MarvS, I think that driver not support my modem? when I use wvdialconf it cannot find my modem, And when I plugget in my telephone line, It use signal from telephone all the time.(but can't connect) when I try to connect by old driver, it has the same problem. Thanks for your help. :) Tour. > Bjorn > Re: Perhaps agrsm is worth a shot? > That is a good suggestion. Certainly will do no harm. > > Tour, > > FIrst install the Ubuntu package dkms. Then from > http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ get the > dkms-agrsm_2.1.80-6_i386.deb, agrsm-howto.txt and > agrsm-tools_0.0.1_all.deb . Install the .deb packages with > $ sudo dpkg -i dkms*.deb agrsm*.deb > which hopefully will culminate in the modem being detected. > For understanding See the example at > http://linmodems.technion.ac.il/bigarch/archive-eighth/msg03863.html > The dkms toolset automates compiling, including compiling of needed > update drivers > > MarvS > > On Tue, Apr 28, 2009 at 7:11 AM, Bjorn Wielens <Uniacke1@xxxxxxxx> wrote: >> Hi Marv, >> I don't have such a modem, but this may be useful for later: >> The agrsm packages with support for 11c11040 have the following >> supported devices: >> Note that the 11c11040 is not directly listed, but is identified through >> the audio card ID.  Pennnrhaps agrsm is worth a shot? >> >>  { 0x11C1, 0x0620, 0x0000, 0x0000 }, >>  { 0x1039, 0x7013, 0x0000, 0x0000 }, >>  { 0x1106, 0x3068, 0x0000, 0x0000 }, >>  { 0x8086, 0x2668, 0x0000, 0x0000 }, //ich6 hda >>  { 0x8086, 0x27D8, 0x0000, 0x0000 }, //ich7 hda >>  { 0x8086, 0x284B, 0x0000, 0x0000 }, //ich8 hda >>  { 0x8086, 0x269a, 0x0000, 0x0000 },  /* ESB2 */ >>  { 0x8086, 0x293e, 0x0000, 0x0000 }, /* ICH9 */ >>  { 0x8086, 0x293f, 0x0000, 0x0000 }, /* ICH9 */ >>  { 0x1002, 0x437b, 0x0000, 0x0000 },  /* ATI SB450 */ >>  { 0x1002, 0x4383, 0x0000, 0x0000 }, /* ATI SB600 */ >>  { 0x1002, 0x793b, 0x0000, 0x0000 }, /* ATI RS600 HDMI */ >>  { 0x1002, 0x7919, 0x0000, 0x0000 },  /* ATI RS690 HDMI */ >>  { 0x1002, 0x960c, 0x0000, 0x0000 }, /* ATI RS780 HDMI */ >>  { 0x1002, 0xaa00, 0x0000, 0x0000 }, /* ATI R600 HDMI */ >>  { 0x1106, 0x3288, 0x0000, 0x0000 },  /* VIA VT8251/VT8237A */ >>  { 0x1039, 0x7502, 0x0000, 0x0000 },  /* SIS966 */ >>  { 0x10b9, 0x5461, 0x0000, 0x0000 }, /* ULI M5461 */ >>  { 0x10de, 0x026c, 0x0000, 0x0000 },  /* NVIDIA MCP51 */ >>  { 0x10de, 0x0371, 0x0000, 0x0000 },  /* NVIDIA MCP55 */ >>  { 0x10de, 0x03e4, 0x0000, 0x0000 },  /* NVIDIA MCP61 */ >>  { 0x10de, 0x03f0, 0x0000, 0x0000 }, /* NVIDIA MCP61 */ >>  { 0x10de, 0x044a, 0x0000, 0x0000 }, /* NVIDIA MCP65 */ >>  { 0x10de, 0x044b, 0x0000, 0x0000 }, /* NVIDIA MCP65 */ >>  { 0x10de, 0x055c, 0x0000, 0x0000 },  /* NVIDIA MCP67 */ >>  { 0x10de, 0x055d, 0x0000, 0x0000 },  /* NVIDIA MCP67 */ >>  { 0x8086, 0x2416, 0x0000, 0x0000 }, >>  { 0x8086, 0x2426, 0x0000, 0x0000 }, >>  { 0x8086, 0x2446, 0x0000, 0x0000 }, >>  { 0x8086, 0x7196, 0x0000, 0x0000 }, >>  { 0x8086, 0x2486, 0x0000, 0x0000 }, >>  { 0x8086, 0x24C6, 0x0000, 0x0000 }, >>  { 0x8086, 0x24D6, 0x0000, 0x0000 }, >>  { 0x11C1, 0x048C, 0x0000, 0x0000 }, >>  { 0x11C1, 0x048F, 0x0000, 0x0000 }, >>  { 0x8086, 0x266D, 0x0000, 0x0000 }, >> >> Bjorn. >> >> >> Marvin Stodolsky wrote: >>> List, >>> >>> Would any of you with the Agere 0x11c13026 modem chip, hosted on a >>> High Definition Audio (HDA)card please report in.  What are the >>> specifics of HDA card, kernel and do you have modem functionality. >>> >>> Marv S >>> >>> >>> 2009/4/27 Patompong Kumdang <u500910052@xxxxxx>: >>>> Antonio, MarvS >>>> >>>> Can I try another way to connect to internet. >>>> >>>> Tour. >>>> >>>> >>>> >>>>> The MS drivers provide no additional useful information, beyond that >>>>> of the ModemData.txt >>>>> More this evening. >>>>> >>>>> MarvS >>>>> >>>>> 2009/4/27 Patompong Kumdang <u500910052@xxxxxx>: >>>>>> Antonio, MarvS >>>>>> >>>>>> Sorry, ftp://u500910052@xxxxxxxxxxx/public_html/Modem.zip is broken. >>>>>> >>>>>> Please use this link to download again. >>>>>> http://mail.cm.edu/~u500910052/Modem.zip >>>>>> >>>>>> Thanks, >>>>>> Tour. >>>>>> >>>>>> >>>>>> >>>>>> >>>>>>> Antonio, MarvS >>>>>>> >>>>>>> Can this windows driver tell you more information about my modem. >>>>>>> please download these file at: >>>>>>> ftp://u500910052@xxxxxxxxxxx/public_html/Modem.zip >>>>>>> (sorry, my mail can not sent .zip file) >>>>>>> >>>>>>> Thanks, >>>>>>> Tour. >>>>>>> >>>>>>> >>>>>>> >>>>>>>> Antonio >>>>>>>> >>>>>>>> "The ALSA verion is 1.0.19" output from the scanModem script is >>>>>>>> from a >>>>>>>> call: >>>>>>>> ย  ย aplay --version >>>>>>>> and this is typically matched with other ALSA components of an >>>>>>>> installation. >>>>>>>> >>>>>>>> On the Ubuntu Jaunty I just upgraded to: >>>>>>>> ย  ย  ย aplay --version >>>>>>>> aplay: version 1.0.18 by Jaroslav Kysela <perex@xxxxxxxx> >>>>>>>> So if is indeed puzzling as to why TouRs is 1.0.19 >>>>>>>> >>>>>>>> TourR, >>>>>>>> ย  ย Have you done any cogent alternations to your System. >>>>>>>> >>>>>>>> MarvS >>>>>>>> >>>>>>>> >>>>>>>> On Sun, Apr 26, 2009 at 10:05 PM, Antonio Olivares >>>>>>>> <olivares14031@xxxxxxxxx> wrote: >>>>>>>>> Tour and Marv, >>>>>>>>> >>>>>>>>> I am trying to follow this carefully seeing where I can help, I >>>>>>>>> see a >>>>>>>>> problem here and I do not know why this is happening? >>>>>>>>> >>>>>>>>> /usr/src/modules/alsa/alsa-driver-1.0.16/pci/hda/hda_intel.c:634: >>>>>>>>> เ��ย hda_intel: azx_get_response timeout, switching to >>>>>>>>> polling mode: >>>>>>>>> last >>>>>>>>> เ��ย