Tour
For the Intel537 do:
$ find /lib/modules --name Intel537*.ko
and delete any modules found.
There may also be residual Intel537 files like:
/etc/init.d/537_boot
/etc/hamregistry.bin
/usr/sbin/usrsound
/usr/sbin/hamregistry
that should be removed.
MarvS
2009/4/26 Patompong Kumdang <u500910052@xxxxxx>:
> hello,
> This time I will tell you more information about my computer.
>
>>>>Here above shows that you apparently used a USB modem with >>>device
> /dev/ttyACM0
>>>>that has nothing to do with the device that you apparently need to use
>>>>/dev/ttySL0
> I use mobile phone to connect to internet last week. (It can connect)
>
>
>>>>Here wlan0 is another interface that is not needed when you are trying
>>>>to connect with dialup.
>>>>It needs to be shut off to troubleshoot the dialup connection.
> I have wireless modem and lan card too, but I not use at this time.
>
>
>>>>What is this ?
>>>>Apr 20 14:45:38 tourcom-laptop kernel: [ 51.034653] Intel537:
>>>>disagrees about version of symbol struct_module
>>>>Apr 20 14:45:38 tourcom-laptop kernel: [ 51.081436] Intel537:
>>>>disagrees about version of symbol struct_module
> I don't know about this driver.
>
>
>
>>>>there seems to be an Intel537 driver on your system from some previous
> attempt,
>>>>which may be interfering.
>>>>Please uninstall/delete this driver from your System.
> I don't know how to remove this driver.
>
>
>
>>>>When attempting to
>>>>connect, open a terminal and type
>>>>$ sudo tail -f /var/log/messages
> I have got this message
>
> root@tourcom-laptop:/home/tourcom# sudo tail -f /var/log/messages
>
> Apr 27 07:19:32 tourcom-laptop kernel: [ 53.691210] [drm] Initialized
> drm 1.1.0 20060810
> Apr 27 07:19:32 tourcom-laptop kernel: [ 53.698167] pci 0000:00:02.0:
> PCI INT A -> GSI 16 (level, low) -> IRQ 16
> Apr 27 07:19:32 tourcom-laptop kernel: [ 53.699489] [drm] Initialized
> i915 1.6.0 20060119 on minor 0
> Apr 27 07:19:33 tourcom-laptop kernel: [ 54.444472] sky2 eth0: enabling
> interface
> Apr 27 07:19:33 tourcom-laptop kernel: [ 54.447579] ADDRCONF(NETDEV_UP):
> eth0: link is not ready
> Apr 27 07:19:37 tourcom-laptop pulseaudio[6044]: ltdl-bind-now.c: Failed
> to find original dlopen loader.
> Apr 27 07:19:37 tourcom-laptop pulseaudio[6047]: main.c:
> setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
> Apr 27 07:19:37 tourcom-laptop pulseaudio[6047]: main.c:
> setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted
> Apr 27 07:27:37 tourcom-laptop kernel: [ 538.346544] sky2 eth0: disabling
> interface
> Apr 27 07:31:26 tourcom-laptop kernel: [ 766.852013] ALSA
> /usr/src/modules/alsa/alsa-driver-1.0.16/pci/hda/hda_intel.c:634:
> hda_intel: azx_get_response timeout, switching to polling mode: last
> cmd=0x10490000
>
>
> I sent my new scanmodem data to you.
> please help me to follow the step that you advice with a command code.
>
> Thank you,
>
> Tour.
>
>
>
>
>> Tour,
>>
>> I looked back at your ModemData.txt sent a few days ago, it does not
>> agree with output from scanModem :(,
>>
>> http://www.nabble.com/Please-help-me-to-set-up-my-modem-to23204381.html
>>
>> In the scanModem that you sent the alsa version is 1.0.19, and with
>> the output messages that you sent it is 1.0.16 :
>>
>> Apr 24 16:19:38 tourcom-laptop kernel: [ 731.524013] ALSA
>> /usr/src/modules/alsa/alsa-driver-1.0.16/pci/hda/hda_intel.c:634:
>> hda_intel: azx_get_response timeout, switching to polling mode: last
>> cmd=0x10490000
>>
>> would you mind sending ModemData.txt again, re run scanModem and send
>> it back to list. It is hard to troubleshoot with too many things
>> going on.
