Bjorn Re: Perhaps agrsm is worth a shot? That is a good suggestion. Certainly will do no harm. Tour, FIrst install the Ubuntu package dkms. Then from http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ get the dkms-agrsm_2.1.80-6_i386.deb, agrsm-howto.txt and agrsm-tools_0.0.1_all.deb . Install the .deb packages with $ sudo dpkg -i dkms*.deb agrsm*.deb which hopefully will culminate in the modem being detected. For understanding See the example at http://linmodems.technion.ac.il/bigarch/archive-eighth/msg03863.html The dkms toolset automates compiling, including compiling of needed update drivers MarvS On Tue, Apr 28, 2009 at 7:11 AM, Bjorn Wielens <Uniacke1@xxxxxxxx> wrote: > Hi Marv, > I don't have such a modem, but this may be useful for later: > The agrsm packages with support for 11c11040 have the following > supported devices: > Note that the 11c11040 is not directly listed, but is identified through > the audio card ID. Pennnrhaps agrsm is worth a shot? > > { 0x11C1, 0x0620, 0x0000, 0x0000 }, > { 0x1039, 0x7013, 0x0000, 0x0000 }, > { 0x1106, 0x3068, 0x0000, 0x0000 }, > { 0x8086, 0x2668, 0x0000, 0x0000 }, //ich6 hda > { 0x8086, 0x27D8, 0x0000, 0x0000 }, //ich7 hda > { 0x8086, 0x284B, 0x0000, 0x0000 }, //ich8 hda > { 0x8086, 0x269a, 0x0000, 0x0000 }, /* ESB2 */ > { 0x8086, 0x293e, 0x0000, 0x0000 }, /* ICH9 */ > { 0x8086, 0x293f, 0x0000, 0x0000 }, /* ICH9 */ > { 0x1002, 0x437b, 0x0000, 0x0000 }, /* ATI SB450 */ > { 0x1002, 0x4383, 0x0000, 0x0000 }, /* ATI SB600 */ > { 0x1002, 0x793b, 0x0000, 0x0000 }, /* ATI RS600 HDMI */ > { 0x1002, 0x7919, 0x0000, 0x0000 }, /* ATI RS690 HDMI */ > { 0x1002, 0x960c, 0x0000, 0x0000 }, /* ATI RS780 HDMI */ > { 0x1002, 0xaa00, 0x0000, 0x0000 }, /* ATI R600 HDMI */ > { 0x1106, 0x3288, 0x0000, 0x0000 }, /* VIA VT8251/VT8237A */ > { 0x1039, 0x7502, 0x0000, 0x0000 }, /* SIS966 */ > { 0x10b9, 0x5461, 0x0000, 0x0000 }, /* ULI M5461 */ > { 0x10de, 0x026c, 0x0000, 0x0000 }, /* NVIDIA MCP51 */ > { 0x10de, 0x0371, 0x0000, 0x0000 }, /* NVIDIA MCP55 */ > { 0x10de, 0x03e4, 0x0000, 0x0000 }, /* NVIDIA MCP61 */ > { 0x10de, 0x03f0, 0x0000, 0x0000 }, /* NVIDIA MCP61 */ > { 0x10de, 0x044a, 0x0000, 0x0000 }, /* NVIDIA MCP65 */ > { 0x10de, 0x044b, 0x0000, 0x0000 }, /* NVIDIA MCP65 */ > { 0x10de, 0x055c, 0x0000, 0x0000 }, /* NVIDIA MCP67 */ > { 0x10de, 0x055d, 0x0000, 0x0000 }, /* NVIDIA MCP67 */ > { 0x8086, 0x2416, 0x0000, 0x0000 }, > { 0x8086, 0x2426, 0x0000, 0x0000 }, > { 0x8086, 0x2446, 0x0000, 0x0000 }, > { 0x8086, 0x7196, 0x0000, 0x0000 }, > { 0x8086, 0x2486, 0x0000, 0x0000 }, > { 0x8086, 0x24C6, 0x0000, 0x0000 }, > { 0x8086, 0x24D6, 0x0000, 0x0000 }, > { 0x11C1, 0x048C, 0x0000, 0x0000 }, > { 0x11C1, 0x048F, 0x0000, 0x0000 }, > { 0x8086, 0x266D, 0x0000, 0x0000 }, > > Bjorn. > > > Marvin Stodolsky wrote: >> List, >> >> Would any of you with the Agere 0x11c13026 modem chip, hosted on a >> High Definition Audio (HDA)card please report in. What are the >> specifics of HDA card, kernel and do you have modem functionality. >> >> Marv S >> >> >> 2009/4/27 Patompong Kumdang <u500910052@xxxxxx>: >>> Antonio, MarvS >>> >>> Can I try another way to connect to internet. >>> >>> Tour. >>> >>> >>> >>>> The MS drivers provide no additional useful information, beyond that >>>> of the ModemData.txt >>>> More this evening. >>>> >>>> MarvS >>>> >>>> 2009/4/27 Patompong Kumdang <u500910052@xxxxxx>: >>>>> Antonio, MarvS >>>>> >>>>> Sorry, ftp://u500910052@xxxxxxxxxxx/public_html/Modem.zip is broken. >>>>> >>>>> Please use this link to download again. >>>>> http://mail.cm.edu/~u500910052/Modem.zip >>>>> >>>>> Thanks, >>>>> Tour. >>>>> >>>>> >>>>> >>>>> >>>>>> Antonio, MarvS >>>>>> >>>>>> Can this windows driver tell you more information about my modem. >>>>>> please download these file at: >>>>>> ftp://u500910052@xxxxxxxxxxx/public_html/Modem.zip >>>>>> (sorry, my mail can not sent .zip file) >>>>>> >>>>>> Thanks, >>>>>> Tour. >>>>>> >>>>>> >>>>>> >>>>>>> Antonio >>>>>>> >>>>>>> "The ALSA verion is 1.0.19" output from the scanModem script is from a >>>>>>> call: >>>>>>> ย ย aplay --version >>>>>>> and this is typically matched with other ALSA components of an >>>>>>> installation. >>>>>>> >>>>>>> On the Ubuntu Jaunty I just upgraded to: >>>>>>> ย ย ย aplay --version >>>>>>> aplay: version 1.0.18 by Jaroslav Kysela <perex@xxxxxxxx> >>>>>>> So if is indeed puzzling as to why TouRs is 1.0.19 >>>>>>> >>>>>>> TourR, >>>>>>> ย ย Have you done any cogent alternations to your System. >>>>>>> >>>>>>> MarvS >>>>>>> >>>>>>> >>>>>>> On Sun, Apr 26, 2009 at 10:05 PM, Antonio Olivares >>>>>>> <olivares14031@xxxxxxxxx> wrote: >>>>>>>> Tour and Marv, >>>>>>>> >>>>>>>> I am trying to follow this carefully seeing where I can help, I see a >>>>>>>> problem here and I do not know why this is happening? >>>>>>>> >>>>>>>> /usr/src/modules/alsa/alsa-driver-1.0.16/pci/hda/hda_intel.c:634: >>>>>>>> เธขย hda_intel: azx_get_response timeout, switching to polling mode: >>>>>>>> last >>>>>>>> เธขย cmd=0x10490000 >>>>>>>> >>>>>>>> With the old ModemData.txt and the new one just sent, the alsa >>>>>>>> version >>>>>>>> is 1.0.19. เธขย This does not make sense. >>>>>>>> >>>>>>>> ===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== >>>>>>>> The ALSA packages provide audio support and also drivers for some >>>>>>>> modems. >>>>>>>> ALSA diagnostics are written during bootup to /proc/asound/ folders. >>>>>>>> >>>>>>>> The ALSA verion is 1.0.19 >>>>>>>> The modem cards detected by "aplay -l" เธขย are: >>>>>>>> card 0: Intel [HDA Intel], device 6: Si3054 Modem [Si3054 Modem] >>>>>>>> >>>>>>>> The /proc/asound/pcm file reports: >>>>>>>> ----------------------- >>>>>>>> 00-00: ALC883 Analog : ALC883 Analog : playback 1 : capture 1 >>>>>>>> 00-01: ALC883 Digital : ALC883 Digital : playback 1 >>>>>>>> 00-02: ALC883 Analog : ALC883 Analog : capture 1 >>>>>>>> 00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1 >>>>>>>> >>>>>>>> about /proc/asound/cards: >>>>>>>> ------------------------ >>>>>>>> เธขย 0 [Intel เธขย เธขย เธขย เธขย เธขย ]: HDA-Intel - HDA Intel >>>>>>>> เธขย เธขย เธขย เธขย เธขย เธขย เธขย เธขย เธขย เธขย เธขย HDA >>>>>>>> Intel at 0xd0340000 irq 22 >>>>>>>> >>>>>>>> เธขย PCI slot 00:1b.0 has a High Definition Audio Card >>>>>>>> เธขย The drivers are in the kernel modules tree at: >>>>>>>> เธขย /lib/modules/2.6.27-10-generic/kernel/sound/pci/hda/snd-hda-intel.ko >>>>>>>> /lib/modules/2.6.27-11-generic/kernel/sound/pci/hda/snd-hda-intel.ko >>>>>>>> /lib/modules/2.6.27-11-server/kernel/sound/pci/hda/snd-hda-intel.ko >>>>>>>> เธขย The modem codec file for the HDA card is: >>>>>>>> /proc/asound/card0/codec#1 >>>>>>>> >>>>>>>> >>>>>>>> I am thinking also since the alsa-version is 1.0.19, shouldn't the >>>>>>>> precompiled SLMODEMD.gcc4.3.tar.gz serve, a new one with >>>>>>>> -alsa-1.0.19.tar.gz probably needs to be created? >>>>>>>> >>>>>>>> My $0.02 >>>>>>>> >>>>>>>> Regards, >>>>>>>> >>>>>>>> Antonio >>>>>>>> >>>>>>>> On 4/27/09, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> wrote: >>>>>>>>> Tour >>>>>>>>> >>>>>>>>> For the Intel537 do: >>>>>>>>> >>>>>>>>> $ find /lib/modules --name Intel537*.ko >>>>>>>>> and delete any modules found. >>>>>>>>> >>>>>>>>> There may also be residual Intel537 files like: >>>>>>>>> เธขย เธขย เธขย /etc/init.d/537_boot >>>>>>>>> เธขย เธขย เธขย /etc/hamregistry.bin >>>>>>>>> เธขย เธขย เธขย /usr/sbin/usrsound >>>>>>>>> เธขย เธขย เธขย /usr/sbin/hamregistry >>>>>>>>> that should be removed. >>>>>>>>> >>>>>>>>> MarvS >>>>>>>>> >>>>>>>>> 2009/4/26 Patompong Kumdang <u500910052@xxxxxx>: >>>>>>>>>> hello, >>>>>>>>>> This time I will tell you more information about my computer. >>>>>>>>>> >>>>>>>>>>>>> Here above shows that you apparently used a USB modem with >>>>>>>>>>>>>>>> device >>>>>>>>>> /dev/ttyACM0 >>>>>>>>>>>>> that has nothing to do with the device that you apparently need >>>>>>>>>>>>> to >>>>>>>>>>>>> use >>>>>>>>>>>>> /dev/ttySL0 >>>>>>>>>> I use mobile phone to connect to internet last week. (It can >>>>>>>>>> connect) >>>>>>>>>> >>>>>>>>>> >>>>>>>>>>>>> Here wlan0 is another interface that is not needed when you are >>>>>>>>>>>>> trying >>>>>>>>>>>>> to connect with dialup. >>>>>>>>>>>>> It needs to be shut off to troubleshoot the dialup connection. >>>>>>>>>> I have wireless modem and lan card too, but I not use at this time. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>>>>> What is this ? >>>>>>>>>>>>> Apr 20 14:45:38 tourcom-laptop kernel: [ เธขย 51.034653] >>>>>>>>>>>>> Intel537: >>>>>>>>>>>>> disagrees about version of symbol struct_module >>>>>>>>>>>>> Apr 20 14:45:38 tourcom-laptop kernel: [ เธขย 51.081436] >>>>>>>>>>>>> Intel537: >>>>>>>>>>>>> disagrees about version of symbol struct_module >>>>>>>>>> I don't know about this driver. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>>>>> there seems to be an Intel537 driver on your system from some >>>>>>>>>>>>> previous >>>>>>>>>> attempt, >>>>>>>>>>>>> which may be interfering. >>>>>>>>>>>>> Please uninstall/delete this driver from your System. >>>>>>>>>> I don't know how to remove this driver. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>>>>> When attempting to >>>>>>>>>>>>> connect, open a terminal and type >>>>>>>>>>>>> $ sudo tail -f /var/log/messages >>>>>>>>>> I have got this message >>>>>>>>>> >>>>>>>>>> root@tourcom-laptop:/home/tourcom# sudo tail -f /var/log/messages >>>>>>>>>> >>>>>>>>>> Apr 27 07:19:32 tourcom-laptop kernel: [ เธขย 53.691210] [drm] >>>>>>>>>> Initialized >>>>>>>>>> drm 1.1.0 20060810 >>>>>>>>>> Apr 27 07:19:32 tourcom-laptop kernel: [ เธขย 53.698167] pci >>>>>>>>>> 0000:00:02.0: >>>>>>>>>> PCI INT A -> GSI 16 (level, low) -> IRQ 16 >>>>>>>>>> Apr 27 07:19:32 tourcom-laptop kernel: [ เธขย 53.699489] [drm] >>>>>>>>>> Initialized >>>>>>>>>> i915 1.6.0 20060119 on minor 0 >>>>>>>>>> Apr 27 07:19:33 tourcom-laptop kernel: [ เธขย 54.444472] sky2 >>>>>>>>>> eth0: >>>>>>>>>> enabling >>>>>>>>>> interface >>>>>>>>>> Apr 27 07:19:33 tourcom-laptop kernel: [ เธขย 54.447579] >>>>>>>>>> ADDRCONF(NETDEV_UP): >>>>>>>>>> eth0: link is not ready >>>>>>>>>> Apr 27 07:19:37 tourcom-laptop pulseaudio[6044]: ltdl-bind-now.c: >>>>>>>>>> Failed >>>>>>>>>> to