libvirt

• Thread Index

• [PATCH 1/1] Revert "Revert "qemu: Temporary disable owner remembering""
  • From: Daniel Henrique Barboza
• Re: [jenkins-ci PATCH v2 11/20] quayadmin: Add support for the PUT method
  • From: Daniel P. Berrangé
• Re: [jenkins-ci PATCH v2 10/20] quayadmin: Read configuration from file
  • From: Daniel P. Berrangé
• Re: [jenkins-ci PATCH v2 09/20] quayadmin: Introduce configuration object
  • From: Daniel P. Berrangé
• Re: [jenkins-ci PATCH v2 08/20] quayadmin: Remove clientid and clientsecret
  • From: Daniel P. Berrangé
• Re: [jenkins-ci PATCH v2 07/20] quayadmin: Implement debug mode
  • From: Daniel P. Berrangé
• Re: [jenkins-ci PATCH v2 06/20] quayadmin: Build endpoint, params and payload separately
  • From: Daniel P. Berrangé
• Re: [jenkins-ci PATCH v2 05/20] quayadmin: Tweak list-repos output format
  • From: Daniel P. Berrangé
• Re: [jenkins-ci PATCH v2 04/20] quayadmin: Tweak show-repo output format
  • From: Daniel P. Berrangé
• Re: [jenkins-ci PATCH v2 03/20] quayadmin: Tweak quiet logic
  • From: Daniel P. Berrangé
• Re: [PATCH 2/2] docs: news: add per-release links
  • From: Kashyap Chamarthy
• Re: [PATCH 0/5] network: xmlns dnsmasq option passthrough
  • From: Laine Stump
• Re: [PATCH 7/7] docs: remove "Since" references older than 1.1.1
  • From: Peter Krempa
• Re: [PATCH 6/7] docs: formatdomain: remove "Since" references older than 1.1.1
  • From: Peter Krempa
• Re: [PATCH 2/2] qemu: blockjob: Update new job state earlier in qemuBlockJobEventProcessLegacy
  • From: Ján Tomko
• Re: [PATCH 0/2] qemu: blockjob: Tweak config saving in legacy block job handling (blockdev-add saga)
  • From: Ján Tomko
• Re: [PATCH v2 12/25] qemu: driver: Remove unnecessary saving of status XML
  • From: Ján Tomko
• Re: [PATCH 0/7] docs: assorted cleanups (virtio-fs epopee)
  • From: Peter Krempa
• Re: [PATCH 1/2] docs: news: remove sed sorcery
  • From: Peter Krempa
• Re: [PATCH v1 11/31] conf: Format and parse NVMe type disk
  • From: Peter Krempa
• Re: [PATCH 2/2] docs: news: add per-release links
  • From: Andrea Bolognani
• Re: [PATCH 1/2] docs: news: remove sed sorcery
  • From: Ján Tomko
• Re: [PATCH v1 11/31] conf: Format and parse NVMe type disk
  • From: Michal Privoznik
• Re: [PATCH 1/2] docs: news: remove sed sorcery
  • From: Peter Krempa
• Re: [PATCH 1/2] docs: news: remove sed sorcery
  • From: Andrea Bolognani
• [PATCH 2/2] docs: news: add per-release links
  • From: Ján Tomko
• [PATCH 1/2] docs: news: remove sed sorcery
  • From: Ján Tomko
• [PATCH 0/2] docs: news: add per-release links
  • From: Ján Tomko
• [PATCH v2 12/25] qemu: driver: Remove unnecessary saving of status XML
  • From: Peter Krempa
• [PATCH 1/2] qemu: blockjob: Save config only in qemuBlockJobEventProcessLegacyCompleted
  • From: Peter Krempa
• [PATCH 2/2] qemu: blockjob: Update new job state earlier in qemuBlockJobEventProcessLegacy
  • From: Peter Krempa
• [PATCH 0/2] qemu: blockjob: Tweak config saving in legacy block job handling (blockdev-add saga)
  • From: Peter Krempa
• [PATCH v4 8/8] qemu_driver: hook up query-cpu-model-comparison
  • From: Collin Walling
• [PATCH v4 2/8] qemu_monitor: implement query-cpu-model-baseline
  • From: Collin Walling
• [PATCH v4 3/8] qemu_capabilities: introduce QEMU_CAPS_QUERY_CPU_MODEL_BASELINE
  • From: Collin Walling
• [PATCH v4 0/8] CPU Model Baseline and Comparison for s390x
  • From: Collin Walling
• [PATCH v4 6/8] qemu_capabilities: introduce QEMU_CAPS_QUERY_CPU_MODEL_COMPARISON
  • From: Collin Walling
• [PATCH v4 4/8] qemu_driver: hook up query-cpu-model-baseline
  • From: Collin Walling
• [PATCH v4 7/8] cpu_conf: xml to cpu definition parse helper
  • From: Collin Walling
• [PATCH v4 5/8] qemu_monitor: implement query-cpu-model-comparison
  • From: Collin Walling
• [PATCH v4 1/8] qemu_monitor: helper functions for CPU models
  • From: Collin Walling
• Re: [jenkins-ci PATCH v2 02/20] quayadmin: Fix argument parsing for delete-repo
  • From: Daniel P. Berrangé
• [jenkins-ci PATCH v2 20/20] quayadmin: Add delete-tag command
  • From: Andrea Bolognani
• [jenkins-ci PATCH v2 18/20] quayadmin: Add show-tag command
  • From: Andrea Bolognani
• [jenkins-ci PATCH v2 17/20] quayadmin: Add list-tags command
  • From: Andrea Bolognani
• [jenkins-ci PATCH v2 19/20] quayadmin: Add create-tag command
  • From: Andrea Bolognani
• [jenkins-ci PATCH v2 16/20] quayadmin: Add show-build command
  • From: Andrea Bolognani
• [jenkins-ci PATCH v2 15/20] quayadmin: Add list-builds command
  • From: Andrea Bolognani
• [jenkins-ci PATCH v2 14/20] quayadmin: Add activate-trigger command
  • From: Andrea Bolognani
• [jenkins-ci PATCH v2 13/20] quayadmin: Add show-trigger command
  • From: Andrea Bolognani
• [jenkins-ci PATCH v2 12/20] quayadmin: Add list-triggers command
  • From: Andrea Bolognani
• [jenkins-ci PATCH v2 11/20] quayadmin: Add support for the PUT method
  • From: Andrea Bolognani
• [jenkins-ci PATCH v2 10/20] quayadmin: Read configuration from file
  • From: Andrea Bolognani
• [jenkins-ci PATCH v2 09/20] quayadmin: Introduce configuration object
  • From: Andrea Bolognani
• [jenkins-ci PATCH v2 08/20] quayadmin: Remove clientid and clientsecret
  • From: Andrea Bolognani
• [jenkins-ci PATCH v2 04/20] quayadmin: Tweak show-repo output format
  • From: Andrea Bolognani
• [jenkins-ci PATCH v2 07/20] quayadmin: Implement debug mode
  • From: Andrea Bolognani
• [jenkins-ci PATCH v2 05/20] quayadmin: Tweak list-repos output format
  • From: Andrea Bolognani
• [jenkins-ci PATCH v2 03/20] quayadmin: Tweak quiet logic
  • From: Andrea Bolognani
• [jenkins-ci PATCH v2 01/20] quayadmin: Import initial implementation
  • From: Andrea Bolognani
• [jenkins-ci PATCH v2 06/20] quayadmin: Build endpoint, params and payload separately
  • From: Andrea Bolognani
• [jenkins-ci PATCH v2 02/20] quayadmin: Fix argument parsing for delete-repo
  • From: Andrea Bolognani
• [jenkins-ci PATCH v2 00/20] quayadmin: Introduce Quay API client
  • From: Andrea Bolognani
• [PATCH 5/7] docs: formatdomain: tsc is supported by QEMU
  • From: Ján Tomko
• [PATCH 6/7] docs: formatdomain: remove "Since" references older than 1.1.1
  • From: Ján Tomko
• [PATCH 4/7] docs: formatdomain: remove stray nbsp
  • From: Ján Tomko
• [PATCH 3/7] docs: drvqemu: remove relative time reference
  • From: Ján Tomko
• [PATCH 2/7] docs: drvqemu: fix a typo
  • From: Ján Tomko
• [PATCH 1/7] docs: link to networkportformat.html in format.html
  • From: Ján Tomko
• [PATCH 7/7] docs: remove "Since" references older than 1.1.1
  • From: Ján Tomko
• [PATCH 0/7] docs: assorted cleanups (virtio-fs epopee)
  • From: Ján Tomko
• Re: [PATCH v1 11/31] conf: Format and parse NVMe type disk
  • From: Michal Privoznik
• Re: [jenkins-ci PATCH 10/20] quayadmin: Read configuration from file
  • From: Andrea Bolognani
• Re: [jenkins-ci PATCH 03/20] quayadmin: Fix quiet mode for show-repo
  • From: Andrea Bolognani
• Re: [jenkins-ci PATCH 02/20] quayadmin: Fix argument parsing for delete-repo
  • From: Andrea Bolognani
• Re: [jenkins-ci PATCH 01/20] quayadmin: Import initial implementation
  • From: Daniel P. Berrangé
• Re: [jenkins-ci PATCH 09/20] quayamdin: Introduce configuration object
  • From: Ján Tomko
• Re: [jenkins-ci PATCH 02/20] quayadmin: Fix argument parsing for delete-repo
  • From: Ján Tomko
• Re: [jenkins-ci PATCH 01/20] quayadmin: Import initial implementation
  • From: Ján Tomko
• Re: [jenkins-ci PATCH 10/20] quayadmin: Read configuration from file
  • From: Daniel P. Berrangé
• Re: [jenkins-ci PATCH 03/20] quayadmin: Fix quiet mode for show-repo
  • From: Daniel P. Berrangé
• [jenkins-ci PATCH 20/20] quayadmin: Add delete-tag command
  • From: Andrea Bolognani
• [jenkins-ci PATCH 19/20] quayadmin: Add create-tag command
