List, Would any of you with the Agere 0x11c13026 modem chip, hosted on a High Definition Audio (HDA)card please report in. What are the specifics of HDA card, kernel and do you have modem functionality. Marv S 2009/4/27 Patompong Kumdang <u500910052@xxxxxx>: > Antonio, MarvS > > Can I try another way to connect to internet. > > Tour. > > > >> The MS drivers provide no additional useful information, beyond that >> of the ModemData.txt >> More this evening. >> >> MarvS >> >> 2009/4/27 Patompong Kumdang <u500910052@xxxxxx>: >>> Antonio, MarvS >>> >>> Sorry, ftp://u500910052@xxxxxxxxxxx/public_html/Modem.zip is broken. >>> >>> Please use this link to download again. >>> http://mail.cm.edu/~u500910052/Modem.zip >>> >>> Thanks, >>> Tour. >>> >>> >>> >>> >>>> Antonio, MarvS >>>> >>>> Can this windows driver tell you more information about my modem. >>>> please download these file at: >>>> ftp://u500910052@xxxxxxxxxxx/public_html/Modem.zip >>>> (sorry, my mail can not sent .zip file) >>>> >>>> Thanks, >>>> Tour. >>>> >>>> >>>> >>>>> Antonio >>>>> >>>>> "The ALSA verion is 1.0.19" output from the scanModem script is from a >>>>> call: >>>>> ย ย aplay --version >>>>> and this is typically matched with other ALSA components of an >>>>> installation. >>>>> >>>>> On the Ubuntu Jaunty I just upgraded to: >>>>> ย ย ย aplay --version >>>>> aplay: version 1.0.18 by Jaroslav Kysela <perex@xxxxxxxx> >>>>> So if is indeed puzzling as to why TouRs is 1.0.19 >>>>> >>>>> TourR, >>>>> ย ย Have you done any cogent alternations to your System. >>>>> >>>>> MarvS >>>>> >>>>> >>>>> On Sun, Apr 26, 2009 at 10:05 PM, Antonio Olivares >>>>> <olivares14031@xxxxxxxxx> wrote: >>>>>> Tour and Marv, >>>>>> >>>>>> I am trying to follow this carefully seeing where I can help, I see a >>>>>> problem here and I do not know why this is happening? >>>>>> >>>>>> /usr/src/modules/alsa/alsa-driver-1.0.16/pci/hda/hda_intel.c:634: >>>>>> เธขย hda_intel: azx_get_response timeout, switching to polling mode: >>>>>> last >>>>>> เธขย cmd=0x10490000 >>>>>> >>>>>> With the old ModemData.txt and the new one just sent, the alsa >>>>>> version >>>>>> is 1.0.19. เธขย This does not make sense. >>>>>> >>>>>> ===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== >>>>>> The ALSA packages provide audio support and also drivers for some >>>>>> modems. >>>>>> ALSA diagnostics are written during bootup to /proc/asound/ folders. >>>>>> >>>>>> The ALSA verion is 1.0.19 >>>>>> The modem cards detected by "aplay -l" เธขย are: >>>>>> card 0: Intel [HDA Intel], device 6: Si3054 Modem [Si3054 Modem] >>>>>> >>>>>> The /proc/asound/pcm file reports: >>>>>> ----------------------- >>>>>> 00-00: ALC883 Analog : ALC883 Analog : playback 1 : capture 1 >>>>>> 00-01: ALC883 Digital : ALC883 Digital : playback 1 >>>>>> 00-02: ALC883 Analog : ALC883 Analog : capture 1 >>>>>> 00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1 >>>>>> >>>>>> about /proc/asound/cards: >>>>>> ------------------------ >>>>>> เธขย 0 [Intel เธขย เธขย เธขย เธขย เธขย ]: HDA-Intel - HDA Intel >>>>>> เธขย เธขย เธขย เธขย เธขย เธขย เธขย เธขย เธขย เธขย เธขย HDA >>>>>> Intel at 0xd0340000 irq 22 >>>>>> >>>>>> เธขย PCI slot 00:1b.0 has a High Definition Audio Card >>>>>> เธขย The drivers are in the kernel modules tree at: >>>>>> เธขย /lib/modules/2.6.27-10-generic/kernel/sound/pci/hda/snd-hda-intel.ko >>>>>> /lib/modules/2.6.27-11-generic/kernel/sound/pci/hda/snd-hda-intel.ko >>>>>> /lib/modules/2.6.27-11-server/kernel/sound/pci/hda/snd-hda-intel.ko >>>>>> เธขย The modem codec file for the HDA card is: >>>>>> /proc/asound/card0/codec#1 >>>>>> >>>>>> >>>>>> I am thinking also since the alsa-version is 1.0.19, shouldn't the >>>>>> precompiled SLMODEMD.gcc4.3.tar.gz serve, a new one with >>>>>> -alsa-1.0.19.tar.gz probably needs to be created? >>>>>> >>>>>> My $0.02 >>>>>> >>>>>> Regards, >>>>>> >>>>>> Antonio >>>>>> >>>>>> On 4/27/09, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> wrote: >>>>>>> Tour >>>>>>> >>>>>>> For the Intel537 do: >>>>>>> >>>>>>> $ find /lib/modules --name Intel537*.ko >>>>>>> and delete any modules found. >>>>>>> >>>>>>> There may also be residual Intel537 files like: >>>>>>> เธขย เธขย เธขย /etc/init.d/537_boot >>>>>>> เธขย เธขย เธขย /etc/hamregistry.bin >>>>>>> เธขย เธขย เธขย /usr/sbin/usrsound >>>>>>> เธขย เธขย เธขย /usr/sbin/hamregistry >>>>>>> that should be removed. >>>>>>> >>>>>>> MarvS >>>>>>> >>>>>>> 2009/4/26 Patompong Kumdang <u500910052@xxxxxx>: >>>>>>>> hello, >>>>>>>> This time I will tell