>>
>> Regards,
>>
>> Antonio
>>
>> On 4/26/09, Antonio Olivares <olivares14031@xxxxxxxxx> wrote:
>>> Tour,
>>>
>>> I see too many interfaces interfering with your connection(s).
>>>
>>> Apr 25 17:31:34 tourcom-laptop kernel: [ 231.792507] PPP generic
>>> driver version 2.4.2
>>> Apr 25 17:31:34 tourcom-laptop pppd[6494]: pppd 2.4.4 started by root,
>>> uid
>>> 0
>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (BUSY)
>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (NO CARRIER)
>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (VOICE)
>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (NO DIALTONE)
>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (NO DIAL TONE)
>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (NO ANSWER)
>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (DELAYED)
>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: send (ATZ^M)
>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: expect (OK)
>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: ATZ^M^M
>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: OK
>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: -- got it
>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: send (ATDT#99^M)
>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: expect (CONNECT)
>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: ^M
>>> Apr 25 17:31:38 tourcom-laptop chat[6499]: ATDT#99^M^M
>>> Apr 25 17:31:38 tourcom-laptop chat[6499]: NO CARRIER
>>> Apr 25 17:31:38 tourcom-laptop chat[6499]: -- failed
>>> Apr 25 17:31:38 tourcom-laptop chat[6499]: Failed (NO CARRIER)
>>> Apr 25 17:31:39 tourcom-laptop pppd[6494]: Exit.
>>> Apr 25 17:35:17 tourcom-laptop pppd[6536]: pppd 2.4.4 started by root,
>>> uid
>>> 0
>>> Apr 25 17:35:17 tourcom-laptop pppd[6536]: Using interface ppp0
>>> Apr 25 17:35:17 tourcom-laptop pppd[6536]: Connect: ppp0 <-->
>>> /dev/ttyACM0
>>> Apr 25 17:35:36 tourcom-laptop pppd[6536]: Serial line is looped back.
>>> Apr 25 17:35:36 tourcom-laptop pppd[6536]: Connection terminated.
>>> Apr 25 17:35:36 tourcom-laptop pppd[6536]: Exit.
>>> Apr 25 17:37:38 tourcom-laptop pppd[6563]: pppd 2.4.4 started by root,
>>> uid
>>> 0
>>> Apr 25 17:37:38 tourcom-laptop pppd[6563]: Using interface ppp0
>>> Apr 25 17:37:38 tourcom-laptop pppd[6563]: Connect: ppp0 <-->
>>> /dev/ttyACM0
>>> Apr 25 17:37:56 tourcom-laptop pppd[6563]: Serial line is looped back.
>>> Apr 25 17:37:56 tourcom-laptop pppd[6563]: Connection terminated.
>>> Apr 25 17:37:56 tourcom-laptop pppd[6563]: Exit.
>>> Apr 25 17:39:19 tourcom-laptop pppd[6583]: pppd 2.4.4 started by root,
>>> uid
>>> 0
>>> Apr 25 17:39:19 tourcom-laptop pppd[6583]: Using interface ppp0
>>> Apr 25 17:39:19 tourcom-laptop pppd[6583]: Connect: ppp0 <-->
>>> /dev/ttyACM0
>>> Apr 25 17:39:24 tourcom-laptop pppd[6583]: PAP authentication succeeded
>>> Apr 25 17:39:24 tourcom-laptop kernel: [ 701.755111] PPP BSD
>>> Compression module registered
>>> Apr 25 17:39:24 tourcom-laptop kernel: [ 701.833370] PPP Deflate
>>> Compression module registered
>>> Apr 25 17:39:39 tourcom-laptop pppd[6583]: local IP address
>>> 10.174.152.18
>>> Apr 25 17:39:39 tourcom-laptop pppd[6583]: remote IP address 10.1.1.1
>>> Apr 25 17:39:39 tourcom-laptop pppd[6583]: primary DNS address
>>> 203.146.237.237
>>> Apr 25 17:39:39 tourcom-laptop pppd[6583]: secondary DNS address
>>> 202.149.24.5
>>> Apr 25 17:42:07 tourcom-laptop pppd[6583]: Terminating on signal 15
>>> Apr 25 17:42:07 tourcom-laptop pppd[6583]: Connect time 2.5 minutes.