  • From: Andrea Bolognani
• [jenkins-ci PATCH 18/20] quayadmin: Add show-tag command
  • From: Andrea Bolognani
• [jenkins-ci PATCH 17/20] quayadmin: Add list-tags command
  • From: Andrea Bolognani
• [jenkins-ci PATCH 16/20] quayadmin: Add show-build command
  • From: Andrea Bolognani
• [jenkins-ci PATCH 11/20] quayadmin: Add support for the PUT method
  • From: Andrea Bolognani
• [jenkins-ci PATCH 15/20] quayadmin: Add list-builds command
  • From: Andrea Bolognani
• [jenkins-ci PATCH 08/20] quayadmin: Remove clientid and clientsecret
  • From: Andrea Bolognani
• [jenkins-ci PATCH 13/20] quayadmin: Add show-trigger command
  • From: Andrea Bolognani
• [jenkins-ci PATCH 10/20] quayadmin: Read configuration from file
  • From: Andrea Bolognani
• [jenkins-ci PATCH 06/20] quayadmin: Build endpoint, params and payload separately
  • From: Andrea Bolognani
• [jenkins-ci PATCH 05/20] quayadmin: Tweak list-repos output format
  • From: Andrea Bolognani
• [jenkins-ci PATCH 09/20] quayamdin: Introduce configuration object
  • From: Andrea Bolognani
• [jenkins-ci PATCH 04/20] quayadmin: Tweak show-repo output format
  • From: Andrea Bolognani
• [jenkins-ci PATCH 07/20] quayadmin: Implement debug mode
  • From: Andrea Bolognani
• [jenkins-ci PATCH 14/20] quayadmin: Add activate-trigger command
  • From: Andrea Bolognani
• [jenkins-ci PATCH 03/20] quayadmin: Fix quiet mode for show-repo
  • From: Andrea Bolognani
• [jenkins-ci PATCH 02/20] quayadmin: Fix argument parsing for delete-repo
  • From: Andrea Bolognani
• [jenkins-ci PATCH 12/20] quayadmin: Add list-triggers command
  • From: Andrea Bolognani
• [jenkins-ci PATCH 00/20] quayadmin: Introduce Quay API client
  • From: Andrea Bolognani
• [jenkins-ci PATCH 01/20] quayadmin: Import initial implementation
  • From: Andrea Bolognani
• Re: [PATCH 09/29] remote: conditionalize IP socket config in augeas definitions
  • From: Daniel P. Berrangé
• [PATCH Rust 2/4] remove duplicated macro
  • From: Sahid Orentino Ferdjaoui
• [PATCH Rust 3/4] fix pointer type of macro used to convert rs string to c string
  • From: Sahid Orentino Ferdjaoui
• [PATCH Rust 4/4] fix email address in Cargo.toml + update README
  • From: Sahid Orentino Ferdjaoui
• [PATCH Rust 1/4] connect: cleanup around Connect::open_auth()'s method
  • From: Sahid Orentino Ferdjaoui
• [PATCH] test_driver: implement virDomainMemoryStats
  • From: Ilias Stamatis
• Re: [PATCH v1 10/31] schemas: Introduce disk type NVMe
  • From: Michal Privoznik
• Re: [PATCH v1 27/31] virSecuritySELinuxRestoreImageLabelInt: Don't skip non-local storage
  • From: Peter Krempa
• Re: [PATCH v1 31/31] qemu_hotplug: Prepare NVMe disks on hotplug
  • From: Peter Krempa
• Re: [PATCH v9 02/13] backup: Introduce virDomainCheckpoint APIs
  • From: Cole Robinson
• Re: [PATCH v9 03/13] backup: Document nuances between different state capture APIs
  • From: Cole Robinson
• Re: [PATCH v1 30/31] qemu: Don't leak storage perms on failure in qemuDomainAttachDiskGeneric
  • From: Peter Krempa
• Re: [PATCH v1 29/31] qemu: Generate command line of NVMe disks
  • From: Peter Krempa
• Re: [PATCH v1 26/31] security_selinux: Simplify virSecuritySELinuxSetImageLabelInternal
  • From: Peter Krempa
• Re: [PATCH v1 25/31] qemu: Allow NVMe disk in CGroups
  • From: Peter Krempa
• Re: [PATCH v1 24/31] qemu: Create NVMe disk in domain namespace
  • From: Peter Krempa
• Re: [PATCH v1 05/31] virpcimock: Create driver_override file in device dirs
  • From: Michal Privoznik
• Re: [PATCH v1 03/31] virpcimock: Move actions checking one level up
  • From: Michal Privoznik
• Re: [PATCH v1 23/31] qemu_domain: Introduce NVMe path getting helpers
  • From: Peter Krempa
• Re: [PATCH v1 22/31] qemu_domain: Separate VFIO code
  • From: Peter Krempa
• Re: [PATCH v1 21/31] domain_conf: Introduce virDomainDefHasNVMeDisk
  • From: Peter Krempa
• Re: [PATCH v1 20/31] virstoragefile: Introduce virStorageSourceChainHasNVMe
  • From: Peter Krempa
• Re: [PATCH v1 18/31] qemu: prepare NVMe devices too
  • From: Peter Krempa
• Re: [PATCH v1 19/31] qemu: Take NVMe disks into account when calculating memlock limit
  • From: Peter Krempa
• Re: [PATCH v1 17/31] virhostdevtest: Test virNVMeDevice assignment
  • From: Peter Krempa
• Re: [PATCH v1 16/31] virpcimock: Introduce NVMe driver and devices
  • From: Peter Krempa
• Re: [PATCH v1 15/31] virhostdevtest: s/CHECK_LIST_COUNT/CHECK_PCI_LIST_COUNT/
  • From: Peter Krempa
• Re: [PATCH v1 14/31] virhostdevtest: Don't proceed to test cases if init failed
  • From: Peter Krempa
• Re: [PATCH v1 12/31] util: Introduce virNVMeDevice module
  • From: Peter Krempa
• Re: [PATCH 0/9] qemu: refactor fsdev formatting (virtio-fs epopee)
  • From: Peter Krempa
• Re: [PATCH 6/9] qemu: command: use VIR_AUTOFREE in qemuBuildFSDevCommandLine
  • From: Peter Krempa
• Re: [PATCH 09/29] remote: conditionalize IP socket config in augeas definitions
  • From: Boris Fiuczynski
• Re: [PATCH v1 11/31] conf: Format and parse NVMe type disk
  • From: Peter Krempa
• Re: [PATCH v1 11/31] conf: Format and parse NVMe type disk
  • From: Peter Krempa
• Re: [PATCH v1 10/31] schemas: Introduce disk type NVMe
  • From: Peter Krempa
• Re: [PATCH v1 09/31] qemuDomainDeviceDefValidateDisk: Reorder some checks
  • From: Peter Krempa
• Re: [PATCH v1 08/31] virpci: Introduce virPCIDeviceAddressCopy
  • From: Peter Krempa
• Re: [PATCH v1 07/31] virPCIDeviceAddressAsString: Fix const correctness
  • From: Peter Krempa
• Re: [PATCH v1 06/31] virPCIDeviceAddressEqual: Fix const correctness
  • From: Peter Krempa
• Re: [PATCH v1 05/31] virpcimock: Create driver_override file in device dirs
  • From: Peter Krempa
• Re: [PATCH v1 03/31] virpcimock: Move actions checking one level up
  • From: Peter Krempa
• Re: [PATCH v1 02/31] virHostdevReAttachPCIDevices: Separate out function body
  • From: Peter Krempa
• Re: [PATCH v1 01/31] virHostdevPreparePCIDevices: Separate out function body
  • From: Peter Krempa
• Re: [PATCH v2 4/4] virCommand: use procfs to learn opened FDs
  • From: Ján Tomko
• Re: [PATCH v2 2/4] test: Introduce virnetdevopenvswitchtest
  • From: Ján Tomko
• Re: [PATCH v2 1/4] virNetDevOpenvswitchInterfaceStats: Optimize for speed
  • From: Ján Tomko
• [PATCH 9/9] qemu: command: remove qemuDomainFSDriver
  • From: Ján Tomko
• [PATCH 7/9] qemu: introduce qemuDomainDeviceDefValidateFS
  • From: Ján Tomko
• [PATCH 6/9] qemu: command: use VIR_AUTOFREE in qemuBuildFSDevCommandLine
  • From: Ján Tomko
• [PATCH 3/9] qemu: address: remove useless comment
  • From: Ján Tomko
• [PATCH 8/9] qemu: command: use VIR_AUTOCLEAN in qemuBuildFS*
  • From: Ján Tomko
• [PATCH 5/9] qemu: command: re-introduce qemuBuildFSDevCommandLine
  • From: Ján Tomko
• [PATCH 1/9] tests: qemu: minimize fs9p.xml
  • From: Ján Tomko
• [PATCH 4/9] qemu: command: rename qemuBuildFSDevCommandLine
  • From: Ján Tomko
• [PATCH 0/9] qemu: refactor fsdev formatting (virtio-fs epopee)
  • From: Ján Tomko
• [PATCH 2/9] qemu: add CAPS_LATEST tests for 9pfs
  • From: Ján Tomko
• [PATCH v2 4/4] virCommand: use procfs to learn opened FDs
  • From: Michal Privoznik
• [PATCH v2 2/4] test: Introduce virnetdevopenvswitchtest
  • From: Michal Privoznik
• [PATCH v2 1/4] virNetDevOpenvswitchInterfaceStats: Optimize for speed
  • From: Michal Privoznik
• [PATCH v2 3/4] vircommand: Separate mass FD closing into a function
  • From: Michal Privoznik
• [PATCH v2 0/4] Optimize mass closing of FDs on child spwaning
  • From: Michal Privoznik
• Re: [PATCH 00/19] Add vhost-user-gpu support
  • From: Marc-André Lureau
• [PATCH v2] qapi: add dirty-bitmaps to query-named-block-nodes result
  • From: John Snow
• Re: [PATCH 3/3] virCommand: use procfs to learn opened FDs
  • From: Florian Weimer
• Re: [PATCH 3/3] virCommand: use procfs to learn opened FDs
