Tour, Upon rebooting, retry $ sudo agrsm-test Sometimes this reboot is necessary. MarvS 2009/4/30 Patompong Kumdang <u500910052@xxxxxx>: > MarvS, > > I think that driver not support my modem? > when I use wvdialconf it cannot find my modem, > And when I plugget in my telephone line, It use signal from > telephone all the time.(but can't connect) > when I try to connect by old driver, it has the same problem. > > Thanks for your help. :) > > Tour. > > > > > > >> Bjorn >> Re: Perhaps agrsm is worth a shot? >> That is a good suggestion. Certainly will do no harm. >> >> Tour, >> >> FIrst install the Ubuntu package dkms. Then from >> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ get the >> dkms-agrsm_2.1.80-6_i386.deb, agrsm-howto.txt and >> agrsm-tools_0.0.1_all.deb . Install the .deb packages with >> $ sudo dpkg -i dkms*.deb agrsm*.deb >> which hopefully will culminate in the modem being detected. >> For understanding See the example at >> http://linmodems.technion.ac.il/bigarch/archive-eighth/msg03863.html >> The dkms toolset automates compiling, including compiling of needed >> update drivers >> >> MarvS >> >> On Tue, Apr 28, 2009 at 7:11 AM, Bjorn Wielens <Uniacke1@xxxxxxxx> wrote: >>> Hi Marv, >>> I don't have such a modem, but this may be useful for later: >>> The agrsm packages with support for 11c11040 have the following >>> supported devices: >>> Note that the 11c11040 is not directly listed, but is identified through >>> the audio card ID. ย Pennnrhaps agrsm is worth a shot? >>> >>> ย { 0x11C1, 0x0620, 0x0000, 0x0000 }, >>> ย { 0x1039, 0x7013, 0x0000, 0x0000 }, >>> ย { 0x1106, 0x3068, 0x0000, 0x0000 }, >>> ย { 0x8086, 0x2668, 0x0000, 0x0000 }, //ich6 hda >>> ย { 0x8086, 0x27D8, 0x0000, 0x0000 }, //ich7 hda >>> ย { 0x8086, 0x284B, 0x0000, 0x0000 }, //ich8 hda >>> ย { 0x8086, 0x269a, 0x0000, 0x0000 }, ย /* ESB2 */ >>> ย { 0x8086, 0x293e, 0x0000, 0x0000 }, /* ICH9 */ >>> ย { 0x8086, 0x293f, 0x0000, 0x0000 }, /* ICH9 */ >>> ย { 0x1002, 0x437b, 0x0000, 0x0000 }, ย /* ATI SB450 */ >>> ย { 0x1002, 0x4383, 0x0000, 0x0000 }, /* ATI SB600 */ >>> ย { 0x1002, 0x793b, 0x0000, 0x0000 }, /* ATI RS600 HDMI */ >>> ย { 0x1002, 0x7919, 0x0000, 0x0000 }, ย /* ATI RS690 HDMI */ >>> ย { 0x1002, 0x960c, 0x0000, 0x0000 }, /* ATI RS780 HDMI */ >>> ย { 0x1002, 0xaa00, 0x0000, 0x0000 }, /* ATI R600 HDMI */ >>> ย { 0x1106, 0x3288, 0x0000, 0x0000 }, ย /* VIA VT8251/VT8237A */ >>> ย { 0x1039, 0x7502, 0x0000, 0x0000 }, ย /* SIS966 */ >>> ย { 0x10b9, 0x5461, 0x0000, 0x0000 }, /* ULI M5461 */ >>> ย { 0x10de, 0x026c, 0x0000, 0x0000 }, ย /* NVIDIA MCP51 */ >>> ย { 0x10de, 0x0371, 0x0000, 0x0000 }, ย /* NVIDIA MCP55 */ >>> ย { 0x10de, 0x03e4, 0x0000, 0x0000 }, ย /* NVIDIA MCP61 */ >>> ย { 0x10de, 0x03f0, 0x0000, 0x0000 }, /* NVIDIA MCP61 */ >>> ย { 0x10de, 0x044a, 0x0000, 0x0000 }, /* NVIDIA MCP65 */ >>> ย { 0x10de, 0x044b, 0x0000, 0x0000 }, /* NVIDIA MCP65 */ >>> ย { 0x10de, 0x055c, 0x0000, 0x0000 }, ย /* NVIDIA MCP67 */ >>> ย { 0x10de, 0x055d, 0x0000, 0x0000 }, ย /* NVIDIA MCP67 */ >>> ย { 0x8086, 0x2416, 0x0000, 0x0000 }, >>> ย { 0x8086, 0x2426, 0x0000, 0x0000 }, >>> ย { 0x8086, 0x2446, 0x0000, 0x0000 }, >>> ย { 0x8086, 0x7196, 0x0000, 0x0000 }, >>> ย { 0x8086, 0x2486, 0x0000, 0x0000 }, >>> ย { 0x8086, 0x24C6, 0x0000, 0x0000 }, >>> ย { 0x8086, 0x24D6, 0x0000, 0x0000 }, >>> ย { 0x11C1, 0x048C, 0x0000, 0x0000 }, >>> ย { 0x11C1, 0x048F, 0x0000, 0x0000 }, >>> ย { 0x8086, 0x266D, 0x0000, 0x0000 }, >>> >>> Bjorn. >>> >>> >>> Marvin Stodolsky wrote: >>>> List, >>>> >>>> Would any of you with the Agere 0x11c13026 modem chip, hosted on a >>>> High Definition Audio (HDA)card please report in. ย What are the >>>> specifics of HDA card, kernel and do you have modem functionality. >>>> >>>> Marv S >>>> >>>> >>>> 2009/4/27 Patompong Kumdang <u500910052@xxxxxx>: >>>>> Antonio, MarvS >>>>> >>>>> Can I try another way to connect to internet. >>>>> >>>>> Tour. >>>>> >>>>> >>>>> >>>>>> The MS drivers provide no additional useful information, beyond that >>>>>> of the ModemData.txt >>>>>> More this evening. >>>>>> >>>>>> MarvS >>>>>> >>>>>> 2009/4/27 Patompong Kumdang <u500910052@xxxxxx>: >>>>>>> Antonio, MarvS >>>>>>> >>>>>>> Sorry, ftp://u500910052@xxxxxxxxxxx/public_html/Modem.zip is broken. >>>>>>> >>>>>>> Please use this link to download again. >>>>>>> http://mail.cm.edu/~u500910052/Modem.zip >>>>>>> >>>>>>> Thanks, >>>>>>> Tour. >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>> Antonio, MarvS >>>>>>>> >>>>>>>> Can this windows driver tell you more information about my modem. >>>>>>>> please download these file at: >>>>>>>> ftp://u500910052@xxxxxxxxxxx/public_html/Modem.zip >>>>>>>> (sorry, my mail can not sent .zip file) >>>>>>>> >>>>>>>> Thanks, >>>>>>>> Tour. >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>> Antonio >>>>>>>>> >>>>>>>>> "The ALSA verion is 1.0.19" output from the scanModem script is >>>>>>>>> from a >>>>>>>>> call: >>>>>>>>> เธข ย เธข aplay --version >>>>>>>>> and this is typically matched with other ALSA components of an >>>>>>>>> installation. >>>>>>>>> >>>>>>>>> On the Ubuntu Jaunty I just upgraded to: >>>>>>>>> เธข ย เธข ย เธข aplay --version >>>>>>>>> aplay: version 1.0.18 by Jaroslav Kysela <perex@xxxxxxxx> >>>>>>>>> So if is indeed puzzling as to why TouRs is 1.0.19 >>>>>>>>> >>>>>>>>> TourR, >>>>>>>>> เธข ย เธข Have you done any cogent alternations to your System. >>>>>>>>> >>>>>>>>> MarvS >>>>>>>>> >>>>>>>>> >>>>>>>>> On Sun, Apr 26, 2009 at 10:05 PM, Antonio Olivares >>>>>>>>> <olivares14031@xxxxxxxxx> wrote: >>>>>>>>>> Tour and Marv, >>>>>>>>>> >>>>>>>>>> I am trying to follow this carefully seeing where I can help, I >>>>>>>>>> see a >>>>>>>>>> problem here and I do not know why this is happening? >>>>>>>>>> >>>>>>>>>> /usr/src/modules/alsa/alsa-driver-1.0.16/pci/hda/hda_intel.c:634: >>>>>>>>>> เน€เธ�เธ�เธข hda_intel: azx_get_response > timeout, switching to >>>>>>>>>> polling mode: >>>>>>>>>> last >>>>>>>>>> เน€เธ�เธ�เธข cmd=0x10490000 >>>>>>>>>> >>>>>>>>>> With the old ModemData.txt and the new one just sent, the alsa >>>>>>>>>> version >>>>>>>>>> is 1.0.19. เน€เธ�เธ�เธข This does not make > sense. >>>>>>>>>> >>>>>>>>>> ===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== >>>>>>>>>> The ALSA packages provide audio support and also drivers for some >>>>>>>>>> modems. >>>>>>>>>> ALSA diagnostics are written during bootup to /proc/asound/ >>>>>>>>>> folders. >>>>>>>>>> >>>>>>>>>> The ALSA verion is 1.0.19 >>>>>>>>>> The modem cards detected by "aplay -l" > เน€เธ�เธ�เธข are: >>>>>>>>>> card 0: Intel [HDA Intel], device 6: Si3054 Modem [Si3054 Modem] >>>>>>>>>> >>>>>>>>>> The /proc/asound/pcm file reports: >>>>>>>>>> ----------------------- >>>>>>>>>> 00-00: ALC883 Analog : ALC883 Analog : playback 1 : capture 1 >>>>>>>>>> 00-01: ALC883 Digital : ALC883 Digital : playback 1 >>>>>>>>>> 00-02: ALC883 Analog : ALC883 Analog : capture 1 >>>>>>>>>> 00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1 >>>>>>>>>> >>>>>>>>>> about /proc/asound/cards: >>>>>>>>>> ------------------------ >>>>>>>>>> เน€เธ�เธ�เธข 0 [Intel > เน€เธ�เธ�เธข ย > เน€เธ�เธ�เธข ย > เน€เธ�เธ�เธข >>>>>>>>>> ย เน€เธ�เธ�เธข ย > เน€เธ�เธ�เธข ]: HDA-Intel - HDA Intel >>>>>>>>>> เน€เธ�เธ�เธข ย > เน€เธ�เธ�เธข ย > เน€เธ�เธ�เธข ย > เน€เธ�เธ�เธข >>>>>>>>>> ย เน€เธ�เธ�เธข ย > เน€เธ�เธ�เธข ย > เน€เธ�เธ�เธข ย > เน€เธ�เธ�เธข >>>>>>>>>> ย เน€เธ�เธ�เธข ย > เน€เธ�เธ�เธข ย > เน€เธ�เธ�เธข HDA >>>>>>>>>> Intel at 0xd0340000 irq 22 >>>>>>>>>> >>>>>>>>>> เน€เธ�เธ�เธข PCI slot 00:1b.0 has a High > Definition Audio Card >>>>>>>>>> เน€เธ�เธ�เธข The drivers are in the kernel > modules tree at: >>>>>>>>>> เน€เธ�เธ�เธข >>>>>>>>>> /lib/modules/2.6.27-10-generic/kernel/sound/pci/hda/snd-hda-intel.ko >>>>>>>>>> /lib/modules/2.6.27-11-generic/kernel/sound/pci/hda/snd-hda-intel.ko >>>>>>>>>> /lib/modules/2.6.27-11-server/kernel/sound/pci/hda/snd-hda-intel.ko >>>>>>>>>> เน€เธ�เธ�เธข The modem codec file for the > HDA card is: >>>>>>>>>> /proc/asound/card0/codec#1 >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> I am thinking also since the alsa-version is 1.0.19, shouldn't >>>>>>>>>> the >>>>>>>>>> precompiled SLMODEMD.gcc4.3.tar.gz serve, a new one with >>>>>>>>>> -alsa-1.0.19.tar.gz probably needs to be created? >>>>>>>>>> >>>>>>>>>> My $0.02 >>>>>>>>>> >>>>>>>>>> Regards, >>>>>>>>>> >>>>>>>>>> Antonio >>>>>>>>>> >>>>>>>>>> On 4/27/09, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> wrote: >>>>>>>>>>> Tour >>>>>>>>>>> >>>>>>>>>>> For the Intel537 do: >>>>>>>>>>> >>>>>>>>>>> $ find /lib/modules --name Intel537*.ko >>>>>>>>>>> and delete any modules found. >>>>>>>>>>> >>>>>>>>>>> There may also be residual Intel537 files like: >>>>>>>>>>> เน€เธ�เธ�เธข ย > เน€เธ�เธ�เธข ย > เน€เธ�เธ�เธข >>>>>>>>>>> ย /etc/init.d/537_boot >>>>>>>>>>> เน€เธ�เธ�เธข ย > เน€เธ�เธ�เธข ย > เน€เธ�เธ�เธข >>>>>>>>>>> ย /etc/hamregistry.bin >>>>>>>>>>> เน€เธ�เธ�เธข ย > เน€เธ�เธ�เธข ย > เน€เธ�เธ�เธข ย /usr/sbin/usrsound >>>>>>>>>>> เน€เธ�เธ�เธข ย > เน€เธ�เธ�เธข ย > เน€เธ�เธ�เธข >>>>>>>>>>> ย /usr/sbin/hamregistry >>>>>>>>>>> that should be removed. >>>>>>>>>>> >>>>>>>>>>> MarvS >>>>>>>>>>> >>>>>>>>>>> 2009/4/26 Patompong Kumdang <u500910052@xxxxxx>: >>>>>>>>>>>> hello, >>>>>>>>>>>> This time I will tell you more information about my computer. >>>>>>>>>>>> >>>>>>>>>>>>>>> Here above shows that you apparently used a USB modem with >>>>>>>>>>>>>>>>>> device >>>>>>>>>>>> /dev/ttyACM0 >>>>>>>>>>>>>>> that has nothing to do with the device that you apparently >>>>>>>>>>>>>>> need >>>>>>>>>>>>>>> to >>>>>>>>>>>>>>> use >>>>>>>>>>>>>>> /dev/ttySL0 >>>>>>>>>>>> I use mobile phone to connect to internet last week. (It can >>>>>>>>>>>> connect) >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>>>>> Here wlan0 is another interface that is not needed when you >>>>>>>>>>>>>>> are >>>>>>>>>>>>>>> trying >>>>>>>>>>>>>>> to connect with dialup. >>>>>>>>>>>>>>> It needs to be shut off to troubleshoot the dialup >>>>>>>>>>>>>>> connection. >>>>>>>>>>>> I have wireless modem and lan card too, but I not use at this >>>>>>>>>>>> time. >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>>>>> What is this ? >>>>>>>>>>>>>>> Apr 20 14:45:38 tourcom-laptop kernel: [ > เน€เธ�เธ�เธข >>>>>>>>>>>>>>> ย 51.034653] >>>>>>>>>>>>>>> Intel537: >>>>>>>>>>>>>>> disagrees about version of symbol struct_module >>>>>>>>>>>>>>> Apr 20 14:45:38 tourcom-laptop kernel: [ > เน€เธ�เธ�เธข >>>>>>>>>>>>>>> ย 51.081436] >>>>>>>>>>>>>>> Intel537: >>>>>>>>>>>>>>> disagrees about version of symbol struct_module >>>>>>>>>>>> I don't know about this driver. >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>>>>> there seems to be an Intel537 driver on your system from >>>>>>>>>>>>>>> some >>>>>>>>>>>>>>> previous >>>>>>>>>>>> attempt, >>>>>>>>>>>>>>> which may be interfering. >>>>>>>>>>>>>>> Please uninstall/delete this driver from your System. >>>>>>>>>>>> I don't know how to remove this driver. >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>>>>> When attempting to >>>>>>>>>>>>>>> connect, open a terminal and type >>>>>>>>>>>>>>> $ sudo tail -f /var/log/messages >>>>>>>>>>>> I have got this message >>>>>>>>>>>> >>>>>>>>>>>> root@tourcom-laptop:/home/tourcom# sudo tail -f >>>>>>>>>>>> /var/log/messages >>>>>>>>>>>> >>>>>>>>>>>> Apr 27 07:19:32 tourcom-laptop kernel: [ > เน€เธ�เธ�เธข >>>>>>>>>>>> ย 53.691210] [drm] >>>>>>>>>>>> Initialized >>>>>>>>>>>> drm 1.1.0 20060810 >>>>>>>>>>>> Apr 27 07:19:32 tourcom-laptop kernel: [ > เน€เธ�เธ�เธข >>>>>>>>>>>> ย 53.698167] pci >>>>>>>>>>>> 0000:00:02.0: >>>>>>>>>>>> PCI INT A -> GSI 16 (level, low) -> IRQ 16 >>>>>>>>>>>> Apr 27 07:19:32 