Antonio, MarvS Can I try another way to connect to internet. Tour. > The MS drivers provide no additional useful information, beyond that > of the ModemData.txt > More this evening. > > MarvS > > 2009/4/27 Patompong Kumdang <u500910052@xxxxxx>: >> Antonio, MarvS >> >> Sorry, ftp://u500910052@xxxxxxxxxxx/public_html/Modem.zip is broken. >> >> Please use this link to download again. >> http://mail.cm.edu/~u500910052/Modem.zip >> >> Thanks, >> Tour. >> >> >> >> >>> Antonio, MarvS >>> >>> Can this windows driver tell you more information about my modem. >>> please download these file at: >>> ftp://u500910052@xxxxxxxxxxx/public_html/Modem.zip >>> (sorry, my mail can not sent .zip file) >>> >>> Thanks, >>> Tour. >>> >>> >>> >>>> Antonio >>>> >>>> "The ALSA verion is 1.0.19" output from the scanModem script is from a >>>> call: >>>> aplay --version >>>> and this is typically matched with other ALSA components of an >>>> installation. >>>> >>>> On the Ubuntu Jaunty I just upgraded to: >>>> aplay --version >>>> aplay: version 1.0.18 by Jaroslav Kysela <perex@xxxxxxxx> >>>> So if is indeed puzzling as to why TouRs is 1.0.19 >>>> >>>> TourR, >>>> Have you done any cogent alternations to your System. >>>> >>>> MarvS >>>> >>>> >>>> On Sun, Apr 26, 2009 at 10:05 PM, Antonio Olivares >>>> <olivares14031@xxxxxxxxx> wrote: >>>>> Tour and Marv, >>>>> >>>>> I am trying to follow this carefully seeing where I can help, I see a >>>>> problem here and I do not know why this is happening? >>>>> >>>>> /usr/src/modules/alsa/alsa-driver-1.0.16/pci/hda/hda_intel.c:634: >>>>> ย hda_intel: azx_get_response timeout, switching to polling mode: >>>>> last >>>>> ย cmd=0x10490000 >>>>> >>>>> With the old ModemData.txt and the new one just sent, the alsa >>>>> version >>>>> is 1.0.19. ย This does not make sense. >>>>> >>>>> ===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== >>>>> The ALSA packages provide audio support and also drivers for some >>>>> modems. >>>>> ALSA diagnostics are written during bootup to /proc/asound/ folders. >>>>> >>>>> The ALSA verion is 1.0.19 >>>>> The modem cards detected by "aplay -l" ย are: >>>>> card 0: Intel [HDA Intel], device 6: Si3054 Modem [Si3054 Modem] >>>>> >>>>> The /proc/asound/pcm file reports: >>>>> ----------------------- >>>>> 00-00: ALC883 Analog : ALC883 Analog : playback 1 : capture 1 >>>>> 00-01: ALC883 Digital : ALC883 Digital : playback 1 >>>>> 00-02: ALC883 Analog : ALC883 Analog : capture 1 >>>>> 00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1 >>>>> >>>>> about /proc/asound/cards: >>>>> ------------------------ >>>>> ย 0 [Intel ย ย ย ย ย ]: HDA-Intel - HDA Intel >>>>> ย ย ย ย ย ย ย ย ย ย ย HDA >>>>> Intel at 0xd0340000 irq 22 >>>>> >>>>> ย PCI slot 00:1b.0 has a High Definition Audio Card >>>>> ย The drivers are in the kernel modules tree at: >>>>> ย /lib/modules/2.6.27-10-generic/kernel/sound/pci/hda/snd-hda-intel.ko >>>>> /lib/modules/2.6.27-11-generic/kernel/sound/pci/hda/snd-hda-intel.ko >>>>> /lib/modules/2.6.27-11-server/kernel/sound/pci/hda/snd-hda-intel.ko >>>>> ย The modem codec file for the HDA card is: >>>>> /proc/asound/card0/codec#1 >>>>> >>>>> >>>>> I am thinking also since the alsa-version is 1.0.19, shouldn't the >>>>> precompiled SLMODEMD.gcc4.3.tar.gz serve, a new one with >>>>> -alsa-1.0.19.tar.gz probably needs to be created? >>>>> >>>>> My $0.02 >>>>> >>>>> Regards, >>>>> >>>>> Antonio >>>>> >>>>> On 4/27/09, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> wrote: >>>>>> Tour >>>>>> >>>>>> For the Intel537 do: >>>>>> >>>>>> $ find /lib/modules --name Intel537*.ko >>>>>> and delete any modules found. >>>>>> >>>>>> There may also be residual Intel537 files like: >>>>>> ย ย ย /etc/init.d/537_boot >>>>>> ย ย ย /etc/hamregistry.bin >>>>>> ย ย ย /usr/sbin/usrsound >>>>>> ย ย ย /usr/sbin/hamregistry >>>>>> that should be removed. >>>>>> >>>>>> MarvS >>>>>> >>>>>> 2009/4/26 Patompong Kumdang <u500910052@xxxxxx>: >>>>>>> hello, >>>>>>> This time I will tell you more information about my computer. >>>>>>> >>>>>>>>>>Here above shows that you apparently used a USB modem with >>>>>>>>>> >>>device >>>>>>> /dev/ttyACM0 >>>>>>>>>>that has nothing to do with the device that you apparently need >>>>>>>>>> to >>>>>>>>>> use >>>>>>>>>>/dev/ttySL0 >>>>>>> I use mobile