>>> Apr 25 17:42:07 tourcom-laptop pppd[6583]: Sent 68036 bytes, received
>>> 263473 bytes.
>>> Apr 25 17:42:07 tourcom-laptop pppd[6583]: Connection terminated.
>>> Apr 25 17:42:07 tourcom-laptop pppd[6583]: Exit.
>>> Apr 25 17:42:15 tourcom-laptop kernel: [ 873.128154] usb 2-2: USB
>>> disconnect, address 2
>>>
>>> Here above shows that you apparently used a USB modem with device
>>> /dev/ttyACM0
>>> that has nothing to do with the device that you apparently need to use
>>> /dev/ttySL0
>>>
>>>
>>> Apr 24 22:05:24 tourcom-laptop pppd[6415]: pppd 2.4.4 started by root,
>>> uid
>>> 0
>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (BUSY)
>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (NO CARRIER)
>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (VOICE)
>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (NO DIALTONE)
>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (NO DIAL TONE)
>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (NO ANSWER)
>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (DELAYED)
>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: send (ATZ^M)
>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: expect (OK)
>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: ^M^M^MATZ^M^M
>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: OK
>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: -- got it
>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: send (ATDT1222^M)
>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: expect (CONNECT)
>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: ^M
>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: ATDT1222^M^M
>>> Apr 24 22:06:03 tourcom-laptop chat[6420]: NO CARRIER
>>> Apr 24 22:06:03 tourcom-laptop chat[6420]: -- failed
>>> Apr 24 22:06:03 tourcom-laptop chat[6420]: Failed (NO CARRIER)
>>> Apr 24 22:06:04 tourcom-laptop pppd[6415]: Exit.
>>> Apr 24 22:07:13 tourcom-laptop kernel: [ 380.500015] ALSA
>>> /usr/src/modules/alsa/alsa-driver-1.0.16/pci/hda/hda_intel.c:634:
>>> hda_intel: azx_get_response timeout, switching to polling mode: last
>>> cmd=0x10490000
>>> Apr 24 22:07:51 tourcom-laptop pppd[6443]: pppd 2.4.4 started by root,
>>> uid
>>> 0
>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (BUSY)
>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (NO CARRIER)
>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (VOICE)
>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (NO DIALTONE)
>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (NO DIAL TONE)
>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (NO ANSWER)
>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (DELAYED)
>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: send (ATZ^M)
>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: expect (OK)
>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: ^M^M^MATZ^M^M
>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: OK
>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: -- got it
>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: send (ATDT1222^M)
>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: expect (CONNECT)
>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: ^M
>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: ATDT1222^M^M
>>> Apr 24 22:08:30 tourcom-laptop chat[6445]: NO CARRIER
>>> Apr 24 22:08:30 tourcom-laptop chat[6445]: -- failed
>>> Apr 24 22:08:30 tourcom-laptop chat[6445]: Failed (NO CARRIER)
>>> Apr 24 22:08:31 tourcom-laptop pppd[6443]: Exit.
>>>
>>> Here wlan0 is another interface that is not needed when you are trying
>>> to connect with dialup.
>>> It needs to be shut off to troubleshoot the dialup connection.
>>>
>>> $ sudo ifconfig wlan0 down
>>> and all others too like eth0, eth1 etc.
