Tour, I looked back at your ModemData.txt sent a few days ago, it does not agree with output from scanModem :(, http://www.nabble.com/Please-help-me-to-set-up-my-modem-to23204381.html In the scanModem that you sent the alsa version is 1.0.19, and with the output messages that you sent it is 1.0.16 : Apr 24 16:19:38 tourcom-laptop kernel: [ 731.524013] ALSA /usr/src/modules/alsa/alsa-driver-1.0.16/pci/hda/hda_intel.c:634: hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x10490000 would you mind sending ModemData.txt again, re run scanModem and send it back to list. It is hard to troubleshoot with too many things going on. Regards, Antonio On 4/26/09, Antonio Olivares <olivares14031@xxxxxxxxx> wrote: > Tour, > > I see too many interfaces interfering with your connection(s). > > Apr 25 17:31:34 tourcom-laptop kernel: [ 231.792507] PPP generic > driver version 2.4.2 > Apr 25 17:31:34 tourcom-laptop pppd[6494]: pppd 2.4.4 started by root, uid > 0 > Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (BUSY) > Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (NO CARRIER) > Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (VOICE) > Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (NO DIALTONE) > Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (NO DIAL TONE) > Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (NO ANSWER) > Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (DELAYED) > Apr 25 17:31:35 tourcom-laptop chat[6499]: send (ATZ^M) > Apr 25 17:31:35 tourcom-laptop chat[6499]: expect (OK) > Apr 25 17:31:35 tourcom-laptop chat[6499]: ATZ^M^M > Apr 25 17:31:35 tourcom-laptop chat[6499]: OK > Apr 25 17:31:35 tourcom-laptop chat[6499]: -- got it > Apr 25 17:31:35 tourcom-laptop chat[6499]: send (ATDT#99^M) > Apr 25 17:31:35 tourcom-laptop chat[6499]: expect (CONNECT) > Apr 25 17:31:35 tourcom-laptop chat[6499]: ^M > Apr 25 17:31:38 tourcom-laptop chat[6499]: ATDT#99^M^M > Apr 25 17:31:38 tourcom-laptop chat[6499]: NO CARRIER > Apr 25 17:31:38 tourcom-laptop chat[6499]: -- failed > Apr 25 17:31:38 tourcom-laptop chat[6499]: Failed (NO CARRIER) > Apr 25 17:31:39 tourcom-laptop pppd[6494]: Exit. > Apr 25 17:35:17 tourcom-laptop pppd[6536]: pppd 2.4.4 started by root, uid > 0 > Apr 25 17:35:17 tourcom-laptop pppd[6536]: Using interface ppp0 > Apr 25 17:35:17 tourcom-laptop pppd[6536]: Connect: ppp0 <--> /dev/ttyACM0 > Apr 25 17:35:36 tourcom-laptop pppd[6536]: Serial line is looped back. > Apr 25 17:35:36 tourcom-laptop pppd[6536]: Connection terminated. > Apr 25 17:35:36 tourcom-laptop pppd[6536]: Exit. > Apr 25 17:37:38 tourcom-laptop pppd[6563]: pppd 2.4.4 started by root, uid > 0 > Apr 25 17:37:38 tourcom-laptop pppd[6563]: Using interface ppp0 > Apr 25 17:37:38 tourcom-laptop pppd[6563]: Connect: ppp0 <--> /dev/ttyACM0 > Apr 25 17:37:56 tourcom-laptop pppd[6563]: Serial line is looped back. > Apr 25 17:37:56 tourcom-laptop pppd[6563]: Connection terminated. > Apr 25 17:37:56 tourcom-laptop pppd[6563]: Exit. > Apr 25 17:39:19 tourcom-laptop pppd[6583]: pppd 2.4.4 started by root, uid > 0 > Apr 25 17:39:19 tourcom-laptop pppd[6583]: Using interface ppp0 > Apr 25 17:39:19 tourcom-laptop