find original dlopen loader. >>>>>>>>>> Apr 27 07:19:37 tourcom-laptop pulseaudio[6047]: main.c: >>>>>>>>>> setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted >>>>>>>>>> Apr 27 07:19:37 tourcom-laptop pulseaudio[6047]: main.c: >>>>>>>>>> setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted >>>>>>>>>> Apr 27 07:27:37 tourcom-laptop kernel: [ เธขย 538.346544] sky2 >>>>>>>>>> eth0: >>>>>>>>>> disabling >>>>>>>>>> interface >>>>>>>>>> Apr 27 07:31:26 tourcom-laptop kernel: [ เธขย 766.852013] ALSA >>>>>>>>>> /usr/src/modules/alsa/alsa-driver-1.0.16/pci/hda/hda_intel.c:634: >>>>>>>>>> hda_intel: azx_get_response timeout, switching to polling mode: >>>>>>>>>> last >>>>>>>>>> cmd=0x10490000 >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> I sent my new scanmodem data to you. >>>>>>>>>> please help me to follow the step that you advice with a command >>>>>>>>>> code. >>>>>>>>>> >>>>>>>>>> Thank you, >>>>>>>>>> >>>>>>>>>> Tour. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>>> Tour, >>>>>>>>>>> >>>>>>>>>>> I looked back at your ModemData.txt sent a few days ago, it does >>>>>>>>>>> not >>>>>>>>>>> agree with output from scanModem :(, >>>>>>>>>>> >>>>>>>>>>> http://www.nabble.com/Please-help-me-to-set-up-my-modem-to23204381.html >>>>>>>>>>> >>>>>>>>>>> In the scanModem that you sent the alsa version is 1.0.19, and >>>>>>>>>>> with >>>>>>>>>>> the output messages that you sent it is 1.0.16 : >>>>>>>>>>> >>>>>>>>>>> Apr 24 16:19:38 tourcom-laptop kernel: [ เธขย 731.524013] ALSA >>>>>>>>>>> /usr/src/modules/alsa/alsa-driver-1.0.16/pci/hda/hda_intel.c:634: >>>>>>>>>>> hda_intel: azx_get_response timeout, switching to polling mode: >>>>>>>>>>> last >>>>>>>>>>> cmd=0x10490000 >>>>>>>>>>> >>>>>>>>>>> would you mind sending ModemData.txt again, re run scanModem and >>>>>>>>>>> send >>>>>>>>>>> it back to list. เธขย It is hard to troubleshoot with too many >>>>>>>>>>> things >>>>>>>>>>> going on. >>>>>>>>>>> >>>>>>>>>>> Regards, >>>>>>>>>>> >>>>>>>>>>> Antonio >>>>>>>>>>> >>>>>>>>>>> On 4/26/09, Antonio Olivares <olivares14031@xxxxxxxxx> wrote: >>>>>>>>>>>> Tour, >>>>>>>>>>>> >>>>>>>>>>>> I see too many interfaces interfering with your connection(s). >>>>>>>>>>>> >>>>>>>>>>>> Apr 25 17:31:34 tourcom-laptop kernel: [ เธขย 231.792507] PPP >>>>>>>>>>>> generic >>>>>>>>>>>> driver version 2.4.2 >>>>>>>>>>>> Apr 25 17:31:34 tourcom-laptop pppd[6494]: pppd 2.4.4 started by >>>>>>>>>>>> root, >>>>>>>>>>>> uid >>>>>>>>>>>> 0 >>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (BUSY) >>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (NO CARRIER) >>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (VOICE) >>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (NO DIALTONE) >>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (NO DIAL >>>>>>>>>>>> TONE) >>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (NO ANSWER) >>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (DELAYED) >>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: send (ATZ^M) >>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: expect (OK) >>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: ATZ^M^M >>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: OK >>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: เธขย -- got it >>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: send (ATDT#99^M) >>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: expect (CONNECT) >>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: ^M >>>>>>>>>>>> Apr 25 17:31:38 tourcom-laptop chat[6499]: ATDT#99^M^M >>>>>>>>>>>> Apr 25 17:31:38 tourcom-laptop chat[6499]: NO CARRIER >>>>>>>>>>>> Apr 25 17:31:38 tourcom-laptop chat[6499]: เธขย -- failed >>>>>>>>>>>> Apr 25 17:31:38 tourcom-laptop chat[6499]: Failed (NO CARRIER) >>>>>>>>>>>> Apr 25 17:31:39 tourcom-laptop pppd[6494]: Exit. >>>>>>>>>>>> Apr 25 17:35:17 tourcom-laptop pppd[6536]: pppd 2.4.4 started by >>>>>>>>>>>> root, >>>>>>>>>>>> uid >>>>>>>>>>>> 0 >>>>>>>>>>>> Apr 25 17:35:17 tourcom-laptop pppd[6536]: Using interface ppp0 >>>>>>>>>>>> Apr 25 17:35:17 tourcom-laptop pppd[6536]: Connect: ppp0 <--> >>>>>>>>>>>> /dev/ttyACM0 >>>>>>>>>>>> Apr 25 17:35:36 tourcom-laptop pppd[6536]: Serial line is looped >>>>>>>>>>>> back. >>>>>>>>>>>> Apr 25 17:35:36 tourcom-laptop pppd[6536]: Connection terminated. >>>>>>>>>>>> Apr 25 17:35:36 tourcom-laptop pppd[6536]: Exit. >>>>>>>>>>>> Apr 25 17:37:38 tourcom-laptop pppd[6563]: pppd 2.4.4 started by >>>>>>>>>>>> root, >>>>>>>>>>>> uid >>>>>>>>>>>> 0 >>>>>>>>>>>> Apr 25 17:37:38 tourcom-laptop pppd[6563]: Using interface ppp0 >>>>>>>>>>>> Apr 25 17:37:38 tourcom-laptop pppd[6563]: Connect: ppp0 <--> >>>>>>>>>>>> /dev/ttyACM0 >>>>>>>>>>>> Apr 25 17:37:56 tourcom-laptop pppd[6563]: Serial line is looped >>>>>>>>>>>> back. >>>>>>>>>>>> Apr 25 17:37:56 tourcom-laptop pppd[6563]: Connection terminated. >>>>>>>>>>>> Apr 25 17:37:56 tourcom-laptop pppd[6563]: Exit. >>>>>>>>>>>> Apr 25 17:39:19 tourcom-laptop pppd[6583]: pppd 2.4.4 started by >>>>>>>>>>>> root, >>>>>>>>>>>> uid >>>>>>>>>>>> 0 >>>>>>>>>>>> Apr 25 