phone to connect to internet last week. (It can >>>>>>> connect) >>>>>>> >>>>>>> >>>>>>>>>>Here wlan0 is another interface that is not needed when you are >>>>>>>>>> trying >>>>>>>>>>to connect with dialup. >>>>>>>>>>It needs to be shut off to troubleshoot the dialup connection. >>>>>>> I have wireless modem and lan card too, but I not use at this time. >>>>>>> >>>>>>> >>>>>>>>>>What is this ? >>>>>>>>>>Apr 20 14:45:38 tourcom-laptop kernel: [ ย 51.034653] >>>>>>>>>> Intel537: >>>>>>>>>>disagrees about version of symbol struct_module >>>>>>>>>>Apr 20 14:45:38 tourcom-laptop kernel: [ ย 51.081436] >>>>>>>>>> Intel537: >>>>>>>>>>disagrees about version of symbol struct_module >>>>>>> I don't know about this driver. >>>>>>> >>>>>>> >>>>>>> >>>>>>>>>>there seems to be an Intel537 driver on your system from some >>>>>>>>>> previous >>>>>>> attempt, >>>>>>>>>>which may be interfering. >>>>>>>>>>Please uninstall/delete this driver from your System. >>>>>>> I don't know how to remove this driver. >>>>>>> >>>>>>> >>>>>>> >>>>>>>>>>When attempting to >>>>>>>>>>connect, open a terminal and type >>>>>>>>>>$ sudo tail -f /var/log/messages >>>>>>> I have got this message >>>>>>> >>>>>>> root@tourcom-laptop:/home/tourcom# sudo tail -f /var/log/messages >>>>>>> >>>>>>> Apr 27 07:19:32 tourcom-laptop kernel: [ ย 53.691210] [drm] >>>>>>> Initialized >>>>>>> drm 1.1.0 20060810 >>>>>>> Apr 27 07:19:32 tourcom-laptop kernel: [ ย 53.698167] pci >>>>>>> 0000:00:02.0: >>>>>>> PCI INT A -> GSI 16 (level, low) -> IRQ 16 >>>>>>> Apr 27 07:19:32 tourcom-laptop kernel: [ ย 53.699489] [drm] >>>>>>> Initialized >>>>>>> i915 1.6.0 20060119 on minor 0 >>>>>>> Apr 27 07:19:33 tourcom-laptop kernel: [ ย 54.444472] sky2 >>>>>>> eth0: >>>>>>> enabling >>>>>>> interface >>>>>>> Apr 27 07:19:33 tourcom-laptop kernel: [ ย 54.447579] >>>>>>> ADDRCONF(NETDEV_UP): >>>>>>> eth0: link is not ready >>>>>>> Apr 27 07:19:37 tourcom-laptop pulseaudio[6044]: ltdl-bind-now.c: >>>>>>> Failed >>>>>>> to find original dlopen loader. >>>>>>> Apr 27 07:19:37 tourcom-laptop pulseaudio[6047]: main.c: >>>>>>> setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted >>>>>>> Apr 27 07:19:37 tourcom-laptop pulseaudio[6047]: main.c: >>>>>>> setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted >>>>>>> Apr 27 07:27:37 tourcom-laptop kernel: [ ย 538.346544] sky2 >>>>>>> eth0: >>>>>>> disabling >>>>>>> interface >>>>>>> Apr 27 07:31:26 tourcom-laptop kernel: [ ย 766.852013] ALSA >>>>>>> /usr/src/modules/alsa/alsa-driver-1.0.16/pci/hda/hda_intel.c:634: >>>>>>> hda_intel: azx_get_response timeout, switching to polling mode: >>>>>>> last >>>>>>> cmd=0x10490000 >>>>>>> >>>>>>> >>>>>>> I sent my new scanmodem data to you. >>>>>>> please help me to follow the step that you advice with a command >>>>>>> code. >>>>>>> >>>>>>> Thank you, >>>>>>> >>>>>>> Tour. >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>> Tour, >>>>>>>> >>>>>>>> I looked back at your ModemData.txt sent a few days ago, it does >>>>>>>> not >>>>>>>> agree with output from scanModem :(, >>>>>>>> >>>>>>>> http://www.nabble.com/Please-help-me-to-set-up-my-modem-to23204381.html >>>>>>>> >>>>>>>> In the scanModem that you sent the alsa version is 1.0.19, and >>>>>>>> with >>>>>>>> the output messages that you sent it is 1.0.16 : >>>>>>>> >>>>>>>> Apr 24 16:19:38 tourcom-laptop kernel: [ ย 731.524013] ALSA >>>>>>>> /usr/src/modules/alsa/alsa-driver-1.0.16/pci/hda/hda_intel.c:634: >>>>>>>> hda_intel: azx_get_response timeout, switching to polling mode: >>>>>>>> last >>>>>>>> cmd=0x10490000 >>>>>>>> >>>>>>>> would you mind sending ModemData.txt again, re run scanModem and >>>>>>>> send >>>>>>>> it back to list. ย It is hard to troubleshoot with too many >>>>>>>> things >>>>>>>> going on. >>>>>>>> >>>>>>>> Regards, >>>>>>>> >>>>>>>> Antonio >>>>>>>> >>>>>>>> On 4/26/09, Antonio Olivares <olivares14031@xxxxxxxxx> wrote: >>>>>>>>> Tour, >>>>>>>>> >>>>>>>>> I see too many interfaces interfering with your connection(s). >>>>>>>>> >>>>>>>>> Apr 25 17:31:34 tourcom-laptop kernel: [ ย 231.792507] PPP >>>>>>>>> generic >>>>>>>>> driver version 2.4.2 >>>>>>>>> Apr 25 17:31:34 tourcom-laptop pppd[6494]: pppd 2.4.4 started by >>>>>>>>> root, >>>>>>>>> uid >>>>>>>>> 0 >>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (BUSY) >>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (NO CARRIER) >>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (VOICE) >>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (NO DIALTONE) >>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (NO DIAL >>>>>>>>> TONE) >>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (NO ANSWER) >>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (DELAYED) >>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: send (ATZ^M) >>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: expect (OK) >>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: ATZ^M^M >>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: OK >>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: ย -- got it >>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: send (ATDT#99^M) >>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: expect (CONNECT) >>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: ^M >>>>>>>>> Apr 25 17:31:38 tourcom-laptop chat[6499]: ATDT#99^M^M >>>>>>>>> Apr 25 17:31:38 tourcom-laptop chat[6499]: NO CARRIER >>>>>>>>> Apr 25 17:31:38 tourcom-laptop chat[6499]: ย -- failed >>>>>>>>> Apr 25 17:31:38 tourcom-laptop chat[6499]: Failed (NO CARRIER) >>>>>>>>> Apr 25 17:31:39 tourcom-laptop pppd[6494]: Exit. >>>>>>>>> Apr 25 17:35:17 tourcom-laptop pppd[6536]: pppd 2.4.4 started by >>>>>>>>> root, >>>>>>>>> uid >>>>>>>>> 0 >>>>>>>>> Apr 25 17:35:17 tourcom-laptop pppd[6536]: Using interface ppp0 >>>>>>>>> Apr 25 17:35:17 tourcom-laptop pppd[6536]: Connect: ppp0 <--> >>>>>>>>> /dev/ttyACM0 >>>>>>>>> Apr 25 17:35:36 tourcom-laptop pppd[6536]: Serial line is looped >>>>>>>>> back. >>>>>>>>> Apr 25 17:35:36 tourcom-laptop pppd[6536]: Connection terminated. >>>>>>>>> Apr 25 17:35:36 tourcom-laptop pppd[6536]: Exit. >>>>>>>>> Apr 25 17:37:38 tourcom-laptop pppd[6563]: pppd 2.4.4 started by >>>>>>>>> root, >>>>>>>>> uid >>>>>>>>> 0 >>>>>>>>> Apr 25 17:37:38 tourcom-laptop pppd[6563]: Using interface ppp0 >>>>>>>>> Apr 25 17:37:38 tourcom-laptop pppd[6563]: Connect: ppp0 <--> >>>>>>>>> /dev/ttyACM0 >>>>>>>>> Apr 25 17:37:56 tourcom-laptop pppd[6563]: Serial line is looped >>>>>>>>> back. >>>>>>>>> Apr 25 17:37:56 tourcom-laptop pppd[6563]: Connection terminated. >>>>>>>>> Apr 25 17:37:56 tourcom-laptop pppd[6563]: Exit. >>>>>>>>> Apr 25 17:39:19 tourcom-laptop pppd[6583]: pppd 2.4.4 started by >>>>>>>>> root, >>>>>>>>> uid >>>>>>>>> 0 >>>>>>>>> Apr 25 17:39:19 tourcom-laptop pppd[6583]: Using interface ppp0 >>>>>>>>> Apr 25 17:39:19 tourcom-laptop pppd[6583]: Connect: ppp0 <--> >>>>>>>>> /dev/ttyACM0 >>>>>>>>> Apr 25 17:39:24 tourcom-laptop pppd[6583]: PAP authentication >>>>>>>>> succeeded >>>>>>>>> Apr 25 17:39:24 tourcom-laptop kernel: [ ย 701.755111] PPP BSD >>>>>>>>> Compression module registered >>>>>>>>> Apr 25 17:39:24 tourcom-laptop kernel: [ ย 701.833370] PPP >>>>>>>>> Deflate >>>>>>>>> Compression module registered >>>>>>>>> Apr 25 17:39:39 tourcom-laptop pppd[6583]: local ย IP address >>>>>>>>> 10.174.152.18 >>>>>>>>> Apr 25 17:39:39 tourcom-laptop pppd[6583]: remote IP address >>>>>>>>> 10.1.1.1 >>>>>>>>> Apr 25 17:39:39 tourcom-laptop pppd[6583]: primary ย DNS >>>>>>>>> address >>>>>>>>> 203.146.237.237 >>>>>>>>> Apr 25 17:39:39 tourcom-laptop pppd[6583]: secondary DNS address >>>>>>>>> 202.149.24.5 >>>>>>>>> Apr 25 17:42:07 tourcom-laptop pppd[6583]: Terminating on signal >>>>>>>>> 15 >>>>>>>>> Apr 25 17:42:07 tourcom-laptop pppd[6583]: Connect time 2.5 >>>>>>>>> minutes. >>>>>>>>> Apr 25 17:42:07 tourcom-laptop pppd[6583]: Sent 68036 bytes, >>>>>>>>> received >>>>>>>>> 263473 bytes. >>>>>>>>> Apr 25 17:42:07 tourcom-laptop pppd[6583]: Connection terminated. >>>>>>>>> Apr 25 17:42:07 tourcom-laptop pppd[6583]: Exit. >>>>>>>>> Apr 25 17:42:15 tourcom-laptop kernel: [ ย 873.128154] usb >>>>>>>>> 2-2: USB >>>>>>>>> disconnect, address 2 >>>>>>>>> >>>>>>>>> Here above shows that you apparently used a USB modem with device >>>>>>>>> /dev/ttyACM0 >>>>>>>>> that has nothing to do with the device that you apparently need >>>>>>>>> to >>>>>>>>> use >>>>>>>>> /dev/ttySL0 >>>>>>>>> >>>>>>>>> >>>>>>>>> Apr 24 22:05:24 tourcom-laptop pppd[6415]: pppd 2.4.4 started by >>>>>>>>> root, >>>>>>>>> uid >>>>>>>>> 0 >>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (BUSY) >>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (NO CARRIER) >>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (VOICE) >>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (NO DIALTONE) >>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (NO DIAL >>>>>>>>> TONE) >>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (NO ANSWER) >>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (DELAYED) >>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: send (ATZ^M) >>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: expect (OK) >>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: ^M^M^MATZ^M^M >>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: OK >>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: ย -- got it >>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: send (ATDT1222^M) >>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: expect (CONNECT) >>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: ^M >>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: ATDT1222^M^M >>>>>>>>> Apr 24 22:06:03 tourcom-laptop chat[6420]: NO CARRIER >>>>>>>>> Apr 24 22:06:03 tourcom-laptop chat[6420]: ย -- failed >>>>>>>>> Apr 24 22:06:03 tourcom-laptop chat[6420]: Failed (NO CARRIER) >>>>>>>>> Apr 24 22:06:04 tourcom-laptop pppd[6415]: Exit. >>>>>>>>> Apr 24 22:07:13 tourcom-laptop kernel: [ ย 380.500015] ALSA >>>>>>>>> /usr/src/modules/alsa/alsa-driver-1.0.16/pci/hda/hda_intel.c:634: >>>>>>>>> hda_intel: azx_get_response timeout, switching to polling mode: >>>>>>>>> last >>>>>>>>> cmd=0x10490000 >>>>>>>>> Apr 24 22:07:51 tourcom-laptop pppd[6443]: pppd 2.4.4 started by >>>>>>>>> root, >>>>>>>>> uid >>>>>>>>> 0 >>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (BUSY) >>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (NO CARRIER) >>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (VOICE) >>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (NO DIALTONE) >>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (NO DIAL >>>>>>>>> TONE) >>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (NO ANSWER) >>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (DELAYED) >>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: send (ATZ^M) >>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: expect (OK) >>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: ^M^M^MATZ^M^M >>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: OK >>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: ย -- got it >>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: send (ATDT1222^M) >>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: expect (CONNECT) >>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: ^M >>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: ATDT1222^M^M >>>>>>>>> Apr 24 22:08:30 tourcom-laptop chat[6445]: NO CARRIER >>>>>>>>> Apr 24 22:08:30 tourcom-laptop chat[6445]: ย -- failed >>>>>>>>> Apr 24 22:08:30 tourcom-laptop chat[6445]: Failed (NO CARRIER) >>>>>>>>> Apr 24 22:08:31 tourcom-laptop pppd[6443]: Exit. >>>>>>>>> >>>>>>>>> Here wlan0 is another interface that is not needed when you are >>>>>>>>> trying >>>>>>>>> to connect with dialup. >>>>>>>>> It needs to be shut off to troubleshoot the dialup connection. >>>>>>>>> >>>>>>>>> $ sudo ifconfig wlan0 down >>>>>>>>> and all others too like eth0, eth1 etc. >>>>>>>>> >>>>>>>>> >>>>>>>>> Apr 20 14:45:17 tourcom-laptop kernel: [ ย 22.526400] wlan0: >>>>>>>>> ethernet >>>>>>>>> device 00:16:cf:73:b1:97 using serialized NDIS driver: net5211, >>>>>>>>> version: 0x40002, NDIS version: 0x501, vendor: 'NDIS Network >>>>>>>>> Adapter', >>>>>>>>> 168C:001A.5.conf >>>>>>>>> Apr 20 14:45:17 tourcom-laptop kernel: [ ย 22.543385] >>>>>>>>> acer-wmi: >>>>>>>>> Acer >>>>>>>>> Laptop ACPI-WMI Extras >>>>>>>>> Apr 20 14:45:17 tourcom-laptop kernel: [ ย 22.568075] wlan0: >>>>>>>>> encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; >>>>>>>>> AES/CCMP with WPA, WPA2, WPA2PSK >>>>>>>>> >>>>>>>>> >>>>>>>>> What is this ? >>>>>>>>> >>>>>>>>> Apr 20 14:45:38 tourcom-laptop kernel: [ ย 51.034653] >>>>>>>>> Intel537: >>>>>>>>> disagrees about version of symbol struct_module >>>>>>>>> Apr 20 14:45:38 tourcom-laptop kernel: [ ย 51.081436] >>>>>>>>> Intel537: >>>>>>>>> disagrees about version of symbol