tourcom-laptop kernel: [ > เน€เธ�เธ�เธข >>>>>>>>>>>> ย 53.699489] [drm] >>>>>>>>>>>> Initialized >>>>>>>>>>>> i915 1.6.0 20060119 on minor 0 >>>>>>>>>>>> Apr 27 07:19:33 tourcom-laptop kernel: [ > เน€เธ�เธ�เธข >>>>>>>>>>>> ย 54.444472] sky2 >>>>>>>>>>>> eth0: >>>>>>>>>>>> enabling >>>>>>>>>>>> interface >>>>>>>>>>>> Apr 27 07:19:33 tourcom-laptop kernel: [ > เน€เธ�เธ�เธข >>>>>>>>>>>> ย 54.447579] >>>>>>>>>>>> ADDRCONF(NETDEV_UP): >>>>>>>>>>>> eth0: link is not ready >>>>>>>>>>>> Apr 27 07:19:37 tourcom-laptop pulseaudio[6044]: >>>>>>>>>>>> ltdl-bind-now.c: >>>>>>>>>>>> Failed >>>>>>>>>>>> to find original dlopen loader. >>>>>>>>>>>> Apr 27 07:19:37 tourcom-laptop pulseaudio[6047]: main.c: >>>>>>>>>>>> setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not >>>>>>>>>>>> permitted >>>>>>>>>>>> Apr 27 07:19:37 tourcom-laptop pulseaudio[6047]: main.c: >>>>>>>>>>>> setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not >>>>>>>>>>>> permitted >>>>>>>>>>>> Apr 27 07:27:37 tourcom-laptop kernel: [ > เน€เธ�เธ�เธข >>>>>>>>>>>> 538.346544] sky2 >>>>>>>>>>>> eth0: >>>>>>>>>>>> disabling >>>>>>>>>>>> interface >>>>>>>>>>>> Apr 27 07:31:26 tourcom-laptop kernel: [ > เน€เธ�เธ�เธข >>>>>>>>>>>> 766.852013] ALSA >>>>>>>>>>>> /usr/src/modules/alsa/alsa-driver-1.0.16/pci/hda/hda_intel.c:634: >>>>>>>>>>>> hda_intel: azx_get_response timeout, switching to polling mode: >>>>>>>>>>>> last >>>>>>>>>>>> cmd=0x10490000 >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> I sent my new scanmodem data to you. >>>>>>>>>>>> please help me to follow the step that you advice with a >>>>>>>>>>>> command >>>>>>>>>>>> code. >>>>>>>>>>>> >>>>>>>>>>>> Thank you, >>>>>>>>>>>> >>>>>>>>>>>> Tour. >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>>> Tour, >>>>>>>>>>>>> >>>>>>>>>>>>> I looked back at your ModemData.txt sent a few days ago, it >>>>>>>>>>>>> does >>>>>>>>>>>>> not >>>>>>>>>>>>> agree with output from scanModem :(, >>>>>>>>>>>>> >>>>>>>>>>>>> http://www.nabble.com/Please-help-me-to-set-up-my-modem-to23204381.html >>>>>>>>>>>>> >>>>>>>>>>>>> In the scanModem that you sent the alsa version is 1.0.19, and >>>>>>>>>>>>> with >>>>>>>>>>>>> the output messages that you sent it is 1.0.16 : >>>>>>>>>>>>> >>>>>>>>>>>>> Apr 24 16:19:38 tourcom-laptop kernel: [ > เน€เธ�เธ�เธข >>>>>>>>>>>>> 731.524013] ALSA >>>>>>>>>>>>> /usr/src/modules/alsa/alsa-driver-1.0.16/pci/hda/hda_intel.c:634: >>>>>>>>>>>>> hda_intel: azx_get_response timeout, switching to polling >>>>>>>>>>>>> mode: >>>>>>>>>>>>> last >>>>>>>>>>>>> cmd=0x10490000 >>>>>>>>>>>>> >>>>>>>>>>>>> would you mind sending ModemData.txt again, re run scanModem >>>>>>>>>>>>> and >>>>>>>>>>>>> send >>>>>>>>>>>>> it back to list. เน€เธ�เธ�เธข It is hard > to troubleshoot with >>>>>>>>>>>>> too many >>>>>>>>>>>>> things >>>>>>>>>>>>> going on. >>>>>>>>>>>>> >>>>>>>>>>>>> Regards, >>>>>>>>>>>>> >>>>>>>>>>>>> Antonio >>>>>>>>>>>>> >>>>>>>>>>>>> On 4/26/09, Antonio Olivares <olivares14031@xxxxxxxxx> wrote: >>>>>>>>>>>>>> Tour, >>>>>>>>>>>>>> >>>>>>>>>>>>>> I see too many interfaces interfering with your >>>>>>>>>>>>>> connection(s). >>>>>>>>>>>>>> >>>>>>>>>>>>>> Apr 25 17:31:34 tourcom-laptop kernel: [ > เน€เธ�เธ�เธข >>>>>>>>>>>>>> 231.792507] PPP >>>>>>>>>>>>>> generic >>>>>>>>>>>>>> driver version 2.4.2 >>>>>>>>>>>>>> Apr 25 17:31:34 tourcom-laptop pppd[6494]: pppd 2.4.4 started >>>>>>>>>>>>>> by >>>>>>>>>>>>>> root, >>>>>>>>>>>>>> uid >>>>>>>>>>>>>> 0 >>>>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (BUSY) >>>>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (NO >>>>>>>>>>>>>> CARRIER) >>>>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (VOICE) >>>>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (NO >>>>>>>>>>>>>> DIALTONE) >>>>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (NO DIAL >>>>>>>>>>>>>> TONE) >>>>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (NO >>>>>>>>>>>>>> ANSWER) >>>>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (DELAYED) >>>>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: send (ATZ^M) >>>>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: expect (OK) >>>>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: ATZ^M^M >>>>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: OK >>>>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: > เน€เธ�เธ�เธข -- >>>>>>>>>>>>>> got it >>>>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: send (ATDT#99^M) >>>>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: expect (CONNECT) >>>>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: ^M >>>>>>>>>>>>>> Apr 25 17:31:38 tourcom-laptop chat[6499]: ATDT#99^M^M >>>>>>>>>>>>>> Apr 25 17:31:38 tourcom-laptop chat[6499]: NO CARRIER >>>>>>>>>>>>>> Apr 25 17:31:38 tourcom-laptop chat[6499]: > เน€เธ�เธ�เธข -- >>>>>>>>>>>>>> failed >>>>>>>>>>>>>> Apr 25 17:31:38 tourcom-laptop chat[6499]: Failed (NO >>>>>>>>>>>>>> CARRIER) >>>>>>>>>>>>>> Apr 25 17:31:39 tourcom-laptop pppd[6494]: Exit. >>>>>>>>>>>>>> Apr 25 17:35:17 tourcom-laptop pppd[6536]: pppd 2.4.4 started >>>>>>>>>>>>>> by >>>>>>>>>>>>>> root, >>>>>>>>>>>>>> uid >>>>>>>>>>>>>> 0 >>>>>>>>>>>>>> Apr 25 17:35:17 tourcom-laptop pppd[6536]: Using interface >>>>>>>>>>>>>> ppp0 >>>>>>>>>>>>>> Apr 25 17:35:17 tourcom-laptop pppd[6536]: Connect: ppp0 <--> >>>>>>>>>>>>>> /dev/ttyACM0 >>>>>>>>>>>>>> Apr 25 17:35:36 tourcom-laptop pppd[6536]: Serial line is >>>>>>>>>>>>>> looped >>>>>>>>>>>>>> back. >>>>>>>>>>>>>> Apr 25 17:35:36 tourcom-laptop pppd[6536]: Connection >>>>>>>>>>>>>> terminated. >>>>>>>>>>>>>> Apr 25 17:35:36 tourcom-laptop pppd[6536]: Exit. >>>>>>>>>>>>>> Apr 25 17:37:38 tourcom-laptop pppd[6563]: pppd 2.4.4 started >>>>>>>>>>>>>> by >>>>>>>>>>>>>> root, >>>>>>>>>>>>>> uid >>>>>>>>>>>>>> 0 >>>>>>>>>>>>>> Apr 25 17:37:38 tourcom-laptop pppd[6563]: Using interface >>>>>>>>>>>>>> ppp0 >>>>>>>>>>>>>> Apr 25 17:37:38 tourcom-laptop pppd[6563]: Connect: ppp0 <--> >>>>>>>>>>>>>> /dev/ttyACM0 >>>>>>>>>>>>>> Apr 25 17:37:56 tourcom-laptop pppd[6563]: Serial line is >>>>>>>>>>>>>> looped >>>>>>>>>>>>>> back. >>>>>>>>>>>>>> Apr 25 17:37:56 tourcom-laptop pppd[6563]: Connection >>>>>>>>>>>>>> terminated. >>>>>>>>>>>>>> Apr 25 17:37:56 tourcom-laptop pppd[6563]: Exit. >>>>>>>>>>>>>> Apr 25 17:39:19 tourcom-laptop pppd[6583]: pppd 2.4.4 started >>>>>>>>>>>>>> by >>>>>>>>>>>>>> root, >>>>>>>>>>>>>> uid >>>>>>>>>>>>>> 0 >>>>>>>>>>>>>> Apr 25 17:39:19 tourcom-laptop pppd[6583]: Using interface >>>>>>>>>>>>>> ppp0 >>>>>>>>>>>>>> Apr 25 17:39:19 tourcom-laptop pppd[6583]: Connect: ppp0 <--> >>>>>>>>>>>>>> /dev/ttyACM0 >>>>>>>>>>>>>> Apr 25 17:39:24 tourcom-laptop pppd[6583]: PAP authentication >>>>>>>>>>>>>> succeeded >>>>>>>>>>>>>> Apr 25 17:39:24 tourcom-laptop kernel: [ > เน€เธ�เธ�เธข >>>>>>>>>>>>>> 701.755111] PPP BSD >>>>>>>>>>>>>> Compression module registered >>>>>>>>>>>>>> Apr 25 17:39:24 tourcom-laptop kernel: [ > เน€เธ�เธ�เธข >>>>>>>>>>>>>> 701.833370] PPP >>>>>>>>>>>>>> Deflate >>>>>>>>>>>>>> Compression module registered >>>>>>>>>>>>>> Apr 25 17:39:39 tourcom-laptop pppd[6583]: local > เน€เธ�เธ�เธข >>>>>>>>>>>>>> IP address >>>>>>>>>>>>>> 10.174.152.18 >>>>>>>>>>>>>> Apr 25 17:39:39 tourcom-laptop pppd[6583]: remote IP address >>>>>>>>>>>>>> 10.1.1.1 >>>>>>>>>>>>>> Apr 25 17:39:39 tourcom-laptop pppd[6583]: primary >>>>>>>>>>>>>> เน€เธ�เธ�เธข ย DNS >>>>>>>>>>>>>> address >>>>>>>>>>>>>> 203.146.237.237 >>>>>>>>>>>>>> Apr 25 17:39:39 tourcom-laptop pppd[6583]: secondary DNS >>>>>>>>>>>>>> address >>>>>>>>>>>>>> 202.149.24.5 >>>>>>>>>>>>>> Apr 25 17:42:07 tourcom-laptop pppd[6583]: Terminating on >>>>>>>>>>>>>> signal >>>>>>>>>>>>>> 15 >>>>>>>>>>>>>> Apr 25 17:42:07 tourcom-laptop pppd[6583]: Connect time 2.5 >>>>>>>>>>>>>> minutes. >>>>>>>>>>>>>> Apr 25 17:42:07 tourcom-laptop pppd[6583]: Sent 68036 bytes, >>>>>>>>>>>>>> received >>>>>>>>>>>>>> 263473 bytes. >>>>>>>>>>>>>> Apr 25 17:42:07 tourcom-laptop pppd[6583]: Connection >>>>>>>>>>>>>> terminated. >>>>>>>>>>>>>> Apr 25 17:42:07 tourcom-laptop pppd[6583]: Exit. >>>>>>>>>>>>>> Apr 25 17:42:15 tourcom-laptop kernel: [ > เน€เธ�เธ�เธข >>>>>>>>>>>>>> 873.128154] usb >>>>>>>>>>>>>> 2-2: USB >>>>>>>>>>>>>> disconnect, address 2 >>>>>>>>>>>>>> >>>>>>>>>>>>>> Here above shows that you apparently used a USB modem with >>>>>>>>>>>>>> device >>>>>>>>>>>>>> /dev/ttyACM0 >>>>>>>>>>>>>> that has nothing to do with the device that you apparently >>>>>>>>>>>>>> need >>>>>>>>>>>>>> to >>>>>>>>>>>>>> use >>>>>>>>>>>>>> /dev/ttySL0 >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> Apr 24 22:05:24 tourcom-laptop pppd[6415]: pppd 2.4.4 started >>>>>>>>>>>>>> by >>>>>>>>>>>>>> root, >>>>>>>>>>>>>> uid >>>>>>>>>>>>>> 0 >>>>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (BUSY) >>>>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (NO >>>>>>>>>>>>>> CARRIER) >>>>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (VOICE) >>>>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (NO >>>>>>>>>>>>>> DIALTONE) >>>>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (NO DIAL >>>>>>>>>>>>>> TONE) >>>>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (NO >>>>>>>>>>>>>> ANSWER) >>>>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (DELAYED) >>>>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: send (ATZ^M) >>>>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: expect (OK) >>>>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: ^M^M^MATZ^M^M >>>>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: OK >>>>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: > เน€เธ�เธ�เธข -- >>>>>>>>>>>>>> got it >>>>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: send (ATDT1222^M) >>>>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: expect (CONNECT) >>>>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: ^M >>>>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: ATDT1222^M^M >>>>>>>>>>>>>> Apr 24 22:06:03 tourcom-laptop chat[6420]: NO CARRIER >>>>>>>>>>>>>> Apr 24 22:06:03 tourcom-laptop chat[6420]: > เน€เธ�เธ�เธข -- >>>>>>>>>>>>>> failed >>>>>>>>>>>>>> Apr 24 22:06:03 tourcom-laptop chat[6420]: Failed (NO >>>>>>>>>>>>>> CARRIER) >>>>>>>>>>>>>> Apr 24 22:06:04 tourcom-laptop pppd[6415]: Exit. >>>>>>>>>>>>>> Apr 24 22:07:13 tourcom-laptop kernel: [ > เน€เธ�เธ�เธข >>>>>>>>>>>>>> 380.500015] ALSA >>>>>>>>>>>>>> /usr/src/modules/alsa/alsa-driver-1.0.16/pci/hda/hda_intel.c:634: >>>>>>>>>>>>>> hda_intel: azx_get_response timeout, switching to polling >>>>>>>>>>>>>> mode: >>>>>>>>>>>>>> last >>>>>>>>>>>>>> cmd=0x10490000 >>>>>>>>>>>>>> Apr 24 22:07:51 tourcom-laptop pppd[6443]: pppd 2.4.4 started >>>>>>>>>>>>>> by >>>>>>>>>>>>>> root, >>>>>>>>>>>>>> uid >>>>>>>>>>>>>> 0 >>>>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (BUSY) >>>>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (NO >>>>>>>>>>>>>> CARRIER) >>>>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (VOICE) >>>>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (NO >>>>>>>>>>>>>> DIALTONE) >>>>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (NO DIAL >>>>>>>>>>>>>> TONE) >>>>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (NO >>>>>>>>>>>>>> ANSWER) >>>>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (DELAYED) >>>>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: send (ATZ^M) >>>>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: expect (OK) >>>>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: ^M^M^MATZ^M^M >>>>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: OK >>>>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: > เน€เธ�เธ�เธข -- >>>>>>>>>>>>>> got it >>>>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: send (ATDT1222^M) >>>>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: expect (CONNECT) >>>>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: ^M >>>>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: ATDT1222^M^M >>>>>>>>>>>>>> Apr 24 22:08:30 tourcom-laptop chat[6445]: NO CARRIER >>>>>>>>>>>>>> Apr 24 22:08:30 tourcom-laptop chat[6445]: > เน€เธ�เธ�เธข -- >>>>>>>>>>>>>> failed >>>>>>>>>>>>>> Apr 24 22:08:30 tourcom-laptop chat[6445]: Failed (NO >>>>>>>>>>>>>> CARRIER) >>>>>>>>>>>>>> Apr 24 22:08:31 tourcom-laptop pppd[6443]: Exit. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Here wlan0 is another interface that is not needed when you >>>>>>>>>>>>>> are >>>>>>>>>>>>>> trying >>>>>>>>>>>>>> to connect with dialup. >>>>>>>>>>>>>> It needs to be shut off to troubleshoot the dialup >>>>>>>>>>>>>> connection. >>>>>>>>>>>>>> >>>>>>>>>>>>>> $ sudo ifconfig wlan0 down >>>>>>>>>>>>>> and all others too like eth0, eth1 etc. >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> Apr 20 14:45:17 tourcom-laptop kernel: [ > เน€เธ�เธ�เธข >>>>>>>>>>>>>> ย 22.526400] wlan0: >>>>>>>>>>>>>> ethernet >>>>>>>>>>>>>> device 00:16:cf:73:b1:97 using serialized NDIS driver: >>>>>>>>>>>>>> net5211, >>>>>>>>>>>>>> version: 0x40002, NDIS version: 0x501, vendor: 'NDIS Network >>>>>>>>>>>>>> Adapter', >>>>>>>>>>>>>> 168C:001A.5.conf >>>>>>>>>>>>>> Apr 20 14:45:17 tourcom-laptop kernel: [ > เน€เธ�เธ�เธข >>>>>>>>>>>>>> ย 22.543385] >>>>>>>>>>>>>> acer-wmi: >>>>>>>>>>>>>> Acer >>>>>>>>>>>>>> Laptop ACPI-WMI Extras >>>>>>>>>>>>>> Apr 20 14:45:17 tourcom-laptop kernel: [ > เน€เธ�เธ�เธข >>>>>>>>>>>>>> ย 22.568075] wlan0: >>>>>>>>>>>>>> encryption modes supported: WEP; TKIP with WPA, WPA2, >>>>>>>>>>>>>> WPA2PSK; >>>>>>>>>>>>>> AES/CCMP with WPA, WPA2, WPA2PSK >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> What is this ? >>>>>>>>>>>>>> >>>>>>>>>>>>>> Apr 20 14:45:38 tourcom-laptop kernel: [ > เน€เธ�เธ�เธข >>>>>>>>>>>>>> ย 51.034653] >>>>>>>>>>>>>> Intel537: >>>>>>>>>>>>>> disagrees about version of symbol struct_module >>>>>>>>>>>>>> Apr 20 14:45:38 tourcom-laptop kernel: [ > เน€เธ�เธ�เธข >>>>>>>>>>>>>> ย 51.081436] >>>>>>>>>>>>>> Intel537: >>>>>>>>>>>>>> disagrees about version of symbol struct_module >>>>>>>>>>>>>> >>>>>>>>>>>>>> Intel537 modem?? เน€เธ�เธ�เธข too, > เน€เธ�เธ�เธข Did not see >>>>>>>>>>>>>> that one when you >>>>>>>>>>>>>> sent >>>>>>>>>>>>>> ModemData.txt first. >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> Apr 20 14:45:40 tourcom-laptop kernel: [ > เน€เธ�เธ�เธข >>>>>>>>>>>>>> ย 53.644280] sky2 >>>>>>>>>>>>>> eth0: >>>>>>>>>>>>>> enabling interface >>>>>>>>>>>>>> Apr 20 14:45:40 tourcom-laptop kernel: [ > เน€เธ�เธ�เธข >>>>>>>>>>>>>> ย 53.647244] >>>>>>>>>>>>>> ADDRCONF(NETDEV_UP): eth0: link is not ready >>>>>>>>>>>>>> Apr 20 14:45:42 tourcom-laptop kernel: [ > เน€เธ�เธ�เธข >>>>>>>>>>>>>> ย 55.293253] sky2 >>>>>>>>>>>>>> eth0: >>>>>>>>>>>>>> Link >>>>>>>>>>>>>> is up at 100 Mbps, full duplex, flow control both >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> Apr 20 18:23:18 tourcom-laptop kernel: [ 1837.606047] sky2 >>>>>>>>>>>>>> eth0: >>>>>>>>>>>>>> Link is >>>>>>>>>>>>>> down. >>>>>>>>>>>>>> Apr 20 18:23:20 tourcom-laptop kernel: [ 1839.206504] sky2 >>>>>>>>>>>>>> eth0: >>>>>>>>>>>>>> Link >>>>>>>>>>>>>> is up at 100 Mbps, full duplex, flow control both >>>>>>>>>>>>>> Apr 20 18:23:26 tourcom-laptop kernel: [ 1845.688796] sky2 >>>>>>>>>>>>>> eth0: >>>>>>>>>>>>>> Link is >>>>>>>>>>>>>> down. >>>>>>>>>>>>>> Apr 20 18:23:52 tourcom-laptop kernel: [ 1871.418303] sky2 >>>>>>>>>>>>>> eth0: >>>>>>>>>>>>>> Link >>>>>>>>>>>>>> is up at 100 Mbps, full duplex, flow control both >>>>>>>>>>>>>> Apr 20 18:34:19 tourcom-laptop kernel: [ 2498.381516] device >>>>>>>>>>>>>> eth0 >>>>>>>>>>>>>> left >>>>>>>>>>>>>> promiscuous mode >>>>>>>>>>>>>> >>>>>>>>>>>>>> Try one thing at a time. เน€เธ�เธ�เธข > You are trying to do >>>>>>>>>>>>>> too much. >>>>>>>>>>>>>> เน€เธ�เธ�เธข If you >>>>>>>>>>>>>> want >>>>>>>>>>>>>> to connect with slmodemd use that and that only. > เน€เธ�เธ�เธข >>>>>>>>>>>>>> When >>>>>>>>>>>>>> attempting >>>>>>>>>>>>>> to >>>>>>>>>>>>>> connect, open a terminal and type >>>>>>>>>>>>>> $ sudo tail -f /var/log/messages >>>>>>>>>>>>>> >>>>>>>>>>>>>> send only the parts when the connection is taking place and >>>>>>>>>>>>>> when >>>>>>>>>>>>>> it >>>>>>>>>>>>>> fails. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Regards, >>>>>>>>>>>>>> >>>>>>>>>>>>>> Antonio >>>>>>>>>>>>>> >>>>>>>>>>>>>> On 4/26/09, Patompong Kumdang <u500910052@xxxxxx> wrote: >>>>>>>>>>>>>>> Hello, >>>>>>>>>>>>>>> I heve sent this log file to you. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Thank you. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Tour. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Tour, >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Could you try to make a log file of your session >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> $ sudo wvdial 2>&1 | tee wvdial.out >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> send wvdial.out to us(list) >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> เน€เธ�เธ�เธข and attach output of >>>>>>>>>>>>>>>> $ sudo tail -f var/log/messages >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Report back presently. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Regards, >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Antonio >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> 2009/4/25 Patompong Kumdang <u500910052@xxxxxx>: >>>>>>>>>>>>>>>>> Antonio, >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> I don't know about how to choose driver to in stall, >>>>>>>>>>>>>>>>> I follow the step that Marv suggest. >>>>>>>>>>>>>>>>> My username and password is a free account in my >>>>>>>>>>>>>>>>> country.