17:39:19 tourcom-laptop pppd[6583]: Using interface ppp0 >>>>>>>>>>>> Apr 25 17:39:19 tourcom-laptop pppd[6583]: Connect: ppp0 <--> >>>>>>>>>>>> /dev/ttyACM0 >>>>>>>>>>>> Apr 25 17:39:24 tourcom-laptop pppd[6583]: PAP authentication >>>>>>>>>>>> succeeded >>>>>>>>>>>> Apr 25 17:39:24 tourcom-laptop kernel: [ เธขย 701.755111] PPP BSD >>>>>>>>>>>> Compression module registered >>>>>>>>>>>> Apr 25 17:39:24 tourcom-laptop kernel: [ เธขย 701.833370] PPP >>>>>>>>>>>> Deflate >>>>>>>>>>>> Compression module registered >>>>>>>>>>>> Apr 25 17:39:39 tourcom-laptop pppd[6583]: local เธขย IP address >>>>>>>>>>>> 10.174.152.18 >>>>>>>>>>>> Apr 25 17:39:39 tourcom-laptop pppd[6583]: remote IP address >>>>>>>>>>>> 10.1.1.1 >>>>>>>>>>>> Apr 25 17:39:39 tourcom-laptop pppd[6583]: primary เธขย DNS >>>>>>>>>>>> address >>>>>>>>>>>> 203.146.237.237 >>>>>>>>>>>> Apr 25 17:39:39 tourcom-laptop pppd[6583]: secondary DNS address >>>>>>>>>>>> 202.149.24.5 >>>>>>>>>>>> Apr 25 17:42:07 tourcom-laptop pppd[6583]: Terminating on signal >>>>>>>>>>>> 15 >>>>>>>>>>>> Apr 25 17:42:07 tourcom-laptop pppd[6583]: Connect time 2.5 >>>>>>>>>>>> minutes. >>>>>>>>>>>> Apr 25 17:42:07 tourcom-laptop pppd[6583]: Sent 68036 bytes, >>>>>>>>>>>> received >>>>>>>>>>>> 263473 bytes. >>>>>>>>>>>> Apr 25 17:42:07 tourcom-laptop pppd[6583]: Connection terminated. >>>>>>>>>>>> Apr 25 17:42:07 tourcom-laptop pppd[6583]: Exit. >>>>>>>>>>>> Apr 25 17:42:15 tourcom-laptop kernel: [ เธขย 873.128154] usb >>>>>>>>>>>> 2-2: USB >>>>>>>>>>>> disconnect, address 2 >>>>>>>>>>>> >>>>>>>>>>>> Here above shows that you apparently used a USB modem with device >>>>>>>>>>>> /dev/ttyACM0 >>>>>>>>>>>> that has nothing to do with the device that you apparently need >>>>>>>>>>>> to >>>>>>>>>>>> use >>>>>>>>>>>> /dev/ttySL0 >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> Apr 24 22:05:24 tourcom-laptop pppd[6415]: pppd 2.4.4 started by >>>>>>>>>>>> root, >>>>>>>>>>>> uid >>>>>>>>>>>> 0 >>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (BUSY) >>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (NO CARRIER) >>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (VOICE) >>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (NO DIALTONE) >>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (NO DIAL >>>>>>>>>>>> TONE) >>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (NO ANSWER) >>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (DELAYED) >>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: send (ATZ^M) >>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: expect (OK) >>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: ^M^M^MATZ^M^M >>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: OK >>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: เธขย -- got it >>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: send (ATDT1222^M) >>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: expect (CONNECT) >>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: ^M >>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: ATDT1222^M^M >>>>>>>>>>>> Apr 24 22:06:03 tourcom-laptop chat[6420]: NO CARRIER >>>>>>>>>>>> Apr 24 22:06:03 tourcom-laptop chat[6420]: เธขย -- failed >>>>>>>>>>>> Apr 24 22:06:03 tourcom-laptop chat[6420]: Failed (NO CARRIER) >>>>>>>>>>>> Apr 24 22:06:04 tourcom-laptop pppd[6415]: Exit. >>>>>>>>>>>> Apr 24 22:07:13 tourcom-laptop kernel: [ เธขย 380.500015] ALSA >>>>>>>>>>>> /usr/src/modules/alsa/alsa-driver-1.0.16/pci/hda/hda_intel.c:634: >>>>>>>>>>>> hda_intel: azx_get_response timeout, switching to polling mode: >>>>>>>>>>>> last >>>>>>>>>>>> cmd=0x10490000 >>>>>>>>>>>> Apr 24 22:07:51 tourcom-laptop pppd[6443]: pppd 2.4.4 started by >>>>>>>>>>>> root, >>>>>>>>>>>> uid >>>>>>>>>>>> 0 >>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (BUSY) >>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (NO CARRIER) >>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (VOICE) >>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (NO DIALTONE) >>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (NO DIAL >>>>>>>>>>>> TONE) >>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (NO ANSWER) >>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (DELAYED) >>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: send (ATZ^M) >>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: expect (OK) >>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: ^M^M^MATZ^M^M >>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: OK >>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: เธขย -- got it >>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: send (ATDT1222^M) >>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: expect (CONNECT) >>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: ^M >>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: ATDT1222^M^M >>>>>>>>>>>> Apr 24 22:08:30 tourcom-laptop chat[6445]: NO CARRIER >>>>>>>>>>>> Apr 24 22:08:30 tourcom-laptop chat[6445]: เธขย -- failed >>>>>>>>>>>> Apr 24 22:08:30 tourcom-laptop chat[6445]: Failed (NO CARRIER) >>>>>>>>>>>> Apr 24 22:08:31 