The MS drivers provide no additional useful information, beyond that of the ModemData.txt More this evening. MarvS 2009/4/27 Patompong Kumdang <u500910052@xxxxxx>: > Antonio, MarvS > > Sorry, ftp://u500910052@xxxxxxxxxxx/public_html/Modem.zip is broken. > > Please use this link to download again. > http://mail.cm.edu/~u500910052/Modem.zip > > Thanks, > Tour. > > > > >> Antonio, MarvS >> >> Can this windows driver tell you more information about my modem. >> please download these file at: >> ftp://u500910052@xxxxxxxxxxx/public_html/Modem.zip >> (sorry, my mail can not sent .zip file) >> >> Thanks, >> Tour. >> >> >> >>> Antonio >>> >>> "The ALSA verion is 1.0.19" output from the scanModem script is from a >>> call: >>> aplay --version >>> and this is typically matched with other ALSA components of an >>> installation. >>> >>> On the Ubuntu Jaunty I just upgraded to: >>> aplay --version >>> aplay: version 1.0.18 by Jaroslav Kysela <perex@xxxxxxxx> >>> So if is indeed puzzling as to why TouRs is 1.0.19 >>> >>> TourR, >>> Have you done any cogent alternations to your System. >>> >>> MarvS >>> >>> >>> On Sun, Apr 26, 2009 at 10:05 PM, Antonio Olivares >>> <olivares14031@xxxxxxxxx> wrote: >>>> Tour and Marv, >>>> >>>> I am trying to follow this carefully seeing where I can help, I see a >>>> problem here and I do not know why this is happening? >>>> >>>> /usr/src/modules/alsa/alsa-driver-1.0.16/pci/hda/hda_intel.c:634: >>>> ย hda_intel: azx_get_response timeout, switching to polling mode: last >>>> ย cmd=0x10490000 >>>> >>>> With the old ModemData.txt and the new one just sent, the alsa version >>>> is 1.0.19. ย This does not make sense. >>>> >>>> ===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== >>>> The ALSA packages provide audio support and also drivers for some >>>> modems. >>>> ALSA diagnostics are written during bootup to /proc/asound/ folders. >>>> >>>> The ALSA verion is 1.0.19 >>>> The modem cards detected by "aplay -l" ย are: >>>> card 0: Intel [HDA Intel], device 6: Si3054 Modem [Si3054 Modem] >>>> >>>> The /proc/asound/pcm file reports: >>>> ----------------------- >>>> 00-00: ALC883 Analog : ALC883 Analog : playback 1 : capture 1 >>>> 00-01: ALC883 Digital : ALC883 Digital : playback 1 >>>> 00-02: ALC883 Analog : ALC883 Analog : capture 1 >>>> 00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1 >>>> >>>> about /proc/asound/cards: >>>> ------------------------ >>>> ย 0 [Intel ย ย ย ย ย ]: HDA-Intel - HDA Intel >>>> ย ย ย ย ย ย ย ย ย ย ย HDA Intel at 0xd0340000 irq 22 >>>> >>>> ย PCI slot 00:1b.0 has a High Definition Audio Card >>>> ย The drivers are in the kernel modules tree at: >>>> ย /lib/modules/2.6.27-10-generic/kernel/sound/pci/hda/snd-hda-intel.ko >>>> /lib/modules/2.6.27-11-generic/kernel/sound/pci/hda/snd-hda-intel.ko >>>> /lib/modules/2.6.27-11-server/kernel/sound/pci/hda/snd-hda-intel.ko >>>> ย The modem codec file for the HDA card is: /proc/asound/card0/codec#1 >>>> >>>> >>>> I am thinking also since the alsa-version is 1.0.19, shouldn't the >>>> precompiled SLMODEMD.gcc4.3.tar.gz serve, a new one with >>>> -alsa-1.0.19.tar.gz probably needs to be created? >>>> >>>> My $0.02 >>>> >>>> Regards, >>>> >>>> Antonio >>>> >>>> On 4/27/09, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> wrote: >>>>> Tour >>>>> >>>>> For the Intel537 do: >>>>> >>>>> $ find /lib/modules --name Intel537*.ko >>>>> and delete any modules found. >>>>> >>>>> There may also be residual Intel537 files like: >>>>> ย ย ย /etc/init.d/537_boot >>>>> ย ย ย /etc/hamregistry.bin >>>>> ย ย ย /usr/sbin/usrsound >>>>> ย ย ย /usr/sbin/hamregistry >>>>> that should be removed. >>>>> >>>>> MarvS >>>>> >>>>> 2009/4/26 Patompong Kumdang <u500910052@xxxxxx>: >>>>>> hello, >>>>>> This time I will tell you more information about my computer. >>>>>> >>>>>>>>>Here above shows that you apparently used a USB modem with >>>>>>>>> >>>device >>>>>> /dev/ttyACM0 >>>>>>>>>that has nothing to do with the device that you apparently need to >>>>>>>>> use >>>>>>>>>/dev/ttySL0 >>>>>> I use mobile phone to connect to internet last week. (It can