pppd[6583]: Connect: ppp0 <--> /dev/ttyACM0 > Apr 25 17:39:24 tourcom-laptop pppd[6583]: PAP authentication succeeded > Apr 25 17:39:24 tourcom-laptop kernel: [ 701.755111] PPP BSD > Compression module registered > Apr 25 17:39:24 tourcom-laptop kernel: [ 701.833370] PPP Deflate > Compression module registered > Apr 25 17:39:39 tourcom-laptop pppd[6583]: local IP address 10.174.152.18 > Apr 25 17:39:39 tourcom-laptop pppd[6583]: remote IP address 10.1.1.1 > Apr 25 17:39:39 tourcom-laptop pppd[6583]: primary DNS address > 203.146.237.237 > Apr 25 17:39:39 tourcom-laptop pppd[6583]: secondary DNS address > 202.149.24.5 > Apr 25 17:42:07 tourcom-laptop pppd[6583]: Terminating on signal 15 > Apr 25 17:42:07 tourcom-laptop pppd[6583]: Connect time 2.5 minutes. > Apr 25 17:42:07 tourcom-laptop pppd[6583]: Sent 68036 bytes, received > 263473 bytes. > Apr 25 17:42:07 tourcom-laptop pppd[6583]: Connection terminated. > Apr 25 17:42:07 tourcom-laptop pppd[6583]: Exit. > Apr 25 17:42:15 tourcom-laptop kernel: [ 873.128154] usb 2-2: USB > disconnect, address 2 > > Here above shows that you apparently used a USB modem with device > /dev/ttyACM0 > that has nothing to do with the device that you apparently need to use > /dev/ttySL0 > > > Apr 24 22:05:24 tourcom-laptop pppd[6415]: pppd 2.4.4 started by root, uid > 0 > Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (BUSY) > Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (NO CARRIER) > Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (VOICE) > Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (NO DIALTONE) > Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (NO DIAL TONE) > Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (NO ANSWER) > Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (DELAYED) > Apr 24 22:05:25 tourcom-laptop chat[6420]: send (ATZ^M) > Apr 24 22:05:25 tourcom-laptop chat[6420]: expect (OK) > Apr 24 22:05:25 tourcom-laptop chat[6420]: ^M^M^MATZ^M^M > Apr 24 22:05:25 tourcom-laptop chat[6420]: OK > Apr 24 22:05:25 tourcom-laptop chat[6420]: -- got it > Apr 24 22:05:25 tourcom-laptop chat[6420]: send (ATDT1222^M) > Apr 24 22:05:25 tourcom-laptop chat[6420]: expect (CONNECT) > Apr 24 22:05:25 tourcom-laptop chat[6420]: ^M > Apr 24 22:05:25 tourcom-laptop chat[6420]: ATDT1222^M^M > Apr 24 22:06:03 tourcom-laptop chat[6420]: NO CARRIER > Apr 24 22:06:03 tourcom-laptop chat[6420]: -- failed > Apr 24 22:06:03 tourcom-laptop chat[6420]: Failed (NO CARRIER) > Apr 24 22:06:04 tourcom-laptop pppd[6415]: Exit. > Apr 24 22:07:13 tourcom-laptop kernel: [ 380.500015] ALSA > /usr/src/modules/alsa/alsa-driver-1.0.16/pci/hda/hda_intel.c:634: > hda_intel: azx_get_response timeout, switching to polling mode: last > cmd=0x10490000 > Apr 24 22:07:51 tourcom-laptop pppd[6443]: pppd 2.4.4 started by root, uid > 0 > Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (BUSY) > Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (NO CARRIER) > Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (VOICE) > Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (NO DIALTONE) > Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (NO DIAL