(it's >>>>>>>>>>>>>>>>> safe ) >>>>>>>>>>>>>>>>> In windows I don't use a special command. >>>>>>>>>>>>>>>>> Now, I guess my modem can't sent signal to server. >>>>>>>>>>>>>>>>> Do you listen the file that I sent to you. >>>>>>>>>>>>>>>> Yes, I get typically the same sound when I dialup too! >>>>>>>>>>>>>>>>> Thank you very much :) >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Tour. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> TouR, Marv >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> I don't know if this will make a difference, but since >>>>>>>>>>>>>>>>>> your >>>>>>>>>>>>>>>>>> using >>>>>>>>>>>>>>>>>> precompiled SLMODEMD with ALSA support, your alsa version >>>>>>>>>>>>>>>>>> is >>>>>>>>>>>>>>>>>> 1.0.19 >>>>>>>>>>>>>>>>>> and there does not exist a 1.0.19 >>>>>>>>>>>>>>>>>> SLMODEMD.gcc4.3_alsa1.0.19.tar.gz. >>>>>>>>>>>>>>>>>> Marv will it make a difference if he needs a >>>>>>>>>>>>>>>>>> gcc4.3_alsa1.0.19 >>>>>>>>>>>>>>>>>> SLMODEMD? เน€เธ�เธ�เธข He is having > difficulties getting >>>>>>>>>>>>>>>>>> connected to >>>>>>>>>>>>>>>>>> internet. >>>>>>>>>>>>>>>>>> This email sent to Marv, and Jacques not to list so your >>>>>>>>>>>>>>>>>> username >>>>>>>>>>>>>>>>>> and >>>>>>>>>>>>>>>>>> password will be safe! >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> TouR, >>>>>>>>>>>>>>>>>> my wvdial.conf file looks this way: >>>>>>>>>>>>>>>>>> [olivares@localhost ~]$ cat /etc/wvdial.conf >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> [Dialer Defaults] >>>>>>>>>>>>>>>>>> Init2 = ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90 >>>>>>>>>>>>>>>>>> Modem Type = Analog Modem >>>>>>>>>>>>>>>>>> Phone = 7072000 >>>>>>>>>>>>>>>>>> ISDN = 0 >>>>>>>>>>>>>>>>>> Username = myusername >>>>>>>>>>>>>>>>>> Init1 = ATZ >>>>>>>>>>>>>>>>>> Password = ************ >>>>>>>>>>>>>>>>>> Modem = /dev/ttySL0 >>>>>>>>>>>>>>>>>> Baud = 460800 >>>>>>>>>>>>>>>>>> Carrier Check = No >>>>>>>>>>>>>>>>>> Stupid Mode = 1 >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> A SLMODEMD with alsa 1.0.19 might be his best bet? >>>>>>>>>>>>>>>>>> เน€เธ�เธ�เธข Don't >>>>>>>>>>>>>>>>>> know >>>>>>>>>>>>>>>>>> if >>>>>>>>>>>>>>>>>> this >>>>>>>>>>>>>>>>>> makes a difference, but why not ask? >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> http://linmodems.technion.ac.il/packages/smartlink/ >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Here's your wvdial.con >>>>>>>>>>>>>>>>>> this is my wvdial.conf file >>>>>>>>>>>>>>>>>> ------------------------------------- >>>>>>>>>>>>>>>>>> [Dialer Defaults] >>>>>>>>>>>>>>>>>> Modem = /dev/ttySL0 >>>>>>>>>>>>>>>>>> Init1 = ATZ >>>>>>>>>>>>>>>>>> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>>>>>>>>>>>>>>> ;Stupid Mode = 1 >>>>>>>>>>>>>>>>>> Modem Type = Analog Modem >>>>>>>>>>>>>>>>>> Phone = 1222 >>>>>>>>>>>>>>>>>> ISDN = 0 >>>>>>>>>>>>>>>>>> Username = U89$0y)9@xxxxxxxxxxxxx >>>>>>>>>>>>>>>>>> Carrier Check = no >>>>>>>>>>>>>>>>>> Password = j4**9c+p >>>>>>>>>>>>>>>>>> Baud = 460800 >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Jacques, เน€เธ�เธ�เธข is a username > allow characters like >>>>>>>>>>>>>>>>>> ")" in >>>>>>>>>>>>>>>>>> wvdial.conf ? >>>>>>>>>>>>>>>>>> U89$0y)9@xxxxxxxxxxxxx เน€เธ�เธ�เธข ? >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> I am looking for what your ISP requires, but can't seem >>>>>>>>>>>>>>>>>> to >>>>>>>>>>>>>>>>>> find >>>>>>>>>>>>>>>>>> anything. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> http://www.tot.co.th/toten/index.php?option=com_content&task=view&id=363&Itemid=1121 >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> TouR >>>>>>>>>>>>>>>>>> Do you use any special commands or strings to connect via >>>>>>>>>>>>>>>>>> windows? >>>>>>>>>>>>>>>>>> It is strange that the connection can't seem to get >>>>>>>>>>>>>>>>>> through? >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> 2009/4/25 Patompong Kumdang <u500910052@xxxxxx>: >>>>>>>>>>>>>>>>>>> Antonio, >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Thanks. for your help. :) >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> I try to modify wvdial.conf, But it has the same >>>>>>>>>>>>>>>>>>> problem. >>>>>>>>>>>>>>>>>>> I attach file that contain the sound that I hear when >>>>>>>>>>>>>>>>>>> connect >>>>>>>>>>>>>>>>>>> using ubuntu (001.wav) and using windows >>>>>>>>>>>>>>>>>>> (003.wav)(windows >>>>>>>>>>>>>>>>>>> can >>>>>>>>>>>>>>>>>>> connect) >>>>>>>>>>>>>>>>>>> I guess my modem can't sent information to server? >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> and this is my log file >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> ---------------------------------------------------------- >>>>>>>>>>>>>>>>>>> Baud = 57,600 เน€เธ�เธ�เธข , +MS=34 >>>>>>>>>>>>>>>>>>> ---------------------------------------------------------- >>>>>>>>>>>>>>>>>>> --> WvDial: Internet dialer version 1.60 >>>>>>>>>>>>>>>>>>> --> Cannot get information for serial port. >>>>>>>>>>>>>>>>>>> --> Initializing modem. >>>>>>>>>>>>>>>>>>> --> Sending: ATZ >>>>>>>>>>>>>>>>>>> ATZ >>>>>>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>>>>>> --> Sending: ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=34 >>>>>>>>>>>>>>>>>>> ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=34 >>>>>>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>>>>>> --> Modem initialized. >>>>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>>>>>>>> --> No Carrier! เน€เธ�เธ�เธข Trying > again. >>>>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>>>>> --> Timed out while dialing. > เน€เธ�เธ�เธข Trying again. >>>>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>>>>> --> No Carrier! เน€เธ�เธ�เธข Trying > again. >>>>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>>>>> --> No