connect) >>>>>> >>>>>> >>>>>>>>>Here wlan0 is another interface that is not needed when you are >>>>>>>>> trying >>>>>>>>>to connect with dialup. >>>>>>>>>It needs to be shut off to troubleshoot the dialup connection. >>>>>> I have wireless modem and lan card too, but I not use at this time. >>>>>> >>>>>> >>>>>>>>>What is this ? >>>>>>>>>Apr 20 14:45:38 tourcom-laptop kernel: [ ย 51.034653] Intel537: >>>>>>>>>disagrees about version of symbol struct_module >>>>>>>>>Apr 20 14:45:38 tourcom-laptop kernel: [ ย 51.081436] Intel537: >>>>>>>>>disagrees about version of symbol struct_module >>>>>> I don't know about this driver. >>>>>> >>>>>> >>>>>> >>>>>>>>>there seems to be an Intel537 driver on your system from some >>>>>>>>> previous >>>>>> attempt, >>>>>>>>>which may be interfering. >>>>>>>>>Please uninstall/delete this driver from your System. >>>>>> I don't know how to remove this driver. >>>>>> >>>>>> >>>>>> >>>>>>>>>When attempting to >>>>>>>>>connect, open a terminal and type >>>>>>>>>$ sudo tail -f /var/log/messages >>>>>> I have got this message >>>>>> >>>>>> root@tourcom-laptop:/home/tourcom# sudo tail -f /var/log/messages >>>>>> >>>>>> Apr 27 07:19:32 tourcom-laptop kernel: [ ย 53.691210] [drm] >>>>>> Initialized >>>>>> drm 1.1.0 20060810 >>>>>> Apr 27 07:19:32 tourcom-laptop kernel: [ ย 53.698167] pci >>>>>> 0000:00:02.0: >>>>>> PCI INT A -> GSI 16 (level, low) -> IRQ 16 >>>>>> Apr 27 07:19:32 tourcom-laptop kernel: [ ย 53.699489] [drm] >>>>>> Initialized >>>>>> i915 1.6.0 20060119 on minor 0 >>>>>> Apr 27 07:19:33 tourcom-laptop kernel: [ ย 54.444472] sky2 eth0: >>>>>> enabling >>>>>> interface >>>>>> Apr 27 07:19:33 tourcom-laptop kernel: [ ย 54.447579] >>>>>> ADDRCONF(NETDEV_UP): >>>>>> eth0: link is not ready >>>>>> Apr 27 07:19:37 tourcom-laptop pulseaudio[6044]: ltdl-bind-now.c: >>>>>> Failed >>>>>> to find original dlopen loader. >>>>>> Apr 27 07:19:37 tourcom-laptop pulseaudio[6047]: main.c: >>>>>> setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted >>>>>> Apr 27 07:19:37 tourcom-laptop pulseaudio[6047]: main.c: >>>>>> setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted >>>>>> Apr 27 07:27:37 tourcom-laptop kernel: [ ย 538.346544] sky2 eth0: >>>>>> disabling >>>>>> interface >>>>>> Apr 27 07:31:26 tourcom-laptop kernel: [ ย 766.852013] ALSA >>>>>> /usr/src/modules/alsa/alsa-driver-1.0.16/pci/hda/hda_intel.c:634: >>>>>> hda_intel: azx_get_response timeout, switching to polling mode: last >>>>>> cmd=0x10490000 >>>>>> >>>>>> >>>>>> I sent my new scanmodem data to you. >>>>>> please help me to follow the step that you advice with a command >>>>>> code. >>>>>> >>>>>> Thank you, >>>>>> >>>>>> Tour. >>>>>> >>>>>> >>>>>> >>>>>> >>>>>>> Tour, >>>>>>> >>>>>>> I looked back at your ModemData.txt sent a few days ago, it does not >>>>>>> agree with output from scanModem :(, >>>>>>> >>>>>>> http://www.nabble.com/Please-help-me-to-set-up-my-modem-to23204381.html >>>>>>> >>>>>>> In the scanModem that you sent the alsa version is 1.0.19, and with >>>>>>> the output messages that you sent it is 1.0.16 : >>>>>>> >>>>>>> Apr 24 16:19:38 tourcom-laptop kernel: [ ย 731.524013] ALSA >>>>>>> /usr/src/modules/alsa/alsa-driver-1.0.16/pci/hda/hda_intel.c:634: >>>>>>> hda_intel: azx_get_response timeout, switching to polling mode: last >>>>>>> cmd=0x10490000 >>>>>>> >>>>>>> would you mind sending ModemData.txt again, re run scanModem and >>>>>>> send >>>>>>> it back to list. ย It is hard to troubleshoot with too many things >>>>>>> going on. >>>>>>> >>>>>>> Regards, >>>>>>> >>>>>>> Antonio >>>>>>> >>>>>>> On 4/26/09, Antonio Olivares <olivares14031@xxxxxxxxx> wrote: >>>>>>>> Tour, >>>>>>>> >>>>>>>> I see too many interfaces interfering with your connection(s). >>>>>>>> >>>>>>>> Apr 25 17:31:34 tourcom-laptop kernel: [ ย 231.792507] PPP generic >>>>>>>> driver version 2.4.2 >>>>>>>> Apr 25 17:31:34 tourcom-laptop pppd[6494]: pppd 2.4.4 started by >>>>>>>> root, >>>>>>>> uid >>>>>>>> 0 >>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (BUSY) >>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (NO