TONE) > Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (NO ANSWER) > Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (DELAYED) > Apr 24 22:07:52 tourcom-laptop chat[6445]: send (ATZ^M) > Apr 24 22:07:52 tourcom-laptop chat[6445]: expect (OK) > Apr 24 22:07:52 tourcom-laptop chat[6445]: ^M^M^MATZ^M^M > Apr 24 22:07:52 tourcom-laptop chat[6445]: OK > Apr 24 22:07:52 tourcom-laptop chat[6445]: -- got it > Apr 24 22:07:52 tourcom-laptop chat[6445]: send (ATDT1222^M) > Apr 24 22:07:52 tourcom-laptop chat[6445]: expect (CONNECT) > Apr 24 22:07:52 tourcom-laptop chat[6445]: ^M > Apr 24 22:07:52 tourcom-laptop chat[6445]: ATDT1222^M^M > Apr 24 22:08:30 tourcom-laptop chat[6445]: NO CARRIER > Apr 24 22:08:30 tourcom-laptop chat[6445]: -- failed > Apr 24 22:08:30 tourcom-laptop chat[6445]: Failed (NO CARRIER) > Apr 24 22:08:31 tourcom-laptop pppd[6443]: Exit. > > Here wlan0 is another interface that is not needed when you are trying > to connect with dialup. > It needs to be shut off to troubleshoot the dialup connection. > > $ sudo ifconfig wlan0 down > and all others too like eth0, eth1 etc. > > > Apr 20 14:45:17 tourcom-laptop kernel: [ 22.526400] wlan0: ethernet > device 00:16:cf:73:b1:97 using serialized NDIS driver: net5211, > version: 0x40002, NDIS version: 0x501, vendor: 'NDIS Network Adapter', > 168C:001A.5.conf > Apr 20 14:45:17 tourcom-laptop kernel: [ 22.543385] acer-wmi: Acer > Laptop ACPI-WMI Extras > Apr 20 14:45:17 tourcom-laptop kernel: [ 22.568075] wlan0: > encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; > AES/CCMP with WPA, WPA2, WPA2PSK > > > What is this ? > > Apr 20 14:45:38 tourcom-laptop kernel: [ 51.034653] Intel537: > disagrees about version of symbol struct_module > Apr 20 14:45:38 tourcom-laptop kernel: [ 51.081436] Intel537: > disagrees about version of symbol struct_module > > Intel537 modem?? too, Did not see that one when you sent > ModemData.txt first. > > > Apr 20 14:45:40 tourcom-laptop kernel: [ 53.644280] sky2 eth0: > enabling interface > Apr 20 14:45:40 tourcom-laptop kernel: [ 53.647244] > ADDRCONF(NETDEV_UP): eth0: link is not ready > Apr 20 14:45:42 tourcom-laptop kernel: [ 55.293253] sky2 eth0: Link > is up at 100 Mbps, full duplex, flow control both > > > Apr 20 18:23:18 tourcom-laptop kernel: [ 1837.606047] sky2 eth0: Link is > down. > Apr 20 18:23:20 tourcom-laptop kernel: [ 1839.206504] sky2 eth0: Link > is up at 100 Mbps, full duplex, flow control both > Apr 20 18:23:26 tourcom-laptop kernel: [ 1845.688796] sky2 eth0: Link is > down. > Apr 20 18:23:52 tourcom-laptop kernel: [ 1871.418303] sky2 eth0: Link > is up at 100 Mbps, full duplex, flow control both > Apr 20 18:34:19 tourcom-laptop kernel: [ 2498.381516] device eth0 left > promiscuous mode > > Try one thing at a time. You are trying to do too much. If you want > to connect with slmodemd use that and that only. When attempting to > connect, open a terminal and type > $ sudo tail -f /var/log/messages > > send only the parts when the connection is taking place and when it fails. > > Regards, > > Antonio > > On 4/26/09, Patompong Kumdang <u500910052@xxxxxx> wrote: >> Hello, >> I heve sent this log