  • From: Eric Blake
• Re: [PATCH 3/3] virCommand: use procfs to learn opened FDs
  • From: Florian Weimer
• Re: [PATCH 3/3] virCommand: use procfs to learn opened FDs
  • From: Eric Blake
• Re: [PATCH] tests: don't assume "localhost" only resolves to 1/2 IPs
  • From: Michal Privoznik
• [PATCH] tests: don't assume "localhost" only resolves to 1/2 IPs
  • From: Daniel P. Berrangé
• Re: [PATCH 25/25] qemu: hotplug: Transfer ownership of backing chain to block job on disk unplug
  • From: Ján Tomko
• Re: [PATCH 24/25] qemu: blockjob: Unplug inherited storage chains when concluding blockjob
  • From: Ján Tomko
• Re: [PATCH 23/25] qemu: Detect managed persistent reservations in block job orphan chains
  • From: Ján Tomko
• Re: [PATCH 22/25] qemu: blockjob: Track orphaned backing chains in blockjob status XML
  • From: Ján Tomko
• Re: [PATCH 21/25] conf: export virDomainDiskBackingStoreFormat
  • From: Ján Tomko
• Re: [PATCH 20/25] conf: export virDomainDiskBackingStoreParse
  • From: Ján Tomko
• Re: [PATCH 19/25] qemu: process: Refresh -blockdev based blockjobs on reconnect to qemu
  • From: Ján Tomko
• Re: [PATCH 18/25] qemu: blockjob: Add modern block job event handler
  • From: Ján Tomko
• Re: [PATCH 17/25] qemu: Add handler for job state change event
  • From: Ján Tomko
• Re: [PATCH 16/25] qemu: blockjob: Add helper to convert monitor job status to internal state
  • From: Ján Tomko
• Re: [PATCH 15/25] qemu: process: Don't trigger BLOCK_JOB* events with -blockdev
  • From: Ján Tomko
• Re: [PATCH 14/25] qemu: blockjob: Add 'concluded' state for a block job
  • From: Ján Tomko
• Re: [libvirt-php PATCH 0/2] Add binding for virDomainInterfaceAddresses
  • From: Michal Privoznik
• Re: [PATCH 13/25] tests: qemustatusxml2xml: Add test case for block job tracking
  • From: Ján Tomko
• Re: [PATCH 12/25] qemu: driver: Remove unnecessary saving of status XML
  • From: Ján Tomko
• Re: [PATCH 3/3] virCommand: use procfs to learn opened FDs
  • From: Daniel P. Berrangé
• Re: [PATCH 1/2] virsh-completer: Separate comma list construction into a function
  • From: Michal Privoznik
• Re: [PATCH 3/3] virCommand: use procfs to learn opened FDs
  • From: Florian Weimer
• Re: [PATCH 3/3] virCommand: use procfs to learn opened FDs
  • From: Eric Blake
• Re: [PATCH 02/25] qemu: domain: Add helper for saving config XML
  • From: Ján Tomko
• Re: [PATCH 11/25] qemu: blockjob: Save status XML when modifying job state
  • From: Ján Tomko
• Re: [PATCH 10/25] qemu: domain: Store blockjob data in the status XML
  • From: Ján Tomko
• Re: [PATCH 09/25] qemu: blockjob: Add flag for invalid block job data
  • From: Ján Tomko
• Re: [PATCH 01/25] qemu: domain: Repurpose and export helper for saving domain status XML
  • From: Ján Tomko
• Re: [PATCH 08/25] qemu: blockjob: Export functions for allocating and registering job data
  • From: Ján Tomko
• Re: [PATCH 07/25] qemu: blockjob: Add string convertors for blockjob type and state enums
  • From: Ján Tomko
• Re: [PATCH] test_driver: implement virDomainSetMemoryParameters
  • From: Erik Skultety
• Re: [PATCH 06/25] qemu: blockjob: Register new and running blockjobs in the global table
  • From: Ján Tomko
• Re: [PATCH 05/25] qemu: domain: Add global table of blockjobs
  • From: Ján Tomko
• Re: [PATCH 04/25] qemu: blockjob: Separate and unify block job (un)registration
  • From: Ján Tomko
• Re: [PATCH 03/25] qemu: blockjob: Use VIR_AUTOUNREF in qemuBlockJobDataNew
  • From: Ján Tomko
• Re: [PATCH] test_driver: implement virDomainSetUserPassword
  • From: Erik Skultety
• Re: [PATCH] all: don't wait for driver lock during startup
  • From: Erik Skultety
• Re: [PATCH] interface: fix driver name in state directory path
  • From: Erik Skultety
• [PATCH] interface: fix driver name in state directory path
  • From: Daniel P. Berrangé
• [PATCH] all: don't wait for driver lock during startup
  • From: Daniel P. Berrangé
• Re: [PATCH 5/5] libvirt_nss: Report newer addresses first
  • From: Michal Privoznik
• Re: [PATCH] security: aa-helper: allow virt-aa-helper to read .vhd images
  • From: Christian Ehrhardt
• Re: [PATCH 1/2] virsh-completer: Separate comma list construction into a function
  • From: Erik Skultety
• Re: [PATCH v3 0/2] add support for bochs-video device
  • From: Andrea Bolognani
• Re: [PATCH v3 0/2] add support for bochs-video device
  • From: Ján Tomko
• Re: [PATCH 5/5] libvirt_nss: Report newer addresses first
  • From: Erik Skultety
• Re: [PATCH] qemu: Relax os.loader->type check when validating domain
  • From: Andrea Bolognani
• Re: [PATCH 4/5] libvirt_nss: Pass @name to appendAddr()
  • From: Erik Skultety
• Re: [PATCH 3/5] libvirt_nss: Drop some needless cleanup labels
  • From: Erik Skultety
• Re: [PATCH 2/5] libvirt_nss: Use VIR_AUTOPTR and VIR_AUTOFREE
  • From: Erik Skultety
• Re: [PATCH 1/5] libvirt_nss: Use VIR_STEAL_PTR() in findLease()
  • From: Erik Skultety
• [PATCH 4/5] network: wire up dnsmasq option xmlns
  • From: Cole Robinson
• [PATCH 2/5] conf: Add network xmlopt argument
  • From: Cole Robinson
• [PATCH 1/5] conf: Add virNetworkXMLOption
  • From: Cole Robinson
• [PATCH 5/5] docs: formatnetwork: Document xmlns:dnsmasq
  • From: Cole Robinson
• [PATCH 0/5] network: xmlns dnsmasq option passthrough
  • From: Cole Robinson
• [PATCH 3/5] conf: Add virNetworkXMLNamespace
  • From: Cole Robinson
• Re: [PATCH 3/3] virCommand: use procfs to learn opened FDs
  • From: Florian Weimer
• Re: [libvirt-php PATCH 0/2] Add binding for virDomainInterfaceAddresses
  • From: Dawid Zamirski
• Re: [PATCH 3/3] virCommand: use procfs to learn opened FDs
  • From: Michal Prívozník
• Re: [PATCH v2 0/3] Add missing pool list types
  • From: Michal Prívozník
• Re: [PATCH 3/3] virCommand: use procfs to learn opened FDs
  • From: Eric Blake
• [PATCH 3/5] libvirt_nss: Drop some needless cleanup labels
  • From: Michal Privoznik
• [PATCH 5/5] libvirt_nss: Report newer addresses first
  • From: Michal Privoznik
• [PATCH 1/5] libvirt_nss: Use VIR_STEAL_PTR() in findLease()
  • From: Michal Privoznik
• [PATCH 4/5] libvirt_nss: Pass @name to appendAddr()
  • From: Michal Privoznik
• [PATCH 2/5] libvirt_nss: Use VIR_AUTOPTR and VIR_AUTOFREE
  • From: Michal Privoznik
• [PATCH 0/5] libvirt_nss: Report newer addresses first
  • From: Michal Privoznik
• Re: [PATCH 3/3] virCommand: use procfs to learn opened FDs
  • From: Michal Prívozník
• [PATCH] qemu: Relax os.loader->type check when validating domain
  • From: Michal Privoznik
• Re: [PATCH 1/3] virNetDevOpenvswitchInterfaceStats: Optimize for speed
  • From: Michal Prívozník
• [PATCH] maint: RNG comment fix
  • From: Eric Blake
• [PATCH v3 1/2] qemu: Add bochs-display capability
  • From: Jonathon Jongsma
• [PATCH v3 0/2] add support for bochs-video device
  • From: Jonathon Jongsma
• [PATCH v3 2/2] qemu: add 'bochs' video display type
  • From: Jonathon Jongsma
• [PATCH] tests: skip systemd activation test if FDs 3/4/5 are open
  • From: Daniel P. Berrangé
• Re: [PATCH] security: aa-helper: allow virt-aa-helper to read .vhd images
  • From: Jamie Strandboge
• Re: [PATCH 3/3] virCommand: use procfs to learn opened FDs
  • From: Eric Blake
• Re: [PATCH 2/3] vircommand: Separate mass FD closing into a function
  • From: Ján Tomko
• Re: [PATCH 1/3] virNetDevOpenvswitchInterfaceStats: Optimize for speed
  • From: Ján Tomko
• [PATCH v5 17/20] tpm: Pass migration key passphrase via fd to swtpm
  • From: Stefan Berger
• [PATCH v5 13/20] utils: Mark inpipe as non-blocking
  • From: Stefan Berger
• [PATCH v5 12/20] utils: Convert pollfd array to be allocated
  • From: Stefan Berger
• [PATCH v5 09/20] tpm: Check whether previously found executables were updated
  • From: Stefan Berger
• [PATCH v5 02/20] tests: Add already existing test case tpm-emulator-tpm2