you more information about my computer. >>>>>>>> >>>>>>>>>>>Here above shows that you apparently used a USB modem with >>>>>>>>>>> >>>device >>>>>>>> /dev/ttyACM0 >>>>>>>>>>>that has nothing to do with the device that you apparently need >>>>>>>>>>> to >>>>>>>>>>> use >>>>>>>>>>>/dev/ttySL0 >>>>>>>> I use mobile phone to connect to internet last week. (It can >>>>>>>> connect) >>>>>>>> >>>>>>>> >>>>>>>>>>>Here wlan0 is another interface that is not needed when you are >>>>>>>>>>> trying >>>>>>>>>>>to connect with dialup. >>>>>>>>>>>It needs to be shut off to troubleshoot the dialup connection. >>>>>>>> I have wireless modem and lan card too, but I not use at this time. >>>>>>>> >>>>>>>> >>>>>>>>>>>What is this ? >>>>>>>>>>>Apr 20 14:45:38 tourcom-laptop kernel: [ เธขย 51.034653] >>>>>>>>>>> Intel537: >>>>>>>>>>>disagrees about version of symbol struct_module >>>>>>>>>>>Apr 20 14:45:38 tourcom-laptop kernel: [ เธขย 51.081436] >>>>>>>>>>> Intel537: >>>>>>>>>>>disagrees about version of symbol struct_module >>>>>>>> I don't know about this driver. >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>>>>there seems to be an Intel537 driver on your system from some >>>>>>>>>>> previous >>>>>>>> attempt, >>>>>>>>>>>which may be interfering. >>>>>>>>>>>Please uninstall/delete this driver from your System. >>>>>>>> I don't know how to remove this driver. >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>>>>When attempting to >>>>>>>>>>>connect, open a terminal and type >>>>>>>>>>>$ sudo tail -f /var/log/messages >>>>>>>> I have got this message >>>>>>>> >>>>>>>> root@tourcom-laptop:/home/tourcom# sudo tail -f /var/log/messages >>>>>>>> >>>>>>>> Apr 27 07:19:32 tourcom-laptop kernel: [ เธขย 53.691210] [drm] >>>>>>>> Initialized >>>>>>>> drm 1.1.0 20060810 >>>>>>>> Apr 27 07:19:32 tourcom-laptop kernel: [ เธขย 53.698167] pci >>>>>>>> 0000:00:02.0: >>>>>>>> PCI INT A -> GSI 16 (level, low) -> IRQ 16 >>>>>>>> Apr 27 07:19:32 tourcom-laptop kernel: [ เธขย 53.699489] [drm] >>>>>>>> Initialized >>>>>>>> i915 1.6.0 20060119 on minor 0 >>>>>>>> Apr 27 07:19:33 tourcom-laptop kernel: [ เธขย 54.444472] sky2 >>>>>>>> eth0: >>>>>>>> enabling >>>>>>>> interface >>>>>>>> Apr 27 07:19:33 tourcom-laptop kernel: [ เธขย 54.447579] >>>>>>>> ADDRCONF(NETDEV_UP): >>>>>>>> eth0: link is not ready >>>>>>>> Apr 27 07:19:37 tourcom-laptop pulseaudio[6044]: ltdl-bind-now.c: >>>>>>>> Failed >>>>>>>> to find original dlopen loader. >>>>>>>> Apr 27 07:19:37 tourcom-laptop pulseaudio[6047]: main.c: >>>>>>>> setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted >>>>>>>> Apr 27 07:19:37 tourcom-laptop pulseaudio[6047]: main.c: >>>>>>>> setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted >>>>>>>> Apr 27 07:27:37 tourcom-laptop kernel: [ เธขย 538.346544] sky2 >>>>>>>> eth0: >>>>>>>> disabling >>>>>>>> interface >>>>>>>> Apr 27 07:31:26 tourcom-laptop kernel: [ เธขย 766.852013] ALSA >>>>>>>> /usr/src/modules/alsa/alsa-driver-1.0.16/pci/hda/hda_intel.c:634: >>>>>>>> hda_intel: azx_get_response timeout, switching to polling mode: >>>>>>>> last >>>>>>>> cmd=0x10490000 >>>>>>>> >>>>>>>> >>>>>>>> I sent my new scanmodem data to you. >>>>>>>> please help me to follow the step that you advice with a command >>>>>>>> code. >>>>>>>> >>>>>>>> Thank you, >>>>>>>> >>>>>>>> Tour. >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>> Tour, >>>>>>>>> >>>>>>>>> I looked back at your ModemData.txt sent a few days ago, it does >>>>>>>>> not >>>>>>>>> agree with output from scanModem :(, >>>>>>>>> >>>>>>>>> http://www.nabble.com/Please-help-me-to-set-up-my-modem-to23204381.html >>>>>>>>> >>>>>>>>> In the scanModem that you sent the alsa version is 1.0.19, and >>>>>>>>> with >>>>>>>>> the output messages that you sent it is 1.0.16 : >>>>>>>>> >>>>>>>>> Apr 24 16:19:38 tourcom-laptop kernel: [ เธขย 731.524013] ALSA >>>>>>>>> /usr/src/modules/alsa/alsa-driver-1.0.16/pci/hda/hda_intel.c:634: >>>>>>>>> hda_intel: azx_get_response timeout, switching to polling mode: >>>>>>>>> last >>>>>>>>> cmd=0x10490000 >>>>>>>>> >>>>>>>>> would you mind sending ModemData.txt again, re run scanModem and >>>>>>>>> send >>>>>>>>> it back to list. เธขย It is hard to troubleshoot with too many >>>>>>>>> things >>>>>>>>> going on. >>>>>>>>> >>>>>>>>> Regards, >>>>>>>>> >>>>>>>>> Antonio >>>>>>>>> >>>>>>>>> On 4/26/09, Antonio Olivares <olivares14031@xxxxxxxxx> wrote: >>>>>>>>>> Tour, >>>>>>>>>> >>>>>>>>>> I see too many interfaces interfering with your connection(s). >>>>>>>>>> >>>>>>>>>> Apr 