file to you. >> >> Thank you. >> >> Tour. >> >> >> >> >> >>> Tour, >>> >>> Could you try to make a log file of your session >>> >>> $ sudo wvdial 2>&1 | tee wvdial.out >>> >>> send wvdial.out to us(list) >>> >>> and attach output of >>> $ sudo tail -f var/log/messages >>> >>> Report back presently. >>> >>> Regards, >>> >>> Antonio >>> >>> 2009/4/25 Patompong Kumdang <u500910052@xxxxxx>: >>>> Antonio, >>>> >>>> I don't know about how to choose driver to in stall, >>>> I follow the step that Marv suggest. >>>> My username and password is a free account in my country.(it's safe ) >>>> In windows I don't use a special command. >>>> Now, I guess my modem can't sent signal to server. >>>> Do you listen the file that I sent to you. >>> >>> Yes, I get typically the same sound when I dialup too! >>>> >>>> Thank you very much :) >>>> >>>> >>>> Tour. >>>> >>>> >>>>> TouR, Marv >>>>> >>>>> I don't know if this will make a difference, but since your using >>>>> precompiled SLMODEMD with ALSA support, your alsa version is 1.0.19 >>>>> and there does not exist a 1.0.19 SLMODEMD.gcc4.3_alsa1.0.19.tar.gz. >>>>> Marv will it make a difference if he needs a gcc4.3_alsa1.0.19 >>>>> SLMODEMD? He is having difficulties getting connected to internet. >>>>> This email sent to Marv, and Jacques not to list so your username and >>>>> password will be safe! >>>>> >>>>> TouR, >>>>> my wvdial.conf file looks this way: >>>>> [olivares@localhost ~]$ cat /etc/wvdial.conf >>>>> >>>>> [Dialer Defaults] >>>>> Init2 = ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90 >>>>> Modem Type = Analog Modem >>>>> Phone = 7072000 >>>>> ISDN = 0 >>>>> Username = myusername >>>>> Init1 = ATZ >>>>> Password = ************ >>>>> Modem = /dev/ttySL0 >>>>> Baud = 460800 >>>>> Carrier Check = No >>>>> Stupid Mode = 1 >>>>> >>>>> A SLMODEMD with alsa 1.0.19 might be his best bet? Don't know if this >>>>> makes a difference, but why not ask? >>>>> >>>>> http://linmodems.technion.ac.il/packages/smartlink/ >>>>> >>>>> Here's your wvdial.con >>>>> this is my wvdial.conf file >>>>> ------------------------------------- >>>>> [Dialer Defaults] >>>>> Modem = /dev/ttySL0 >>>>> Init1 = ATZ >>>>> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>> ;Stupid Mode = 1 >>>>> Modem Type = Analog Modem >>>>> Phone = 1222 >>>>> ISDN = 0 >>>>> Username = U89$0y)9@xxxxxxxxxxxxx >>>>> Carrier Check = no >>>>> Password = j4**9c+p >>>>> Baud = 460800 >>>>> >>>>> Jacques, is a username allow characters like ")" in wvdial.conf ? >>>>> U89$0y)9@xxxxxxxxxxxxx ? >>>>> >>>>> I am looking for what your ISP requires, but can't seem to find >>>>> anything. >>>>> >>>>> http://www.tot.co.th/toten/index.php?option=com_content&task=view&id=363&Itemid=1121 >>>>> >>>>> >>>>> TouR >>>>> Do you use any special commands or strings to connect via windows? >>>>> It is strange that the connection can't seem to get through? >>>>> >>>>> 2009/4/25 Patompong Kumdang <u500910052@xxxxxx>: >>>>>> >>>>>> Antonio, >>>>>> >>>>>> Thanks. for your help. :) >>>>>> >>>>>> I try to modify wvdial.conf, But it has the same problem. >>>>>> I attach file that contain the sound that I hear when connect >>>>>> using ubuntu (001.wav) and using windows (003.wav)(windows can >>>>>> connect) >>>>>> I guess my modem can't sent information to server? >>>>>> >>>>>> and this is my log file >>>>>> >>>>>> >>>>>> ---------------------------------------------------------- >>>>>> Baud = 57,600 , +MS=34 >>>>>> ---------------------------------------------------------- >>>>>> --> WvDial: Internet dialer version 1.60 >>>>>> --> Cannot get information for serial port. >>>>>> --> Initializing modem. >>>>>> --> Sending: ATZ >>>>>> ATZ >>>>>> OK >>>>>> --> Sending: ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=34 >>>>>> ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=34 >>>>>> OK >>>>>> --> Modem initialized. >>>>>> --> Sending: ATDT1222 >>>>>> --> Waiting for carrier. >>>>>> ATDT1222 >>>>>> NO CARRIER >>>>>> --> No Carrier! Trying again. >>>>>> --> Sending: ATDT1222 >>>>>> --> Waiting for carrier. >>>>>> ATDT1222 >>>>>> --> Timed out while dialing. Trying again. >>>>>> --> Sending: ATDT1222 >>>>>> --> Waiting for carrier. >>>>>> NO CARRIER >>>>>> ATDT1222 >>>>>> --> No Carrier! Trying again. >>>>>> --> Sending: ATDT1222 >>>>>> --> Waiting for carrier. >>>>>> NO CARRIER >>>>>> ATDT1222 >>>>>> --> No Carrier! Trying again. >>>>>> --> Sending: ATDT1222 >>>>>> --> Waiting for carrier. >>>>>> NO CARRIER >>>>>> ATDT1222 >>>>>> --> No Carrier! Trying again. >>>>>> --> Sending: ATDT1222 >>>>>> --> Waiting for carrier. >>>>>> NO CARRIER >>>>>> >>>>>> >>>>>> ------------------------------------------------------------------ >>>>>> Baud = 57,600 ,+MS=90 >>>>>> ------------------------------------------------------------------ >>>>>> --> WvDial: Internet dialer version 1.60 >>>>>> --> Cannot get information for serial port. >>>>>> --> Initializing modem. >>>>>> --> Sending: ATZ >>>>>> ATZ >>>>>> OK >>>>>> --> Sending: ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90 >>>>>> ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90 >>>>>> OK >>>>>> --> Modem initialized. >>>>>> --> Sending: ATDT1222 >>>>>> --> Waiting for carrier. >>>>>> ATDT1222 >>>>>> NO CARRIER >>>>>> --> No Carrier! Trying again. >>>>>> --> Sending: ATDT1222 >>>>>> --> Waiting for carrier. >>>>>> ATDT1222 >>>>>> >>>>>> >>>>>> ------------------------------------------------ >>>>>> Baud = 115,200 , +MS=90 >>>>>> ------------------------------------------------ >>>>>> --> WvDial: Internet dialer version 1.60 >>>>>> --> Cannot get information for serial port. >>>>>> --> Initializing modem. >>>>>> --> Sending: ATZ >>>>>> ATZ >>>>>> OK >>>>>> --> Sending: ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90 >>>>>> ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90 >>>>>> OK >>>>>> --> Modem initialized. >>>>>> --> Sending: ATDT1222 >>>>>> --> Waiting for carrier. >>>>>> ATDT1222 >>>>>> NO CARRIER >>>>>> --> No Carrier! Trying again. >>>>>> --> Sending: ATDT1222 >>>>>> --> Waiting for carrier. >>>>>> ATDT1222 >>>>>> >>>>>> >>>>>> >>>>>> --------------------------------------------------------- >>>>>> Baud = 115,200 , +MS=34 >>>>>> --------------------------------------------------------- >>>>>> --> WvDial: Internet dialer version 1.60 >>>>>> --> Cannot get information for serial port. >>>>>> --> Initializing modem. >>>>>> --> Sending: ATZ >>>>>> ATZ >>>>>> OK >>>>>> --> Sending: ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=34 >>>>>> ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=34 >>>>>> OK >>>>>> --> Modem initialized. >>>>>> --> Sending: ATDT1222 >>>>>> --> Waiting for carrier. >>>>>> ATDT1222 >>>>>> NO CARRIER >>>>>> --> No Carrier! Trying again. >>>>>> --> Sending: ATDT1222 >>>>>> --> Waiting for carrier. >>>>>> ATDT1222 >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> ------------------------------------------------------------------ >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>>> Tour, >>>>>>> >>>>>>> Try to modify wvdial.conf from >>>>>>> [Dialer Defaults] >>>>>>> Modem = /dev/ttySL0 >>>>>>> Init1 = ATZ >>>>>>> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>>>> ;Stupid Mode = 1 >>>>>>> Modem Type = Analog Modem >>>>>>> Phone = 1222 >>>>>>> ISDN = 0 >>>>>>> Username = U89$0y)9@xxxxxxxxxxxxx >>>>>>> Carrier Check = no >>>>>>> Password = ********** <--- change this to ***** be careful with >>>>>>> passwords others can take advantage when posting to list >>>>>>> Baud = 460800 >>>>>>> to >>>>>>> [Dialer Defaults] >>>>>>> Modem = /dev/ttySL0 >>>>>>> Init1 = ATZ >>>>>>> Init2 = ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90 <--- add X3 option to >>>>>>> skip dialtone checking, and add +MS=90 you may try +MS=34 if +MS=90 >>>>>>> does not help you get connected >>>>>>> Modem Type = Analog Modem >>>>>>> Phone = 1222 >>>>>>> Baud = 460800 <---- you can also try lower bauds like 115,200 or >>>>>>> 57,600 in case it is needed. >>>>>>> ISDN = 0 >>>>>>> Username = U89$0y)9@xxxxxxxxxxxxx >>>>>>> Password = ********** >>>>>>> Carrier Check = no >>>>>>> Stupid Mode = 1 <--- remove the ";", it might help get you >>>>>>> connected >>>>>>> >>>>>>> Try that and report back. Also, if for any reason you do not get >>>>>>> connected, try reading the DOCs/wvdial.txt file. In that file it >>>>>>> summarizes more of what I am recommending here. Also try to create >>>>>>> a >>>>>>> file that you may send should you fail to get connected. >>>>>>> >>>>>>> ## To make a logfile wvdial.out >>>>>>> $ sudo wvdial 2>&1 | tee wvdial.out >>>>>>> >>>>>>> and attach wvdial.out to list. You may also read up on Jacques' >>>>>>> post-install troubleshooting guide/howto : >>>>>>> http://linmodems.technion.ac.il/post-install.html >>>>>>> >>>>>>> Regards, >>>>>>> >>>>>>> Antonio >>>>>>> >>>>>>> >>>>>>> >>>>>>> 2009/4/24 Patompong Kumdang <u500910052@xxxxxx>: >>>>>>>> Hello, >>>>>>>> I'm Tour, Thailand >>>>>>>> >>>>>>>> I cannot connect to internet by using my internal modem. >>>>>>>> I use ubuntu 8.1 kernel 2.6.27-10-generic >>>>>>>> when I connect, I can hear the dial tone like as connect by >>>>>>>> windows, >>>>>>>> But the sound that I hear not the same, It stop sound later. >>>>>>>> >>>>>>>> (I guss you know that I tell, my english not very well) >>>>>>>> >>>>>>>> >>>>>>>> this is my wvdial.conf >>>>>>>> ------------------------------------------- >>>>>>>> root@tourcom-laptop:/home/tourcom# wvdialconf /etc/wvdial.conf >>>>>>>> Editing `/etc/wvdial.conf'. >>>>>>>> >>>>>>>> Scanning your serial ports for a modem. >>>>>>>> >>>>>>>> Modem Port Scan<*1>: S0 S1 S2 S3 >>>>>>>> WvModem<*1>: Cannot get information for serial port. >>>>>>>> ttySL0<*1>: ATQ0 V1 E1 -- OK >>>>>>>> ttySL0<*1>: ATQ0 V1 E1 Z -- OK >>>>>>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 -- OK >>>>>>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK >>>>>>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK >>>>>>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK >>>>>>>> ttySL0<*1>: Modem Identifier: ATI -- SmartLink Soft Modem >>>>>>>> ttySL0<*1>: Speed 4800: AT -- OK >>>>>>>> ttySL0<*1>: Speed 9600: AT -- OK >>>>>>>> ttySL0<*1>: Speed 19200: AT -- OK >>>>>>>> ttySL0<*1>: Speed 38400: AT -- OK >>>>>>>> ttySL0<*1>: Speed 57600: AT -- OK >>>>>>>> ttySL0<*1>: Speed 115200: AT -- OK >>>>>>>> ttySL0<*1>: Speed 230400: AT -- OK >>>>>>>> ttySL0<*1>: Speed 460800: AT -- OK >>>>>>>> ttySL0<*1>: Max speed is 460800; that should be safe. >>>>>>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK >>>>>>>> >>>>>>>> Found a modem on /dev/ttySL0. >>>>>>>> Modem configuration written to /etc/wvdial.conf. >>>>>>>> ttySL0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 >>>>>>>> +FCLASS=0" >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> this is the script when I connect >>>>>>>> ---------------------------------------------------------- >>>>>>>> Script started on Sat 25 Apr 2009 09:48:30 AM ICT >>>>>>>> ]0;root@tourcom-laptop: /home/tourcom >>>>>>>> root@tourcom-laptop:/home/tourcom# >>>>>>>> wvdial >>>>>>>> --> WvDial: Internet dialer version 1.60 >>>>>>>> --> Cannot get information for serial port. >>>>>>>> --> Initializing modem. >>>>>>>> --> Sending: ATZ >>>>>>>> ATZ >>>>>>>> OK >>>>>>>> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>>>>> ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>>>>> OK >>>>>>>> --> Modem initialized. >>>>>>>> --> Sending: ATDT1222 >>>>>>>> --> Waiting for carrier. >>>>>>>> ATDT1222 >>>>>>>> NO CARRIER >>>>>>>> --> No Carrier! Trying again. >>>>>>>> --> Sending: ATDT1222 >>>>>>>> --> Waiting for carrier. >>>>>>>> ATDT1222 >>>>>>>> ^CCaught signal 2: Attempting to exit gracefully... >>>>>>>> --> Disconnecting at Sat Apr 25 09:49:42 2009 >>>>>>>> ]0;root@tourcom-laptop: /home/tourcom >>>>>>>> root@tourcom-laptop:/home/tourcom# >>>>>>>> exit >>>>>>>> exit >>>>>>>> >>>>>>>> Script done on Sat 25 Apr 2009 09:49:45 AM ICT >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> this is my wvdial.conf file >>>>>>>> ------------------------------------- >>>>>>>> [Dialer Defaults] >>>>>>>> Modem = /dev/ttySL0 >>>>>>>> Init1 = ATZ >>>>>>>> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>>>>> ;Stupid Mode = 1 >>>>>>>> Modem Type = Analog Modem >>>>>>>> Phone = 1222 >>>>>>>> ISDN = 0 >>>>>>>> Username = U89$0y)9@xxxxxxxxxxxxx >>>>>>>> Carrier Check = no >>>>>>>> Password = j4**9c+p >>>>>>>> Baud = 460800 >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>>> <div><br></div> >>>>>>> >>>>>>> >>>>>> >>>>> >>>>> <div><br></div> >>>>> >>>>> >>>> >>>> >>>> >>> >>> <div><br></div> >>> >>> >> >