struct_module >>>>>>>>> >>>>>>>>> Intel537 modem?? ย too, ย Did not see that one when you >>>>>>>>> sent >>>>>>>>> ModemData.txt first. >>>>>>>>> >>>>>>>>> >>>>>>>>> Apr 20 14:45:40 tourcom-laptop kernel: [ ย 53.644280] sky2 >>>>>>>>> eth0: >>>>>>>>> enabling interface >>>>>>>>> Apr 20 14:45:40 tourcom-laptop kernel: [ ย 53.647244] >>>>>>>>> ADDRCONF(NETDEV_UP): eth0: link is not ready >>>>>>>>> Apr 20 14:45:42 tourcom-laptop kernel: [ ย 55.293253] sky2 >>>>>>>>> eth0: >>>>>>>>> Link >>>>>>>>> is up at 100 Mbps, full duplex, flow control both >>>>>>>>> >>>>>>>>> >>>>>>>>> Apr 20 18:23:18 tourcom-laptop kernel: [ 1837.606047] sky2 eth0: >>>>>>>>> Link is >>>>>>>>> down. >>>>>>>>> Apr 20 18:23:20 tourcom-laptop kernel: [ 1839.206504] sky2 eth0: >>>>>>>>> Link >>>>>>>>> is up at 100 Mbps, full duplex, flow control both >>>>>>>>> Apr 20 18:23:26 tourcom-laptop kernel: [ 1845.688796] sky2 eth0: >>>>>>>>> Link is >>>>>>>>> down. >>>>>>>>> Apr 20 18:23:52 tourcom-laptop kernel: [ 1871.418303] sky2 eth0: >>>>>>>>> Link >>>>>>>>> is up at 100 Mbps, full duplex, flow control both >>>>>>>>> Apr 20 18:34:19 tourcom-laptop kernel: [ 2498.381516] device eth0 >>>>>>>>> left >>>>>>>>> promiscuous mode >>>>>>>>> >>>>>>>>> Try one thing at a time. ย You are trying to do too much. >>>>>>>>> ย If you >>>>>>>>> want >>>>>>>>> to connect with slmodemd use that and that only. ย When >>>>>>>>> attempting >>>>>>>>> to >>>>>>>>> connect, open a terminal and type >>>>>>>>> $ sudo tail -f /var/log/messages >>>>>>>>> >>>>>>>>> send only the parts when the connection is taking place and when >>>>>>>>> it >>>>>>>>> fails. >>>>>>>>> >>>>>>>>> Regards, >>>>>>>>> >>>>>>>>> Antonio >>>>>>>>> >>>>>>>>> On 4/26/09, Patompong Kumdang <u500910052@xxxxxx> wrote: >>>>>>>>>> Hello, >>>>>>>>>> I heve sent this log file to you. >>>>>>>>>> >>>>>>>>>> Thank you. >>>>>>>>>> >>>>>>>>>> Tour. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>>> Tour, >>>>>>>>>>> >>>>>>>>>>> Could you try to make a log file of your session >>>>>>>>>>> >>>>>>>>>>> $ sudo wvdial 2>&1 | tee wvdial.out >>>>>>>>>>> >>>>>>>>>>> send wvdial.out to us(list) >>>>>>>>>>> >>>>>>>>>>> ย and attach output of >>>>>>>>>>> $ sudo tail -f var/log/messages >>>>>>>>>>> >>>>>>>>>>> Report back presently. >>>>>>>>>>> >>>>>>>>>>> Regards, >>>>>>>>>>> >>>>>>>>>>> Antonio >>>>>>>>>>> >>>>>>>>>>> 2009/4/25 Patompong Kumdang <u500910052@xxxxxx>: >>>>>>>>>>>> Antonio, >>>>>>>>>>>> >>>>>>>>>>>> I don't know about how to choose driver to in stall, >>>>>>>>>>>> I follow the step that Marv suggest. >>>>>>>>>>>> My username and password is a free account in my country.(it's >>>>>>>>>>>> safe ) >>>>>>>>>>>> In windows I don't use a special command. >>>>>>>>>>>> Now, I guess my modem can't sent signal to server. >>>>>>>>>>>> Do you listen the file that I sent to you. >>>>>>>>>>> >>>>>>>>>>> Yes, I get typically the same sound when I dialup too! >>>>>>>>>>>> >>>>>>>>>>>> Thank you very much :) >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> Tour. >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>>> TouR, Marv >>>>>>>>>>>>> >>>>>>>>>>>>> I don't know if this will make a difference, but since your >>>>>>>>>>>>> using >>>>>>>>>>>>> precompiled SLMODEMD with ALSA support, your alsa version is >>>>>>>>>>>>> 1.0.19 >>>>>>>>>>>>> and there does not exist a 1.0.19 >>>>>>>>>>>>> SLMODEMD.gcc4.3_alsa1.0.19.tar.gz. >>>>>>>>>>>>> Marv will it make a difference if he needs a >>>>>>>>>>>>> gcc4.3_alsa1.0.19 >>>>>>>>>>>>> SLMODEMD? ย He is having difficulties getting connected to >>>>>>>>>>>>> internet. >>>>>>>>>>>>> This email sent to Marv, and Jacques not to list so your >>>>>>>>>>>>> username >>>>>>>>>>>>> and >>>>>>>>>>>>> password will be safe! >>>>>>>>>>>>> >>>>>>>>>>>>> TouR, >>>>>>>>>>>>> my wvdial.conf file looks this way: >>>>>>>>>>>>> [olivares@localhost ~]$ cat /etc/wvdial.conf >>>>>>>>>>>>> >>>>>>>>>>>>> [Dialer Defaults] >>>>>>>>>>>>> Init2 = ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90 >>>>>>>>>>>>> Modem Type = Analog Modem >>>>>>>>>>>>> Phone = 7072000 >>>>>>>>>>>>> ISDN = 0 >>>>>>>>>>>>> Username = myusername >>>>>>>>>>>>> Init1 = ATZ >>>>>>>>>>>>> Password = ************ >>>>>>>>>>>>> Modem = /dev/ttySL0 >>>>>>>>>>>>> Baud = 460800 >>>>>>>>>>>>> Carrier Check = No >>>>>>>>>>>>> Stupid