Carrier! เน€เธ�เธ�เธข Trying > again. >>>>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>>>>> --> No Carrier! เน€เธ�เธ�เธข Trying > again. >>>>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> ------------------------------------------------------------------ >>>>>>>>>>>>>>>>>>> Baud = 57,600 เน€เธ�เธ�เธข ,+MS=90 >>>>>>>>>>>>>>>>>>> ------------------------------------------------------------------ >>>>>>>>>>>>>>>>>>> --> WvDial: Internet dialer version 1.60 >>>>>>>>>>>>>>>>>>> --> Cannot get information for serial port. >>>>>>>>>>>>>>>>>>> --> Initializing modem. >>>>>>>>>>>>>>>>>>> --> Sending: ATZ >>>>>>>>>>>>>>>>>>> ATZ >>>>>>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>>>>>> --> Sending: ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90 >>>>>>>>>>>>>>>>>>> ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90 >>>>>>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>>>>>> --> Modem initialized. >>>>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>>>>>>>> --> No Carrier! เน€เธ�เธ�เธข Trying > again. >>>>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> ------------------------------------------------ >>>>>>>>>>>>>>>>>>> Baud = 115,200 เน€เธ�เธ�เธข , +MS=90 >>>>>>>>>>>>>>>>>>> ------------------------------------------------ >>>>>>>>>>>>>>>>>>> --> WvDial: Internet dialer version 1.60 >>>>>>>>>>>>>>>>>>> --> Cannot get information for serial port. >>>>>>>>>>>>>>>>>>> --> Initializing modem. >>>>>>>>>>>>>>>>>>> --> Sending: ATZ >>>>>>>>>>>>>>>>>>> ATZ >>>>>>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>>>>>> --> Sending: ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90 >>>>>>>>>>>>>>>>>>> ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90 >>>>>>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>>>>>> --> Modem initialized. >>>>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>>>>>>>> --> No Carrier! เน€เธ�เธ�เธข Trying > again. >>>>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> --------------------------------------------------------- >>>>>>>>>>>>>>>>>>> Baud = 115,200 , เน€เธ�เธ�เธข +MS=34 >>>>>>>>>>>>>>>>>>> --------------------------------------------------------- >>>>>>>>>>>>>>>>>>> --> WvDial: Internet dialer version 1.60 >>>>>>>>>>>>>>>>>>> --> Cannot get information for serial port. >>>>>>>>>>>>>>>>>>> --> Initializing modem. >>>>>>>>>>>>>>>>>>> --> Sending: ATZ >>>>>>>>>>>>>>>>>>> ATZ >>>>>>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>>>>>> --> Sending: ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=34 >>>>>>>>>>>>>>>>>>> ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=34 >>>>>>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>>>>>> --> Modem initialized. >>>>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>>>>>>>> --> No Carrier! เน€เธ�เธ�เธข Trying > again. >>>>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> ------------------------------------------------------------------ >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Tour, >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Try to modify wvdial.conf from >>>>>>>>>>>>>>>>>>>> [Dialer Defaults] >>>>>>>>>>>>>>>>>>>> Modem = /dev/ttySL0 >>>>>>>>>>>>>>>>>>>> Init1 = ATZ >>>>>>>>>>>>>>>>>>>> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>>>>>>>>>>>>>>>>> ;Stupid Mode = 1 >>>>>>>>>>>>>>>>>>>> Modem Type = Analog Modem >>>>>>>>>>>>>>>>>>>> Phone = 1222 >>>>>>>>>>>>>>>>>>>> ISDN = 0 >>>>>>>>>>>>>>>>>>>> Username = U89$0y)9@xxxxxxxxxxxxx >>>>>>>>>>>>>>>>>>>> Carrier Check = no >>>>>>>>>>>>>>>>>>>> Password = ********** เน€เธ�เธ�เธข > <--- change this to >>>>>>>>>>>>>>>>>>>> ***** be >>>>>>>>>>>>>>>>>>>> careful >>>>>>>>>>>>>>>>>>>> with >>>>>>>>>>>>>>>>>>>> passwords others can take advantage when posting to >>>>>>>>>>>>>>>>>>>> list >>>>>>>>>>>>>>>>>>>> Baud = 460800 >>>>>>>>>>>>>>>>>>>> to >>>>>>>>>>>>>>>>>>>> [Dialer Defaults] >>>>>>>>>>>>>>>>>>>> Modem = /dev/ttySL0 >>>>>>>>>>>>>>>>>>>> Init1 = ATZ >>>>>>>>>>>>>>>>>>>> Init2 = ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90 > เน€เธ�เธ�เธข >>>>>>>>>>>>>>>>>>>> ย <--- >>>>>>>>>>>>>>>>>>>> เน€เธ�เธ�เธข add X3 >>>>>>>>>>>>>>>>>>>> option to >>>>>>>>>>>>>>>>>>>> skip dialtone checking, and add +MS=90 you may try >>>>>>>>>>>>>>>>>>>> +MS=34 >>>>>>>>>>>>>>>>>>>> if >>>>>>>>>>>>>>>>>>>> +MS=90 >>>>>>>>>>>>>>>>>>>> does not help you get connected >>>>>>>>>>>>>>>>>>>> Modem Type = Analog Modem >>>>>>>>>>>>>>>>>>>> Phone = 1222 >>>>>>>>>>>>>>>>>>>> Baud = 460800 เน€เธ�เธ�เธข ย <---- > you can also try >>>>>>>>>>>>>>>>>>>> lower bauds like >>>>>>>>>>>>>>>>>>>> 115,200 or >>>>>>>>>>>>>>>>>>>> 57,600 in case it is needed. >>>>>>>>>>>>>>>>>>>> ISDN = 0 >>>>>>>>>>>>>>>>>>>> Username = U89$0y)9@xxxxxxxxxxxxx >>>>>>>>>>>>>>>>>>>> Password = ********** >>>>>>>>>>>>>>>>>>>> Carrier Check = no >>>>>>>>>>>>>>>>>>>> Stupid Mode = 1 เน€เธ�เธ�เธข <--- > remove the ";", it >>>>>>>>>>>>>>>>>>>> might help get >>>>>>>>>>>>>>>>>>>> you >>>>>>>>>>>>>>>>>>>> connected >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Try that and report back. > เน€เธ�เธ�เธข Also, if for any >>>>>>>>>>>>>>>>>>>> reason you >>>>>>>>>>>>>>>>>>>> do >>>>>>>>>>>>>>>>>>>> not >>>>>>>>>>>>>>>>>>>> get >>>>>>>>>>>>>>>>>>>> connected, try reading the DOCs/wvdial.txt file. >>>>>>>>>>>>>>>>>>>> เน€เธ�เธ�เธข In >>>>>>>>>>>>>>>>>>>> that >>>>>>>>>>>>>>>>>>>> file it >>>>>>>>>>>>>>>>>>>> summarizes more of what I am recommending here. >>>>>>>>>>>>>>>>>>>> เน€เธ�เธ�เธข Also >>>>>>>>>>>>>>>>>>>> try to >>>>>>>>>>>>>>>>>>>> create >>>>>>>>>>>>>>>>>>>> a >>>>>>>>>>>>>>>>>>>> file that you may send should you fail to get >>>>>>>>>>>>>>>>>>>> connected. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> ## เน€เธ�เธ�เธข ย > เน€เธ�เธ�เธข To make a logfile >>>>>>>>>>>>>>>>>>>> wvdial.out >>>>>>>>>>>>>>>>>>>> $ sudo wvdial 2>&1 | tee wvdial.out >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> and attach wvdial.out to list. > เน€เธ�เธ�เธข You may >>>>>>>>>>>>>>>>>>>> also read up on >>>>>>>>>>>>>>>>>>>> Jacques' >>>>>>>>>>>>>>>>>>>> post-install troubleshooting guide/howto : >>>>>>>>>>>>>>>>>>>> http://linmodems.technion.ac.il/post-install.html >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Regards, >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Antonio >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> 2009/4/24 Patompong Kumdang <u500910052@xxxxxx>: >>>>>>>>>>>>>>>>>>>>> Hello, >>>>>>>>>>>>>>>>>>>>> I'm Tour, Thailand >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> I cannot connect to internet by using my internal >>>>>>>>>>>>>>>>>>>>> modem. >>>>>>>>>>>>>>>>>>>>> I use ubuntu 8.1 เน€เธ�เธ�เธข > kernel 2.6.27-10-generic >>>>>>>>>>>>>>>>>>>>> when I connect, I can hear the dial tone like as >>>>>>>>>>>>>>>>>>>>> connect >>>>>>>>>>>>>>>>>>>>> by >>>>>>>>>>>>>>>>>>>>> windows, >>>>>>>>>>>>>>>>>>>>> But the sound that I hear not the same, It stop sound >>>>>>>>>>>>>>>>>>>>> later. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> (I guss you เน€เธ�เธ�เธข know > that I tell, my english >>>>>>>>>>>>>>>>>>>>> not very >>>>>>>>>>>>>>>>>>>>> well) >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> this is my wvdial.conf >>>>>>>>>>>>>>>>>>>>> ------------------------------------------- >>>>>>>>>>>>>>>>>>>>> root@tourcom-laptop:/home/tourcom# wvdialconf >>>>>>>>>>>>>>>>>>>>> /etc/wvdial.conf >>>>>>>>>>>>>>>>>>>>> Editing `/etc/wvdial.conf'. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Scanning your serial ports for a modem. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Modem Port Scan<*1>: S0 > เน€เธ�เธ�เธข ย S1 > เน€เธ�เธ�เธข >>>>>>>>>>>>>>>>>>>>> ย S2 เน€เธ�เธ�เธข ย S3 >>>>>>>>>>>>>>>>>>>>> WvModem<*1>: Cannot get information for serial port. >>>>>>>>>>>>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 -- OK >>>>>>>>>>>>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 Z -- OK >>>>>>>>>>>>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 -- OK >>>>>>>>>>>>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK >>>>>>>>>>>>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK >>>>>>>>>>>>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK >>>>>>>>>>>>>>>>>>>>> ttySL0<*1>: Modem Identifier: ATI -- SmartLink Soft >>>>>>>>>>>>>>>>>>>>> Modem >>>>>>>>>>>>>>>>>>>>> ttySL0<*1>: Speed 4800: AT -- OK >>>>>>>>>>>>>>>>>>>>> ttySL0<*1>: Speed 9600: AT -- OK >>>>>>>>>>>>>>>>>>>>> ttySL0<*1>: Speed 19200: AT -- OK >>>>>>>>>>>>>>>>>>>>> ttySL0<*1>: Speed 38400: AT -- OK >>>>>>>>>>>>>>>>>>>>> ttySL0<*1>: Speed 57600: AT -- OK >>>>>>>>>>>>>>>>>>>>> ttySL0<*1>: Speed 115200: AT -- OK >>>>>>>>>>>>>>>>>>>>> ttySL0<*1>: Speed 230400: AT -- OK >>>>>>>>>>>>>>>>>>>>> ttySL0<*1>: Speed 460800: AT -- OK >>>>>>>>>>>>>>>>>>>>> ttySL0<*1>: Max speed is 460800; that should be safe. >>>>>>>>>>>>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Found a modem on /dev/ttySL0. >>>>>>>>>>>>>>>>>>>>> Modem configuration written to /etc/wvdial.conf. >>>>>>>>>>>>>>>>>>>>> ttySL0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 >>>>>>>>>>>>>>>>>>>>> &D2 >>>>>>>>>>>>>>>>>>>>> +FCLASS=0" >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> this is the script when I connect >>>>>>>>>>>>>>>>>>>>> ---------------------------------------------------------- >>>>>>>>>>>>>>>>>>>>> Script started on Sat 25 Apr 2009 09:48:30 AM ICT >>>>>>>>>>>>>>>>>>>>> เน€เธ�เธ�เธข > ]0;root@tourcom-laptop: /home/tourcom >>>>>>>>>>>>>>>>>>>>> root@tourcom-laptop:/home/tourcom# >>>>>>>>>>>>>>>>>>>>> wvdial >>>>>>>>>>>>>>>>>>>>> --> WvDial: Internet dialer version 1.60 >>>>>>>>>>>>>>>>>>>>> --> Cannot get information for serial port. >>>>>>>>>>>>>>>>>>>>> --> Initializing modem. >>>>>>>>>>>>>>>>>>>>> --> Sending: ATZ >>>>>>>>>>>>>>>>>>>>> ATZ >>>>>>>>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>>>>>>>> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>>>>>>>>>>>>>>>>>> ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>>>>>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>>>>>>>> --> Modem initialized. >>>>>>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>>>>>>>>>> --> No Carrier! เน€เธ�เธ�เธข > Trying again. >>>>>>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>>>>>>> ^CCaught signal 2: เน€เธ�เธ�เธข > Attempting to exit >>>>>>>>>>>>>>>>>>>>> gracefully... >>>>>>>>>>>>>>>>>>>>> --> Disconnecting at Sat Apr 25 09:49:42 2009 >>>>>>>>>>>>>>>>>>>>> เน€เธ�เธ�เธข > ]0;root@tourcom-laptop: /home/tourcom >>>>>>>>>>>>>>>>>>>>> root@tourcom-laptop:/home/tourcom# >>>>>>>>>>>>>>>>>>>>> exit >>>>>>>>>>>>>>>>>>>>> exit >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Script done on Sat 25 Apr 2009 09:49:45 AM ICT >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> this is my wvdial.conf file >>>>>>>>>>>>>>>>>>>>> ------------------------------------- >>>>>>>>>>>>>>>>>>>>> [Dialer Defaults] >>>>>>>>>>>>>>>>>>>>> Modem = /dev/ttySL0 >>>>>>>>>>>>>>>>>>>>> Init1 = ATZ >>>>>>>>>>>>>>>>>>>>> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>>>>>>>>>>>>>>>>>> ;Stupid Mode = 1 >>>>>>>>>>>>>>>>>>>>> Modem Type = Analog Modem >>>>>>>>>>>>>>>>>>>>> Phone = 1222 >>>>>>>>>>>>>>>>>>>>> ISDN = 0 >>>>>>>>>>>>>>>>>>>>> Username = U89$0y)9@xxxxxxxxxxxxx >>>>>>>>>>>>>>>>>>>>> Carrier Check = no >>>>>>>>>>>>>>>>>>>>> Password = j4**9c+p >>>>>>>>>>>>>>>>>>>>> Baud = 460800 >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> <div><br></div> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> <div><br></div> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> <div><br></div> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>> >>>>> >>>> >>> >>> >> >> > > >