>>>
>>>
>>> Apr 20 14:45:17 tourcom-laptop kernel: [ 22.526400] wlan0: ethernet
>>> device 00:16:cf:73:b1:97 using serialized NDIS driver: net5211,
>>> version: 0x40002, NDIS version: 0x501, vendor: 'NDIS Network Adapter',
>>> 168C:001A.5.conf
>>> Apr 20 14:45:17 tourcom-laptop kernel: [ 22.543385] acer-wmi: Acer
>>> Laptop ACPI-WMI Extras
>>> Apr 20 14:45:17 tourcom-laptop kernel: [ 22.568075] wlan0:
>>> encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK;
>>> AES/CCMP with WPA, WPA2, WPA2PSK
>>>
>>>
>>> What is this ?
>>>
>>> Apr 20 14:45:38 tourcom-laptop kernel: [ 51.034653] Intel537:
>>> disagrees about version of symbol struct_module
>>> Apr 20 14:45:38 tourcom-laptop kernel: [ 51.081436] Intel537:
>>> disagrees about version of symbol struct_module
>>>
>>> Intel537 modem?? too, Did not see that one when you sent
>>> ModemData.txt first.
>>>
>>>
>>> Apr 20 14:45:40 tourcom-laptop kernel: [ 53.644280] sky2 eth0:
>>> enabling interface
>>> Apr 20 14:45:40 tourcom-laptop kernel: [ 53.647244]
>>> ADDRCONF(NETDEV_UP): eth0: link is not ready
>>> Apr 20 14:45:42 tourcom-laptop kernel: [ 55.293253] sky2 eth0: Link
>>> is up at 100 Mbps, full duplex, flow control both
>>>
>>>
>>> Apr 20 18:23:18 tourcom-laptop kernel: [ 1837.606047] sky2 eth0: Link is
>>> down.
>>> Apr 20 18:23:20 tourcom-laptop kernel: [ 1839.206504] sky2 eth0: Link
>>> is up at 100 Mbps, full duplex, flow control both
>>> Apr 20 18:23:26 tourcom-laptop kernel: [ 1845.688796] sky2 eth0: Link is
>>> down.
>>> Apr 20 18:23:52 tourcom-laptop kernel: [ 1871.418303] sky2 eth0: Link
>>> is up at 100 Mbps, full duplex, flow control both
>>> Apr 20 18:34:19 tourcom-laptop kernel: [ 2498.381516] device eth0 left
>>> promiscuous mode
>>>
>>> Try one thing at a time. You are trying to do too much. If you want
>>> to connect with slmodemd use that and that only. When attempting to
>>> connect, open a terminal and type
>>> $ sudo tail -f /var/log/messages
>>>
>>> send only the parts when the connection is taking place and when it
>>> fails.
>>>
>>> Regards,
>>>
>>> Antonio
>>>
>>> On 4/26/09, Patompong Kumdang <u500910052@xxxxxx> wrote:
>>>> Hello,
>>>> I heve sent this log file to you.
>>>>
>>>> Thank you.
>>>>
>>>> Tour.
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>> Tour,
>>>>>
>>>>> Could you try to make a log file of your session
>>>>>
>>>>> $ sudo wvdial 2>&1 | tee wvdial.out
>>>>>
>>>>> send wvdial.out to us(list)
>>>>>
>>>>> and attach output of
>>>>> $ sudo tail -f var/log/messages
>>>>>
>>>>> Report back presently.
>>>>>
>>>>> Regards,
>>>>>
>>>>> Antonio
>>>>>
>>>>> 2009/4/25 Patompong Kumdang <u500910052@xxxxxx>:
>>>>>> Antonio,
>>>>>>
>>>>>> I don't know about how to choose driver to in stall,
>>>>>> I follow the step that Marv suggest.
>>>>>> My username and password is a free account in my country.(it's safe )
>>>>>> In windows I don't use a special command.
>>>>>> Now, I guess my modem can't sent signal to server.
>>>>>> Do you listen the file that I sent to you.
>>>>>
>>>>> Yes, I get typically the same sound when I dialup too!
>>>>>>
>>>>>> Thank you very much :)
>>>>>>
>>>>>>
>>>>>> Tour.