CARRIER) >>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (VOICE) >>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (NO DIALTONE) >>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (NO DIAL TONE) >>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (NO ANSWER) >>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (DELAYED) >>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: send (ATZ^M) >>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: expect (OK) >>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: ATZ^M^M >>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: OK >>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: ย -- got it >>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: send (ATDT#99^M) >>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: expect (CONNECT) >>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: ^M >>>>>>>> Apr 25 17:31:38 tourcom-laptop chat[6499]: ATDT#99^M^M >>>>>>>> Apr 25 17:31:38 tourcom-laptop chat[6499]: NO CARRIER >>>>>>>> Apr 25 17:31:38 tourcom-laptop chat[6499]: ย -- failed >>>>>>>> Apr 25 17:31:38 tourcom-laptop chat[6499]: Failed (NO CARRIER) >>>>>>>> Apr 25 17:31:39 tourcom-laptop pppd[6494]: Exit. >>>>>>>> Apr 25 17:35:17 tourcom-laptop pppd[6536]: pppd 2.4.4 started by >>>>>>>> root, >>>>>>>> uid >>>>>>>> 0 >>>>>>>> Apr 25 17:35:17 tourcom-laptop pppd[6536]: Using interface ppp0 >>>>>>>> Apr 25 17:35:17 tourcom-laptop pppd[6536]: Connect: ppp0 <--> >>>>>>>> /dev/ttyACM0 >>>>>>>> Apr 25 17:35:36 tourcom-laptop pppd[6536]: Serial line is looped >>>>>>>> back. >>>>>>>> Apr 25 17:35:36 tourcom-laptop pppd[6536]: Connection terminated. >>>>>>>> Apr 25 17:35:36 tourcom-laptop pppd[6536]: Exit. >>>>>>>> Apr 25 17:37:38 tourcom-laptop pppd[6563]: pppd 2.4.4 started by >>>>>>>> root, >>>>>>>> uid >>>>>>>> 0 >>>>>>>> Apr 25 17:37:38 tourcom-laptop pppd[6563]: Using interface ppp0 >>>>>>>> Apr 25 17:37:38 tourcom-laptop pppd[6563]: Connect: ppp0 <--> >>>>>>>> /dev/ttyACM0 >>>>>>>> Apr 25 17:37:56 tourcom-laptop pppd[6563]: Serial line is looped >>>>>>>> back. >>>>>>>> Apr 25 17:37:56 tourcom-laptop pppd[6563]: Connection terminated. >>>>>>>> Apr 25 17:37:56 tourcom-laptop pppd[6563]: Exit. >>>>>>>> Apr 25 17:39:19 tourcom-laptop pppd[6583]: pppd 2.4.4 started by >>>>>>>> root, >>>>>>>> uid >>>>>>>> 0 >>>>>>>> Apr 25 17:39:19 tourcom-laptop pppd[6583]: Using interface ppp0 >>>>>>>> Apr 25 17:39:19 tourcom-laptop pppd[6583]: Connect: ppp0 <--> >>>>>>>> /dev/ttyACM0 >>>>>>>> Apr 25 17:39:24 tourcom-laptop pppd[6583]: PAP authentication >>>>>>>> succeeded >>>>>>>> Apr 25 17:39:24 tourcom-laptop kernel: [ ย 701.755111] PPP BSD >>>>>>>> Compression module registered >>>>>>>> Apr 25 17:39:24 tourcom-laptop kernel: [ ย 701.833370] PPP Deflate >>>>>>>> Compression module registered >>>>>>>> Apr 25 17:39:39 tourcom-laptop pppd[6583]: local ย IP address >>>>>>>> 10.174.152.18 >>>>>>>> Apr 25 17:39:39 tourcom-laptop pppd[6583]: remote IP address >>>>>>>> 10.1.1.1 >>>>>>>> Apr 25 17:39:39 tourcom-laptop pppd[6583]: primary ย DNS address >>>>>>>> 203.146.237.237 >>>>>>>> Apr 25 17:39:39 tourcom-laptop pppd[6583]: secondary DNS address >>>>>>>> 202.149.24.5 >>>>>>>> Apr 25 17:42:07 tourcom-laptop pppd[6583]: Terminating on signal 15 >>>>>>>> Apr 25 17:42:07 tourcom-laptop pppd[6583]: Connect time 2.5 >>>>>>>> minutes. >>>>>>>> Apr 25 17:42:07 tourcom-laptop pppd[6583]: Sent 68036 bytes, >>>>>>>> received >>>>>>>> 263473 bytes. >>>>>>>> Apr 25 17:42:07 tourcom-laptop pppd[6583]: Connection terminated. >>>>>>>> Apr 25 17:42:07 tourcom-laptop pppd[6583]: Exit. >>>>>>>> Apr 25 17:42:15 tourcom-laptop kernel: [ ย 873.128154] usb 2-2: USB >>>>>>>> disconnect, address 2 >>>>>>>> >>>>>>>> Here above shows that you apparently used a USB modem with device >>>>>>>> /dev/ttyACM0 >>>>>>>> that has nothing to do with the device that you apparently need to >>>>>>>> use >>>>>>>> /dev/ttySL0 >>>>>>>> >>>>>>>> >>>>>>>> Apr 24 22:05:24 tourcom-laptop pppd[6415]: pppd 2.4.4 started by >>>>>>>> root, >>>>>>>> uid >>>>>>>> 0 >>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (BUSY) >>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (NO