt attached with this mail.......... >> >> >>>>> Please help me to find the correct driver for my modem...... >> >> >>>>> Thanks in advance.. >> >> >>>>> >> >> >>>> >> >> >>> >> >> >> >> >> > >> >> >> > >> > I have dialed out with wvdial+wvstreams. Now the computer is not > hanging,but > can't connect to internet. The wvdial shown me the below information...... > > > root@slax:~# wvdial > --> WvDial: Internet dialer version 1.60 > > --> Initializing modem. > --> Sending: ATZ > ATZ > OK > --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > OK > --> Modem initialized. > --> Sending: ATDT172222 > --> Waiting for carrier. > ATDT172222 > CONNECT 46666 V42bis > --> Carrier detected. Waiting for prompt. > --> Connected, but carrier signal lost! Retrying... > --> Sending: ATDT172222 > --> Waiting for carrier. > Welcome to UTStarcom Total Control HiPer ARC (TM) > Networks That Go The Distance (TM) > login: > login: > login: > NO CARRIER > --> No Carrier! Trying again. > --> Sending: ATDT172222 > --> Waiting for carrier. > ATDT172222 > CONNECT 45333 V42bis > --> Carrier detected. Waiting for prompt. > --> Connected, but carrier signal lost! Retrying... > --> Sending: ATDT172222 > --> Waiting for carrier. > Welcome to UTStarcom Total Control HiPer ARC (TM) > Networks That Go The Distance (TM) > login: > NO CARRIER > --> No Carrier! Trying again. > --> Sending: ATDT172222 > --> Waiting for carrier. > ATDT172222 > disconnect > NO CARRIER > --> No Carrier! Trying again. > > > Please reply soon................ > Sreehari, In your wvdial.conf file, do you have a line "Carrier Check = no" ?, if you don't please insert it and save your new wvdial.conf file and try to connect again. Report back to list(discuss@xxxxxxxxxxxxx) and cc to me if you like, but others can also help you too. Regards, Antonio