Mode = 1 >>>>>>>>>>>>> >>>>>>>>>>>>> A SLMODEMD with alsa 1.0.19 might be his best bet? ย Don't >>>>>>>>>>>>> know >>>>>>>>>>>>> if >>>>>>>>>>>>> this >>>>>>>>>>>>> makes a difference, but why not ask? >>>>>>>>>>>>> >>>>>>>>>>>>> http://linmodems.technion.ac.il/packages/smartlink/ >>>>>>>>>>>>> >>>>>>>>>>>>> Here's your wvdial.con >>>>>>>>>>>>> this is my wvdial.conf file >>>>>>>>>>>>> ------------------------------------- >>>>>>>>>>>>> [Dialer Defaults] >>>>>>>>>>>>> Modem = /dev/ttySL0 >>>>>>>>>>>>> Init1 = ATZ >>>>>>>>>>>>> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>>>>>>>>>> ;Stupid Mode = 1 >>>>>>>>>>>>> Modem Type = Analog Modem >>>>>>>>>>>>> Phone = 1222 >>>>>>>>>>>>> ISDN = 0 >>>>>>>>>>>>> Username = U89$0y)9@xxxxxxxxxxxxx >>>>>>>>>>>>> Carrier Check = no >>>>>>>>>>>>> Password = j4**9c+p >>>>>>>>>>>>> Baud = 460800 >>>>>>>>>>>>> >>>>>>>>>>>>> Jacques, ย is a username allow characters like ")" in >>>>>>>>>>>>> wvdial.conf ? >>>>>>>>>>>>> U89$0y)9@xxxxxxxxxxxxx ย ? >>>>>>>>>>>>> >>>>>>>>>>>>> I am looking for what your ISP requires, but can't seem to >>>>>>>>>>>>> find >>>>>>>>>>>>> anything. >>>>>>>>>>>>> >>>>>>>>>>>>> http://www.tot.co.th/toten/index.php?option=com_content&task=view&id=363&Itemid=1121 >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> TouR >>>>>>>>>>>>> Do you use any special commands or strings to connect via >>>>>>>>>>>>> windows? >>>>>>>>>>>>> It is strange that the connection can't seem to get through? >>>>>>>>>>>>> >>>>>>>>>>>>> 2009/4/25 Patompong Kumdang <u500910052@xxxxxx>: >>>>>>>>>>>>>> >>>>>>>>>>>>>> Antonio, >>>>>>>>>>>>>> >>>>>>>>>>>>>> Thanks. for your help. :) >>>>>>>>>>>>>> >>>>>>>>>>>>>> I try to modify wvdial.conf, But it has the same problem. >>>>>>>>>>>>>> I attach file that contain the sound that I hear when >>>>>>>>>>>>>> connect >>>>>>>>>>>>>> using ubuntu (001.wav) and using windows (003.wav)(windows >>>>>>>>>>>>>> can >>>>>>>>>>>>>> connect) >>>>>>>>>>>>>> I guess my modem can't sent information to server? >>>>>>>>>>>>>> >>>>>>>>>>>>>> and this is my log file >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> ---------------------------------------------------------- >>>>>>>>>>>>>> Baud = 57,600 ย , +MS=34 >>>>>>>>>>>>>> ---------------------------------------------------------- >>>>>>>>>>>>>> --> WvDial: Internet dialer version 1.60 >>>>>>>>>>>>>> --> Cannot get information for serial port. >>>>>>>>>>>>>> --> Initializing modem. >>>>>>>>>>>>>> --> Sending: ATZ >>>>>>>>>>>>>> ATZ >>>>>>>>>>>>>> OK >>>>>>>>>>>>>> --> Sending: ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=34 >>>>>>>>>>>>>> ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=34 >>>>>>>>>>>>>> OK >>>>>>>>>>>>>> --> Modem initialized. >>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>>> --> No Carrier! ย Trying again. >>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>> --> Timed out while dialing. ย Trying again. >>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>> --> No Carrier! ย Trying again. >>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>> --> No Carrier! ย Trying again. >>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>> --> No Carrier! ย Trying again. >>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> ------------------------------------------------------------------ >>>>>>>>>>>>>> Baud = 57,600 ย ,+MS=90 >>>>>>>>>>>>>> ------------------------------------------------------------------ >>>>>>>>>>>>>> --> WvDial: Internet dialer version 1.60 >>>>>>>>>>>>>> --> Cannot get information for serial port. >>>>>>>>>>>>>> --> Initializing modem. >>>>>>>>>>>>>> --> Sending: ATZ >>>>>>>>>>>>>> ATZ >>>>>>>>>>>>>> OK >>>>>>>>>>>>>> --> Sending: ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90 >>>>>>>>>>>>>> ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90 >>>>>>>>>>>>>> OK >>>>>>>>>>>>>> --> Modem initialized. >>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>>> --> No Carrier! ย Trying again. >>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> ------------------------------------------------ >>>>>>>>>>>>>> Baud = 115,200 ย , +MS=90 >>>>>>>>>>>>>> ------------------------------------------------ >>>>>>>>>>>>>> --> WvDial: Internet dialer version 1.60 >>>>>>>>>>>>>> --> Cannot get information for serial