tourcom-laptop pppd[6443]: Exit. >>>>>>>>>>>> >>>>>>>>>>>> Here wlan0 is another interface that is not needed when you are >>>>>>>>>>>> trying >>>>>>>>>>>> to connect with dialup. >>>>>>>>>>>> It needs to be shut off to troubleshoot the dialup connection. >>>>>>>>>>>> >>>>>>>>>>>> $ sudo ifconfig wlan0 down >>>>>>>>>>>> and all others too like eth0, eth1 etc. >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> Apr 20 14:45:17 tourcom-laptop kernel: [ เธขย 22.526400] wlan0: >>>>>>>>>>>> ethernet >>>>>>>>>>>> device 00:16:cf:73:b1:97 using serialized NDIS driver: net5211, >>>>>>>>>>>> version: 0x40002, NDIS version: 0x501, vendor: 'NDIS Network >>>>>>>>>>>> Adapter', >>>>>>>>>>>> 168C:001A.5.conf >>>>>>>>>>>> Apr 20 14:45:17 tourcom-laptop kernel: [ เธขย 22.543385] >>>>>>>>>>>> acer-wmi: >>>>>>>>>>>> Acer >>>>>>>>>>>> Laptop ACPI-WMI Extras >>>>>>>>>>>> Apr 20 14:45:17 tourcom-laptop kernel: [ เธขย 22.568075] wlan0: >>>>>>>>>>>> encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; >>>>>>>>>>>> AES/CCMP with WPA, WPA2, WPA2PSK >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> What is this ? >>>>>>>>>>>> >>>>>>>>>>>> Apr 20 14:45:38 tourcom-laptop kernel: [ เธขย 51.034653] >>>>>>>>>>>> Intel537: >>>>>>>>>>>> disagrees about version of symbol struct_module >>>>>>>>>>>> Apr 20 14:45:38 tourcom-laptop kernel: [ เธขย 51.081436] >>>>>>>>>>>> Intel537: >>>>>>>>>>>> disagrees about version of symbol struct_module >>>>>>>>>>>> >>>>>>>>>>>> Intel537 modem?? เธขย too, เธขย Did not see that one when you >>>>>>>>>>>> sent >>>>>>>>>>>> ModemData.txt first. >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> Apr 20 14:45:40 tourcom-laptop kernel: [ เธขย 53.644280] sky2 >>>>>>>>>>>> eth0: >>>>>>>>>>>> enabling interface >>>>>>>>>>>> Apr 20 14:45:40 tourcom-laptop kernel: [ เธขย 53.647244] >>>>>>>>>>>> ADDRCONF(NETDEV_UP): eth0: link is not ready >>>>>>>>>>>> Apr 20 14:45:42 tourcom-laptop kernel: [ เธขย 55.293253] sky2 >>>>>>>>>>>> eth0: >>>>>>>>>>>> Link >>>>>>>>>>>> is up at 100 Mbps, full duplex, flow control both >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> Apr 20 18:23:18 tourcom-laptop kernel: [ 1837.606047] sky2 eth0: >>>>>>>>>>>> Link is >>>>>>>>>>>> down. >>>>>>>>>>>> Apr 20 18:23:20 tourcom-laptop kernel: [ 1839.206504] sky2 eth0: >>>>>>>>>>>> Link >>>>>>>>>>>> is up at 100 Mbps, full duplex, flow control both >>>>>>>>>>>> Apr 20 18:23:26 tourcom-laptop kernel: [ 1845.688796] sky2 eth0: >>>>>>>>>>>> Link is >>>>>>>>>>>> down. >>>>>>>>>>>> Apr 20 18:23:52 tourcom-laptop kernel: [ 1871.418303] sky2 eth0: >>>>>>>>>>>> Link >>>>>>>>>>>> is up at 100 Mbps, full duplex, flow control both >>>>>>>>>>>> Apr 20 18:34:19 tourcom-laptop kernel: [ 2498.381516] device eth0 >>>>>>>>>>>> left >>>>>>>>>>>> promiscuous mode >>>>>>>>>>>> >>>>>>>>>>>> Try one thing at a time. เธขย You are trying to do too much. >>>>>>>>>>>> เธขย If you >>>>>>>>>>>> want >>>>>>>>>>>> to connect with slmodemd use that and that only. เธขย When >>>>>>>>>>>> attempting >>>>>>>>>>>> to >>>>>>>>>>>> connect, open a terminal and type >>>>>>>>>>>> $ sudo tail -f /var/log/messages >>>>>>>>>>>> >>>>>>>>>>>> send only the parts when the connection is taking place and when >>>>>>>>>>>> it >>>>>>>>>>>> fails. >>>>>>>>>>>> >>>>>>>>>>>> Regards, >>>>>>>>>>>> >>>>>>>>>>>> Antonio >>>>>>>>>>>> >>>>>>>>>>>> On 4/26/09, Patompong Kumdang <u500910052@xxxxxx> wrote: >>>>>>>>>>>>> Hello, >>>>>>>>>>>>> I heve sent this log file to you. >>>>>>>>>>>>> >>>>>>>>>>>>> Thank you. >>>>>>>>>>>>> >>>>>>>>>>>>> Tour. >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>>> Tour, >>>>>>>>>>>>>> >>>>>>>>>>>>>> Could you try to make a log file of your session >>>>>>>>>>>>>> >>>>>>>>>>>>>> $ sudo wvdial 2>&1 | tee wvdial.out >>>>>>>>>>>>>> >>>>>>>>>>>>>> send wvdial.out to us(list) >>>>>>>>>>>>>> >>>>>>>>>>>>>> เธขย and attach output of >>>>>>>>>>>>>> $ sudo tail -f var/log/messages >>>>>>>>>>>>>> >>>>>>>>>>>>>> Report back presently. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Regards, >>>>>>>>>>>>>> >>>>>>>>>>>>>> Antonio >>>>>>>>>>>>>> >>>>>>>>>>>>>> 2009/4/25 Patompong Kumdang <u500910052@xxxxxx>: >>>>>>>>>>>>>>> Antonio, >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> I don't know about how to choose driver to in stall, >>>>>>>>>>>>>>> I follow the step that Marv suggest. >>>>>>>>>>>>>>> My username and password is a free account in my country.(it's >>>>>>>>>>>>>>> safe ) >>>>>>>>>>>>>>> In windows I don't use a special command. >>>>>>>>>>>>>>> Now, I guess my modem can't sent signal to server. >>>>>>>>>>>>>>> Do you listen the file that I sent to you. >>>>>>>>>>>>>> Yes, I get typically the same sound when I dialup too! >>>>>>>>>>>>>>> Thank you very much :) >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Tour. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> TouR, Marv >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> I don't know if this will make a difference, but since your >>>>>>>>>>>>>>>> using >>>>>>>>>>>>>>>> precompiled SLMODEMD with ALSA support, your alsa version is >>>>>>>>>>>>>>>> 1.0.19 >>>>>>>>>>>>>>>> and there does not exist a 1.0.19 >>>>>>>>>>>>>>>> SLMODEMD.gcc4.3_alsa1.0.19.tar.gz. >>>>>>>>>>>>>>>> Marv will it make a difference if he needs a >>>>>>>>>>>>>>>> gcc4.3_alsa1.0.19 >>>>>>>>>>>>>>>> SLMODEMD? เธขย He is having difficulties getting connected to >>>>>>>>>>>>>>>> internet. >>>>>>>>>>>>>>>> This email sent to Marv, and Jacques not to list so your >>>>>>>>>>>>>>>> username >>>>>>>>>>>>>>>> and >>>>>>>>>>>>>>>> password will be safe! >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> TouR, >>>>>>>>>>>>>>>> my wvdial.conf file looks this way: >>>>>>>>>>>>>>>> [olivares@localhost ~]$ cat /etc/wvdial.conf >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> [Dialer Defaults] >>>>>>>>>>>>>>>> Init2 = ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90 >>>>>>>>>>>>>>>> Modem Type = Analog Modem >>>>>>>>>>>>>>>> Phone = 7072000 >>>>>>>>>>>>>>>> ISDN = 0 >>>>>>>>>>>>>>>> Username = myusername >>>>>>>>>>>>>>>> Init1 = ATZ >>>>>>>>>>>>>>>> Password = ************ >>>>>>>>>>>>>>>> Modem = /dev/ttySL0 >>>>>>>>>>>>>>>> Baud = 460800 >>>>>>>>>>>>>>>> Carrier Check = No >>>>>>>>>>>>>>>> Stupid Mode = 1 >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> A SLMODEMD with alsa 1.0.19 might be his best bet? เธขย Don't >>>>>>>>>>>>>>>> know >>>>>>>>>>>>>>>> if >>>>>>>>>>>>>>>> this >>>>>>>>>>>>>>>> makes a difference, but why not ask? >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> http://linmodems.technion.ac.il/packages/smartlink/ >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Here's your wvdial.con >>>>>>>>>>>>>>>> this is my wvdial.conf file >>>>>>>>>>>>>>>> ------------------------------------- >>>>>>>>>>>>>>>> [Dialer Defaults] >>>>>>>>>>>>>>>> Modem = /dev/ttySL0 >>>>>>>>>>>>>>>> Init1 = ATZ >>>>>>>>>>>>>>>> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>>>>>>>>>>>>> ;Stupid Mode = 1 >>>>>>>>>>>>>>>> Modem Type = Analog Modem >>>>>>>>>>>>>>>> Phone = 1222 >>>>>>>>>>>>>>>> ISDN = 0 >>>>>>>>>>>>>>>> Username = U89$0y)9@xxxxxxxxxxxxx >>>>>>>>>>>>>>>> Carrier Check = no >>>>>>>>>>>>>>>> Password = j4**9c+p >>>>>>>>>>>>>>>> Baud = 460800 >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Jacques, เธขย is a username allow characters like ")" in >>>>>>>>>>>>>>>> wvdial.conf ? >>>>>>>>>>>>>>>> U89$0y)9@xxxxxxxxxxxxx เธขย ? >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> I am looking for what your ISP requires, but can't seem to >>>>>>>>>>>>>>>> find >>>>>>>>>>>>>>>> anything. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> http://www.tot.co.th/toten/index.php?option=com_content&task=view&id=363&Itemid=1121 >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> TouR >>>>>>>>>>>>>>>> Do you use any special commands or strings to connect via >>>>>>>>>>>>>>>> windows? >>>>>>>>>>>>>>>> It is strange that the connection can't seem to get through? >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> 2009/4/25 Patompong Kumdang <u500910052@xxxxxx>: >>>>>>>>>>>>>>>>> Antonio, >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Thanks. for your help. :) >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> I try to modify wvdial.conf, But it has the same problem. >>>>>>>>>>>>>>>>> I attach file that contain the sound that I hear when >>>>>>>>>>>>>>>>> connect >>>>>>>>>>>>>>>>> using ubuntu (001.wav) and using windows (003.wav)(windows >>>>>>>>>>>>>>>>> can >>>>>>>>>>>>>>>>> connect) >>>>>>>>>>>>>>>>> I guess my modem can't sent information to server? >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> and this is my log file >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> ---------------------------------------------------------- >>>>>>>>>>>>>>>>> Baud = 57,600 เธขย , +MS=34 >>>>>>>>>>>>>>>>> ---------------------------------------------------------- >>>>>>>>>>>>>>>>> --> WvDial: Internet dialer version 1.60 >>>>>>>>>>>>>>>>> --> Cannot get information for serial port. >>>>>>>>>>>>>>>>> --> Initializing modem. >>>>>>>>>>>>>>>>> --> Sending: ATZ >>>>>>>>>>>>>>>>> ATZ >>>>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>>>> --> Sending: ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=34 >>>>>>>>>>>>>>>>> ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=34 >>>>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>>>> --> Modem initialized. >>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>>>>>> --> No Carrier! เธขย Trying again. >>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>>> --> Timed out while dialing. เธขย Trying again. >>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>>> --> No Carrier! เธขย Trying again. >>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>>> --> No Carrier! เธขย Trying again. >>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>>> --> No Carrier! เธขย Trying again. >>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> ------------------------------------------------------------------ >>>>>>>>>>>>>>>>> Baud = 57,600 เธขย ,+MS=90 >>>>>>>>>>>>>>>>> ------------------------------------------------------------------ >>>>>>>>>>>>>>>>> --> WvDial: Internet dialer version 1.60 >>>>>>>>>>>>>>>>> --> Cannot get information for serial port. >>>>>>>>>>>>>>>>> --> Initializing modem. >>>>>>>>>>>>>>>>> --> Sending: ATZ >>>>>>>>>>>>>>>>> ATZ >>>>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>>>> --> Sending: ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90 >>>>>>>>>>>>>>>>> ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90 >>>>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>>>> --> Modem initialized. >>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>>>>>> --> No Carrier! เธขย Trying again. >>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> ------------------------------------------------ >>>>>>>>>>>>>>>>> Baud = 115,200 เธขย , +MS=90 >>>>>>>>>>>>>>>>> ------------------------------------------------ >>>>>>>>>>>>>>>>> --> WvDial: Internet dialer version 1.60 >>>>>>>>>>>>>>>>> --> Cannot get information for serial port. >>>>>>>>>>>>>>>>> --> Initializing modem. >>>>>>>>>>>>>>>>> --> Sending: ATZ >>>>>>>>>>>>>>>>> ATZ >>>>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>>>> --> Sending: ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90 >>>>>>>>>>>>>>>>> ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90 >>>>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>>>> --> Modem initialized. >>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>>>>>> --> No Carrier! เธขย Trying again. >>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> --------------------------------------------------------- >>>>>>>>>>>>>>>>> Baud = 115,200 , เธขย +MS=34 >>>>>>>>>>>>>>>>> --------------------------------------------------------- >>>>>>>>>>>>>>>>> --> WvDial: Internet dialer version 1.60 >>>>>>>>>>>>>>>>> --> Cannot get information for serial port. >>>>>>>>>>>>>>>>> --> Initializing modem. >>>>>>>>>>>>>>>>> --> Sending: ATZ >>>>>>>>>>>>>>>>> ATZ >>>>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>>>> --> Sending: ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=34 >>>>>>>>>>>>>>>>> ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=34 >>>>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>>>> --> Modem initialized. >>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>>>>>> --> No Carrier! เธขย Trying again. >>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> ------------------------------------------------------------------ >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Tour, >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Try to modify wvdial.conf from >>>>>>>>>>>>>>>>>> [Dialer Defaults] >>>>>>>>>>>>>>>>>> Modem = /dev/ttySL0 >>>>>>>>>>>>>>>>>> Init1 = ATZ >>>>>>>>>>>>>>>>>> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>>>>>>>>>>>>>>> ;Stupid Mode = 1 >>>>>>>>>>>>>>>>>> Modem Type = Analog Modem >>>>>>>>>>>>>>>>>> Phone = 1222 >>>>>>>>>>>>>>>>>> ISDN = 0 >>>>>>>>>>>>>>>>>> Username = U89$0y)9@xxxxxxxxxxxxx >>>>>>>>>>>>>>>>>> Carrier Check = no >>>>>>>>>>>>>>>>>> Password = ********** เธขย <--- change this to ***** be >>>>>>>>>>>>>>>>>> careful >>>>>>>>>>>>>>>>>> with >>>>>>>>>>>>>>>>>> passwords others can take advantage when posting to list >>>>>>>>>>>>>>>>>> Baud = 460800 >>>>>>>>>>>>>>>>>> to >>>>>>>>>>>>>>>>>> [Dialer Defaults] >>>>>>>>>>>>>>>>>> Modem = /dev/ttySL0 >>>>>>>>>>>>>>>>>> Init1 = ATZ >>>>>>>>>>>>>>>>>> Init2 = ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90 เธขย <--- >>>>>>>>>>>>>>>>>> เธขย add X3 >>>>>>>>>>>>>>>>>> option to >>>>>>>>>>>>>>>>>> skip dialtone checking, and add +MS=90 you may try +MS=34 >>>>>>>>>>>>>>>>>> if >>>>>>>>>>>>>>>>>> +MS=90 >>>>>>>>>>>>>>>>>> does not help you get connected >>>>>>>>>>>>>>>>>> Modem Type = Analog Modem >>>>>>>>>>>>>>>>>> Phone = 1222 >>>>>>>>>>>>>>>>>> Baud = 460800 เธขย <---- you can also try lower bauds like >>>>>>>>>>>>>>>>>> 115,200 or >>>>>>>>>>>>>>>>>> 57,600 in case it is needed. >>>>>>>>>>>>>>>>>> ISDN = 0 >>>>>>>>>>>>>>>>>> Username = U89$0y)9@xxxxxxxxxxxxx >>>>>>>>>>>>>>>>>> Password = ********** >>>>>>>>>>>>>>>>>> Carrier Check = no >>>>>>>>>>>>>>>>>> Stupid Mode = 1 เธขย <--- remove the ";", it might help get >>>>>>>>>>>>>>>>>> you >>>>>>>>>>>>>>>>>> connected >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Try that and report back. เธขย Also, if for any reason you >>>>>>>>>>>>>>>>>> do >>>>>>>>>>>>>>>>>> not >>>>>>>>>>>>>>>>>> get >>>>>>>>>>>>>>>>>> connected, try reading the DOCs/wvdial.txt file. เธขย In >>>>>>>>>>>>>>>>>> that >>>>>>>>>>>>>>>>>> file it >>>>>>>>>>>>>>>>>> summarizes more of what I am recommending here. เธขย Also >>>>>>>>>>>>>>>>>> try to >>>>>>>>>>>>>>>>>> create >>>>>>>>>>>>>>>>>> a >>>>>>>>>>>>>>>>>> file that you may send should you fail to get connected. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> ## เธขย เธขย To make a logfile wvdial.out >>>>>>>>>>>>>>>>>> $ sudo wvdial 2>&1 | tee wvdial.out >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> and attach wvdial.out to list. เธขย You may also read up on >>>>>>>>>>>>>>>>>> Jacques' >>>>>>>>>>>>>>>>>> post-install troubleshooting guide/howto : >>>>>>>>>>>>>>>>>> http://linmodems.technion.ac.il/post-install.html >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Regards, >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Antonio >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> 2009/4/24 Patompong Kumdang <u500910052@xxxxxx>: >>>>>>>>>>>>>>>>>>> Hello, >>>>>>>>>>>>>>>>>>> I'm Tour, Thailand >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> I cannot connect to internet by using my internal modem. >>>>>>>>>>>>>>>>>>> I use ubuntu 8.1 เธขย kernel 2.6.27-10-generic >>>>>>>>>>>>>>>>>>> when I connect, I can hear the dial tone like as connect >>>>>>>>>>>>>>>>>>> by >>>>>>>>>>>>>>>>>>> windows, >>>>>>>>>>>>>>>>>>> But the sound that I hear not the same, It stop sound >>>>>>>>>>>>>>>>>>> later. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> (I guss you เธขย know that I tell, my english not very >>>>>>>>>>>>>>>>>>> well) >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> this is my wvdial.conf >>>>>>>>>>>>>>>>>>> ------------------------------------------- >>>>>>>>>>>>>>>>>>> root@tourcom-laptop:/home/tourcom# wvdialconf >>>>>>>>>>>>>>>>>>> /etc/wvdial.conf >>>>>>>>>>>>>>>>>>> Editing `/etc/wvdial.conf'. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Scanning your serial ports for a modem. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Modem Port Scan<*1>: S0 เธขย S1 เธขย S2 เธขย S3 >>>>>>>>>>>>>>>>>>> WvModem<*1>: Cannot get information for serial port. >>>>>>>>>>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 -- OK >>>>>>>>>>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 Z -- OK >>>>>>>>>>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 -- OK >>>>>>>>>>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK >>>>>>>>>>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK >>>>>>>>>>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK >>>>>>>>>>>>>>>>>>> ttySL0<*1>: Modem Identifier: ATI -- SmartLink Soft Modem >>>>>>>>>>>>>>>>>>> ttySL0<*1>: Speed 4800: AT -- OK >>>>>>>>>>>>>>>>>>> ttySL0<*1>: Speed 9600: AT -- OK >>>>>>>>>>>>>>>>>>> ttySL0<*1>: Speed 19200: AT -- OK >>>>>>>>>>>>>>>>>>> ttySL0<*1>: Speed 38400: AT -- OK >>>>>>>>>>>>>>>>>>> ttySL0<*1>: Speed 57600: AT -- OK >>>>>>>>>>>>>>>>>>> ttySL0<*1>: Speed 115200: AT -- OK >>>>>>>>>>>>>>>>>>> ttySL0<*1>: Speed 230400: AT -- OK >>>>>>>>>>>>>>>>>>> ttySL0<*1>: Speed 460800: AT -- OK >>>>>>>>>>>>>>>>>>> ttySL0<*1>: Max speed is 460800; that should be safe. >>>>>>>>>>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Found a modem on /dev/ttySL0. >>>>>>>>>>>>>>>>>>> Modem configuration written to /etc/wvdial.conf. >>>>>>>>>>>>>>>>>>> ttySL0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 >>>>>>>>>>>>>>>>>>> +FCLASS=0" >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> this is the script when I connect >>>>>>>>>>>>>>>>>>> ---------------------------------------------------------- >>>>>>>>>>>>>>>>>>> Script started on Sat 25 Apr 2009 09:48:30 AM ICT >>>>>>>>>>>>>>>>>>> เธขย ]0;root@tourcom-laptop: /home/tourcom >>>>>>>>>>>>>>>>>>> root@tourcom-laptop:/home/tourcom# >>>>>>>>>>>>>>>>>>> wvdial >>>>>>>>>>>>>>>>>>> --> WvDial: Internet dialer version 1.60 >>>>>>>>>>>>>>>>>>> --> Cannot get information for serial port. >>>>>>>>>>>>>>>>>>> --> Initializing modem. >>>>>>>>>>>>>>>>>>> --> Sending: ATZ >>>>>>>>>>>>>>>>>>> ATZ >>>>>>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>>>>>> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>>>>>>>>>>>>>>>> ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>>>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>>>>>> --> Modem initialized. >>>>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>>>>>>>> --> No Carrier! เธขย Trying again. >>>>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>>>>> ^CCaught signal 2: เธขย Attempting to exit gracefully... >>>>>>>>>>>>>>>>>>> --> Disconnecting at Sat Apr 25 09:49:42 2009 >>>>>>>>>>>>>>>>>>> เธขย ]0;root@tourcom-laptop: /home/tourcom >>>>>>>>>>>>>>>>>>> root@tourcom-laptop:/home/tourcom# >>>>>>>>>>>>>>>>>>> exit >>>>>>>>>>>>>>>>>>> exit >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Script done on Sat 25 Apr 2009 09:49:45 AM ICT >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> this is my wvdial.conf file >>>>>>>>>>>>>>>>>>> ------------------------------------- >>>>>>>>>>>>>>>>>>> [Dialer Defaults] >>>>>>>>>>>>>>>>>>> Modem = /dev/ttySL0 >>>>>>>>>>>>>>>>>>> Init1 = ATZ >>>>>>>>>>>>>>>>>>> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>>>>>>>>>>>>>>>> ;Stupid Mode = 1 >>>>>>>>>>>>>>>>>>> Modem Type = Analog Modem >>>>>>>>>>>>>>>>>>> Phone = 1222 >>>>>>>>>>>>>>>>>>> ISDN = 0 >>>>>>>>>>>>>>>>>>> Username = U89$0y)9@xxxxxxxxxxxxx >>>>>>>>>>>>>>>>>>> Carrier Check = no >>>>>>>>>>>>>>>>>>> Password = j4**9c+p >>>>>>>>>>>>>>>>>>> Baud = 460800 >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> <div><br></div> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> <div><br></div> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>> <div><br></div> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>> >>>>>>> >>>>>> >>>>> >>>>> >>>> >>> >>> >> > >