CARRIER) >>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (VOICE) >>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (NO DIALTONE) >>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (NO DIAL TONE) >>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (NO ANSWER) >>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (DELAYED) >>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: send (ATZ^M) >>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: expect (OK) >>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: ^M^M^MATZ^M^M >>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: OK >>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: ย -- got it >>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: send (ATDT1222^M) >>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: expect (CONNECT) >>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: ^M >>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: ATDT1222^M^M >>>>>>>> Apr 24 22:06:03 tourcom-laptop chat[6420]: NO CARRIER >>>>>>>> Apr 24 22:06:03 tourcom-laptop chat[6420]: ย -- failed >>>>>>>> Apr 24 22:06:03 tourcom-laptop chat[6420]: Failed (NO CARRIER) >>>>>>>> Apr 24 22:06:04 tourcom-laptop pppd[6415]: Exit. >>>>>>>> Apr 24 22:07:13 tourcom-laptop kernel: [ ย 380.500015] ALSA >>>>>>>> /usr/src/modules/alsa/alsa-driver-1.0.16/pci/hda/hda_intel.c:634: >>>>>>>> hda_intel: azx_get_response timeout, switching to polling mode: >>>>>>>> last >>>>>>>> cmd=0x10490000 >>>>>>>> Apr 24 22:07:51 tourcom-laptop pppd[6443]: pppd 2.4.4 started by >>>>>>>> root, >>>>>>>> uid >>>>>>>> 0 >>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (BUSY) >>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (NO CARRIER) >>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (VOICE) >>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (NO DIALTONE) >>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (NO DIAL TONE) >>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (NO ANSWER) >>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (DELAYED) >>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: send (ATZ^M) >>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: expect (OK) >>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: ^M^M^MATZ^M^M >>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: OK >>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: ย -- got it >>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: send (ATDT1222^M) >>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: expect (CONNECT) >>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: ^M >>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: ATDT1222^M^M >>>>>>>> Apr 24 22:08:30 tourcom-laptop chat[6445]: NO CARRIER >>>>>>>> Apr 24 22:08:30 tourcom-laptop chat[6445]: ย -- failed >>>>>>>> Apr 24 22:08:30 tourcom-laptop chat[6445]: Failed (NO CARRIER) >>>>>>>> Apr 24 22:08:31 tourcom-laptop pppd[6443]: Exit. >>>>>>>> >>>>>>>> Here wlan0 is another interface that is not needed when you are >>>>>>>> trying >>>>>>>> to connect with dialup. >>>>>>>> It needs to be shut off to troubleshoot the dialup connection. >>>>>>>> >>>>>>>> $ sudo ifconfig wlan0 down >>>>>>>> and all others too like eth0, eth1 etc. >>>>>>>> >>>>>>>> >>>>>>>> Apr 20 14:45:17 tourcom-laptop kernel: [ ย 22.526400] wlan0: >>>>>>>> ethernet >>>>>>>> device 00:16:cf:73:b1:97 using serialized NDIS driver: net5211, >>>>>>>> version: 0x40002, NDIS version: 0x501, vendor: 'NDIS Network >>>>>>>> Adapter', >>>>>>>> 168C:001A.5.conf >>>>>>>> Apr 20 14:45:17 tourcom-laptop kernel: [ ย 22.543385] acer-wmi: >>>>>>>> Acer >>>>>>>> Laptop ACPI-WMI Extras >>>>>>>> Apr 20 14:45:17 tourcom-laptop kernel: [ ย 22.568075] wlan0: >>>>>>>> encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; >>>>>>>> AES/CCMP with WPA, WPA2, WPA2PSK >>>>>>>> >>>>>>>> >>>>>>>> What is this ? >>>>>>>> >>>>>>>> Apr 20 14:45:38 tourcom-laptop kernel: [ ย 51.034653] Intel537: >>>>>>>> disagrees about version of symbol struct_module >>>>>>>> Apr 20 14:45:38 tourcom-laptop kernel: [ ย 