  • From: Stefan Berger
• [PATCH v5 07/20] tpm: Move qemuTPMEmulatorInit to virTPMEmulatorInit in virtpm.c
  • From: Stefan Berger
• [PATCH v5 19/20] docs: Extend Secret XML documentation with vtpm usage type
  • From: Stefan Berger
• [PATCH v5 04/20] schema: Extend the TPM XML schema with support for encryption
  • From: Stefan Berger
• [PATCH v5 11/20] utils: Implement function to pass a buffer to send via a fd to virCommand
  • From: Stefan Berger
• [PATCH v5 18/20] tpm: Check TPM XML device configuration changes after edit
  • From: Stefan Berger
• [PATCH v5 16/20] tpm: Use fd to pass password to swtpm_setup and swtpm
  • From: Stefan Berger
• [PATCH v5 01/20] secret: Add support for usage type vTPM, extend schema and test case
  • From: Stefan Berger
• [PATCH v5 10/20] tpm: Parse the capabilities supported by swtpm and swtpm_setup
  • From: Stefan Berger
• [PATCH v5 08/20] tpm: Refactor virTPMEmulatorInit to use loop
  • From: Stefan Berger
• [PATCH v5 14/20] utils: Extend virCommandProcessIO to include the send buffers
  • From: Stefan Berger
• [PATCH v5 15/20] tests: Extend command test to transfer large data to process on multiple fds
  • From: Stefan Berger
• [PATCH v5 20/20] docs: Extend TPM docs with new encryption element
  • From: Stefan Berger
• [PATCH v5 03/20] conf: Extend TPM XML parser with encryption support
  • From: Stefan Berger
• [PATCH v5 06/20] tests: Add tests for QEMU command line generation with encrypted TPM
  • From: Stefan Berger
• [PATCH v5 05/20] tests: Add test for TPM XML encryption parser and formatter
  • From: Stefan Berger
• [PATCH v5 00/20] Add support for vTPM state encryption
  • From: Stefan Berger
• [PATCH 25/25] qemu: hotplug: Transfer ownership of backing chain to block job on disk unplug
  • From: Peter Krempa
• [PATCH 24/25] qemu: blockjob: Unplug inherited storage chains when concluding blockjob
  • From: Peter Krempa
• [PATCH 23/25] qemu: Detect managed persistent reservations in block job orphan chains
  • From: Peter Krempa
• [PATCH 22/25] qemu: blockjob: Track orphaned backing chains in blockjob status XML
  • From: Peter Krempa
• [PATCH 21/25] conf: export virDomainDiskBackingStoreFormat
  • From: Peter Krempa
• [PATCH 20/25] conf: export virDomainDiskBackingStoreParse
  • From: Peter Krempa
• [PATCH 19/25] qemu: process: Refresh -blockdev based blockjobs on reconnect to qemu
  • From: Peter Krempa
• [PATCH 18/25] qemu: blockjob: Add modern block job event handler
  • From: Peter Krempa
• [PATCH 17/25] qemu: Add handler for job state change event
  • From: Peter Krempa
• [PATCH 16/25] qemu: blockjob: Add helper to convert monitor job status to internal state
  • From: Peter Krempa
• [PATCH 15/25] qemu: process: Don't trigger BLOCK_JOB* events with -blockdev
  • From: Peter Krempa
• [PATCH 14/25] qemu: blockjob: Add 'concluded' state for a block job
  • From: Peter Krempa
• [PATCH 13/25] tests: qemustatusxml2xml: Add test case for block job tracking
  • From: Peter Krempa
• [PATCH 12/25] qemu: driver: Remove unnecessary saving of status XML
  • From: Peter Krempa
• [PATCH 11/25] qemu: blockjob: Save status XML when modifying job state
  • From: Peter Krempa
• [PATCH 10/25] qemu: domain: Store blockjob data in the status XML
  • From: Peter Krempa
• [PATCH 09/25] qemu: blockjob: Add flag for invalid block job data
  • From: Peter Krempa
• [PATCH 08/25] qemu: blockjob: Export functions for allocating and registering job data
  • From: Peter Krempa
• [PATCH 07/25] qemu: blockjob: Add string convertors for blockjob type and state enums
  • From: Peter Krempa
• [PATCH 03/25] qemu: blockjob: Use VIR_AUTOUNREF in qemuBlockJobDataNew
  • From: Peter Krempa
• [PATCH 06/25] qemu: blockjob: Register new and running blockjobs in the global table
  • From: Peter Krempa
• [PATCH 01/25] qemu: domain: Repurpose and export helper for saving domain status XML
  • From: Peter Krempa
• [PATCH 05/25] qemu: domain: Add global table of blockjobs
  • From: Peter Krempa
• [PATCH 04/25] qemu: blockjob: Separate and unify block job (un)registration
  • From: Peter Krempa
• [PATCH 00/25] qemu: Properly track blockjobs (blockdev-add saga)
  • From: Peter Krempa
• [PATCH 02/25] qemu: domain: Add helper for saving config XML
  • From: Peter Krempa
• [PATCH] storage: rbd: do not attempt to dereference a non-pointer
  • From: Ján Tomko
• Re: [libvirt-php PATCH 0/2] Add binding for virDomainInterfaceAddresses
  • From: Michal Privoznik
• Re: [PATCHv2 5/9] qemu: monitor: Add support for 'job-cancel' command
  • From: Ján Tomko
• Re: [PATCH v2 3/3] conf: add 'bochs' video display type
  • From: Ján Tomko
• Re: [PATCH v2 2/3] qemu: minor refactor of video device string handling
  • From: Ján Tomko
• Re: [PATCH v2 1/3] qemu: Add bochs-display capability
  • From: Ján Tomko
• Re: [PATCH 4/4] docs: RBD pool only supports raw volumes
  • From: Daniel P. Berrangé
• Re: [PATCH 3/4] Revert "conf: Remove volOptions for VIR_STORAGE_POOL_RBD"
  • From: Daniel P. Berrangé
• Re: [PATCH 2/4] storage: rbd: actually index the array when iterating over it
  • From: Daniel P. Berrangé
• Re: [PATCH 1/4] storage: rbd: use VIR_REALLOC in the loop
  • From: Daniel P. Berrangé
• [PATCH 4/4] docs: RBD pool only supports raw volumes
  • From: Ján Tomko
• [PATCH 2/4] storage: rbd: actually index the array when iterating over it
  • From: Ján Tomko
• [PATCH 1/4] storage: rbd: use VIR_REALLOC in the loop
  • From: Ján Tomko
• [PATCH 3/4] Revert "conf: Remove volOptions for VIR_STORAGE_POOL_RBD"
  • From: Ján Tomko
• [PATCH 0/4] Blind rbd driver fixes
  • From: Ján Tomko
• Re: [PATCH 26/29] remote: refactor the code for choosing the UNIX socket path
  • From: Daniel P. Berrangé
• Re: [PATCH 0/3] virnetworkobj: Couple of small fixes and improvements
  • From: Erik Skultety
• Re: [PATCH 26/29] remote: refactor the code for choosing the UNIX socket path
  • From: Erik Skultety
• Re: Problem configuring selective dropping of root
  • From: Martin Kletzander
• Re: [PATCH 24/29] remote: open secondary drivers via remote driver if needed
  • From: Daniel P. Berrangé
• Re: [PATCH 24/29] remote: open secondary drivers via remote driver if needed
  • From: Peter Krempa
• Re: [PATCH 24/29] remote: open secondary drivers via remote driver if needed
  • From: Ján Tomko
• Re: [PATCH 10/29] remote: refactor & rename variables for building libvirtd
  • From: Daniel P. Berrangé
• Re: [PATCH 24/29] remote: open secondary drivers via remote driver if needed
  • From: Michal Privoznik
• Re: [PATCH 10/29] remote: refactor & rename variables for building libvirtd
  • From: Michal Privoznik
• Re: [PATCH 09/29] remote: conditionalize IP socket config in augeas definitions
  • From: Michal Privoznik
• Re: [PATCH 00/29] Split the libvirtd daemon into per-driver daemons
  • From: Michal Privoznik
• Re: [PATCH 26/29] remote: refactor the code for choosing the UNIX socket path
  • From: Michal Privoznik
• Re: [PATCH 27/29] remote: switch to connect to per-driver daemons by default
  • From: Michal Privoznik
• Re: [PATCH 0/4] qemu: blockdev-related cleanups and refactors (blockdev-add saga)
  • From: Ján Tomko
• Re: [PATCH 4/4] qemu: block: Split up qemuBlockStorageSourceAttachApply
  • From: Ján Tomko
• Re: [jenkins-ci PATCH] guests: Always install the freshest point release
  • From: Erik Skultety
• Re: [PATCH v4 16/23] utils: Mark inpipe as non-blocking
  • From: Stefan Berger
• Re: [PATCH v4 17/23] utils: Extend virCommandProcessIO to include the send buffers
  • From: Daniel P. Berrangé
• Re: [PATCH v4 14/23] utils: Convert pollfd array to be allocated
  • From: Daniel P. Berrangé
• Re: [PATCH v2 00/19] Enable proper use of systemd socket activation with libvirtd
  • From: Michal Privoznik