>>>>>>
>>>>>>
>>>>>>> TouR, Marv
>>>>>>>
>>>>>>> I don't know if this will make a difference, but since your using
>>>>>>> precompiled SLMODEMD with ALSA support, your alsa version is 1.0.19
>>>>>>> and there does not exist a 1.0.19 SLMODEMD.gcc4.3_alsa1.0.19.tar.gz.
>>>>>>> Marv will it make a difference if he needs a gcc4.3_alsa1.0.19
>>>>>>> SLMODEMD? He is having difficulties getting connected to internet.
>>>>>>> This email sent to Marv, and Jacques not to list so your username
>>>>>>> and
>>>>>>> password will be safe!
>>>>>>>
>>>>>>> TouR,
>>>>>>> my wvdial.conf file looks this way:
>>>>>>> [olivares@localhost ~]$ cat /etc/wvdial.conf
>>>>>>>
>>>>>>> [Dialer Defaults]
>>>>>>> Init2 = ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90
>>>>>>> Modem Type = Analog Modem
>>>>>>> Phone = 7072000
>>>>>>> ISDN = 0
>>>>>>> Username = myusername
>>>>>>> Init1 = ATZ
>>>>>>> Password = ************
>>>>>>> Modem = /dev/ttySL0
>>>>>>> Baud = 460800
>>>>>>> Carrier Check = No
>>>>>>> Stupid Mode = 1
>>>>>>>
>>>>>>> A SLMODEMD with alsa 1.0.19 might be his best bet? Don't know if
>>>>>>> this
>>>>>>> makes a difference, but why not ask?
>>>>>>>
>>>>>>> http://linmodems.technion.ac.il/packages/smartlink/
>>>>>>>
>>>>>>> Here's your wvdial.con
>>>>>>> this is my wvdial.conf file
>>>>>>> -------------------------------------
>>>>>>> [Dialer Defaults]
>>>>>>> Modem = /dev/ttySL0
>>>>>>> Init1 = ATZ
>>>>>>> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
>>>>>>> ;Stupid Mode = 1
>>>>>>> Modem Type = Analog Modem
>>>>>>> Phone = 1222
>>>>>>> ISDN = 0
>>>>>>> Username = U89$0y)9@xxxxxxxxxxxxx
>>>>>>> Carrier Check = no
>>>>>>> Password = j4**9c+p
>>>>>>> Baud = 460800
>>>>>>>
>>>>>>> Jacques, is a username allow characters like ")" in wvdial.conf ?
>>>>>>> U89$0y)9@xxxxxxxxxxxxx ?
>>>>>>>
>>>>>>> I am looking for what your ISP requires, but can't seem to find
>>>>>>> anything.
>>>>>>>
>>>>>>> http://www.tot.co.th/toten/index.php?option=com_content&task=view&id=363&Itemid=1121
>>>>>>>
>>>>>>>
>>>>>>> TouR
>>>>>>> Do you use any special commands or strings to connect via windows?
>>>>>>> It is strange that the connection can't seem to get through?
>>>>>>>
>>>>>>> 2009/4/25 Patompong Kumdang <u500910052@xxxxxx>:
>>>>>>>>
>>>>>>>> Antonio,
>>>>>>>>
>>>>>>>> Thanks. for your help. :)
>>>>>>>>
>>>>>>>> I try to modify wvdial.conf, But it has the same problem.
>>>>>>>> I attach file that contain the sound that I hear when connect
>>>>>>>> using ubuntu (001.wav) and using windows (003.wav)(windows can
>>>>>>>> connect)
>>>>>>>> I guess my modem can't sent information to server?
>>>>>>>>
>>>>>>>> and this is my log file
>>>>>>>>
>>>>>>>>
>>>>>>>> ----------------------------------------------------------
>>>>>>>> Baud = 57,600 , +MS=34
>>>>>>>> ----------------------------------------------------------
>>>>>>>> --> WvDial: Internet dialer version 1.60
>>>>>>>> --> Cannot get information for serial port.
>>>>>>>> --> Initializing modem.
>>>>>>>> --> Sending: ATZ
>>>>>>>> ATZ
>>>>>>>> OK
>>>>>>>> --> Sending: ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=34
>>>>>>>> ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=34
>>>>>>>> OK
>>>>>>>> --> Modem initialized.