25 17:31:34 tourcom-laptop kernel: [ เธขย 231.792507] PPP >>>>>>>>>> generic >>>>>>>>>> driver version 2.4.2 >>>>>>>>>> Apr 25 17:31:34 tourcom-laptop pppd[6494]: pppd 2.4.4 started by >>>>>>>>>> root, >>>>>>>>>> uid >>>>>>>>>> 0 >>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (BUSY) >>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (NO CARRIER) >>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (VOICE) >>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (NO DIALTONE) >>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (NO DIAL >>>>>>>>>> TONE) >>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (NO ANSWER) >>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (DELAYED) >>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: send (ATZ^M) >>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: expect (OK) >>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: ATZ^M^M >>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: OK >>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: เธขย -- got it >>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: send (ATDT#99^M) >>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: expect (CONNECT) >>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: ^M >>>>>>>>>> Apr 25 17:31:38 tourcom-laptop chat[6499]: ATDT#99^M^M >>>>>>>>>> Apr 25 17:31:38 tourcom-laptop chat[6499]: NO CARRIER >>>>>>>>>> Apr 25 17:31:38 tourcom-laptop chat[6499]: เธขย -- failed >>>>>>>>>> Apr 25 17:31:38 tourcom-laptop chat[6499]: Failed (NO CARRIER) >>>>>>>>>> Apr 25 17:31:39 tourcom-laptop pppd[6494]: Exit. >>>>>>>>>> Apr 25 17:35:17 tourcom-laptop pppd[6536]: pppd 2.4.4 started by >>>>>>>>>> root, >>>>>>>>>> uid >>>>>>>>>> 0 >>>>>>>>>> Apr 25 17:35:17 tourcom-laptop pppd[6536]: Using interface ppp0 >>>>>>>>>> Apr 25 17:35:17 tourcom-laptop pppd[6536]: Connect: ppp0 <--> >>>>>>>>>> /dev/ttyACM0 >>>>>>>>>> Apr 25 17:35:36 tourcom-laptop pppd[6536]: Serial line is looped >>>>>>>>>> back. >>>>>>>>>> Apr 25 17:35:36 tourcom-laptop pppd[6536]: Connection terminated. >>>>>>>>>> Apr 25 17:35:36 tourcom-laptop pppd[6536]: Exit. >>>>>>>>>> Apr 25 17:37:38 tourcom-laptop pppd[6563]: pppd 2.4.4 started by >>>>>>>>>> root, >>>>>>>>>> uid >>>>>>>>>> 0 >>>>>>>>>> Apr 25 17:37:38 tourcom-laptop pppd[6563]: Using interface ppp0 >>>>>>>>>> Apr 25 17:37:38 tourcom-laptop pppd[6563]: Connect: ppp0 <--> >>>>>>>>>> /dev/ttyACM0 >>>>>>>>>> Apr 25 17:37:56 tourcom-laptop pppd[6563]: Serial line is looped >>>>>>>>>> back. >>>>>>>>>> Apr 25 17:37:56 tourcom-laptop pppd[6563]: Connection terminated. >>>>>>>>>> Apr 25 17:37:56 tourcom-laptop pppd[6563]: Exit. >>>>>>>>>> Apr 25 17:39:19 tourcom-laptop pppd[6583]: pppd 2.4.4 started by >>>>>>>>>> root, >>>>>>>>>> uid >>>>>>>>>> 0 >>>>>>>>>> Apr 25 17:39:19 tourcom-laptop pppd[6583]: Using interface ppp0 >>>>>>>>>> Apr 25 17:39:19 tourcom-laptop pppd[6583]: Connect: ppp0 <--> >>>>>>>>>> /dev/ttyACM0 >>>>>>>>>> Apr 25 17:39:24 tourcom-laptop pppd[6583]: PAP authentication >>>>>>>>>> succeeded >>>>>>>>>> Apr 25 17:39:24 tourcom-laptop kernel: [ เธขย 701.755111] PPP BSD >>>>>>>>>> Compression module registered >>>>>>>>>> Apr 25 17:39:24 tourcom-laptop kernel: [ เธขย 701.833370] PPP >>>>>>>>>> Deflate >>>>>>>>>> Compression module registered >>>>>>>>>> Apr 25 17:39:39 tourcom-laptop pppd[6583]: local เธขย IP address >>>>>>>>>> 10.174.152.18 >>>>>>>>>> Apr 25 17:39:39 tourcom-laptop pppd[6583]: remote IP address >>>>>>>>>> 10.1.1.1 >>>>>>>>>> Apr 25 17:39:39 tourcom-laptop pppd[6583]: primary เธขย DNS >>>>>>>>>> address >>>>>>>>>> 203.146.237.237 >>>>>>>>>> Apr 25 17:39:39 tourcom-laptop pppd[6583]: secondary DNS address >>>>>>>>>> 202.149.24.5 >>>>>>>>>> Apr 25 17:42:07 tourcom-laptop pppd[6583]: Terminating on signal >>>>>>>>>> 15 >>>>>>>>>> Apr 25 17:42:07 tourcom-laptop pppd[6583]: Connect time 2.5 >>>>>>>>>> minutes. >>>>>>>>>> Apr 25 17:42:07 tourcom-laptop pppd[6583]: Sent 68036 bytes, >>>>>>>>>> received >>>>>>>>>> 263473 bytes. >>>>>>>>>> Apr 25 17:42:07 tourcom-laptop pppd[6583]: Connection terminated. >>>>>>>>>> Apr 25 17:42:07 tourcom-laptop pppd[6583]: Exit. >>>>>>>>>> Apr 25 17:42:15 tourcom-laptop kernel: [ เธขย 873.128154] usb >>>>>>>>>> 2-2: USB >>>>>>>>>> disconnect, address 2 >>>>>>>>>> >>>>>>>>>> Here above shows that you apparently used a USB modem with device >>>>>>>>>> /dev/ttyACM0 >>>>>>>>>> that has nothing to do with the device that you apparently need >>>>>>>>>> to >>>>>>>>>> use >>>>>>>>>> /dev/ttySL0 >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Apr 