• Re: [PATCH v2 11/19] remote: add systemd socket units for UNIX/TCP sockets
  • From: Michal Privoznik
• Re: [PATCH v4 08/23] tpm: Move virtpm.c from utils dir to own tpm dir
  • From: Daniel P. Berrangé
• Re: [PATCH v4 04/23] conf: Extend TPM XML parser with encryption support
  • From: Daniel P. Berrangé
• Re: [PATCH v4 03/23] util: Add VIR_STORAGE_ENCRYPTION_FORMAT_VTPM
  • From: Daniel P. Berrangé
• Re: [PATCH v4 02/23] tests: Add already existing test case tpm-emulator-tpm2
  • From: Daniel P. Berrangé
• Re: [PATCH v4 01/23] secret: Add support for usage type vTPM, extend schema and test case
  • From: Daniel P. Berrangé
• Re: [PATCH v4 16/23] utils: Mark inpipe as non-blocking
  • From: Daniel P. Berrangé
• Re: [PATCH v4 15/23] utils: Write a maximum of MAX_PIPE_WRITE_BYTES into a pipe
  • From: Daniel P. Berrangé
• Re: [PATCH v2] logging: ensure virtlogd rollover takes priority over logrotate
  • From: Daniel P. Berrangé
• [PATCH v2 3/3] test_driver: testDomainSetMaxMemory should simply forward the call
  • From: Ilias Stamatis
• [PATCH v2 2/3] test_driver: testDomainSetMemory should forward the call with VIR_DOMAIN_AFFECT_LIVE
  • From: Ilias Stamatis
• [PATCH v2 1/3] test_driver: consider flags in testDomainSetMemoryFlags
  • From: Ilias Stamatis
• [PATCH v2 0/3] test_driver: re-implement testDomainSetMemoryFlags
  • From: Ilias Stamatis
• Re: [PATCH v2] logging: ensure virtlogd rollover takes priority over logrotate
  • From: Jim Fehlig
• [PATCH v2 3/3] conf: add 'bochs' video display type
  • From: Jonathon Jongsma
• [PATCH v2 2/3] qemu: minor refactor of video device string handling
  • From: Jonathon Jongsma
• [PATCH v2 1/3] qemu: Add bochs-display capability
  • From: Jonathon Jongsma
• [PATCH v2 0/3] Add support for bochs video device
  • From: Jonathon Jongsma
• [PATCH v4 11/23] tpm: Check whether previously found executables were updated
  • From: Stefan Berger
• [PATCH v4 12/23] tpm: Parse the capabilities supported by swtpm and swtpm_setup
  • From: Stefan Berger
• [PATCH v4 06/23] tests: Add test for TPM XML encryption parser and formatter
  • From: Stefan Berger
• [PATCH v4 01/23] secret: Add support for usage type vTPM, extend schema and test case
  • From: Stefan Berger
• [PATCH v4 23/23] docs: Extend TPM docs with new encryption element
  • From: Stefan Berger
• [PATCH v4 22/23] docs: Extend Secret XML documentation with vtpm usage type
  • From: Stefan Berger
• [PATCH v4 05/23] schema: Extend the TPM XML schema with support for encryption
  • From: Stefan Berger
• [PATCH v4 19/23] tpm: Use fd to pass password to swtpm_setup and swtpm
  • From: Stefan Berger
• [PATCH v4 21/23] tpm: Check TPM XML device configuration changes after edit
  • From: Stefan Berger
• [PATCH v4 17/23] utils: Extend virCommandProcessIO to include the send buffers
  • From: Stefan Berger
• [PATCH v4 13/23] utils: Implement function to pass a buffer to send via a fd to virCommand
  • From: Stefan Berger
• [PATCH v4 16/23] utils: Mark inpipe as non-blocking
  • From: Stefan Berger
• [PATCH v4 14/23] utils: Convert pollfd array to be allocated
  • From: Stefan Berger
• [PATCH v4 20/23] tpm: Pass migration key passphrase via fd to swtpm
  • From: Stefan Berger
• [PATCH v4 07/23] tests: Add tests for QEMU command line generation with encrypted TPM
  • From: Stefan Berger
• [PATCH v4 10/23] tpm: Refactor virTPMEmulatorInit to use loop
  • From: Stefan Berger
• [PATCH v4 09/23] tpm: Move qemuTPMEmulatorInit to virTPMEmulatorInit in virtpm.c
  • From: Stefan Berger
• [PATCH v4 03/23] util: Add VIR_STORAGE_ENCRYPTION_FORMAT_VTPM
  • From: Stefan Berger
• [PATCH v4 04/23] conf: Extend TPM XML parser with encryption support
  • From: Stefan Berger
• [PATCH v4 18/23] tests: Extend command test to transfer large data to process on multiple fds
  • From: Stefan Berger
• [PATCH v4 08/23] tpm: Move virtpm.c from utils dir to own tpm dir
  • From: Stefan Berger
• [PATCH v4 15/23] utils: Write a maximum of MAX_PIPE_WRITE_BYTES into a pipe
  • From: Stefan Berger
• [PATCH v4 02/23] tests: Add already existing test case tpm-emulator-tpm2
  • From: Stefan Berger
• [PATCH v4 00/23] Add support for vTPM state encryption
  • From: Stefan Berger
• [PATCH] virsh emulatorpin, vcpupin: omit offline CPUs from affinity map
  • From: Scott Cheloha
• Re: [PATCH v2 16/21] utils: Extend virCommandProcessIO to including the send buffers
  • From: Stefan Berger
• [PATCHv2 5/9] qemu: monitor: Add support for 'job-cancel' command
  • From: Peter Krempa
• Re: [PATCH v1 28/31] qemu_capabilities: Introduce QEMU_CAPS_DRIVE_NVME
  • From: Michal Privoznik
• Re: [PATCH v1 11/31] conf: Format and parse NVMe type disk
  • From: Peter Krempa
• Re: [PATCH v1 28/31] qemu_capabilities: Introduce QEMU_CAPS_DRIVE_NVME
  • From: Peter Krempa
• Re: [PATCH v1 11/31] conf: Format and parse NVMe type disk
  • From: Michal Privoznik
• [PATCH 28/29] all: don't wait for driver lock during startup
  • From: Daniel P. Berrangé
• [PATCH 27/29] remote: switch to connect to per-driver daemons by default
  • From: Daniel P. Berrangé
• [PATCH 20/29] vbox: introduce virtvboxd daemon
  • From: Daniel P. Berrangé
• [PATCH 19/29] lxc: introduce virtlxcd daemon
  • From: Daniel P. Berrangé
• [PATCH 26/29] remote: refactor the code for choosing the UNIX socket path
  • From: Daniel P. Berrangé
• [PATCH 17/29] libxl: introduce virtlibxld daemon
  • From: Daniel P. Berrangé
• [PATCH 25/29] remote: use enum helpers for parsing remote driver transport
  • From: Daniel P. Berrangé
• [PATCH 16/29] nwfilter: introduce virtnwfilterd daemon
  • From: Daniel P. Berrangé
• [PATCH 24/29] remote: open secondary drivers via remote driver if needed
  • From: Daniel P. Berrangé
• [PATCH 14/29] storage: introduce virtstoraged daemon
  • From: Daniel P. Berrangé
• [PATCH 29/29] interface: fix driver name in state directory path
  • From: Daniel P. Berrangé
• [PATCH 22/29] vz: introduce virtvzd daemon
  • From: Daniel P. Berrangé
• [PATCH 23/29] remote: introduce virtproxyd daemon to handle IP connectivity
  • From: Daniel P. Berrangé
• [PATCH 12/29] network: introduce virtnetworkd daemon
  • From: Daniel P. Berrangé
• [PATCH 18/29] qemu: introduce virtqemud daemon
  • From: Daniel P. Berrangé
• [PATCH 08/29] remote: conditionalize IP socket config in libvirtd.conf
  • From: Daniel P. Berrangé
• [PATCH 21/29] bhyve: introduce virtbhyved daemon
  • From: Daniel P. Berrangé
• [PATCH 11/29] secret: introduce virtsecretd daemon
  • From: Daniel P. Berrangé
• [PATCH 07/29] remote: conditionalize IP socket usage in libvirtd daemon
  • From: Daniel P. Berrangé
• [PATCH 13/29] interface: introduce virtinterfaced daemon
  • From: Daniel P. Berrangé
• [PATCH 15/29] nodedev: introduce virtnodedevd daemon
  • From: Daniel P. Berrangé
• [PATCH 10/29] remote: refactor & rename variables for building libvirtd
  • From: Daniel P. Berrangé
• [PATCH 04/29] remote: conditionalize socket names in libvirtd daemon
  • From: Daniel P. Berrangé
• [PATCH 02/29] remote: simplify libvirtd code for deciding if SASL auth is needed
  • From: Daniel P. Berrangé
• [PATCH 09/29] remote: conditionalize IP socket config in augeas definitions
  • From: Daniel P. Berrangé
• [PATCH 06/29] remote: conditionalize driver loading in libvirtd daemon
  • From: Daniel P. Berrangé
• [PATCH 01/29] rpc: add API for checking whether an auth scheme is in use on a server
  • From: Daniel P. Berrangé
• [PATCH 05/29] remote: conditionalize daemon name in libvirtd daemon
  • From: Daniel P. Berrangé
• [PATCH 03/29] logging: pass binary name not logfile name when enabling logging
  • From: Daniel P. Berrangé
• Re: [PATCH v1 11/31] conf: Format and parse NVMe type disk
  • From: Peter Krempa
• [PATCH 00/29] Split the libvirtd daemon into per-driver daemons
  • From: Daniel P. Berrangé