>>>>>>>> --> Sending: ATDT1222
>>>>>>>> --> Waiting for carrier.
>>>>>>>> ATDT1222
>>>>>>>> NO CARRIER
>>>>>>>> --> No Carrier! Trying again.
>>>>>>>> --> Sending: ATDT1222
>>>>>>>> --> Waiting for carrier.
>>>>>>>> ATDT1222
>>>>>>>> --> Timed out while dialing. Trying again.
>>>>>>>> --> Sending: ATDT1222
>>>>>>>> --> Waiting for carrier.
>>>>>>>> NO CARRIER
>>>>>>>> ATDT1222
>>>>>>>> --> No Carrier! Trying again.
>>>>>>>> --> Sending: ATDT1222
>>>>>>>> --> Waiting for carrier.
>>>>>>>> NO CARRIER
>>>>>>>> ATDT1222
>>>>>>>> --> No Carrier! Trying again.
>>>>>>>> --> Sending: ATDT1222
>>>>>>>> --> Waiting for carrier.
>>>>>>>> NO CARRIER
>>>>>>>> ATDT1222
>>>>>>>> --> No Carrier! Trying again.
>>>>>>>> --> Sending: ATDT1222
>>>>>>>> --> Waiting for carrier.
>>>>>>>> NO CARRIER
>>>>>>>>
>>>>>>>>
>>>>>>>> ------------------------------------------------------------------
>>>>>>>> Baud = 57,600 ,+MS=90
>>>>>>>> ------------------------------------------------------------------
>>>>>>>> --> WvDial: Internet dialer version 1.60
>>>>>>>> --> Cannot get information for serial port.
>>>>>>>> --> Initializing modem.
>>>>>>>> --> Sending: ATZ
>>>>>>>> ATZ
>>>>>>>> OK
>>>>>>>> --> Sending: ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90
>>>>>>>> ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90
>>>>>>>> OK
>>>>>>>> --> Modem initialized.
>>>>>>>> --> Sending: ATDT1222
>>>>>>>> --> Waiting for carrier.
>>>>>>>> ATDT1222
>>>>>>>> NO CARRIER
>>>>>>>> --> No Carrier! Trying again.
>>>>>>>> --> Sending: ATDT1222
>>>>>>>> --> Waiting for carrier.
>>>>>>>> ATDT1222
>>>>>>>>
>>>>>>>>
>>>>>>>> ------------------------------------------------
>>>>>>>> Baud = 115,200 , +MS=90
>>>>>>>> ------------------------------------------------
>>>>>>>> --> WvDial: Internet dialer version 1.60
>>>>>>>> --> Cannot get information for serial port.
>>>>>>>> --> Initializing modem.
>>>>>>>> --> Sending: ATZ
>>>>>>>> ATZ
>>>>>>>> OK
>>>>>>>> --> Sending: ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90
>>>>>>>> ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90
>>>>>>>> OK
>>>>>>>> --> Modem initialized.
>>>>>>>> --> Sending: ATDT1222
>>>>>>>> --> Waiting for carrier.
>>>>>>>> ATDT1222
>>>>>>>> NO CARRIER
>>>>>>>> --> No Carrier! Trying again.
>>>>>>>> --> Sending: ATDT1222
>>>>>>>> --> Waiting for carrier.
>>>>>>>> ATDT1222
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> ---------------------------------------------------------
>>>>>>>> Baud = 115,200 , +MS=34
>>>>>>>> ---------------------------------------------------------
>>>>>>>> --> WvDial: Internet dialer version 1.60
>>>>>>>> --> Cannot get information for serial port.
>>>>>>>> --> Initializing modem.
>>>>>>>> --> Sending: ATZ
>>>>>>>> ATZ
>>>>>>>> OK
>>>>>>>> --> Sending: ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=34
>>>>>>>> ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=34
>>>>>>>> OK
>>>>>>>> --> Modem initialized.
>>>>>>>> --> Sending: ATDT1222
>>>>>>>> --> Waiting for carrier.