cmd=0x10490000 >>>>>>>>> >>>>>>>>> With the old ModemData.txt and the new one just sent, the alsa >>>>>>>>> version >>>>>>>>> is 1.0.19. เ��ย This does not make sense. >>>>>>>>> >>>>>>>>> ===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== >>>>>>>>> The ALSA packages provide audio support and also drivers for some >>>>>>>>> modems. >>>>>>>>> ALSA diagnostics are written during bootup to /proc/asound/ >>>>>>>>> folders. >>>>>>>>> >>>>>>>>> The ALSA verion is 1.0.19 >>>>>>>>> The modem cards detected by "aplay -l" เ��ย are: >>>>>>>>> card 0: Intel [HDA Intel], device 6: Si3054 Modem [Si3054 Modem] >>>>>>>>> >>>>>>>>> The /proc/asound/pcm file reports: >>>>>>>>> ----------------------- >>>>>>>>> 00-00: ALC883 Analog : ALC883 Analog : playback 1 : capture 1 >>>>>>>>> 00-01: ALC883 Digital : ALC883 Digital : playback 1 >>>>>>>>> 00-02: ALC883 Analog : ALC883 Analog : capture 1 >>>>>>>>> 00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1 >>>>>>>>> >>>>>>>>> about /proc/asound/cards: >>>>>>>>> ------------------------ >>>>>>>>> เ��ย 0 [Intel เ��ย  เ��ย  เ��ย >>>>>>>>>  เ��ย  เ��ย ]: HDA-Intel - HDA Intel >>>>>>>>> เ��ย  เ��ย  เ��ย  เ��ย >>>>>>>>>  เ��ย  เ��ย  เ��ย  เ��ย >>>>>>>>>  เ��ย  เ��ย  เ��ย HDA >>>>>>>>> Intel at 0xd0340000 irq 22 >>>>>>>>> >>>>>>>>> เ��ย PCI slot 00:1b.0 has a High Definition Audio Card >>>>>>>>> เ��ย The drivers are in the kernel modules tree at: >>>>>>>>> เ��ย >>>>>>>>> /lib/modules/2.6.27-10-generic/kernel/sound/pci/hda/snd-hda-intel.ko >>>>>>>>> /lib/modules/2.6.27-11-generic/kernel/sound/pci/hda/snd-hda-intel.ko >>>>>>>>> /lib/modules/2.6.27-11-server/kernel/sound/pci/hda/snd-hda-intel.ko >>>>>>>>> เ��ย The modem codec file for the HDA card is: >>>>>>>>> /proc/asound/card0/codec#1 >>>>>>>>> >>>>>>>>> >>>>>>>>> I am thinking also since the alsa-version is 1.0.19, shouldn't >>>>>>>>> the >>>>>>>>> precompiled SLMODEMD.gcc4.3.tar.gz serve, a new one with >>>>>>>>> -alsa-1.0.19.tar.gz probably needs to be created? >>>>>>>>> >>>>>>>>> My $0.02 >>>>>>>>> >>>>>>>>> Regards, >>>>>>>>> >>>>>>>>> Antonio >>>>>>>>> >>>>>>>>> On 4/27/09, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> wrote: >>>>>>>>>> Tour >>>>>>>>>> >>>>>>>>>> For the Intel537 do: >>>>>>>>>> >>>>>>>>>> $ find /lib/modules --name Intel537*.ko >>>>>>>>>> and delete any modules found. >>>>>>>>>> >>>>>>>>>> There may also be residual Intel537 files like: >>>>>>>>>> เ��ย  เ��ย  เ��ย >>>>>>>>>>  /etc/init.d/537_boot >>>>>>>>>> เ��ย  เ��ย  เ��ย >>>>>>>>>>  /etc/hamregistry.bin >>>>>>>>>> เ��ย  เ��ย  เ��ย  /usr/sbin/usrsound >>>>>>>>>> เ��ย  เ��ย  เ��ย >>>>>>>>>>  /usr/sbin/hamregistry >>>>>>>>>> that should be removed. >>>>>>>>>> >>>>>>>>>> MarvS >>>>>>>>>> >>>>>>>>>> 2009/4/26 Patompong Kumdang <u500910052@xxxxxx>: >>>>>>>>>>> hello, >>>>>>>>>>> This time I will tell you more information about my computer. >>>>>>>>>>> >>>>>>>>>>>>>> Here above shows that you apparently used a USB modem with >>>>>>>>>>>>>>>>> device >>>>>>>>>>> /dev/ttyACM0 >>>>>>>>>>>>>> that has nothing to do with the device that you apparently >>>>>>>>>>>>>> need >>>>>>>>>>>>>> to >>>>>>>>>>>>>> use >>>>>>>>>>>>>> /dev/ttySL0 >>>>>>>>>>> I use mobile phone to connect to internet last week. (It can >>>>>>>>>>> connect) >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>>>>> Here wlan0 is another interface that is not needed when you >>>>>>>>>>>>>> are >>>>>>>>>>>>>> trying >>>>>>>>>>>>>> to connect with dialup. >>>>>>>>>>>>>> It needs to be shut off to troubleshoot the dialup >>>>>>>>>>>>>> connection. >>>>>>>>>>> I have wireless modem and lan card too, but I not use at this >>>>>>>>>>> time. >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>>>>> What is this ? >>>>>>>>>>>>>> Apr 20 14:45:38 tourcom-laptop kernel: [ เ��ย >>>>>>>>>>>>>>  51.034653] >>>>>>>>>>>>>> Intel537: >>>>>>>>>>>>>> disagrees about version of symbol struct_module >>>>>>>>>>>>>> Apr 20 14:45:38 tourcom-laptop kernel: [ เ��ย >>>>>>>>>>>>>>  51.081436] >>>>>>>>>>>>>> Intel537: >>>>>>>>>>>>>> disagrees about version of symbol struct_module >>>>>>>>>>> I don't know about this driver. >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>>>>> there seems to be an Intel537 driver on your system from >>>>>>>>>>>>>> some >>>>>>>>>>>>>> previous >>>>>>>>>>> attempt, >>>>>>>>>>>>>> which may be interfering. >>>>>>>>>>>>>> Please uninstall/delete this driver from your System. >>>>>>>>>>> I don't know how to remove this driver. >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>>>>> When attempting to >>>>>>>>>>>>>> connect, open a terminal and type >>>>>>>>>>>>>> $ sudo tail -f /var/log/messages >>>>>>>>>>> I have got this message >>>>>>>>>>> >>>>>>>>>>> root@tourcom-laptop:/home/tourcom# sudo tail -f >>>>>>>>>>> /var/log/messages >>>>>>>>>>> >>>>>>>>>>> Apr 27 07:19:32 tourcom-laptop kernel: [ เ��ย >>>>>>>>>>>  53.691210] [drm] >>>>>>>>>>> Initialized >>>>>>>>>>> drm 1.1.0 20060810 >>>>>>>>>>> Apr 27 07:19:32 tourcom-laptop kernel: [ เ��ย >>>>>>>>>>>  53.698167] pci >>>>>>>>>>> 0000:00:02.0: >>>>>>>>>>> PCI INT A -> GSI 16 (level, low) -> IRQ 16 >>>>>>>>>>> Apr 27 07:19:32 tourcom-laptop kernel: [ เ��ย >>>>>>>>>>>  53.699489] [drm] >>>>>>>>>>> Initialized >>>>>>>>>>> i915 1.6.0 20060119 on minor 0 >>>>>>>>>>> Apr 27 07:19:33 tourcom-laptop kernel: [ เ��ย >>>>>>>>>>>  54.444472] sky2 >>>>>>>>>>> eth0: >>>>>>>>>>> enabling >>>>>>>>>>> interface >>>>>>>>>>> Apr 27 07:19:33 tourcom-laptop kernel: [ เ��ย >>>>>>>>>>>  54.447579] >>>>>>>>>>> ADDRCONF(NETDEV_UP): >>>>>>>>>>> eth0: link is not ready >>>>>>>>>>> Apr 27 07:19:37 tourcom-laptop pulseaudio[6044]: >>>>>>>>>>> ltdl-bind-now.c: >>>>>>>>>>> Failed >>>>>>>>>>> to find original dlopen loader. >>>>>>>>>>> Apr 27 07:19:37 tourcom-laptop pulseaudio[6047]: main.c: >>>>>>>>>>> setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not >>>>>>>>>>> permitted >>>>>>>>>>> Apr 27 07:19:37 tourcom-laptop pulseaudio[6047]: main.c: >>>>>>>>>>> setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not >>>>>>>>>>> permitted >>>>>>>>>>> Apr 27 07:27:37 tourcom-laptop kernel: [ เ��ย >>>>>>>>>>> 538.346544] sky2 >>>>>>>>>>> eth0: >>>>>>>>>>> disabling >>>>>>>>>>> interface >>>>>>>>>>> Apr 27 07:31:26 tourcom-laptop kernel: [ เ��ย >>>>>>>>>>> 766.852013] ALSA >>>>>>>>>>> /usr/src/modules/alsa/alsa-driver-1.0.16/pci/hda/hda_intel.c:634: >>>>>>>>>>> hda_intel: azx_get_response timeout, switching to polling mode: >>>>>>>>>>> last >>>>>>>>>>> cmd=0x10490000 >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> I sent my new scanmodem data to you. >>>>>>>>>>> please help me to follow the step that you advice with a >>>>>>>>>>> command >>>>>>>>>>> code. >>>>>>>>>>> >>>>>>>>>>> Thank you, >>>>>>>>>>> >>>>>>>>>>> Tour. >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>>> Tour, >>>>>>>>>>>> >>>>>>>>>>>> I looked back at your ModemData.txt sent a few days ago, it >>>>>>>>>>>> does >>>>>>>>>>>> not >>>>>>>>>>>> agree with output from scanModem :(, >>>>>>>>>>>> >>>>>>>>>>>> http://www.nabble.com/Please-help-me-to-set-up-my-modem-to23204381.html >>>>>>>>>>>> >>>>>>>>>>>> In the scanModem that you sent the alsa version is 1.0.19, and >>>>>>>>>>>> with >>>>>>>>>>>> the output messages that you sent it is 1.0.16 : >>>>>>>>>>>> >>>>>>>>>>>> Apr 24 16:19:38 tourcom-laptop kernel: [ เ��ย >>>>>>>>>>>> 731.524013] ALSA >>>>>>>>>>>> /usr/src/modules/alsa/alsa-driver-1.0.16/pci/hda/hda_intel.c:634: >>>>>>>>>>>> hda_intel: azx_get_response timeout, switching to polling >>>>>>>>>>>> mode: >>>>>>>>>>>> last >>>>>>>>>>>> cmd=0x10490000 >>>>>>>>>>>> >>>>>>>>>>>> would you mind sending ModemData.txt again, re run scanModem >>>>>>>>>>>> and >>>>>>>>>>>> send >>>>>>>>>>>> it back to list. เ��ย It is hard to troubleshoot with >>>>>>>>>>>> too many >>>>>>>>>>>> things >>>>>>>>>>>> going on. >>>>>>>>>>>> >>>>>>>>>>>> Regards, >>>>>>>>>>>> >>>>>>>>>>>> Antonio >>>>>>>>>>>> >>>>>>>>>>>> On 4/26/09, Antonio Olivares <olivares14031@xxxxxxxxx> wrote: >>>>>>>>>>>>> Tour, >>>>>>>>>>>>> >>>>>>>>>>>>> I see too many interfaces interfering with your >>>>>>>>>>>>> connection(s). >>>>>>>>>>>>> >>>>>>>>>>>>> Apr 25 17:31:34 tourcom-laptop kernel: [ เ��ย >>>>>>>>>>>>> 231.792507] PPP >>>>>>>>>>>>> generic >>>>>>>>>>>>> driver version 2.4.2 >>>>>>>>>>>>> Apr 25 17:31:34 tourcom-laptop pppd[6494]: pppd 2.4.4 started >>>>>>>>>>>>> by >>>>>>>>>>>>> root, >>>>>>>>>>>>> uid >>>>>>>>>>>>> 0 >>>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (BUSY) >>>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (NO >>>>>>>>>>>>> CARRIER) >>>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (VOICE) >>>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (NO >>>>>>>>>>>>> DIALTONE) >>>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (NO DIAL >>>>>>>>>>>>> TONE) >>>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (NO >>>>>>>>>>>>> ANSWER) >>>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (DELAYED) >>>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: send (ATZ^M) >>>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: expect (OK) >>>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: ATZ^M^M >>>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: OK >>>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: เ��ย -- >>>>>>>>>>>>> got it >>>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: send (ATDT#99^M) >>>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: expect (CONNECT) >>>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: ^M >>>>>>>>>>>>> Apr 25 17:31:38 tourcom-laptop chat[6499]: ATDT#99^M^M >>>>>>>>>>>>> Apr 25 17:31:38 tourcom-laptop chat[6499]: NO CARRIER >>>>>>>>>>>>> Apr 25 17:31:38 tourcom-laptop chat[6499]: เ��ย -- >>>>>>>>>>>>> failed >>>>>>>>>>>>> Apr 25 17:31:38 tourcom-laptop chat[6499]: Failed (NO >>>>>>>>>>>>> CARRIER) >>>>>>>>>>>>> Apr 25 17:31:39 tourcom-laptop pppd[6494]: Exit. >>>>>>>>>>>>> Apr 25 17:35:17 tourcom-laptop pppd[6536]: pppd 2.4.4 started >>>>>>>>>>>>> by >>>>>>>>>>>>> root, >>>>>>>>>>>>> uid >>>>>>>>>>>>> 0 >>>>>>>>>>>>> Apr 25 17:35:17 tourcom-laptop pppd[6536]: Using interface >>>>>>>>>>>>> ppp0 >>>>>>>>>>>>> Apr 25 17:35:17 tourcom-laptop pppd[6536]: Connect: ppp0 <--> >>>>>>>>>>>>> /dev/ttyACM0 >>>>>>>>>>>>> Apr 25 17:35:36 tourcom-laptop pppd[6536]: Serial line is >>>>>>>>>>>>> looped >>>>>>>>>>>>> back. >>>>>>>>>>>>> Apr 25 17:35:36 tourcom-laptop pppd[6536]: Connection >>>>>>>>>>>>> terminated. >>>>>>>>>>>>> Apr 25 17:35:36 tourcom-laptop pppd[6536]: Exit. >>>>>>>>>>>>> Apr 25 17:37:38 tourcom-laptop pppd[6563]: pppd 2.4.4 started >>>>>>>>>>>>> by >>>>>>>>>>>>> root, >>>>>>>>>>>>> uid >>>>>>>>>>>>> 0 >>>>>>>>>>>>> Apr 25 17:37:38 tourcom-laptop pppd[6563]: Using interface >>>>>>>>>>>>> ppp0 >>>>>>>>>>>>> Apr 25 17:37:38 tourcom-laptop pppd[6563]: Connect: ppp0 <--> >>>>>>>>>>>>> /dev/ttyACM0 >>>>>>>>>>>>> Apr 25 17:37:56 tourcom-laptop pppd[6563]: Serial line is >>>>>>>>>>>>> looped >>>>>>>>>>>>> back. >>>>>>>>>>>>> Apr 25 17:37:56 tourcom-laptop pppd[6563]: Connection >>>>>>>>>>>>> terminated. >>>>>>>>>>>>> Apr 