port. >>>>>>>>>>>>>> --> Initializing modem. >>>>>>>>>>>>>> --> Sending: ATZ >>>>>>>>>>>>>> ATZ >>>>>>>>>>>>>> OK >>>>>>>>>>>>>> --> Sending: ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90 >>>>>>>>>>>>>> ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90 >>>>>>>>>>>>>> OK >>>>>>>>>>>>>> --> Modem initialized. >>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>>> --> No Carrier! ย Trying again. >>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> --------------------------------------------------------- >>>>>>>>>>>>>> Baud = 115,200 , ย +MS=34 >>>>>>>>>>>>>> --------------------------------------------------------- >>>>>>>>>>>>>> --> WvDial: Internet dialer version 1.60 >>>>>>>>>>>>>> --> Cannot get information for serial port. >>>>>>>>>>>>>> --> Initializing modem. >>>>>>>>>>>>>> --> Sending: ATZ >>>>>>>>>>>>>> ATZ >>>>>>>>>>>>>> OK >>>>>>>>>>>>>> --> Sending: ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=34 >>>>>>>>>>>>>> ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=34 >>>>>>>>>>>>>> OK >>>>>>>>>>>>>> --> Modem initialized. >>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>>> --> No Carrier! ย Trying again. >>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> ------------------------------------------------------------------ >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>>> Tour, >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Try to modify wvdial.conf from >>>>>>>>>>>>>>> [Dialer Defaults] >>>>>>>>>>>>>>> Modem = /dev/ttySL0 >>>>>>>>>>>>>>> Init1 = ATZ >>>>>>>>>>>>>>> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>>>>>>>>>>>> ;Stupid Mode = 1 >>>>>>>>>>>>>>> Modem Type = Analog Modem >>>>>>>>>>>>>>> Phone = 1222 >>>>>>>>>>>>>>> ISDN = 0 >>>>>>>>>>>>>>> Username = U89$0y)9@xxxxxxxxxxxxx >>>>>>>>>>>>>>> Carrier Check = no >>>>>>>>>>>>>>> Password = ********** ย <--- change this to ***** be >>>>>>>>>>>>>>> careful >>>>>>>>>>>>>>> with >>>>>>>>>>>>>>> passwords others can take advantage when posting to list >>>>>>>>>>>>>>> Baud = 460800 >>>>>>>>>>>>>>> to >>>>>>>>>>>>>>> [Dialer Defaults] >>>>>>>>>>>>>>> Modem = /dev/ttySL0 >>>>>>>>>>>>>>> Init1 = ATZ >>>>>>>>>>>>>>> Init2 = ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90 ย <--- >>>>>>>>>>>>>>> ย add X3 >>>>>>>>>>>>>>> option to >>>>>>>>>>>>>>> skip dialtone checking, and add +MS=90 you may try +MS=34 >>>>>>>>>>>>>>> if >>>>>>>>>>>>>>> +MS=90 >>>>>>>>>>>>>>> does not help you get connected >>>>>>>>>>>>>>> Modem Type = Analog Modem >>>>>>>>>>>>>>> Phone = 1222 >>>>>>>>>>>>>>> Baud = 460800 ย <---- you can also try lower bauds like >>>>>>>>>>>>>>> 115,200 or >>>>>>>>>>>>>>> 57,600 in case it is needed. >>>>>>>>>>>>>>> ISDN = 0 >>>>>>>>>>>>>>> Username = U89$0y)9@xxxxxxxxxxxxx >>>>>>>>>>>>>>> Password = ********** >>>>>>>>>>>>>>> Carrier Check = no >>>>>>>>>>>>>>> Stupid Mode = 1 ย <--- remove the ";", it might help get >>>>>>>>>>>>>>> you >>>>>>>>>>>>>>> connected >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Try that and report back. ย Also, if for any reason you >>>>>>>>>>>>>>> do >>>>>>>>>>>>>>> not >>>>>>>>>>>>>>> get >>>>>>>>>>>>>>> connected, try reading the DOCs/wvdial.txt file. ย In >>>>>>>>>>>>>>> that >>>>>>>>>>>>>>> file it >>>>>>>>>>>>>>> summarizes more of what I am recommending here. ย Also >>>>>>>>>>>>>>> try to >>>>>>>>>>>>>>> create >>>>>>>>>>>>>>> a >>>>>>>>>>>>>>> file that you may send should you fail to get connected. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> ## ย ย To make a logfile wvdial.out >>>>>>>>>>>>>>> $ sudo wvdial 2>&1 | tee wvdial.out >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> and attach wvdial.out to list. ย You may also read up on >>>>>>>>>>>>>>> Jacques' >>>>>>>>>>>>>>> post-install troubleshooting guide/howto : >>>>>>>>>>>>>>> http://linmodems.technion.ac.il/post-install.html >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Regards, >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Antonio >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> 2009/4/24 Patompong Kumdang <u500910052@xxxxxx>: >>>>>>>>>>>>>>>> Hello, >>>>>>>>>>>>>>>> I'm Tour, Thailand >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> I cannot connect to internet by using my internal modem. >>>>>>>>>>>>>>>> I use ubuntu 8.1 ย kernel 2.6.27-10-generic >>>>>>>>>>>>>>>> when I connect, I can hear the dial tone like as connect >>>>>>>>>>>>>>>> by >>>>>>>>>>>>>>>> windows, >>>>>>>>>>>>>>>> But the sound that I hear not the same, It stop sound >>>>>>>>>>>>>>>> later. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> (I guss you ย know that I tell, my english not very >>>>>>>>>>>>>>>> well) >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> this is my wvdial.conf >>>>>>>>>>>>>>>> ------------------------------------------- >>>>>>>>>>>>>>>> root@tourcom-laptop:/home/tourcom# wvdialconf >>>>>>>>>>>>>>>> /etc/wvdial.conf >>>>>>>>>>>>>>>> Editing `/etc/wvdial.conf'. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Scanning your serial ports for a modem. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Modem Port Scan<*1>: S0 ย S1 ย S2 ย S3 >>>>>>>>>>>>>>>> WvModem<*1>: Cannot get information for serial port. >>>>>>>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 -- OK >>>>>>>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 Z -- OK >>>>>>>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 -- OK >>>>>>>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK >>>>>>>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK >>>>>>>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK >>>>>>>>>>>>>>>> ttySL0<*1>: Modem Identifier: ATI -- SmartLink Soft Modem >>>>>>>>>>>>>>>> ttySL0<*1>: Speed 4800: AT -- OK >>>>>>>>>>>>>>>> ttySL0<*1>: Speed 9600: AT -- OK >>>>>>>>>>>>>>>> ttySL0<*1>: Speed 19200: AT -- OK >>>>>>>>>>>>>>>> ttySL0<*1>: Speed 38400: AT -- OK >>>>>>>>>>>>>>>> ttySL0<*1>: Speed 57600: AT -- OK >>>>>>>>>>>>>>>> ttySL0<*1>: Speed 115200: AT -- OK >>>>>>>>>>>>>>>> ttySL0<*1>: Speed 230400: AT -- OK >>>>>>>>>>>>>>>> ttySL0<*1>: Speed 460800: AT -- OK >>>>>>>>>>>>>>>> ttySL0<*1>: Max speed is 460800; that should be safe. >>>>>>>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Found a modem on /dev/ttySL0. >>>>>>>>>>>>>>>> Modem configuration written to /etc/wvdial.conf. >>>>>>>>>>>>>>>> ttySL0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 >>>>>>>>>>>>>>>> +FCLASS=0" >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> this is the script when I connect >>>>>>>>>>>>>>>> ---------------------------------------------------------- >>>>>>>>>>>>>>>> Script started on Sat 25 Apr 2009 09:48:30 AM ICT >>>>>>>>>>>>>>>> ย ]0;root@tourcom-laptop: /home/tourcom >>>>>>>>>>>>>>>> root@tourcom-laptop:/home/tourcom# >>>>>>>>>>>>>>>> wvdial >>>>>>>>>>>>>>>> --> WvDial: Internet dialer version 1.60 >>>>>>>>>>>>>>>> --> Cannot get information for serial port. >>>>>>>>>>>>>>>> --> Initializing modem. >>>>>>>>>>>>>>>> --> Sending: ATZ >>>>>>>>>>>>>>>> ATZ >>>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>>> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>>>>>>>>>>>>> ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>>> --> Modem initialized. >>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>>>>> --> No Carrier! ย Trying again. >>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>> ^CCaught signal 2: ย Attempting to exit gracefully... >>>>>>>>>>>>>>>> --> Disconnecting at Sat Apr 25 09:49:42 2009 >>>>>>>>>>>>>>>> ย ]0;root@tourcom-laptop: /home/tourcom >>>>>>>>>>>>>>>> root@tourcom-laptop:/home/tourcom# >>>>>>>>>>>>>>>> exit >>>>>>>>>>>>>>>> exit >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Script done on Sat 25 Apr 2009 09:49:45 AM ICT >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> this is my wvdial.conf file >>>>>>>>>>>>>>>> ------------------------------------- >>>>>>>>>>>>>>>> [Dialer Defaults] >>>>>>>>>>>>>>>> Modem = /dev/ttySL0 >>>>>>>>>>>>>>>> Init1 = ATZ >>>>>>>>>>>>>>>> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>>>>>>>>>>>>> ;Stupid Mode = 1 >>>>>>>>>>>>>>>> Modem Type = Analog Modem >>>>>>>>>>>>>>>> Phone = 1222 >>>>>>>>>>>>>>>> ISDN = 0 >>>>>>>>>>>>>>>> Username = U89$0y)9@xxxxxxxxxxxxx >>>>>>>>>>>>>>>> Carrier Check = no >>>>>>>>>>>>>>>> Password = j4**9c+p >>>>>>>>>>>>>>>> Baud = 460800 >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> <div><br></div> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> <div><br></div> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> <div><br></div> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>>> >>> >>> >> >> >> > >
