Sreehari, As mentioned earlier, for your 11c1:0620 chipset modem, do NOT use Carrier Check = no Also use you regular login name. As Antonio mentioned earlier, we need details on the failure. Before starting a dial up, do: # tail -f /var/log/messages Then open a 2nd console to do the dialout from. After the failure, send the List the record from the /var/log/messages MarvS On Sun, Sep 27, 2009 at 2:30 AM, Sreehari. T. <sreeharigvr@xxxxxxxxx> wrote: > I have used login name as instructed by you......... > But it says wrong loginname....... > I added carrier check =no,(with usual login name) > then it is trying to connect again and again but not connecting..... > after some time (ie after several times trying to connect ) slax > hangs............ > Please help me........... > > > On 29/08/2009, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> wrote: >> With modem Agere Systems Unknown device 0620" >> CLASS=0780 >> PCIDEV=11c1:0620 >> >> Dialout should not require a >> Carrier Check = no >> >> It could be a protocol problem, occurring after the CONNECT has been >> achieved. >> >> Sreehari, >> >> Assuming that your IP (Iinternet provider) is UTStar.com >> Instead of your LoginName use: UTSstar.com/LoginName >> This is a syntax required by IPs which use the CHAP verification protocol. >> >> Report back. >> >> MarvS >> >> >> >> On Sat, Aug 29, 2009 at 9:32 AM, Antonio >> Olivares<olivares14031@xxxxxxxxx> wrote: >>> On 8/29/09, Sreehari. T. <sreeharigvr@xxxxxxxxx> wrote: >>>> On 12/08/2009, Antonio Olivares <olivares14031@xxxxxxxxx> wrote: >>>>> >>>>> Sreehari, >>>>> >>>>> Do download wvstreams + wvdial: >>>>> >>>>> http://www.slax.org/modules.php?action=detail&id=624 >>>>> >>>>> http://www.slax.org/modules.php?action=detail&id=368 >>>>> >>>>> Regards, >>>>> >>>>> >>>>> Antonio >>>>> >>>>> >>>>> On 8/12/09, Sreehari. T. <sreeharigvr@xxxxxxxxx> wrote: >>>>> > I am trying from slax 6.1.2 >>>>> > Can you post the link of wvdial ................... >>>>> > >>>>> > 2009/8/12 Antonio Olivares <olivares14031@xxxxxxxxx> >>>>> > >>>>> >> Sreehari, >>>>> >> >>>>> >> Are you trying this from Slax 6.1.1 or from Slax 6.1.2? >>>>> >> >>>>> >> >>>>> >> >>>>> >> >>>>> >> >>>>> >> Aug 11 21:34:16 (none) /usr/sbin/gpm[5463]: *** info >>>>> >> [startup.c(95)]: >>>>> >> Aug 11 21:34:16 (none) /usr/sbin/gpm[5463]: Started gpm >>>>> >> successfully. >>>>> >> Entered daemon mode. >>>>> >> Aug 11 21:34:17 (none) acpid: client connected from 5513[0:0] >>>>> >> Aug 11 21:34:17 (none) acpid: 1 client rule loaded >>>>> >> Aug 11 21:34:21 (none) init: Switching to runlevel: 4 >>>>> >> Aug 11 21:34:21 (none) acpid: client connected from 5710[0:0] >>>>> >> Aug 11 21:34:21 (none) acpid: 1 client rule loaded >>>>> >> Aug 11 21:34:23 (none) kernel: [drm] Initialized drm 1.1.0 20060810 >>>>> >> Aug 11 21:34:23 (none) kernel: pci 0000:00:02.0: PCI INT A -> GSI 16 >>>>> >> (level, low) -> IRQ 16 >>>>> >> Aug 11 21:34:23 (none) kernel: [drm] Initialized i915 1.6.0 20060119 >>>>> >> on >>>>> >> minor 0 >>>>> >> Aug 11 21:43:04 (none) kernel: agrsm 0000:05:00.0: PCI INT A -> GSI >>>>> >> 21 >>>>> >> (level, low) -> IRQ 21 >>>>> >> Aug 11 21:43:04 (none) kernel: agrsm: created 1 infos >>>>> >> Aug 11 21:43:04 (none) kernel: ttyAGS3 at I/O 0x1000 (irq = 21) is a >>>>> >> AgereModem >>>>> >> Aug 11 21:43:04 (none) kernel: agrserial: Loading module Agere Modem >>>>> >> Interface driver version 2.1.60.0.Linspire (2005-11-16) >>>>> >> Aug 11 21:43:37 (none) kernel: PPP generic driver version 2.4.2 >>>>> >> Aug 11 21:43:37 (none) pppd[7870]: pppd 2.4.4 started by root, uid 0 >>>>> >> >>>>> >> Hugo has reported success but by using wvdial and wvstreams modules >>>>> >> respectively. Do please try with using wvdial since KPPP in this >>>>> >> case >>>>> >> might be causing some problems. If the problem still persists while >>>>> >> using wvdial, then there are other things that we may try to do. >>>>> >> >>>>> >> Regards, >>>>> >> >>>>> >> Antonio >>>>> >> >>>>> >> >>>>> >> On 8/11/09, Sreehari. T. <sreeharigvr@xxxxxxxxx> wrote: >>>>> >> > Dear antonio , >>>>> >> > I have followed your instructions and created the asked file. >>>>> >> > File has been attached.......... >>>>> >> > When the last entry to the above file was made system hanged and >>>>> >> > mouse >>>>> >> > stood stilll.......... >>>>> >> > then i was forced to press the reset button....... >>>>> >> > This occurs every time i connect to net..... >>>>> >> > i guess that there is a mistake in my kppp configuration......... >>>>> >> > Please send me the correct config for BSNL(my net provider) >>>>> >> > INDIA........ >>>>> >> > >>>>> >> > >>>>> >> > >>>>> >> > >>>>> >> > >>>>> >> > On 06/08/2009, Antonio Olivares <olivares14031@xxxxxxxxx> wrote: >>>>> >> >> Sreehari, >>>>> >> >> >>>>> >> >> When trying to connect, would you mind doing the following before >>>>> >> >> connecting: >>>>> >> >> >>>>> >> >> open up a terminal and run >>>>> >> >> # tail -f /var/log/messages >>>>> >> >> >>>>> >> >> and kppp dies with an error message, let us know what it is(back >>>>> >> >> to >>>>> >> >> list) others may have the same problem and maybe a workaround is >>>>> >> >> found. Hope this helps and also thank you for testing the driver >>>>> >> >> :) >>>>> >> >> Hopefully it is a WIN WIN situation. >>>>> >> >> >>>>> >> >> Regards, >>>>> >> >> >>>>> >> >> Antonio >>>>> >> >> >>>>> >> >> On 8/5/09, Sreehari. T. <sreeharigvr@xxxxxxxxx> wrote: >>>>> >> >>> Dear Antonio Olivares, >>>>> >> >>> >>>>> >> >>> Thanks For sending me the right driver............ >>>>> >> >>> Now my modem is detected and dialing . >>>>> >> >>> But when "CONNECT" appears in log screen of KPPP dialer, >>>>> >> >>> the system hangs.......... >>>>> >> >>> Once it showed ppp error ........... >>>>> >> >>> Please help me.......... >>>>> >> >>> You are the only peson who has replied for my request.......... >>>>> >> >>> >>>>> >> >>>>> Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks................ >>>>> >> >>> >>>>> >> >>> On 27/07/2009, Antonio Olivares <olivares14031@xxxxxxxxx> wrote: >>>>> >> >>>> Sreehari, >>>>> >> >>>> >>>>> >> >>>> I have a confirmed report that slax can connect with the >>>>> >> >>>> 11c1:0620 >>>>> >> >>>> chipset. Here's the slax forum page: >>>>> >> >>>> >>>>> >> >>>> http://www.slax.org/forum.php?action=view&parentID=43687 >>>>> >> >>>> >>>>> >> >>>> and the module that should get the job done! >>>>> >> >>>> >>>>> >> >>>> http://www.slax.org/modules.php?action=detail&id=2593 >>>>> >> >>>> >>>>> >> >>>> Provided that there are no IRQ conflicts or sharing problems. >>>>> >> >>>> I >>>>> >> >>>> hope >>>>> >> >>>> that it does work for you. In my case, I will be honest as I >>>>> >> >>>> have >>>>> >> >>>> not >>>>> >> >>>> been able to get it to work, but I have one success report and >>>>> >> >>>> I >>>>> >> >>>> hope >>>>> >> >>>> you add to the success statistic :) >>>>> >> >>>> >>>>> >> >>>> Regards, >>>>> >> >>>> >>>>> >> >>>> Antonio >>>>> >> >>>> >>>>> >> >>>> On 7/23/09, Sreehari. T. <sreeharigvr@xxxxxxxxx> wrote: >>>>> >> >>>>> Modem data.txt attached with this mail.......... >>>>> >> >>>>> Please help me to find the correct driver for my modem...... >>>>> >> >>>>> Thanks in advance.. >>>>> >> >>>>> >>>>> >> >>>> >>>>> >> >>> >>>>> >> >> >>>>> >> > >>>>> >> >>>>> > >>>>> >>>> I have dialed out with wvdial+wvstreams. Now the computer is not >>>> hanging,but >>>> can't connect to internet. The wvdial shown me the below >>>> information...... >>>> >>>> >>>> root@slax:~# wvdial >>>> --> WvDial: Internet dialer version 1.60 >>>> >>>> --> Initializing modem. >>>> --> Sending: ATZ >>>> ATZ >>>> OK >>>> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>> ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>> OK >>>> --> Modem initialized. >>>> --> Sending: ATDT172222 >>>> --> Waiting for carrier. >>>> ATDT172222 >>>> CONNECT 46666 V42bis >>>> --> Carrier detected. Waiting for prompt. >>>> --> Connected, but carrier signal lost! Retrying... >>>> --> Sending: ATDT172222 >>>> --> Waiting for carrier. >>>> Welcome to UTStarcom Total Control HiPer ARC (TM) >>>> Networks That Go The Distance (TM) >>>> login: >>>> login: >>>> login: >>>> NO CARRIER >>>> --> No Carrier! Trying again. >>>> --> Sending: ATDT172222 >>>> --> Waiting for carrier. >>>> ATDT172222 >>>> CONNECT 45333 V42bis >>>> --> Carrier detected. Waiting for prompt. >>>> --> Connected, but carrier signal lost! Retrying... >>>> --> Sending: ATDT172222 >>>> --> Waiting for carrier. >>>> Welcome to UTStarcom Total Control HiPer ARC (TM) >>>> Networks That Go The Distance (TM) >>>> login: >>>> NO CARRIER >>>> --> No Carrier! Trying again. >>>> --> Sending: ATDT172222 >>>> --> Waiting for carrier. >>>> ATDT172222 >>>> disconnect >>>> NO CARRIER >>>> --> No Carrier! Trying again. >>>> >>>> >>>> Please reply soon................ >>>> >>> >>> Sreehari, >>> >>> In your wvdial.conf file, do you have a line "Carrier Check = no" ?, >>> if you don't please insert it and save your new wvdial.conf file and >>> try to connect again. Report back to list(discuss@xxxxxxxxxxxxx) and >>> cc to me if you like, but others can also help you too. >>> >>> Regards, >>> >>> Antonio >>> >> >