• Re: [jenkins-ci PATCH 3/3] guests: add libprlsdk package to libvirt project
  • From: Andrea Bolognani
• Re: [jenkins-ci PATCH 2/3] guests: define mapping for the libprlsdk package
  • From: Andrea Bolognani
• Re: [jenkins-ci PATCH 1/3] guests: add openvz repository on CentOS 7
  • From: Andrea Bolognani
• [PATCH v1 30/31] qemu: Don't leak storage perms on failure in qemuDomainAttachDiskGeneric
  • From: Michal Privoznik
• [PATCH v1 29/31] qemu: Generate command line of NVMe disks
  • From: Michal Privoznik
• [PATCH v1 31/31] qemu_hotplug: Prepare NVMe disks on hotplug
  • From: Michal Privoznik
• [PATCH v1 25/31] qemu: Allow NVMe disk in CGroups
  • From: Michal Privoznik
• [PATCH v1 22/31] qemu_domain: Separate VFIO code
  • From: Michal Privoznik
• [PATCH v1 28/31] qemu_capabilities: Introduce QEMU_CAPS_DRIVE_NVME
  • From: Michal Privoznik
• [PATCH v1 21/31] domain_conf: Introduce virDomainDefHasNVMeDisk
  • From: Michal Privoznik
• [PATCH v1 27/31] virSecuritySELinuxRestoreImageLabelInt: Don't skip non-local storage
  • From: Michal Privoznik
• [PATCH v1 20/31] virstoragefile: Introduce virStorageSourceChainHasNVMe
  • From: Michal Privoznik
• [PATCH v1 26/31] security_selinux: Simplify virSecuritySELinuxSetImageLabelInternal
  • From: Michal Privoznik
• [PATCH v1 23/31] qemu_domain: Introduce NVMe path getting helpers
  • From: Michal Privoznik
• [PATCH v1 17/31] virhostdevtest: Test virNVMeDevice assignment
  • From: Michal Privoznik
• [PATCH v1 24/31] qemu: Create NVMe disk in domain namespace
  • From: Michal Privoznik
• [PATCH v1 16/31] virpcimock: Introduce NVMe driver and devices
  • From: Michal Privoznik
• [PATCH v1 19/31] qemu: Take NVMe disks into account when calculating memlock limit
  • From: Michal Privoznik
• [PATCH v1 18/31] qemu: prepare NVMe devices too
  • From: Michal Privoznik
• [PATCH v1 15/31] virhostdevtest: s/CHECK_LIST_COUNT/CHECK_PCI_LIST_COUNT/
  • From: Michal Privoznik
• [PATCH v1 12/31] util: Introduce virNVMeDevice module
  • From: Michal Privoznik
• [PATCH v1 13/31] virhostdev: Include virNVMeDevice module
  • From: Michal Privoznik
• [PATCH v1 14/31] virhostdevtest: Don't proceed to test cases if init failed
  • From: Michal Privoznik
• [PATCH v1 09/31] qemuDomainDeviceDefValidateDisk: Reorder some checks
  • From: Michal Privoznik
• [PATCH v1 07/31] virPCIDeviceAddressAsString: Fix const correctness
  • From: Michal Privoznik
• [PATCH v1 08/31] virpci: Introduce virPCIDeviceAddressCopy
  • From: Michal Privoznik
• [PATCH v1 11/31] conf: Format and parse NVMe type disk
  • From: Michal Privoznik
• [PATCH v1 06/31] virPCIDeviceAddressEqual: Fix const correctness
  • From: Michal Privoznik
• [PATCH v1 05/31] virpcimock: Create driver_override file in device dirs
  • From: Michal Privoznik
• [PATCH v1 10/31] schemas: Introduce disk type NVMe
  • From: Michal Privoznik
• [PATCH v1 03/31] virpcimock: Move actions checking one level up
  • From: Michal Privoznik
• [PATCH v1 04/31] Revert "virpcitest: Test virPCIDeviceDetach failure"
  • From: Michal Privoznik
• [PATCH v1 02/31] virHostdevReAttachPCIDevices: Separate out function body
  • From: Michal Privoznik
• [PATCH v1 01/31] virHostdevPreparePCIDevices: Separate out function body
  • From: Michal Privoznik
• [PATCH v1 00/31] Introduce NVMe support
  • From: Michal Privoznik
• [jenkins-ci PATCH] guests: Make Java symlink creation conditional
  • From: Andrea Bolognani
• [PATCH 2/4] qemu: blockjob: Don't emit traditional disk events for jobs without disk
  • From: Peter Krempa
• [PATCH 1/4] qemu: blockjob: Don't reset state when entering sync blockjob
  • From: Peter Krempa
• [PATCH 4/4] qemu: block: Split up qemuBlockStorageSourceAttachApply
  • From: Peter Krempa
• [PATCH 3/4] qemu: Refactor variables for extracting flags in qemuDomainBlockCopyCommon
  • From: Peter Krempa
• [PATCH 0/4] qemu: blockdev-related cleanups and refactors (blockdev-add saga)
  • From: Peter Krempa
• [jenkins-ci PATCH] guests: Create java symlink on FreeBSD
  • From: Andrea Bolognani
• Re: [PATCH] test_driver: consider flags in testDomainSetMemoryFlags
  • From: Eric Blake
• Re: [PATCH 04/10] qemu: stop formatting json='1' in status XML
  • From: Ján Tomko
• Re: [PATCH] test_driver: consider flags in testDomainSetMemoryFlags
  • From: Ilias Stamatis
• [PATCH v2 19/19] rpc: remove unused typedef for auto shutdown function callback
  • From: Daniel P. Berrangé
• [PATCH v2 18/19] util: remove unused helper for getting UNIX socket path
  • From: Daniel P. Berrangé
• [PATCH v2 17/19] util: move code for getting listen FDs into systemd module
  • From: Daniel P. Berrangé
• [PATCH v2 16/19] logging: convert log daemon to use systemd activation APIs
  • From: Daniel P. Berrangé
• [PATCH v2 12/19] remote: make system libvirtd exit when idle via timeout
  • From: Daniel P. Berrangé
• [PATCH v2 15/19] locking: convert lock daemon to use systemd activation APIs
  • From: Daniel P. Berrangé
• [PATCH v2 11/19] remote: add systemd socket units for UNIX/TCP sockets
  • From: Daniel P. Berrangé
• [PATCH v2 14/19] util: remove code spawning with systemd activation env vars
  • From: Daniel P. Berrangé
• [PATCH v2 08/19] remote: simplify libvirtd code for deciding if SASL auth is needed
  • From: Daniel P. Berrangé
• [PATCH v2 09/19] remote: fix handling of systemd activation wrt socket ordering
  • From: Daniel P. Berrangé
• [PATCH v2 13/19] remote: update config files to note usage wrt systemd socket activation
  • From: Daniel P. Berrangé
• [PATCH v2 06/19] rpc: add helper APIs for adding services with systemd activation
  • From: Daniel P. Berrangé
• [PATCH v2 04/19] rpc: allow creating RPC service from an array of FDs
  • From: Daniel P. Berrangé
• [PATCH v2 05/19] rpc: avoid unlinking sockets passed in from systemd
  • From: Daniel P. Berrangé
• [PATCH v2 03/19] rpc: refactor RPC service constructors to share more code
  • From: Daniel P. Berrangé
• [PATCH v2 10/19] rpc: remove unused API for creating services from FDs
  • From: Daniel P. Berrangé
• [PATCH v2 02/19] util: add APIs for facilitating use of systemd activation FDs
  • From: Daniel P. Berrangé
• [PATCH v2 07/19] rpc: add API for checking whether an auth scheme is in use on a server
  • From: Daniel P. Berrangé
• [PATCH v2 01/19] rpc: ensure all sockets bind to same port when service is NULL
  • From: Daniel P. Berrangé
• [PATCH v2 00/19] Enable proper use of systemd socket activation with libvirtd
  • From: Daniel P. Berrangé
• Re: [PATCH] test_driver: consider flags in testDomainSetMemoryFlags
  • From: Eric Blake
• Re: [PATCH 04/23] util: add VIR_AUTOSTRUCT for directly calling a struct free function
  • From: Daniel P. Berrangé
• Re: [PATCH v2 13/21] utils: Implement function to pass a buffer to send via a fd to virCommand
  • From: Stefan Berger
• Re: [PATCH 1/5] lib: add API to query info about logged-in users
  • From: Jonathon Jongsma
• [PATCH] nodedev: add missing include for virFileMakePathWithMode
  • From: Daniel P. Berrangé
• Re: Problem configuring selective dropping of root (SOLVED)
  • From: Stephan von Krawczynski
• Re: [PATCH 1/5] lib: add API to query info about logged-in users
  • From: Peter Krempa
• [PATCH] test_driver: implement virDomainSetMemoryStatsPeriod
  • From: Ilias Stamatis
• Re: Problem configuring selective dropping of root
  • From: Bjoern Walk
• Re: [jenkins-ci PATCH 2/2] guests: Use OpenJDK 11 where possible
  • From: Daniel P. Berrangé
• Re: [jenkins-ci PATCH 1/2] guests: Add mapping for OpenJDK on Ubuntu
  • From: Daniel P. Berrangé
• Re: [PATCH 1/5] lib: add API to query info about logged-in users
  • From: Daniel P. Berrangé
• [PATCH] test_driver: consider flags in testDomainSetMemoryFlags
  • From: Ilias Stamatis
• Re: [PATCH v2 3/3] gitlab: Perform some builds on Debian 10