25 17:37:56 tourcom-laptop pppd[6563]: Exit. >>>>>>>>>>>>> Apr 25 17:39:19 tourcom-laptop pppd[6583]: pppd 2.4.4 started >>>>>>>>>>>>> by >>>>>>>>>>>>> root, >>>>>>>>>>>>> uid >>>>>>>>>>>>> 0 >>>>>>>>>>>>> Apr 25 17:39:19 tourcom-laptop pppd[6583]: Using interface >>>>>>>>>>>>> ppp0 >>>>>>>>>>>>> Apr 25 17:39:19 tourcom-laptop pppd[6583]: Connect: ppp0 <--> >>>>>>>>>>>>> /dev/ttyACM0 >>>>>>>>>>>>> Apr 25 17:39:24 tourcom-laptop pppd[6583]: PAP authentication >>>>>>>>>>>>> succeeded >>>>>>>>>>>>> Apr 25 17:39:24 tourcom-laptop kernel: [ เ��ย >>>>>>>>>>>>> 701.755111] PPP BSD >>>>>>>>>>>>> Compression module registered >>>>>>>>>>>>> Apr 25 17:39:24 tourcom-laptop kernel: [ เ��ย >>>>>>>>>>>>> 701.833370] PPP >>>>>>>>>>>>> Deflate >>>>>>>>>>>>> Compression module registered >>>>>>>>>>>>> Apr 25 17:39:39 tourcom-laptop pppd[6583]: local เ��ย >>>>>>>>>>>>> IP address >>>>>>>>>>>>> 10.174.152.18 >>>>>>>>>>>>> Apr 25 17:39:39 tourcom-laptop pppd[6583]: remote IP address >>>>>>>>>>>>> 10.1.1.1 >>>>>>>>>>>>> Apr 25 17:39:39 tourcom-laptop pppd[6583]: primary >>>>>>>>>>>>> เ��ย  DNS >>>>>>>>>>>>> address >>>>>>>>>>>>> 203.146.237.237 >>>>>>>>>>>>> Apr 25 17:39:39 tourcom-laptop pppd[6583]: secondary DNS >>>>>>>>>>>>> address >>>>>>>>>>>>> 202.149.24.5 >>>>>>>>>>>>> Apr 25 17:42:07 tourcom-laptop pppd[6583]: Terminating on >>>>>>>>>>>>> signal >>>>>>>>>>>>> 15 >>>>>>>>>>>>> Apr 25 17:42:07 tourcom-laptop pppd[6583]: Connect time 2.5 >>>>>>>>>>>>> minutes. >>>>>>>>>>>>> Apr 25 17:42:07 tourcom-laptop pppd[6583]: Sent 68036 bytes, >>>>>>>>>>>>> received >>>>>>>>>>>>> 263473 bytes. >>>>>>>>>>>>> Apr 25 17:42:07 tourcom-laptop pppd[6583]: Connection >>>>>>>>>>>>> terminated. >>>>>>>>>>>>> Apr 25 17:42:07 tourcom-laptop pppd[6583]: Exit. >>>>>>>>>>>>> Apr 25 17:42:15 tourcom-laptop kernel: [ เ��ย >>>>>>>>>>>>> 873.128154] usb >>>>>>>>>>>>> 2-2: USB >>>>>>>>>>>>> disconnect, address 2 >>>>>>>>>>>>> >>>>>>>>>>>>> Here above shows that you apparently used a USB modem with >>>>>>>>>>>>> device >>>>>>>>>>>>> /dev/ttyACM0 >>>>>>>>>>>>> that has nothing to do with the device that you apparently >>>>>>>>>>>>> need >>>>>>>>>>>>> to >>>>>>>>>>>>> use >>>>>>>>>>>>> /dev/ttySL0 >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> Apr 24 22:05:24 tourcom-laptop pppd[6415]: pppd 2.4.4 started >>>>>>>>>>>>> by >>>>>>>>>>>>> root, >>>>>>>>>>>>> uid >>>>>>>>>>>>> 0 >>>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (BUSY) >>>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (NO >>>>>>>>>>>>> CARRIER) >>>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (VOICE) >>>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (NO >>>>>>>>>>>>> DIALTONE) >>>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (NO DIAL >>>>>>>>>>>>> TONE) >>>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (NO >>>>>>>>>>>>> ANSWER) >>>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (DELAYED) >>>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: send (ATZ^M) >>>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: expect (OK) >>>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: ^M^M^MATZ^M^M >>>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: OK >>>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: เ��ย -- >>>>>>>>>>>>> got it >>>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: send (ATDT1222^M) >>>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: expect (CONNECT) >>>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: ^M >>>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: ATDT1222^M^M >>>>>>>>>>>>> Apr 24 22:06:03 tourcom-laptop chat[6420]: NO CARRIER >>>>>>>>>>>>> Apr 24 22:06:03 tourcom-laptop chat[6420]: เ��ย -- >>>>>>>>>>>>> failed >>>>>>>>>>>>> Apr 24 22:06:03 tourcom-laptop chat[6420]: Failed (NO >>>>>>>>>>>>> CARRIER) >>>>>>>>>>>>> Apr 24 22:06:04 tourcom-laptop pppd[6415]: Exit. >>>>>>>>>>>>> Apr 24 22:07:13 tourcom-laptop kernel: [ เ��ย >>>>>>>>>>>>> 380.500015] ALSA >>>>>>>>>>>>> /usr/src/modules/alsa/alsa-driver-1.0.16/pci/hda/hda_intel.c:634: >>>>>>>>>>>>> hda_intel: azx_get_response timeout, switching to polling >>>>>>>>>>>>> mode: >>>>>>>>>>>>> last >>>>>>>>>>>>> cmd=0x10490000 >>>>>>>>>>>>> Apr 24 22:07:51 tourcom-laptop pppd[6443]: pppd 2.4.4 started >>>>>>>>>>>>> by >>>>>>>>>>>>> root, >>>>>>>>>>>>> uid >>>>>>>>>>>>> 0 >>>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (BUSY) >>>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (NO >>>>>>>>>>>>> CARRIER) >>>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (VOICE) >>>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (NO >>>>>>>>>>>>> DIALTONE) >>>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (NO DIAL >>>>>>>>>>>>> TONE) >>>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (NO >>>>>>>>>>>>> ANSWER) >>>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (DELAYED) >>>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: send (ATZ^M) >>>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: expect (OK) >>>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: ^M^M^MATZ^M^M >>>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: OK >>>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: เ��ย -- >>>>>>>>>>>>> got it >>>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: send (ATDT1222^M) >>>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: expect (CONNECT) >>>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: ^M >>>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: ATDT1222^M^M >>>>>>>>>>>>> Apr 24 22:08:30 tourcom-laptop chat[6445]: NO CARRIER >>>>>>>>>>>>> Apr 24 22:08:30 tourcom-laptop chat[6445]: เ��ย -- >>>>>>>>>>>>> failed >>>>>>>>>>>>> Apr 24 22:08:30 tourcom-laptop chat[6445]: Failed (NO >>>>>>>>>>>>> CARRIER) >>>>>>>>>>>>> Apr 24 22:08:31 tourcom-laptop pppd[6443]: Exit. >>>>>>>>>>>>> >>>>>>>>>>>>> Here wlan0 is another interface that is not needed when you >>>>>>>>>>>>> are >>>>>>>>>>>>> trying >>>>>>>>>>>>> to connect with dialup. >>>>>>>>>>>>> It needs to be shut off to troubleshoot the dialup >>>>>>>>>>>>> connection. >>>>>>>>>>>>> >>>>>>>>>>>>> $ sudo ifconfig wlan0 down >>>>>>>>>>>>> and all others too like eth0, eth1 etc. >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> Apr 20 14:45:17 tourcom-laptop kernel: [ เ��ย >>>>>>>>>>>>>  22.526400] wlan0: >>>>>>>>>>>>> ethernet >>>>>>>>>>>>> device 00:16:cf:73:b1:97 using serialized NDIS driver: >>>>>>>>>>>>> net5211, >>>>>>>>>>>>> version: 0x40002, NDIS version: 0x501, vendor: 'NDIS Network >>>>>>>>>>>>> Adapter', >>>>>>>>>>>>> 168C:001A.5.conf >>>>>>>>>>>>> Apr 20 14:45:17 tourcom-laptop kernel: [ เ��ย >>>>>>>>>>>>>  22.543385] >>>>>>>>>>>>> acer-wmi: >>>>>>>>>>>>> Acer >>>>>>>>>>>>> Laptop ACPI-WMI Extras >>>>>>>>>>>>> Apr 20 14:45:17 tourcom-laptop kernel: [ เ��ย >>>>>>>>>>>>>  22.568075] wlan0: >>>>>>>>>>>>> encryption modes supported: WEP; TKIP with WPA, WPA2, >>>>>>>>>>>>> WPA2PSK; >>>>>>>>>>>>> AES/CCMP with WPA, WPA2, WPA2PSK >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> What is this ? >>>>>>>>>>>>> >>>>>>>>>>>>> Apr 20 14:45:38 tourcom-laptop kernel: [ เ��ย >>>>>>>>>>>>>  51.034653] >>>>>>>>>>>>> Intel537: >>>>>>>>>>>>> disagrees about version of symbol struct_module >>>>>>>>>>>>> Apr 20 14:45:38 tourcom-laptop kernel: [ เ��ย >>>>>>>>>>>>>  51.081436] >>>>>>>>>>>>> Intel537: >>>>>>>>>>>>> disagrees about version of symbol struct_module >>>>>>>>>>>>> >>>>>>>>>>>>> Intel537 modem?? เ��ย too, เ��ย Did not see >>>>>>>>>>>>> that one when you >>>>>>>>>>>>> sent >>>>>>>>>>>>> ModemData.txt first. >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> Apr 20 14:45:40 tourcom-laptop kernel: [ เ��ย >>>>>>>>>>>>>  53.644280] sky2 >>>>>>>>>>>>> eth0: >>>>>>>>>>>>> enabling interface >>>>>>>>>>>>> Apr 20 14:45:40 tourcom-laptop kernel: [ เ��ย >>>>>>>>>>>>>  53.647244] >>>>>>>>>>>>> ADDRCONF(NETDEV_UP): eth0: link is not ready >>>>>>>>>>>>> Apr 20 14:45:42 tourcom-laptop kernel: [ เ��ย >>>>>>>>>>>>>  55.293253] sky2 >>>>>>>>>>>>> eth0: >>>>>>>>>>>>> Link >>>>>>>>>>>>> is up at 100 Mbps, full duplex, flow control both >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> Apr 20 18:23:18 tourcom-laptop kernel: [ 1837.606047] sky2 >>>>>>>>>>>>> eth0: >>>>>>>>>>>>> Link is >>>>>>>>>>>>> down. >>>>>>>>>>>>> Apr 20 18:23:20 tourcom-laptop kernel: [ 1839.206504] sky2 >>>>>>>>>>>>> eth0: >>>>>>>>>>>>> Link >>>>>>>>>>>>> is up at 100 Mbps, full duplex, flow control both >>>>>>>>>>>>> Apr 20 18:23:26 tourcom-laptop kernel: [ 1845.688796] sky2 >>>>>>>>>>>>> eth0: >>>>>>>>>>>>> Link is >>>>>>>>>>>>> down. >>>>>>>>>>>>> Apr 20 18:23:52 tourcom-laptop kernel: [ 1871.418303] sky2 >>>>>>>>>>>>> eth0: >>>>>>>>>>>>> Link >>>>>>>>>>>>> is up at 100 Mbps, full duplex, flow control both >>>>>>>>>>>>> Apr 20 18:34:19 tourcom-laptop kernel: [ 2498.381516] device >>>>>>>>>>>>> eth0 >>>>>>>>>>>>> left >>>>>>>>>>>>> promiscuous mode >>>>>>>>>>>>> >>>>>>>>>>>>> Try one thing at a time. เ��ย You are trying to do >>>>>>>>>>>>> too much. >>>>>>>>>>>>> เ��ย If you >>>>>>>>>>>>> want >>>>>>>>>>>>> to connect with slmodemd use that and that only. เ��ย >>>>>>>>>>>>> When >>>>>>>>>>>>> attempting >>>>>>>>>>>>> to >>>>>>>>>>>>> connect, open a terminal and type >>>>>>>>>>>>> $ sudo tail -f /var/log/messages >>>>>>>>>>>>> >>>>>>>>>>>>> send only the parts when the connection is taking place and >>>>>>>>>>>>> when >>>>>>>>>>>>> it >>>>>>>>>>>>> fails. >>>>>>>>>>>>> >>>>>>>>>>>>> Regards, >>>>>>>>>>>>> >>>>>>>>>>>>> Antonio >>>>>>>>>>>>> >>>>>>>>>>>>> On 4/26/09, Patompong Kumdang <u500910052@xxxxxx> wrote: >>>>>>>>>>>>>> Hello, >>>>>>>>>>>>>> I heve sent this log file to you. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Thank you. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Tour. >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>>> Tour, >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Could you try to make a log file of your session >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> $ sudo wvdial 2>&1 | tee wvdial.out >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> send wvdial.out to us(list) >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> เ��ย and attach output of >>>>>>>>>>>>>>> $ sudo tail -f var/log/messages >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Report back presently. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Regards, >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Antonio >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> 2009/4/25 Patompong Kumdang <u500910052@xxxxxx>: >>>>>>>>>>>>>>>> Antonio, >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> I don't know about how to choose driver to in stall, >>>>>>>>>>>>>>>> I follow the step that Marv suggest. >>>>>>>>>>>>>>>> My username and password is a free account in my >>>>>>>>>>>>>>>> country.(it's >>>>>>>>>>>>>>>> safe ) >>>>>>>>>>>>>>>> In windows I don't use a special command. >>>>>>>>>>>>>>>> Now, I guess my modem can't sent signal to server. >>>>>>>>>>>>>>>> Do you listen the file that I sent to you. >>>>>>>>>>>>>>> Yes, I get typically the same sound when I dialup too! >>>>>>>>>>>>>>>> Thank you very much :) >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Tour. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> TouR, Marv >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> I don't know if this will make a difference, but since >>>>>>>>>>>>>>>>> your >>>>>>>>>>>>>>>>> using >>>>>>>>>>>>>>>>> precompiled SLMODEMD with ALSA support, your alsa version >>>>>>>>>>>>>>>>> is >>>>>>>>>>>>>>>>> 1.0.19 >>>>>>>>>>>>>>>>> and there does not exist a 1.0.19 >>>>>>>>>>>>>>>>> SLMODEMD.gcc4.3_alsa1.0.19.tar.gz. >>>>>>>>>>>>>>>>> Marv will it make a difference if he needs a >>>>>>>>>>>>>>>>> gcc4.3_alsa1.0.19 >>>>>>>>>>>>>>>>> SLMODEMD? เ��ย He is having difficulties getting >>>>>>>>>>>>>>>>> connected to >>>>>>>>>>>>>>>>> internet. >>>>>>>>>>>>>>>>> This email sent to Marv, and Jacques not to list so your >>>>>>>>>>>>>>>>> username >>>>>>>>>>>>>>>>> and >>>>>>>>>>>>>>>>> password will be safe! >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> TouR, >>>>>>>>>>>>>>>>> my wvdial.conf file looks this way: >>>>>>>>>>>>>>>>> [olivares@localhost ~]$ cat /etc/wvdial.conf >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> [Dialer Defaults] >>>>>>>>>>>>>>>>> Init2 = ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90 >>>>>>>>>>>>>>>>> Modem Type = Analog Modem >>>>>>>>>>>>>>>>> Phone = 7072000 >>>>>>>>>>>>>>>>> ISDN = 0 >>>>>>>>>>>>>>>>> Username = myusername >>>>>>>>>>>>>>>>> Init1 = ATZ >>>>>>>>>>>>>>>>> Password = ************ >>>>>>>>>>>>>>>>> Modem = /dev/ttySL0 >>>>>>>>>>>>>>>>> Baud = 460800 >>>>>>>>>>>>>>>>> Carrier Check = No >>>>>>>>>>>>>>>>> Stupid Mode = 1 >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> A SLMODEMD with alsa 1.0.19 might be his best bet? >>>>>>>>>>>>>>>>> เ��ย Don't >>>>>>>>>>>>>>>>> know >>>>>>>>>>>>>>>>> if >>>>>>>>>>>>>>>>> this >>>>>>>>>>>>>>>>> makes a difference, but why not ask? >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> http://linmodems.technion.ac.il/packages/smartlink/ >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Here's your wvdial.con >>>>>>>>>>>>>>>>> this is my wvdial.conf file >>>>>>>>>>>>>>>>> ------------------------------------- >>>>>>>>>>>>>>>>> [Dialer Defaults] >>>>>>>>>>>>>>>>> Modem = /dev/ttySL0 >>>>>>>>>>>>>>>>> Init1 = ATZ >>>>>>>>>>>>>>>>> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>>>>>>>>>>>>>> ;Stupid Mode = 1 >>>>>>>>>>>>>>>>> Modem Type = Analog Modem >>>>>>>>>>>>>>>>> Phone = 1222 >>>>>>>>>>>>>>>>> ISDN = 0 >>>>>>>>>>>>>>>>> Username = U89$0y)9@xxxxxxxxxxxxx >>>>>>>>>>>>>>>>> Carrier Check = no >>>>>>>>>>>>>>>>> Password = j4**9c+p >>>>>>>>>>>>>>>>> Baud = 460800 >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Jacques, เ��ย is a username allow characters like >>>>>>>>>>>>>>>>> ")" in >>>>>>>>>>>>>>>>> wvdial.conf ? >>>>>>>>>>>>>>>>> U89$0y)9@xxxxxxxxxxxxx เ��ย ? >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> I am looking for what your ISP requires, but can't seem >>>>>>>>>>>>>>>>> to >>>>>>>>>>>>>>>>> find >>>>>>>>>>>>>>>>> anything. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> http://www.tot.co.th/toten/index.php?option=com_content&task=view&id=363&Itemid=1121 >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> TouR >>>>>>>>>>>>>>>>> Do you use any special commands or strings to connect via >>>>>>>>>>>>>>>>> windows? >>>>>>>>>>>>>>>>> It is strange that the connection can't seem to get >>>>>>>>>>>>>>>>> through? >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> 2009/4/25 Patompong Kumdang <u500910052@xxxxxx>: >>>>>>>>>>>>>>>>>> Antonio, >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Thanks. for your help. :) >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> I try to modify wvdial.conf, But it has the same >>>>>>>>>>>>>>>>>> problem. >>>>>>>>>>>>>>>>>> I attach file that contain the sound that I hear when >>>>>>>>>>>>>>>>>> connect >>>>>>>>>>>>>>>>>> using ubuntu (001.wav) and using windows >>>>>>>>>>>>>>>>>> (003.wav)(windows >>>>>>>>>>>>>>>>>> can >>>>>>>>>>>>>>>>>> connect) >>>>>>>>>>>>>>>>>> I guess my modem can't sent information to server? >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> and this is my log file >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> ---------------------------------------------------------- >>>>>>>>>>>>>>>>>> Baud = 57,600 เ��ย , +MS=34 >>>>>>>>>>>>>>>>>> ---------------------------------------------------------- >>>>>>>>>>>>>>>>>> --> WvDial: Internet dialer version 1.60 >>>>>>>>>>>>>>>>>> --> Cannot get information for serial port. >>>>>>>>>>>>>>>>>> --> Initializing modem. >>>>>>>>>>>>>>>>>> --> Sending: ATZ >>>>>>>>>>>>>>>>>> ATZ >>>>>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>>>>> --> Sending: ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=34 >>>>>>>>>>>>>>>>>> ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=34 >>>>>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>>>>> --> Modem initialized. >>>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>>>>>>> --> No Carrier! เ��ย Trying again. >>>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>>>> --> Timed out while dialing. เ��ย Trying again. >>>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>>>> --> No Carrier! เ��ย Trying again. >>>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>>>> --> No Carrier! เ��ย Trying again. >>>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>>>> --> No Carrier! เ��ย