51.081436] Intel537: >>>>>>>> disagrees about version of symbol struct_module >>>>>>>> >>>>>>>> Intel537 modem?? ย too, ย Did not see that one when you sent >>>>>>>> ModemData.txt first. >>>>>>>> >>>>>>>> >>>>>>>> Apr 20 14:45:40 tourcom-laptop kernel: [ ย 53.644280] sky2 eth0: >>>>>>>> enabling interface >>>>>>>> Apr 20 14:45:40 tourcom-laptop kernel: [ ย 53.647244] >>>>>>>> ADDRCONF(NETDEV_UP): eth0: link is not ready >>>>>>>> Apr 20 14:45:42 tourcom-laptop kernel: [ ย 55.293253] sky2 eth0: >>>>>>>> Link >>>>>>>> is up at 100 Mbps, full duplex, flow control both >>>>>>>> >>>>>>>> >>>>>>>> Apr 20 18:23:18 tourcom-laptop kernel: [ 1837.606047] sky2 eth0: >>>>>>>> Link is >>>>>>>> down. >>>>>>>> Apr 20 18:23:20 tourcom-laptop kernel: [ 1839.206504] sky2 eth0: >>>>>>>> Link >>>>>>>> is up at 100 Mbps, full duplex, flow control both >>>>>>>> Apr 20 18:23:26 tourcom-laptop kernel: [ 1845.688796] sky2 eth0: >>>>>>>> Link is >>>>>>>> down. >>>>>>>> Apr 20 18:23:52 tourcom-laptop kernel: [ 1871.418303] sky2 eth0: >>>>>>>> Link >>>>>>>> is up at 100 Mbps, full duplex, flow control both >>>>>>>> Apr 20 18:34:19 tourcom-laptop kernel: [ 2498.381516] device eth0 >>>>>>>> left >>>>>>>> promiscuous mode >>>>>>>> >>>>>>>> Try one thing at a time. ย You are trying to do too much. ย If you >>>>>>>> want >>>>>>>> to connect with slmodemd use that and that only. ย When attempting >>>>>>>> to >>>>>>>> connect, open a terminal and type >>>>>>>> $ sudo tail -f /var/log/messages >>>>>>>> >>>>>>>> send only the parts when the connection is taking place and when it >>>>>>>> fails. >>>>>>>> >>>>>>>> Regards, >>>>>>>> >>>>>>>> Antonio >>>>>>>> >>>>>>>> On 4/26/09, Patompong Kumdang <u500910052@xxxxxx> wrote: >>>>>>>>> Hello, >>>>>>>>> I heve sent this log file to you. >>>>>>>>> >>>>>>>>> Thank you. >>>>>>>>> >>>>>>>>> Tour. >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>> Tour, >>>>>>>>>> >>>>>>>>>> Could you try to make a log file of your session >>>>>>>>>> >>>>>>>>>> $ sudo wvdial 2>&1 | tee wvdial.out >>>>>>>>>> >>>>>>>>>> send wvdial.out to us(list) >>>>>>>>>> >>>>>>>>>> ย and attach output of >>>>>>>>>> $ sudo tail -f var/log/messages >>>>>>>>>> >>>>>>>>>> Report back presently. >>>>>>>>>> >>>>>>>>>> Regards, >>>>>>>>>> >>>>>>>>>> Antonio >>>>>>>>>> >>>>>>>>>> 2009/4/25 Patompong Kumdang <u500910052@xxxxxx>: >>>>>>>>>>> Antonio, >>>>>>>>>>> >>>>>>>>>>> I don't know about how to choose driver to in stall, >>>>>>>>>>> I follow the step that Marv suggest. >>>>>>>>>>> My username and password is a free account in my country.(it's >>>>>>>>>>> safe ) >>>>>>>>>>> In windows I don't use a special command. >>>>>>>>>>> Now, I guess my modem can't sent signal to server. >>>>>>>>>>> Do you listen the file that I sent to you. >>>>>>>>>> >>>>>>>>>> Yes, I get typically the same sound when I dialup too! >>>>>>>>>>> >>>>>>>>>>> Thank you very much :) >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Tour. >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>>> TouR, Marv >>>>>>>>>>>> >>>>>>>>>>>> I don't know if this will make a difference, but since your >>>>>>>>>>>> using >>>>>>>>>>>> precompiled SLMODEMD with ALSA support, your alsa version is >>>>>>>>>>>> 1.0.19 >>>>>>>>>>>> and there does not exist a 1.0.19 >>>>>>>>>>>> SLMODEMD.gcc4.3_alsa1.0.19.tar.gz. >>>>>>>>>>>> Marv will it make a difference if he needs a gcc4.3_alsa1.0.19 >>>>>>>>>>>> SLMODEMD? ย He is having difficulties getting connected to >>>>>>>>>>>> internet. >>>>>>>>>>>> This email sent to Marv, and Jacques not to list so your >>>>>>>>>>>> username >>>>>>>>>>>> and >>>>>>>>>>>> password will be safe! >>>>>>>>>>>> >>>>>>>>>>>> TouR, >>>>>>>>>>>> my wvdial.conf file looks this way: >>>>>>>>>>>> [olivares@localhost ~]$ cat /etc/wvdial.conf >>>>>>>>>>>> >>>>>>>>>>>> [Dialer Defaults] >>>>>>>>>>>> Init2 = ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90 >>>>>>>>>>>> Modem Type = Analog Modem >>>>>>>>>>>> Phone = 7072000 >>>>>>>>>>>> ISDN = 0 >>>>>>>>>>>> Username = myusername >>>>>>>>>>>> Init1 = ATZ >>>>>>>>>>>> Password = ************ >>>>>>>>>>>> Modem = /dev/ttySL0 >>>>>>>>>>>> Baud = 460800 >>>>>>>>>>>> Carrier Check = No >>>>>>>>>>>> Stupid Mode = 1 >>>>>>>>>>>> >>>>>>>>>>>> A SLMODEMD with alsa 1.0.19 might be his best bet? ย Don't know >>>>>>>>>>>> if >>>>>>>>>>>> this >>>>>>>>>>>> makes a difference, but why not ask? >>>>>>>>>>>> >>>>>>>>>>>> http://linmodems.technion.ac.il/packages/smartlink/ >>>>>>>>>>>> >>>>>>>>>>>> Here's your wvdial.con >>>>>>>>>>>> this is my wvdial.conf file >>>>>>>>>>>> ------------------------------------- >>>>>>>>>>>> [Dialer Defaults] >>>>>>>>>>>> Modem = /dev/ttySL0 >>>>>>>>>>>> Init1 = ATZ >>>>>>>>>>>> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>>>>>>>>> ;Stupid Mode = 1 >>>>>>>>>>>> Modem Type = Analog Modem >>>>>>>>>>>> Phone = 1222 >>>>>>>>>>>> ISDN = 0 >>>>>>>>>>>> Username = U89$0y)9@xxxxxxxxxxxxx >>>>>>>>>>>> Carrier Check = no >>>>>>>>>>>> Password = j4**9c+p >>>>>>>>>>>> Baud = 460800 >>>>>>>>>>>> >>>>>>>>>>>> Jacques, ย is a username allow characters like ")" in >>>>>>>>>>>> wvdial.conf ? >>>>>>>>>>>> U89$0y)9@xxxxxxxxxxxxx ย ? >>>>>>>>>>>> >>>>>>>>>>>> I am looking for what your ISP requires, but can't seem to find >>>>>>>>>>>> anything. >>>>>>>>>>>> >>>>>>>>>>>> http://www.tot.co.th/toten/index.php?option=com_content&task=view&id=363&Itemid=1121 >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> TouR >>>>>>>>>>>> Do you use any special commands or strings to connect via >>>>>>>>>>>> windows? >>>>>>>>>>>> It is strange that the connection can't seem to get through? >>>>>>>>>>>> >>>>>>>>>>>> 2009/4/25 Patompong Kumdang <u500910052@xxxxxx>: >>>>>>>>>>>>> >>>>>>>>>>>>> Antonio, >>>>>>>>>>>>> >>>>>>>>>>>>> Thanks. for your help. :) >>>>>>>>>>>>> >>>>>>>>>>>>> I try to modify wvdial.conf, But it has the same problem. >>>>>>>>>>>>> I attach file that contain the sound that I hear when connect >>>>>>>>>>>>> using ubuntu (001.wav) and using windows (003.wav)(windows can >>>>>>>>>>>>> connect) >>>>>>>>>>>>> I guess my modem can't sent information to server? >>>>>>>>>>>>> >>>>>>>>>>>>> and this is my log file >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> ---------------------------------------------------------- >>>>>>>>>>>>> Baud = 57,600 ย , +MS=34 >>>>>>>>>>>>> ---------------------------------------------------------- >>>>>>>>>>>>> --> WvDial: Internet dialer version 1.60 >>>>>>>>>>>>> --> Cannot get information for serial port. >>>>>>>>>>>>> --> Initializing modem. >>>>>>>>>>>>> --> Sending: ATZ >>>>>>>>>>>>> ATZ >>>>>>>>>>>>> OK >>>>>>>>>>>>> --> Sending: ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=34 >>>>>>>>>>>>> ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=34 >>>>>>>>>>>>> OK >>>>>>>>>>>>> --> Modem initialized. >>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>> --> No Carrier! ย Trying again. >>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>> --> Timed out while dialing. ย Trying again. >>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>> --> No Carrier! ย Trying again. >>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>> --> No Carrier! ย Trying again. >>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>> --> No Carrier! ย Trying again. >>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> ------------------------------------------------------------------ >>>>>>>>>>>>> Baud = 57,600 ย ,+MS=90 >>>>>>>>>>>>> ------------------------------------------------------------------ >>>>>>>>>>>>> --> WvDial: Internet dialer version 1.60 >>>>>>>>>>>>> --> Cannot get information for serial port. >>>>>>>>>>>>> --> Initializing modem. >>>>>>>>>>>>> --> Sending: ATZ >>>>>>>>>>>>> ATZ >>>>>>>>>>>>> OK >>>>>>>>>>>>> --> Sending: ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90 >>>>>>>>>>>>> ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90 >>>>>>>>>>>>> OK >>>>>>>>>>>>> --> Modem initialized. >>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>> --> No Carrier! ย Trying again. >>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> ------------------------------------------------ >>>>>>>>>>>>> Baud = 115,200 ย , +MS=90 >>>>>>>>>>>>> ------------------------------------------------ >>>>>>>>>>>>> --> WvDial: Internet dialer version 1.60 >>>>>>>>>>>>> --> Cannot get information for serial port. >>>>>>>>>>>>> --> Initializing modem. >>>>>>>>>>>>> --> Sending: ATZ >>>>>>>>>>>>> ATZ >>>>>>>>>>>>> OK >>>>>>>>>>>>> --> Sending: ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90 >>>>>>>>>>>>> ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90 >>>>>>>>>>>>> OK >>>>>>>>>>>>> --> Modem initialized. >>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>> --> No Carrier! ย Trying again. >>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> --------------------------------------------------------- >>>>>>>>>>>>> Baud = 115,200 , ย +MS=34 >>>>>>>>>>>>> --------------------------------------------------------- >>>>>>>>>>>>> --> WvDial: Internet dialer version 1.60 >>>>>>>>>>>>> --> Cannot get information for serial port. >>>>>>>>>>>>> --> Initializing modem. >>>>>>>>>>>>> --> Sending: ATZ >>>>>>>>>>>>> ATZ >>>>>>>>>>>>> OK >>>>>>>>>>>>> --> Sending: ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=34 >>>>>>>>>>>>> ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=34 >>>>>>>>>>>>> OK >>>>>>>>>>>>> --> Modem initialized. >>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>> --> No Carrier! ย Trying again. >>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> ------------------------------------------------------------------ >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>>> Tour, >>>>>>>>>>>>>> >>>>>>>>>>>>>> Try to modify wvdial.conf from >>>>>>>>>>>>>> [Dialer Defaults] >>>>>>>>>>>>>> Modem = /dev/ttySL0 >>>>>>>>>>>>>> Init1 = ATZ >>>>>>>>>>>>>> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>>>>>>>>>>> ;Stupid Mode = 1 >>>>>>>>>>>>>> Modem Type = Analog Modem >>>>>>>>>>>>>> Phone = 1222 >>>>>>>>>>>>>> ISDN = 0 >>>>>>>>>>>>>> Username = U89$0y)9@xxxxxxxxxxxxx >>>>>>>>>>>>>> Carrier Check = no >>>>>>>>>>>>>> Password = ********** ย <--- change this to ***** be careful >>>>>>>>>>>>>> with >>>>>>>>>>>>>> passwords others can take advantage when posting to list >>>>>>>>>>>>>> Baud = 460800 >>>>>>>>>>>>>> to >>>>>>>>>>>>>> [Dialer Defaults] >>>>>>>>>>>>>> Modem = /dev/ttySL0 >>>>>>>>>>>>>> Init1 = ATZ >>>>>>>>>>>>>> Init2 = ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90 ย <--- ย add X3 >>>>>>>>>>>>>> option to >>>>>>>>>>>>>> skip dialtone checking, and add +MS=90 you may try +MS=34 if >>>>>>>>>>>>>> +MS=90 >>>>>>>>>>>>>> does not help you get connected >>>>>>>>>>>>>> Modem Type = Analog Modem >>>>>>>>>>>>>> Phone = 1222 >>>>>>>>>>>>>> Baud = 460800 ย <---- you can also try lower bauds like >>>>>>>>>>>>>> 115,200 or >>>>>>>>>>>>>> 57,600 in case it is needed. >>>>>>>>>>>>>> ISDN = 0 >>>>>>>>>>>>>> Username = U89$0y)9@xxxxxxxxxxxxx >>>>>>>>>>>>>> Password = ********** >>>>>>>>>>>>>> Carrier Check = no >>>>>>>>>>>>>> Stupid Mode = 1 ย <--- remove the ";", it might help get you >>>>>>>>>>>>>> connected >>>>>>>>>>>>>> >>>>>>>>>>>>>> Try that and report back. ย Also, if for any reason you do >>>>>>>>>>>>>> not >>>>>>>>>>>>>> get >>>>>>>>>>>>>> connected, try reading the DOCs/wvdial.txt file. ย In that >>>>>>>>>>>>>> file it >>>>>>>>>>>>>> summarizes more of what I am recommending here. ย Also try to >>>>>>>>>>>>>> create >>>>>>>>>>>>>> a >>>>>>>>>>>>>> file that you may send should you fail to get connected. >>>>>>>>>>>>>> >>>>>>>>>>>>>> ## ย ย To make a logfile wvdial.out >>>>>>>>>>>>>> $ sudo wvdial 2>&1 | tee wvdial.out >>>>>>>>>>>>>> >>>>>>>>>>>>>> and attach wvdial.out to list. ย You may also read up on >>>>>>>>>>>>>> Jacques' >>>>>>>>>>>>>> post-install troubleshooting guide/howto : >>>>>>>>>>>>>> http://linmodems.technion.ac.il/post-install.html >>>>>>>>>>>>>> >>>>>>>>>>>>>> Regards, >>>>>>>>>>>>>> >>>>>>>>>>>>>> Antonio >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> 2009/4/24 Patompong Kumdang <u500910052@xxxxxx>: >>>>>>>>>>>>>>> Hello, >>>>>>>>>>>>>>> I'm Tour, Thailand >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> I cannot connect to internet by using my internal modem. >>>>>>>>>>>>>>> I use ubuntu 8.1 ย kernel 2.6.27-10-generic >>>>>>>>>>>>>>> when I connect, I can hear the dial tone like as connect by >>>>>>>>>>>>>>> windows, >>>>>>>>>>>>>>> But the sound that I hear not the same, It stop sound later. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> (I guss you ย know that I tell, my english not very well) >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> this is my wvdial.conf >>>>>>>>>>>>>>> ------------------------------------------- >>>>>>>>>>>>>>> root@tourcom-laptop:/home/tourcom# wvdialconf >>>>>>>>>>>>>>> /etc/wvdial.conf >>>>>>>>>>>>>>> Editing `/etc/wvdial.conf'. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Scanning your serial ports for a modem. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Modem Port Scan<*1>: S0 ย S1 ย S2 ย S3 >>>>>>>>>>>>>>> WvModem<*1>: Cannot get information for serial port. >>>>>>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 -- OK >>>>>>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 Z -- OK >>>>>>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 -- OK >>>>>>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK >>>>>>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK >>>>>>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK >>>>>>>>>>>>>>> ttySL0<*1>: Modem Identifier: ATI -- SmartLink Soft Modem >>>>>>>>>>>>>>> ttySL0<*1>: Speed 4800: AT -- OK >>>>>>>>>>>>>>> ttySL0<*1>: Speed 9600: AT -- OK >>>>>>>>>>>>>>> ttySL0<*1>: Speed 19200: AT -- OK >>>>>>>>>>>>>>> ttySL0<*1>: Speed 38400: AT -- OK >>>>>>>>>>>>>>> ttySL0<*1>: Speed 57600: AT -- OK >>>>>>>>>>>>>>> ttySL0<*1>: Speed 115200: AT -- OK >>>>>>>>>>>>>>> ttySL0<*1>: Speed 230400: AT -- OK >>>>>>>>>>>>>>> ttySL0<*1>: Speed 460800: AT -- OK >>>>>>>>>>>>>>> ttySL0<*1>: Max speed is 460800; that should be safe. >>>>>>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Found a modem on /dev/ttySL0. >>>>>>>>>>>>>>> Modem configuration written to /etc/wvdial.conf. >>>>>>>>>>>>>>> ttySL0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 >>>>>>>>>>>>>>> +FCLASS=0" >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> this is the script when I connect >>>>>>>>>>>>>>> ---------------------------------------------------------- >>>>>>>>>>>>>>> Script started on Sat 25 Apr 2009 09:48:30 AM ICT >>>>>>>>>>>>>>> ย ]0;root@tourcom-laptop: /home/tourcom >>>>>>>>>>>>>>> root@tourcom-laptop:/home/tourcom# >>>>>>>>>>>>>>> wvdial >>>>>>>>>>>>>>> --> WvDial: Internet dialer version 1.60 >>>>>>>>>>>>>>> --> Cannot get information for serial port. >>>>>>>>>>>>>>> --> Initializing modem. >>>>>>>>>>>>>>> --> Sending: ATZ >>>>>>>>>>>>>>> ATZ >>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>>>>>>>>>>>> ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>> --> Modem initialized. >>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>>>> --> No Carrier! ย Trying again. >>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>> ^CCaught signal 2: ย Attempting to exit gracefully... >>>>>>>>>>>>>>> --> Disconnecting at Sat Apr 25 09:49:42 2009 >>>>>>>>>>>>>>> ย ]0;root@tourcom-laptop: /home/tourcom >>>>>>>>>>>>>>> root@tourcom-laptop:/home/tourcom# >>>>>>>>>>>>>>> exit >>>>>>>>>>>>>>> exit >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Script done on Sat 25 Apr 2009 09:49:45 AM ICT >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> this is my wvdial.conf file >>>>>>>>>>>>>>> ------------------------------------- >>>>>>>>>>>>>>> [Dialer Defaults] >>>>>>>>>>>>>>> Modem = /dev/ttySL0 >>>>>>>>>>>>>>> Init1 = ATZ >>>>>>>>>>>>>>> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>>>>>>>>>>>> ;Stupid Mode = 1 >>>>>>>>>>>>>>> Modem Type = Analog Modem >>>>>>>>>>>>>>> Phone = 1222 >>>>>>>>>>>>>>> ISDN = 0 >>>>>>>>>>>>>>> Username = U89$0y)9@xxxxxxxxxxxxx >>>>>>>>>>>>>>> Carrier Check = no >>>>>>>>>>>>>>> Password = j4**9c+p >>>>>>>>>>>>>>> Baud = 460800 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> <div><br></div> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> <div><br></div> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> <div><br></div> >>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>> >>> >> >> > > >