  • From: Daniel P. Berrangé
• Re: [PATCH v2 13/21] utils: Implement function to pass a buffer to send via a fd to virCommand
  • From: Stefan Berger
• Re: [PATCH v2 2/3] ci: Update image list
  • From: Daniel P. Berrangé
• Re: [PATCH v2 1/3] ci: Use default image tag "latest"
  • From: Daniel P. Berrangé
• Re: [PATCH v2 15/21] utils: Write a maximum of MAX_PIPE_FEED_BYTES into a pipe
  • From: Stefan Berger
• Re: [PATCH 0/3] ci: Various updates
  • From: Andrea Bolognani
• [jenkins-ci PATCH 3/3] guests: add libprlsdk package to libvirt project
  • From: Daniel P. Berrangé
• [jenkins-ci PATCH 2/3] guests: define mapping for the libprlsdk package
  • From: Daniel P. Berrangé
• [jenkins-ci PATCH 1/3] guests: add openvz repository on CentOS 7
  • From: Daniel P. Berrangé
• [jenkins-ci PATCH 0/3] Enable building of the VZ driver on CentOS 7
  • From: Daniel P. Berrangé
• [PATCH v2 1/3] ci: Use default image tag "latest"
  • From: Andrea Bolognani
• [PATCH v2 3/3] gitlab: Perform some builds on Debian 10
  • From: Andrea Bolognani
• [PATCH v2 2/3] ci: Update image list
  • From: Andrea Bolognani
• [PATCH v2 0/3] ci: Various updates
  • From: Andrea Bolognani
• [PATCH 3/3] gitlab: Perform some builds on Debian 10
  • From: Andrea Bolognani
• [PATCH 2/3] ci: Update image list
  • From: Andrea Bolognani
• [PATCH 1/3] ci: Use default image tag "latest"
  • From: Andrea Bolognani
• [PATCH 0/3] ci: Various updates
  • From: Andrea Bolognani
• Re: Problem configuring selective dropping of root
  • From: Stephan von Krawczynski
• Re: Problem configuring selective dropping of root
  • From: Pavel Hrdina
• Re: [PATCH 1/2] domain_conf: move DomainParseBlkioDeviceStr out of QEMU and LXC drivers
  • From: Peter Krempa
• Re: Problem configuring selective dropping of root (SOLVED)
  • From: Stephan von Krawczynski
• Re: [PATCH 1/2] domain_conf: move DomainParseBlkioDeviceStr out of QEMU and LXC drivers
  • From: Pavel Hrdina
• [PATCH v2 2/3] storage: Add missing pool type flags in comment
  • From: Han Han
• [PATCH v2 1/3] storage: Add iscsi-direct pool list type flag
  • From: Han Han
• [PATCH v2 3/3] virsh.pod: Add zfs and vstorage pool types
  • From: Han Han
• [PATCH v2 0/3] Add missing pool list types
  • From: Han Han
• Re: [PATCH 1/2] domain_conf: move DomainParseBlkioDeviceStr out of QEMU and LXC drivers
  • From: Peter Krempa
• [PATCH] storage: Add iscsi-direct pool list type flag
  • From: Han Han
• Re: Problem configuring selective dropping of root (SOLVED)
  • From: Stephan von Krawczynski
• Re: [PATCH 6/8] backup: Add support for filtering based on current moment
  • From: Eric Blake
• [PATCH v3 14/21] utils: Convert pollfd array to be allocated
  • From: Stefan Berger
• [PATCH v3 04/21] conf: Extend TPM XML parser with encryption support
  • From: Stefan Berger
• [PATCH v3 18/21] tpm: Pass migration key passphrase via fd to swtpm
  • From: Stefan Berger
• [PATCH v3 13/21] utils: Implement function to pass a buffer to send via a fd to virCommand
  • From: Stefan Berger
• [PATCH v3 15/21] utils: Write a maximum of MAX_PIPE_FEED_BYTES into a pipe
  • From: Stefan Berger
• [PATCH v3 21/21] docs: Extend TPM docs with new encryption element
  • From: Stefan Berger
• [PATCH v3 11/21] tpm: Check whether previously found executables were updated
  • From: Stefan Berger
• [PATCH v3 08/21] tpm: Move virtpm.c from utils dir to own tpm dir
  • From: Stefan Berger
• [PATCH v3 09/21] tpm: Move qemuTPMEmulatorInit to virTPMEmulatorInit in virtpm.c
  • From: Stefan Berger
• [PATCH v3 10/21] tpm: Refactor virTPMEmulatorInit to use loop
  • From: Stefan Berger
• [PATCH v3 07/21] tests: Add tests for QEMU command line generation with encrypted TPM
  • From: Stefan Berger
• [PATCH v3 06/21] tests: Add test for TPM XML encryption parser and formatter
  • From: Stefan Berger
• [PATCH v3 20/21] docs: Extend Secret XML documentation with vtpm usage type
  • From: Stefan Berger
• [PATCH v3 05/21] schema: Extend the TPM XML schema with support for encryption
  • From: Stefan Berger
• [PATCH v3 00/21] Add support for vTPM state encryption
  • From: Stefan Berger
• [PATCH v3 16/21] utils: Extend virCommandProcessIO to include the send buffers
  • From: Stefan Berger
• [PATCH v3 12/21] tpm: Parse the capabilities supported by swtpm and swtpm_setup
  • From: Stefan Berger
• [PATCH v3 19/21] tpm: Check TPM XML device configuration changes after edit
  • From: Stefan Berger
• [PATCH v3 02/21] tests: Add already existing test case tpm-emulator-tpm2
  • From: Stefan Berger
• [PATCH v3 17/21] tpm: Use fd to pass password to swtpm_setup and swtpm
  • From: Stefan Berger
• [PATCH v3 03/21] util: Add VIR_STORAGE_ENCRYPTION_FORMAT_VTPM
  • From: Stefan Berger
• [PATCH v3 01/21] secret: Add support for usage type vTPM, extend schema and test case
  • From: Stefan Berger
• Re: [PATCH v2 13/21] utils: Implement function to pass a buffer to send via a fd to virCommand
  • From: Marc-André Lureau
• [PATCH 5/5] qemu: implement virDomainGetGuestUsers
  • From: Jonathon Jongsma
• [PATCH 4/5] qemu_agent: add helper for getting guest users
  • From: Jonathon Jongsma
• [PATCH 2/5] remote: implement remote protocol for virDomainGetGuestUsers
  • From: Jonathon Jongsma
• [PATCH 3/5] virsh: add command 'guestusers' implementing VirDomainGetGuestUsers
  • From: Jonathon Jongsma
• [PATCH 1/5] lib: add API to query info about logged-in users
  • From: Jonathon Jongsma
• [PATCH 0/5] Implement qemu-ga 'guest-get-users'
  • From: Jonathon Jongsma
• Re: [PATCH v2 15/21] utils: Write a maximum of MAX_PIPE_FEED_BYTES into a pipe
  • From: Marc-André Lureau
• Re: [PATCH v2 16/21] utils: Extend virCommandProcessIO to including the send buffers
  • From: Marc-André Lureau
• Re: [PATCH v2 14/21] utils: Convert pollfd array to be allocated
  • From: Stefan Berger
• Re: [PATCH v2 14/21] utils: Convert pollfd array to be allocated
  • From: Marc-André Lureau
• [PATCH v2 08/21] tpm: Move virtpm.c from utils dir to own tpm dir
  • From: Stefan Berger
• [PATCH v2 21/21] docs: Extend TPM docs with new encryption element
  • From: Stefan Berger
• [PATCH v2 09/21] tpm: Move qemuTPMEmulatorInit to virTPMEmulatorInit in virtpm.c
  • From: Stefan Berger
• [PATCH v2 03/21] util: Add VIR_STORAGE_ENCRYPTION_FORMAT_VTPM
  • From: Stefan Berger
• [PATCH v2 14/21] utils: Convert pollfd array to be allocated
  • From: Stefan Berger
• [PATCH v2 07/21] tests: Add tests for QEMU command line generation with encrypted TPM
  • From: Stefan Berger
• [PATCH v2 06/21] tests: Add test for TPM XML encryption parser and formatter
  • From: Stefan Berger
• [PATCH v2 16/21] utils: Extend virCommandProcessIO to including the send buffers
  • From: Stefan Berger
• [PATCH v2 19/21] tpm: Check TPM XML device configuration changes after edit
  • From: Stefan Berger
• [PATCH v2 01/21] secret: Add support for usage type vTPM, extend schema and test case
  • From: Stefan Berger
• [PATCH v2 15/21] utils: Write a maximum of MAX_PIPE_FEED_BYTES into a pipe
  • From: Stefan Berger
• [PATCH v2 11/21] tpm: Check whether previously found executables were updated
  • From: Stefan Berger
• [PATCH v2 13/21] utils: Implement function to pass a buffer to send via a fd to virCommand
  • From: Stefan Berger
• [PATCH v2 02/21] tests: Add already existing test case tpm-emulator-tpm2
  • From: Stefan Berger
• [PATCH v2 20/21] docs: Extend Secret XML documentation with vtpm usage type
  • From: Stefan Berger
• [PATCH v2 18/21] tpm: Pass migration key passphrase via fd to swtpm
  • From: Stefan Berger
• [PATCH v2 05/21] schema: Extend the TPM XML schema with support for encryption
  • From: Stefan Berger
• [PATCH v2 17/21] tpm: Use fd to pass password to swtpm_setup and swtpm
  • From: Stefan Berger