>>>>>>>> ATDT1222
>>>>>>>> NO CARRIER
>>>>>>>> --> No Carrier! Trying again.
>>>>>>>> --> Sending: ATDT1222
>>>>>>>> --> Waiting for carrier.
>>>>>>>> ATDT1222
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> ------------------------------------------------------------------
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>> Tour,
>>>>>>>>>
>>>>>>>>> Try to modify wvdial.conf from
>>>>>>>>> [Dialer Defaults]
>>>>>>>>> Modem = /dev/ttySL0
>>>>>>>>> Init1 = ATZ
>>>>>>>>> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
>>>>>>>>> ;Stupid Mode = 1
>>>>>>>>> Modem Type = Analog Modem
>>>>>>>>> Phone = 1222
>>>>>>>>> ISDN = 0
>>>>>>>>> Username = U89$0y)9@xxxxxxxxxxxxx
>>>>>>>>> Carrier Check = no
>>>>>>>>> Password = ********** <--- change this to ***** be careful with
>>>>>>>>> passwords others can take advantage when posting to list
>>>>>>>>> Baud = 460800
>>>>>>>>> to
>>>>>>>>> [Dialer Defaults]
>>>>>>>>> Modem = /dev/ttySL0
>>>>>>>>> Init1 = ATZ
>>>>>>>>> Init2 = ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90 <--- add X3 option to
>>>>>>>>> skip dialtone checking, and add +MS=90 you may try +MS=34 if
>>>>>>>>> +MS=90
>>>>>>>>> does not help you get connected
>>>>>>>>> Modem Type = Analog Modem
>>>>>>>>> Phone = 1222
>>>>>>>>> Baud = 460800 <---- you can also try lower bauds like 115,200 or
>>>>>>>>> 57,600 in case it is needed.
>>>>>>>>> ISDN = 0
>>>>>>>>> Username = U89$0y)9@xxxxxxxxxxxxx
>>>>>>>>> Password = **********
>>>>>>>>> Carrier Check = no
>>>>>>>>> Stupid Mode = 1 <--- remove the ";", it might help get you
>>>>>>>>> connected
>>>>>>>>>
>>>>>>>>> Try that and report back. Also, if for any reason you do not get
>>>>>>>>> connected, try reading the DOCs/wvdial.txt file. In that file it
>>>>>>>>> summarizes more of what I am recommending here. Also try to
>>>>>>>>> create
>>>>>>>>> a
>>>>>>>>> file that you may send should you fail to get connected.
>>>>>>>>>
>>>>>>>>> ## To make a logfile wvdial.out
>>>>>>>>> $ sudo wvdial 2>&1 | tee wvdial.out
>>>>>>>>>
>>>>>>>>> and attach wvdial.out to list. You may also read up on Jacques'
>>>>>>>>> post-install troubleshooting guide/howto :
>>>>>>>>> http://linmodems.technion.ac.il/post-install.html
>>>>>>>>>
>>>>>>>>> Regards,
>>>>>>>>>
>>>>>>>>> Antonio
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> 2009/4/24 Patompong Kumdang <u500910052@xxxxxx>:
>>>>>>>>>> Hello,
>>>>>>>>>> I'm Tour, Thailand
>>>>>>>>>>
>>>>>>>>>> I cannot connect to internet by using my internal modem.
>>>>>>>>>> I use ubuntu 8.1 kernel 2.6.27-10-generic
>>>>>>>>>> when I connect, I can hear the dial tone like as connect by
>>>>>>>>>> windows,
>>>>>>>>>> But the sound that I hear not the same, It stop sound later.
>>>>>>>>>>
>>>>>>>>>> (I guss you know that I tell, my english not very well)
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> this is my wvdial.conf
>>>>>>>>>> -------------------------------------------
>>>>>>>>>> root@tourcom-laptop:/home/tourcom# wvdialconf /etc/wvdial.conf
>>>>>>>>>> Editing `/etc/wvdial.conf'.
>>>>>>>>>>
>>>>>>>>>> Scanning your serial ports for a modem.