Trying again. >>>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> ------------------------------------------------------------------ >>>>>>>>>>>>>>>>>> Baud = 57,600 เ��ย ,+MS=90 >>>>>>>>>>>>>>>>>> ------------------------------------------------------------------ >>>>>>>>>>>>>>>>>> --> WvDial: Internet dialer version 1.60 >>>>>>>>>>>>>>>>>> --> Cannot get information for serial port. >>>>>>>>>>>>>>>>>> --> Initializing modem. >>>>>>>>>>>>>>>>>> --> Sending: ATZ >>>>>>>>>>>>>>>>>> ATZ >>>>>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>>>>> --> Sending: ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90 >>>>>>>>>>>>>>>>>> ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90 >>>>>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>>>>> --> Modem initialized. >>>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>>>>>>> --> No Carrier! เ��ย Trying again. >>>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> ------------------------------------------------ >>>>>>>>>>>>>>>>>> Baud = 115,200 เ��ย , +MS=90 >>>>>>>>>>>>>>>>>> ------------------------------------------------ >>>>>>>>>>>>>>>>>> --> WvDial: Internet dialer version 1.60 >>>>>>>>>>>>>>>>>> --> Cannot get information for serial port. >>>>>>>>>>>>>>>>>> --> Initializing modem. >>>>>>>>>>>>>>>>>> --> Sending: ATZ >>>>>>>>>>>>>>>>>> ATZ >>>>>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>>>>> --> Sending: ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90 >>>>>>>>>>>>>>>>>> ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90 >>>>>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>>>>> --> Modem initialized. >>>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>>>>>>> --> No Carrier! เ��ย Trying again. >>>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> --------------------------------------------------------- >>>>>>>>>>>>>>>>>> Baud = 115,200 , เ��ย +MS=34 >>>>>>>>>>>>>>>>>> --------------------------------------------------------- >>>>>>>>>>>>>>>>>> --> WvDial: Internet dialer version 1.60 >>>>>>>>>>>>>>>>>> --> Cannot get information for serial port. >>>>>>>>>>>>>>>>>> --> Initializing modem. >>>>>>>>>>>>>>>>>> --> Sending: ATZ >>>>>>>>>>>>>>>>>> ATZ >>>>>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>>>>> --> Sending: ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=34 >>>>>>>>>>>>>>>>>> ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=34 >>>>>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>>>>> --> Modem initialized. >>>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>>>>>>> --> No Carrier! เ��ย Trying again. >>>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> ------------------------------------------------------------------ >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Tour, >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Try to modify wvdial.conf from >>>>>>>>>>>>>>>>>>> [Dialer Defaults] >>>>>>>>>>>>>>>>>>> Modem = /dev/ttySL0 >>>>>>>>>>>>>>>>>>> Init1 = ATZ >>>>>>>>>>>>>>>>>>> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>>>>>>>>>>>>>>>> ;Stupid Mode = 1 >>>>>>>>>>>>>>>>>>> Modem Type = Analog Modem >>>>>>>>>>>>>>>>>>> Phone = 1222 >>>>>>>>>>>>>>>>>>> ISDN = 0 >>>>>>>>>>>>>>>>>>> Username = U89$0y)9@xxxxxxxxxxxxx >>>>>>>>>>>>>>>>>>> Carrier Check = no >>>>>>>>>>>>>>>>>>> Password = ********** เ��ย <--- change this to >>>>>>>>>>>>>>>>>>> ***** be >>>>>>>>>>>>>>>>>>> careful >>>>>>>>>>>>>>>>>>> with >>>>>>>>>>>>>>>>>>> passwords others can take advantage when posting to >>>>>>>>>>>>>>>>>>> list >>>>>>>>>>>>>>>>>>> Baud = 460800 >>>>>>>>>>>>>>>>>>> to >>>>>>>>>>>>>>>>>>> [Dialer Defaults] >>>>>>>>>>>>>>>>>>> Modem = /dev/ttySL0 >>>>>>>>>>>>>>>>>>> Init1 = ATZ >>>>>>>>>>>>>>>>>>> Init2 = ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90 เ��ย >>>>>>>>>>>>>>>>>>>  <--- >>>>>>>>>>>>>>>>>>> เ��ย add X3 >>>>>>>>>>>>>>>>>>> option to >>>>>>>>>>>>>>>>>>> skip dialtone checking, and add +MS=90 you may try >>>>>>>>>>>>>>>>>>> +MS=34 >>>>>>>>>>>>>>>>>>> if >>>>>>>>>>>>>>>>>>> +MS=90 >>>>>>>>>>>>>>>>>>> does not help you get connected >>>>>>>>>>>>>>>>>>> Modem Type = Analog Modem >>>>>>>>>>>>>>>>>>> Phone = 1222 >>>>>>>>>>>>>>>>>>> Baud = 460800 เ��ย  <---- you can also try >>>>>>>>>>>>>>>>>>> lower bauds like >>>>>>>>>>>>>>>>>>> 115,200 or >>>>>>>>>>>>>>>>>>> 57,600 in case it is needed. >>>>>>>>>>>>>>>>>>> ISDN = 0 >>>>>>>>>>>>>>>>>>> Username = U89$0y)9@xxxxxxxxxxxxx >>>>>>>>>>>>>>>>>>> Password = ********** >>>>>>>>>>>>>>>>>>> Carrier Check = no >>>>>>>>>>>>>>>>>>> Stupid Mode = 1 เ��ย <--- remove the ";", it >>>>>>>>>>>>>>>>>>> might help get >>>>>>>>>>>>>>>>>>> you >>>>>>>>>>>>>>>>>>> connected >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Try that and report back. เ��ย Also, if for any >>>>>>>>>>>>>>>>>>> reason you >>>>>>>>>>>>>>>>>>> do >>>>>>>>>>>>>>>>>>> not >>>>>>>>>>>>>>>>>>> get >>>>>>>>>>>>>>>>>>> connected, try reading the DOCs/wvdial.txt file. >>>>>>>>>>>>>>>>>>> เ��ย In >>>>>>>>>>>>>>>>>>> that >>>>>>>>>>>>>>>>>>> file it >>>>>>>>>>>>>>>>>>> summarizes more of what I am recommending here. >>>>>>>>>>>>>>>>>>> เ��ย Also >>>>>>>>>>>>>>>>>>> try to >>>>>>>>>>>>>>>>>>> create >>>>>>>>>>>>>>>>>>> a >>>>>>>>>>>>>>>>>>> file that you may send should you fail to get >>>>>>>>>>>>>>>>>>> connected. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> ## เ��ย  เ��ย To make a logfile >>>>>>>>>>>>>>>>>>> wvdial.out >>>>>>>>>>>>>>>>>>> $ sudo wvdial 2>&1 | tee wvdial.out >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> and attach wvdial.out to list. เ��ย You may >>>>>>>>>>>>>>>>>>> also read up on >>>>>>>>>>>>>>>>>>> Jacques' >>>>>>>>>>>>>>>>>>> post-install troubleshooting guide/howto : >>>>>>>>>>>>>>>>>>> http://linmodems.technion.ac.il/post-install.html >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Regards, >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Antonio >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> 2009/4/24 Patompong Kumdang <u500910052@xxxxxx>: >>>>>>>>>>>>>>>>>>>> Hello, >>>>>>>>>>>>>>>>>>>> I'm Tour, Thailand >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> I cannot connect to internet by using my internal >>>>>>>>>>>>>>>>>>>> modem. >>>>>>>>>>>>>>>>>>>> I use ubuntu 8.1 เ��ย kernel 2.6.27-10-generic >>>>>>>>>>>>>>>>>>>> when I connect, I can hear the dial tone like as >>>>>>>>>>>>>>>>>>>> connect >>>>>>>>>>>>>>>>>>>> by >>>>>>>>>>>>>>>>>>>> windows, >>>>>>>>>>>>>>>>>>>> But the sound that I hear not the same, It stop sound >>>>>>>>>>>>>>>>>>>> later. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> (I guss you เ��ย know that I tell, my english >>>>>>>>>>>>>>>>>>>> not very >>>>>>>>>>>>>>>>>>>> well) >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> this is my wvdial.conf >>>>>>>>>>>>>>>>>>>> ------------------------------------------- >>>>>>>>>>>>>>>>>>>> root@tourcom-laptop:/home/tourcom# wvdialconf >>>>>>>>>>>>>>>>>>>> /etc/wvdial.conf >>>>>>>>>>>>>>>>>>>> Editing `/etc/wvdial.conf'. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Scanning your serial ports for a modem. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Modem Port Scan<*1>: S0 เ��ย  S1 เ��ย >>>>>>>>>>>>>>>>>>>>  S2 เ��ย  S3 >>>>>>>>>>>>>>>>>>>> WvModem<*1>: Cannot get information for serial port. >>>>>>>>>>>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 -- OK >>>>>>>>>>>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 Z -- OK >>>>>>>>>>>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 -- OK >>>>>>>>>>>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK >>>>>>>>>>>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK >>>>>>>>>>>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK >>>>>>>>>>>>>>>>>>>> ttySL0<*1>: Modem Identifier: ATI -- SmartLink Soft >>>>>>>>>>>>>>>>>>>> Modem >>>>>>>>>>>>>>>>>>>> ttySL0<*1>: Speed 4800: AT -- OK >>>>>>>>>>>>>>>>>>>> ttySL0<*1>: Speed 9600: AT -- OK >>>>>>>>>>>>>>>>>>>> ttySL0<*1>: Speed 19200: AT -- OK >>>>>>>>>>>>>>>>>>>> ttySL0<*1>: Speed 38400: AT -- OK >>>>>>>>>>>>>>>>>>>> ttySL0<*1>: Speed 57600: AT -- OK >>>>>>>>>>>>>>>>>>>> ttySL0<*1>: Speed 115200: AT -- OK >>>>>>>>>>>>>>>>>>>> ttySL0<*1>: Speed 230400: AT -- OK >>>>>>>>>>>>>>>>>>>> ttySL0<*1>: Speed 460800: AT -- OK >>>>>>>>>>>>>>>>>>>> ttySL0<*1>: Max speed is 460800; that should be safe. >>>>>>>>>>>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Found a modem on /dev/ttySL0. >>>>>>>>>>>>>>>>>>>> Modem configuration written to /etc/wvdial.conf. >>>>>>>>>>>>>>>>>>>> ttySL0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 >>>>>>>>>>>>>>>>>>>> &D2 >>>>>>>>>>>>>>>>>>>> +FCLASS=0" >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> this is the script when I connect >>>>>>>>>>>>>>>>>>>> ---------------------------------------------------------- >>>>>>>>>>>>>>>>>>>> Script started on Sat 25 Apr 2009 09:48:30 AM ICT >>>>>>>>>>>>>>>>>>>> เ��ย ]0;root@tourcom-laptop: /home/tourcom >>>>>>>>>>>>>>>>>>>> root@tourcom-laptop:/home/tourcom# >>>>>>>>>>>>>>>>>>>> wvdial >>>>>>>>>>>>>>>>>>>> --> WvDial: Internet dialer version 1.60 >>>>>>>>>>>>>>>>>>>> --> Cannot get information for serial port. >>>>>>>>>>>>>>>>>>>> --> Initializing modem. >>>>>>>>>>>>>>>>>>>> --> Sending: ATZ >>>>>>>>>>>>>>>>>>>> ATZ >>>>>>>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>>>>>>> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>>>>>>>>>>>>>>>>> ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>>>>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>>>>>>> --> Modem initialized. >>>>>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>>>>>>>>> --> No Carrier! เ��ย Trying again. >>>>>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>>>>>> ^CCaught signal 2: เ��ย Attempting to exit >>>>>>>>>>>>>>>>>>>> gracefully... >>>>>>>>>>>>>>>>>>>> --> Disconnecting at Sat Apr 25 09:49:42 2009 >>>>>>>>>>>>>>>>>>>> เ��ย ]0;root@tourcom-laptop: /home/tourcom >>>>>>>>>>>>>>>>>>>> root@tourcom-laptop:/home/tourcom# >>>>>>>>>>>>>>>>>>>> exit >>>>>>>>>>>>>>>>>>>> exit >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Script done on Sat 25 Apr 2009 09:49:45 AM ICT >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> this is my wvdial.conf file >>>>>>>>>>>>>>>>>>>> ------------------------------------- >>>>>>>>>>>>>>>>>>>> [Dialer Defaults] >>>>>>>>>>>>>>>>>>>> Modem = /dev/ttySL0 >>>>>>>>>>>>>>>>>>>> Init1 = ATZ >>>>>>>>>>>>>>>>>>>> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>>>>>>>>>>>>>>>>> ;Stupid Mode = 1 >>>>>>>>>>>>>>>>>>>> Modem Type = Analog Modem >>>>>>>>>>>>>>>>>>>> Phone = 1222 >>>>>>>>>>>>>>>>>>>> ISDN = 0 >>>>>>>>>>>>>>>>>>>> Username = U89$0y)9@xxxxxxxxxxxxx >>>>>>>>>>>>>>>>>>>> Carrier Check = no >>>>>>>>>>>>>>>>>>>> Password = j4**9c+p >>>>>>>>>>>>>>>>>>>> Baud = 460800 >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> <div><br></div> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> <div><br></div> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> <div><br></div> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>>>>> >>>>> >>>> >>>> >>> >> >> > >