24 22:05:24 tourcom-laptop pppd[6415]: pppd 2.4.4 started by >>>>>>>>>> root, >>>>>>>>>> uid >>>>>>>>>> 0 >>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (BUSY) >>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (NO CARRIER) >>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (VOICE) >>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (NO DIALTONE) >>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (NO DIAL >>>>>>>>>> TONE) >>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (NO ANSWER) >>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (DELAYED) >>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: send (ATZ^M) >>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: expect (OK) >>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: ^M^M^MATZ^M^M >>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: OK >>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: เธขย -- got it >>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: send (ATDT1222^M) >>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: expect (CONNECT) >>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: ^M >>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: ATDT1222^M^M >>>>>>>>>> Apr 24 22:06:03 tourcom-laptop chat[6420]: NO CARRIER >>>>>>>>>> Apr 24 22:06:03 tourcom-laptop chat[6420]: เธขย -- failed >>>>>>>>>> Apr 24 22:06:03 tourcom-laptop chat[6420]: Failed (NO CARRIER) >>>>>>>>>> Apr 24 22:06:04 tourcom-laptop pppd[6415]: Exit. >>>>>>>>>> Apr 24 22:07:13 tourcom-laptop kernel: [ เธขย 380.500015] ALSA >>>>>>>>>> /usr/src/modules/alsa/alsa-driver-1.0.16/pci/hda/hda_intel.c:634: >>>>>>>>>> hda_intel: azx_get_response timeout, switching to polling mode: >>>>>>>>>> last >>>>>>>>>> cmd=0x10490000 >>>>>>>>>> Apr 24 22:07:51 tourcom-laptop pppd[6443]: pppd 2.4.4 started by >>>>>>>>>> root, >>>>>>>>>> uid >>>>>>>>>> 0 >>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (BUSY) >>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (NO CARRIER) >>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (VOICE) >>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (NO DIALTONE) >>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (NO DIAL >>>>>>>>>> TONE) >>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (NO ANSWER) >>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (DELAYED) >>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: send (ATZ^M) >>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: expect (OK) >>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: ^M^M^MATZ^M^M >>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: OK >>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: เธขย -- got it >>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: send (ATDT1222^M) >>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: expect (CONNECT) >>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: ^M >>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: ATDT1222^M^M >>>>>>>>>> Apr 24 22:08:30 tourcom-laptop chat[6445]: NO CARRIER >>>>>>>>>> Apr 24 22:08:30 tourcom-laptop chat[6445]: เธขย -- failed >>>>>>>>>> Apr 24 22:08:30 tourcom-laptop chat[6445]: Failed (NO CARRIER) >>>>>>>>>> Apr 24 22:08:31 tourcom-laptop pppd[6443]: Exit. >>>>>>>>>> >>>>>>>>>> Here wlan0 is another interface that is not needed when you are >>>>>>>>>> trying >>>>>>>>>> to connect with dialup. >>>>>>>>>> It needs to be shut off to troubleshoot the dialup connection. >>>>>>>>>> >>>>>>>>>> $ sudo ifconfig wlan0 down >>>>>>>>>> and all others too like eth0, eth1 etc. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Apr 20 14:45:17 tourcom-laptop kernel: [ เธขย 22.526400] wlan0: >>>>>>>>>> ethernet >>>>>>>>>> device 00:16:cf:73:b1:97 using serialized NDIS driver: net5211, >>>>>>>>>> version: 0x40002, NDIS version: 0x501, vendor: 'NDIS Network >>>>>>>>>> Adapter', >>>>>>>>>> 168C:001A.5.conf >>>>>>>>>> Apr 20 14:45:17 tourcom-laptop kernel: [ เธขย 22.543385] >>>>>>>>>> acer-wmi: >>>>>>>>>> Acer >>>>>>>>>> Laptop ACPI-WMI Extras >>>>>>>>>> Apr 20 14:45:17 tourcom-laptop kernel: [ เธขย 22.568075] wlan0: >>>>>>>>>> encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; >>>>>>>>>> AES/CCMP with WPA, WPA2, WPA2PSK >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> What is this ? >>>>>>>>>> >>>>>>>>>> Apr 20 14:45:38 tourcom-laptop kernel: [ เธขย 51.034653] >>>>>>>>>> Intel537: >>>>>>>>>> disagrees about version of symbol struct_module >>>>>>>>>> Apr 20 14:45:38 tourcom-laptop kernel: [ เธขย 51.081436] >>>>>>>>>> Intel537: >>>>>>>>>> disagrees about version of symbol struct_module >>>>>>>>>> >>>>>>>>>> Intel537 modem?? เธขย too, เธขย Did not see that one when you >>>>>>>>>> sent >>>>>>>>>> ModemData.txt first. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Apr 20 14:45:40 tourcom-laptop kernel: [ เธขย 53.644280] sky2 >>>>>>>>>> eth0: >>>>>>>>>> enabling interface >>>>>>>>>> Apr 20 14:45:40 tourcom-laptop kernel: [ เธขย 53.647244] >>>>>>>>>> ADDRCONF(NETDEV_UP): eth0: link is not ready >>>>>>>>>> Apr 20 14:45:42 tourcom-laptop kernel: [ เธขย 55.293253] sky2 >>>>>>>>>> eth0: >>>>>>>>>> Link >>>>>>>>>> is up at 100 Mbps, full duplex, flow control both >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Apr 20 18:23:18 tourcom-laptop kernel: [ 1837.606047] sky2 eth0: >>>>>>>>>> Link is >>>>>>>>>> down. >>>>>>>>>> Apr 20 18:23:20 tourcom-laptop kernel: [ 1839.206504] sky2 eth0: >>>>>>>>>> Link >>>>>>>>>> is up at 100 Mbps, full duplex, flow control both >>>>>>>>>> Apr 20 18:23:26 tourcom-laptop kernel: [ 1845.688796] sky2 eth0: >>>>>>>>>> Link is >>>>>>>>>> down. >>>>>>>>>> Apr 20 18:23:52 tourcom-laptop kernel: [ 1871.418303] sky2 eth0: >>>>>>>>>> Link >>>>>>>>>> is up at 100 Mbps, full duplex, flow control both >>>>>>>>>> Apr 20 18:34:19 tourcom-laptop kernel: [ 2498.381516] device eth0 >>>>>>>>>> left >>>>>>>>>> promiscuous mode >>>>>>>>>> >>>>>>>>>> Try one thing at a time. เธขย You are trying to do too much. >>>>>>>>>> เธขย If you >>>>>>>>>> want >>>>>>>>>> to connect with slmodemd use that and that only. เธขย When >>>>>>>>>> attempting >>>>>>>>>> to >>>>>>>>>> connect, open a terminal and type >>>>>>>>>> $ sudo tail -f /var/log/messages >>>>>>>>>> >>>>>>>>>> send only the parts when the connection is taking place and when >>>>>>>>>> it >>>>>>>>>> fails. >>>>>>>>>> >>>>>>>>>> Regards, >>>>>>>>>> >>>>>>>>>> Antonio >>>>>>>>>> >>>>>>>>>> On 4/26/09, Patompong Kumdang <u500910052@xxxxxx> wrote: >>>>>>>>>>> Hello, >>>>>>>>>>> I heve sent this log file to you. >>>>>>>>>>> >>>>>>>>>>> Thank you. >>>>>>>>>>> >>>>>>>>>>> Tour. >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>>> Tour, >>>>>>>>>>>> >>>>>>>>>>>> Could you try to make a log file of your session >>>>>>>>>>>> >>>>>>>>>>>> $ sudo wvdial 2>&1 | tee wvdial.out >>>>>>>>>>>> >>>>>>>>>>>> send wvdial.out to us(list) >>>>>>>>>>>> >>>>>>>>>>>> เธขย and attach output of >>>>>>>>>>>> $ sudo tail -f var/log/messages >>>>>>>>>>>> >>>>>>>>>>>> Report back presently. >>>>>>>>>>>> >>>>>>>>>>>> Regards, >>>>>>>>>>>> >>>>>>>>>>>> Antonio >>>>>>>>>>>> >>>>>>>>>>>> 2009/4/25 Patompong Kumdang <u500910052@xxxxxx>: >>>>>>>>>>>>> Antonio, >>>>>>>>>>>>> >>>>>>>>>>>>> I don't know about how to choose driver to in stall, >>>>>>>>>>>>> I follow the step that Marv suggest. >>>>>>>>>>>>> My username and password is a free account in my country.(it's >>>>>>>>>>>>> safe ) >>>>>>>>>>>>> In windows I don't use a special command. >>>>>>>>>>>>> Now, I guess my modem can't sent signal to server. >>>>>>>>>>>>> Do you listen the file that I sent to you. >>>>>>>>>>>> >>>>>>>>>>>> Yes, I get typically the same sound when I dialup too! >>>>>>>>>>>>> >>>>>>>>>>>>> Thank you very much :) >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> Tour. >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>>> TouR, Marv >>>>>>>>>>>>>> >>>>>>>>>>>>>> I don't know if this will make a difference, but since your >>>>>>>>>>>>>> using >>>>>>>>>>>>>> precompiled SLMODEMD with ALSA support, your alsa version is >>>>>>>>>>>>>> 1.0.19 >>>>>>>>>>>>>> and there does not exist a 1.0.19 >>>>>>>>>>>>>> SLMODEMD.gcc4.3_alsa1.0.19.tar.gz. >>>>>>>>>>>>>> Marv will it make a difference if he needs a >>>>>>>>>>>>>> gcc4.3_alsa1.0.19 >>>>>>>>>>>>>> SLMODEMD? เธขย He is having difficulties getting connected to >>>>>>>>>>>>>> internet. >>>>>>>>>>>>>> This email sent to Marv, and Jacques not to list so your >>>>>>>>>>>>>> username >>>>>>>>>>>>>> and >>>>>>>>>>>>>> password will be safe! >>>>>>>>>>>>>> >>>>>>>>>>>>>> TouR, >>>>>>>>>>>>>> my wvdial.conf file looks this way: >>>>>>>>>>>>>> [olivares@localhost ~]$ cat /etc/wvdial.conf >>>>>>>>>>>>>> >>>>>>>>>>>>>> [Dialer Defaults] >>>>>>>>>>>>>> Init2 = ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90 >>>>>>>>>>>>>> Modem Type = Analog Modem >>>>>>>>>>>>>> Phone = 7072000 >>>>>>>>>>>>>> ISDN = 0 >>>>>>>>>>>>>> Username = myusername >>>>>>>>>>>>>> Init1 = ATZ >>>>>>>>>>>>>> Password = ************ >>>>>>>>>>>>>> Modem = /dev/ttySL0 >>>>>>>>>>>>>> Baud = 460800 >>>>>>>>>>>>>> Carrier Check = No >>>>>>>>>>>>>> Stupid Mode = 1 >>>>>>>>>>>>>> >>>>>>>>>>>>>> A SLMODEMD with alsa 1.0.19 might be his best bet? เธขย Don't >>>>>>>>>>>>>> know >>>>>>>>>>>>>> if >>>>>>>>>>>>>> this >>>>>>>>>>>>>> makes a difference, but why not ask? >>>>>>>>>>>>>> >>>>>>>>>>>>>> http://linmodems.technion.ac.il/packages/smartlink/ >>>>>>>>>>>>>> >>>>>>>>>>>>>> Here's your wvdial.con >>>>>>>>>>>>>> this is my wvdial.conf file >>>>>>>>>>>>>> ------------------------------------- >>>>>>>>>>>>>> [Dialer Defaults] >>>>>>>>>>>>>> Modem = /dev/ttySL0 >>>>>>>>>>>>>> Init1 = ATZ >>>>>>>>>>>>>> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>>>>>>>>>>> ;Stupid Mode = 1 >>>>>>>>>>>>>> Modem Type = Analog Modem >>>>>>>>>>>>>> Phone = 1222 >>>>>>>>>>>>>> ISDN = 0 >>>>>>>>>>>>>> Username = U89$0y)9@xxxxxxxxxxxxx >>>>>>>>>>>>>> Carrier Check = no >>>>>>>>>>>>>> Password = j4**9c+p >>>>>>>>>>>>>> Baud = 460800 >>>>>>>>>>>>>> >>>>>>>>>>>>>> Jacques, เธขย is a username allow characters like ")" in >>>>>>>>>>>>>> wvdial.conf ? >>>>>>>>>>>>>> U89$0y)9@xxxxxxxxxxxxx เธขย ? >>>>>>>>>>>>>> >>>>>>>>>>>>>> I am looking for what your ISP requires, but can't seem to >>>>>>>>>>>>>> find >>>>>>>>>>>>>> anything. >>>>>>>>>>>>>> >>>>>>>>>>>>>> http://www.tot.co.th/toten/index.php?option=com_content&task=view&id=363&Itemid=1121 >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> TouR >>>>>>>>>>>>>> Do you use any special commands or strings to connect via >>>>>>>>>>>>>> windows? >>>>>>>>>>>>>> It is strange that the connection can't seem to get through? >>>>>>>>>>>>>> >>>>>>>>>>>>>> 2009/4/25 Patompong Kumdang <u500910052@xxxxxx>: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Antonio, >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Thanks. for your help. :) >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> I try to modify wvdial.conf, But it has the same problem. >>>>>>>>>>>>>>> I attach file that contain the sound that I hear when >>>>>>>>>>>>>>> connect >>>>>>>>>>>>>>> using ubuntu (001.wav) and using windows (003.wav)(windows >>>>>>>>>>>>>>> can >>>>>>>>>>>>>>> connect) >>>>>>>>>>>>>>> I guess my modem can't sent information to server? >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> and this is my log file >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> ---------------------------------------------------------- >>>>>>>>>>>>>>> Baud = 57,600 เธขย , +MS=34 >>>>>>>>>>>>>>> ---------------------------------------------------------- >>>>>>>>>>>>>>> --> WvDial: Internet dialer version 1.60 >>>>>>>>>>>>>>> --> Cannot get information for serial port. >>>>>>>>>>>>>>> --> Initializing modem. >>>>>>>>>>>>>>> --> Sending: ATZ >>>>>>>>>>>>>>> ATZ >>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>> --> Sending: ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=34 >>>>>>>>>>>>>>> ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=34 >>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>> --> Modem initialized. >>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>>>> --> No Carrier! เธขย Trying again. >>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>> --> Timed out while dialing. เธขย Trying again. >>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>> --> No Carrier! เธขย Trying again. >>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>> --> No Carrier! เธขย Trying again. >>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>> --> No Carrier! เธขย Trying again. >>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> ------------------------------------------------------------------ >>>>>>>>>>>>>>> Baud = 57,600 เธขย ,+MS=90 >>>>>>>>>>>>>>> ------------------------------------------------------------------ >>>>>>>>>>>>>>> --> WvDial: Internet dialer version 1.60 >>>>>>>>>>>>>>> --> Cannot get information for serial port. >>>>>>>>>>>>>>> --> Initializing modem. >>>>>>>>>>>>>>> --> Sending: ATZ >>>>>>>>>>>>>>> ATZ >>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>> --> Sending: ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90 >>>>>>>>>>>>>>> ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90 >>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>> --> Modem initialized. >>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>>>> --> No Carrier! เธขย Trying again. >>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> ------------------------------------------------ >>>>>>>>>>>>>>> Baud = 115,200 เธขย , +MS=90 >>>>>>>>>>>>>>> ------------------------------------------------ >>>>>>>>>>>>>>> --> WvDial: Internet dialer version 1.60 >>>>>>>>>>>>>>> --> Cannot get information for serial port. >>>>>>>>>>>>>>> --> Initializing modem. >>>>>>>>>>>>>>> --> Sending: ATZ >>>>>>>>>>>>>>> ATZ >>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>> --> Sending: ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90 >>>>>>>>>>>>>>> ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90 >>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>> --> Modem initialized. >>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>>>> --> No Carrier! เธขย Trying again. >>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> --------------------------------------------------------- >>>>>>>>>>>>>>> Baud = 115,200 , เธขย +MS=34 >>>>>>>>>>>>>>> --------------------------------------------------------- >>>>>>>>>>>>>>> --> WvDial: Internet dialer version 1.60 >>>>>>>>>>>>>>> --> Cannot get information for serial port. >>>>>>>>>>>>>>> --> Initializing modem. >>>>>>>>>>>>>>> --> Sending: ATZ >>>>>>>>>>>>>>> ATZ >>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>> --> Sending: ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=34 >>>>>>>>>>>>>>> ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=34 >>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>> --> Modem initialized. >>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>>>> --> No Carrier! เธขย Trying again. >>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> ------------------------------------------------------------------ >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Tour, >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Try to modify wvdial.conf from >>>>>>>>>>>>>>>> [Dialer Defaults] >>>>>>>>>>>>>>>> Modem = /dev/ttySL0 >>>>>>>>>>>>>>>> Init1 = ATZ >>>>>>>>>>>>>>>> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>>>>>>>>>>>>> ;Stupid Mode = 1 >>>>>>>>>>>>>>>> Modem Type = Analog Modem >>>>>>>>>>>>>>>> Phone = 1222 >>>>>>>>>>>>>>>> ISDN = 0 >>>>>>>>>>>>>>>> Username = U89$0y)9@xxxxxxxxxxxxx >>>>>>>>>>>>>>>> Carrier Check = no >>>>>>>>>>>>>>>> Password = ********** เธขย <--- change this to ***** be >>>>>>>>>>>>>>>> careful >>>>>>>>>>>>>>>> with >>>>>>>>>>>>>>>> passwords others can take advantage when posting to list >>>>>>>>>>>>>>>> Baud = 460800 >>>>>>>>>>>>>>>> to >>>>>>>>>>>>>>>> [Dialer Defaults] >>>>>>>>>>>>>>>> Modem = /dev/ttySL0 >>>>>>>>>>>>>>>> Init1 = ATZ >>>>>>>>>>>>>>>> Init2 = ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90 เธขย <--- >>>>>>>>>>>>>>>> เธขย add X3 >>>>>>>>>>>>>>>> option to >>>>>>>>>>>>>>>> skip dialtone checking, and add +MS=90 you may try +MS=34 >>>>>>>>>>>>>>>> if >>>>>>>>>>>>>>>> +MS=90 >>>>>>>>>>>>>>>> does not help you get connected >>>>>>>>>>>>>>>> Modem Type = Analog Modem >>>>>>>>>>>>>>>> Phone = 1222 >>>>>>>>>>>>>>>> Baud = 460800 เธขย <---- you can also try lower bauds like >>>>>>>>>>>>>>>> 115,200 or >>>>>>>>>>>>>>>> 57,600 in case it is needed. >>>>>>>>>>>>>>>> ISDN = 0 >>>>>>>>>>>>>>>> Username = U89$0y)9@xxxxxxxxxxxxx >>>>>>>>>>>>>>>> Password = ********** >>>>>>>>>>>>>>>> Carrier Check = no >>>>>>>>>>>>>>>> Stupid Mode = 1 เธขย <--- remove the ";", it might help get >>>>>>>>>>>>>>>> you >>>>>>>>>>>>>>>> connected >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Try that and report back. เธขย Also, if for any reason you >>>>>>>>>>>>>>>> do >>>>>>>>>>>>>>>> not >>>>>>>>>>>>>>>> get >>>>>>>>>>>>>>>> connected, try reading the DOCs/wvdial.txt file. เธขย In >>>>>>>>>>>>>>>> that >>>>>>>>>>>>>>>> file it >>>>>>>>>>>>>>>> summarizes more of what I am recommending here. เธขย Also >>>>>>>>>>>>>>>> try to >>>>>>>>>>>>>>>> create >>>>>>>>>>>>>>>> a >>>>>>>>>>>>>>>> file that you may send should you fail to get connected. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> ## เธขย เธขย To make a logfile wvdial.out >>>>>>>>>>>>>>>> $ sudo wvdial 2>&1 | tee wvdial.out >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> and attach wvdial.out to list. เธขย You may also read up on >>>>>>>>>>>>>>>> Jacques' >>>>>>>>>>>>>>>> post-install troubleshooting guide/howto : >>>>>>>>>>>>>>>> http://linmodems.technion.ac.il/post-install.html >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Regards, >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Antonio >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> 2009/4/24 Patompong Kumdang <u500910052@xxxxxx>: >>>>>>>>>>>>>>>>> Hello, >>>>>>>>>>>>>>>>> I'm Tour, Thailand >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> I cannot connect to internet by using my internal modem. >>>>>>>>>>>>>>>>> I use ubuntu 8.1 เธขย kernel 2.6.27-10-generic >>>>>>>>>>>>>>>>> when I connect, I can hear the dial tone like as connect >>>>>>>>>>>>>>>>> by >>>>>>>>>>>>>>>>> windows, >>>>>>>>>>>>>>>>> But the sound that I hear not the same, It stop sound >>>>>>>>>>>>>>>>> later. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> (I guss you เธขย know that I tell, my english not very >>>>>>>>>>>>>>>>> well) >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> this is my wvdial.conf >>>>>>>>>>>>>>>>> ------------------------------------------- >>>>>>>>>>>>>>>>> root@tourcom-laptop:/home/tourcom# wvdialconf >>>>>>>>>>>>>>>>> /etc/wvdial.conf >>>>>>>>>>>>>>>>> Editing `/etc/wvdial.conf'. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Scanning your serial ports for a modem. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Modem Port Scan<*1>: S0 เธขย S1 เธขย S2 เธขย S3 >>>>>>>>>>>>>>>>> WvModem<*1>: Cannot get information for serial port. >>>>>>>>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 -- OK >>>>>>>>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 Z -- OK >>>>>>>>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 -- OK >>>>>>>>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK >>>>>>>>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK >>>>>>>>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK >>>>>>>>>>>>>>>>> ttySL0<*1>: Modem Identifier: ATI -- SmartLink Soft Modem >>>>>>>>>>>>>>>>> ttySL0<*1>: Speed 4800: AT -- OK >>>>>>>>>>>>>>>>> ttySL0<*1>: Speed 9600: AT -- OK >>>>>>>>>>>>>>>>> ttySL0<*1>: Speed 19200: AT -- OK >>>>>>>>>>>>>>>>> ttySL0<*1>: Speed 38400: AT -- OK >>>>>>>>>>>>>>>>> ttySL0<*1>: Speed 57600: AT -- OK >>>>>>>>>>>>>>>>> ttySL0<*1>: Speed 115200: AT -- OK >>>>>>>>>>>>>>>>> ttySL0<*1>: Speed 230400: AT -- OK >>>>>>>>>>>>>>>>> ttySL0<*1>: Speed 460800: AT -- OK >>>>>>>>>>>>>>>>> ttySL0<*1>: Max speed is 460800; that should be safe. >>>>>>>>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Found a modem on /dev/ttySL0. >>>>>>>>>>>>>>>>> Modem configuration written to /etc/wvdial.conf. >>>>>>>>>>>>>>>>> ttySL0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 >>>>>>>>>>>>>>>>> +FCLASS=0" >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> this is the script when I connect >>>>>>>>>>>>>>>>> ---------------------------------------------------------- >>>>>>>>>>>>>>>>> Script started on Sat 25 Apr 2009 09:48:30 AM ICT >>>>>>>>>>>>>>>>> เธขย ]0;root@tourcom-laptop: /home/tourcom >>>>>>>>>>>>>>>>> root@tourcom-laptop:/home/tourcom# >>>>>>>>>>>>>>>>> wvdial >>>>>>>>>>>>>>>>> --> WvDial: Internet dialer version 1.60 >>>>>>>>>>>>>>>>> --> Cannot get information for serial port. >>>>>>>>>>>>>>>>> --> Initializing modem. >>>>>>>>>>>>>>>>> --> Sending: ATZ >>>>>>>>>>>>>>>>> ATZ >>>>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>>>> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>>>>>>>>>>>>>> ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>>>> --> Modem initialized. >>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>>>>>> --> No Carrier! เธขย Trying again. >>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>>> ^CCaught signal 2: เธขย Attempting to exit gracefully... >>>>>>>>>>>>>>>>> --> Disconnecting at Sat Apr 25 09:49:42 2009 >>>>>>>>>>>>>>>>> เธขย ]0;root@tourcom-laptop: /home/tourcom >>>>>>>>>>>>>>>>> root@tourcom-laptop:/home/tourcom# >>>>>>>>>>>>>>>>> exit >>>>>>>>>>>>>>>>> exit >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Script done on Sat 25 Apr 2009 09:49:45 AM ICT >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> this is my wvdial.conf file >>>>>>>>>>>>>>>>> ------------------------------------- >>>>>>>>>>>>>>>>> [Dialer Defaults] >>>>>>>>>>>>>>>>> Modem = /dev/ttySL0 >>>>>>>>>>>>>>>>> Init1 = ATZ >>>>>>>>>>>>>>>>> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>>>>>>>>>>>>>> ;Stupid Mode = 1 >>>>>>>>>>>>>>>>> Modem Type = Analog Modem >>>>>>>>>>>>>>>>> Phone = 1222 >>>>>>>>>>>>>>>>> ISDN = 0 >>>>>>>>>>>>>>>>> Username = U89$0y)9@xxxxxxxxxxxxx >>>>>>>>>>>>>>>>> Carrier Check = no >>>>>>>>>>>>>>>>> Password = j4**9c+p >>>>>>>>>>>>>>>>> Baud = 460800 >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> <div><br></div> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> <div><br></div> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> <div><br></div> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>>>> >>>>> >>>> >>>> >>> >>> >>> >> >> > > >