>>>>>>>>>>
>>>>>>>>>> Modem Port Scan<*1>: S0 S1 S2 S3
>>>>>>>>>> WvModem<*1>: Cannot get information for serial port.
>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 -- OK
>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 Z -- OK
>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 -- OK
>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
>>>>>>>>>> ttySL0<*1>: Modem Identifier: ATI -- SmartLink Soft Modem
>>>>>>>>>> ttySL0<*1>: Speed 4800: AT -- OK
>>>>>>>>>> ttySL0<*1>: Speed 9600: AT -- OK
>>>>>>>>>> ttySL0<*1>: Speed 19200: AT -- OK
>>>>>>>>>> ttySL0<*1>: Speed 38400: AT -- OK
>>>>>>>>>> ttySL0<*1>: Speed 57600: AT -- OK
>>>>>>>>>> ttySL0<*1>: Speed 115200: AT -- OK
>>>>>>>>>> ttySL0<*1>: Speed 230400: AT -- OK
>>>>>>>>>> ttySL0<*1>: Speed 460800: AT -- OK
>>>>>>>>>> ttySL0<*1>: Max speed is 460800; that should be safe.
>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
>>>>>>>>>>
>>>>>>>>>> Found a modem on /dev/ttySL0.
>>>>>>>>>> Modem configuration written to /etc/wvdial.conf.
>>>>>>>>>> ttySL0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2
>>>>>>>>>> +FCLASS=0"
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> this is the script when I connect
>>>>>>>>>> ----------------------------------------------------------
>>>>>>>>>> Script started on Sat 25 Apr 2009 09:48:30 AM ICT
>>>>>>>>>> ]0;root@tourcom-laptop: /home/tourcom
>>>>>>>>>> root@tourcom-laptop:/home/tourcom#
>>>>>>>>>> wvdial
>>>>>>>>>> --> WvDial: Internet dialer version 1.60
>>>>>>>>>> --> Cannot get information for serial port.
>>>>>>>>>> --> Initializing modem.
>>>>>>>>>> --> Sending: ATZ
>>>>>>>>>> ATZ
>>>>>>>>>> OK
>>>>>>>>>> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
>>>>>>>>>> ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
>>>>>>>>>> OK
>>>>>>>>>> --> Modem initialized.
>>>>>>>>>> --> Sending: ATDT1222
>>>>>>>>>> --> Waiting for carrier.
>>>>>>>>>> ATDT1222
>>>>>>>>>> NO CARRIER
>>>>>>>>>> --> No Carrier! Trying again.
>>>>>>>>>> --> Sending: ATDT1222
>>>>>>>>>> --> Waiting for carrier.
>>>>>>>>>> ATDT1222
>>>>>>>>>> ^CCaught signal 2: Attempting to exit gracefully...
>>>>>>>>>> --> Disconnecting at Sat Apr 25 09:49:42 2009
>>>>>>>>>> ]0;root@tourcom-laptop: /home/tourcom
>>>>>>>>>> root@tourcom-laptop:/home/tourcom#
>>>>>>>>>> exit
>>>>>>>>>> exit
>>>>>>>>>>
>>>>>>>>>> Script done on Sat 25 Apr 2009 09:49:45 AM ICT
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> this is my wvdial.conf file
>>>>>>>>>> -------------------------------------
>>>>>>>>>> [Dialer Defaults]
>>>>>>>>>> Modem = /dev/ttySL0
>>>>>>>>>> Init1 = ATZ
>>>>>>>>>> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
>>>>>>>>>> ;Stupid Mode = 1
>>>>>>>>>> Modem Type = Analog Modem
>>>>>>>>>> Phone = 1222
>>>>>>>>>> ISDN = 0
>>>>>>>>>> Username = U89$0y)9@xxxxxxxxxxxxx
>>>>>>>>>> Carrier Check = no
>>>>>>>>>> Password = j4**9c+p
>>>>>>>>>> Baud = 460800
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>> <div><br></div>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>> <div><br></div>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>> <div><br></div>
>>>>>
>>>>>
>>>>
>>>
>>
>>
>