• [PATCH v2 04/21] conf: Extend TPM XML parser with encryption support
  • From: Stefan Berger
• [PATCH v2 12/21] tpm: Parse the capabilities supported by swtpm and swtpm_setup
  • From: Stefan Berger
• [PATCH v2 10/21] tpm: Refactor virTPMEmulatorInit to use loop
  • From: Stefan Berger
• [PATCH v2 00/21] Add support for vTPM state encryption
  • From: Stefan Berger
• [PATCH v2] logging: ensure virtlogd rollover takes priority over logrotate
  • From: Daniel P. Berrangé
• Re: [PATCH 05/12] nodedev: acquire a pidfile in the driver root directory
  • From: Daniel P. Berrangé
• Re: [PATCH 4/6] test: Add various vir*Flags API
  • From: Eric Blake
• Re: [PATCH 05/12] nodedev: acquire a pidfile in the driver root directory
  • From: Michal Privoznik
• Re: [PATCH 00/12] introduce locking into every driver
  • From: Michal Privoznik
• [dockerfiles PATCH 3/3] Add Debian 10 Dockerfiles
  • From: Andrea Bolognani
• [dockerfiles PATCH 0/3] Various updates
  • From: Andrea Bolognani
• [dockerfiles PATCH 1/3] Refresh after recent changes
  • From: Andrea Bolognani
• [dockerfiles PATCH 2/3] Re-introduce Ubuntu 16.04 Dockerfile
  • From: Andrea Bolognani
• Re: [PATCH 06/23] util: add APIs for facilitating use of systemd activation FDs
  • From: Ján Tomko
• [PATCH 10/12] lxc: acquire a pidfile in the driver root directory
  • From: Daniel P. Berrangé
• [PATCH 11/12] vz: acquire a pidfile in the driver root directory
  • From: Daniel P. Berrangé
• [PATCH 12/12] bhyve: acquire a pidfile in the driver root directory
  • From: Daniel P. Berrangé
• [PATCH 09/12] libxl: acquire a pidfile in the driver root directory
  • From: Daniel P. Berrangé
• [PATCH 08/12] libxl: remove obsolete check for xend during driver startup
  • From: Daniel P. Berrangé
• [PATCH 07/12] nwfilter: acquire a pidfile in the driver root directory
  • From: Daniel P. Berrangé
• [PATCH 05/12] nodedev: acquire a pidfile in the driver root directory
  • From: Daniel P. Berrangé
• [PATCH 03/12] network: acquire a pidfile in the driver root directory
  • From: Daniel P. Berrangé
• [PATCH 06/12] interface: acquire a pidfile in the driver root directory
  • From: Daniel P. Berrangé
• [PATCH 04/12] storage: acquire a pidfile in the driver root directory
  • From: Daniel P. Berrangé
• [PATCH 02/12] secrets: acquire a pidfile in the driver root directory
  • From: Daniel P. Berrangé
• [PATCH 01/12] qemu: acquire a pidfile in the driver root directory
  • From: Daniel P. Berrangé
• [PATCH 00/12] introduce locking into every driver
  • From: Daniel P. Berrangé
• [PATCH 2/2] domain_conf: move DomainMergeBlkioDevice out of QEMU and LXC drivers
  • From: Ilias Stamatis
• [PATCH 1/2] domain_conf: move DomainParseBlkioDeviceStr out of QEMU and LXC drivers
  • From: Ilias Stamatis
• [PATCH 0/2] qemu and lxc: remove duplicate code and move some definitions to domain_conf
  • From: Ilias Stamatis
• Re: [PATCH 05/23] util: add API for resolving socket service names
  • From: Ján Tomko
• Re: [PATCH 04/23] util: add VIR_AUTOSTRUCT for directly calling a struct free function
  • From: Ján Tomko
• Re: [PATCH 03/23] rpc: add helper API for getting UNIX path from socket object
  • From: Ján Tomko
• Re: [PATCH 02/23] util: add helper API for getting UNIX path from socket address
  • From: Ján Tomko
• Re: [PATCH 01/23] locking, logging: put a strong dep from admin socket to main socket
  • From: Ján Tomko
• [PATCH] vz: fix typo that lost the '#' in '#define'
  • From: Daniel P. Berrangé
• Re: [PATCH] virfile: adds quobyte as a shared fs
  • From: Silvan Kaiser
• Re: [RFC] New domain job control and stat APIs
  • From: Peter Krempa
• Re: Problem configuring selective dropping of root
  • From: Martin Kletzander
• Re: Problem configuring selective dropping of root
  • From: Stephan von Krawczynski
• Re: [PATCH] rpc: always pass "-T -e none" args to ssh
  • From: Andrea Bolognani
• Re: [RFC] New domain job control and stat APIs
  • From: Eric Blake
• Re: Problem configuring selective dropping of root
  • From: Martin Kletzander
• [RFC] New domain job control and stat APIs
  • From: Peter Krempa
• Re: [PATCH v2 1/9] vbox: Add various vir*Flags API
  • From: Eric Blake
• Re: [jenkins-ci PATCH] guests: Always install the freshest point release
  • From: Andrea Bolognani
• Re: [PATCH v2 1/9] vbox: Add various vir*Flags API
  • From: Eric Blake
• Re: [PATCH 10/18] tpm: Move qemuTPMEmulatorInit to virTPMEmulatorInit in virtpm.c
  • From: Stefan Berger
• Re: [PATCH 13/18] tpm: Parse the capabilities supported by swtpm and swtpm_setup
  • From: Stefan Berger
• Re: [PATCH 14/18] tpm: Use fd to pass password to swtpm_setup and swtpm
  • From: Stefan Berger
• Re: Problem configuring selective dropping of root
  • From: Stephan von Krawczynski
• Re: Problem configuring selective dropping of root
  • From: Pavel Hrdina
• Re: [jenkins-ci PATCH] guests: Always install the freshest point release
  • From: Andrea Bolognani
• Re: [PATCH v2 9/9] xenapi: Ignore no-op flag during virDomainUndefine
  • From: Peter Krempa
• Re: [PATCH v2 8/9] vmware: Ignore no-op flag during virDomainUndefine
  • From: Peter Krempa
• Re: [PATCH v2 7/9] openvz: Ignore no-op flag during virDomainUndefine
  • From: Peter Krempa
• Re: [PATCH v2 6/9] lxc: Ignore no-op flag during virDomainUndefine
  • From: Peter Krempa
• Re: [PATCH v2 5/9] libxl: Ignore no-op flag during virDomainUndefine
  • From: Peter Krempa
• Re: [PATCH v2 4/9] bhyve: Ignore no-op flag during virDomainUndefine
  • From: Peter Krempa
• Re: [PATCH v2 3/9] maint: Enhance check-driverimpls.pl to check for API pairing
  • From: Peter Krempa
• Re: [PATCH v2 1/9] vbox: Add various vir*Flags API
  • From: Peter Krempa
• Re: [PATCH v2 2/9] xenapi: Add various vir*Flags API
  • From: Peter Krempa
• Re: [PATCH v2 2/9] xenapi: Add various vir*Flags API
  • From: Peter Krempa
• Re: [PATCH v2 1/9] vbox: Add various vir*Flags API
  • From: Peter Krempa
• Re: [PATCH v2] libvirt: support block device storage typein virshParseSnapshotDiskspec
  • From: liu.dayu
• Re: Problem configuring selective dropping of root
  • From: Stephan von Krawczynski
• Re: [PATCH 18/18] docs: Extend TPM docs with new encryption element
  • From: Marc-André Lureau
• Re: [PATCH 17/18] docs: Extend Secret XML documentation with vtpm usage type
  • From: Marc-André Lureau
• Re: [PATCH 14/18] tpm: Use fd to pass password to swtpm_setup and swtpm
  • From: Marc-André Lureau
• Re: [PATCH 13/18] tpm: Parse the capabilities supported by swtpm and swtpm_setup
  • From: Marc-André Lureau
• Re: [PATCH 12/18] tpm: Check whether previously found executables were updated
  • From: Marc-André Lureau
• Re: [PATCH 10/18] tpm: Move qemuTPMEmulatorInit to virTPMEmulatorInit in virtpm.c
  • From: Marc-André Lureau
• Re: [PATCH 11/18] tpm: Refactor virTPMEmulatorInit to use loop
  • From: Marc-André Lureau
• Re: [PATCH 09/18] tpm: Move virtpm.c from utils dir to own tpm dir
  • From: Marc-André Lureau
• Re: [PATCH 08/18] tests: Add tests for QEMU command line generation with encrypted TPM
  • From: Marc-André Lureau
• Re: [PATCH 07/18] tests: Add test for TPM XML encryption parser and formatter
  • From: Marc-André Lureau
• Re: [PATCH 06/18] schema: Extend the TPM XML schema with support for encryption
  • From: Marc-André Lureau
• Re: [PATCH 05/18] conf: Extend TPM XML parser with encryption support
  • From: Marc-André Lureau
• Re: [PATCH 02/18] tests: Add test for new Secret vTPM usage type
  • From: Marc-André Lureau
• Re: [PATCH 04/18] util: Add VIR_STORAGE_ENCRYPTION_FORMAT_VTPM
  • From: Marc-André Lureau
• Re: [PATCH 03/18] tests: Add already existing test case tpm-emulator-tpm2
  • From: Marc-André Lureau
• Re: [PATCH 01/18] secret: Add support for usage type vTPM
  • From: Marc-André Lureau
• [PATCH 4/4] test_driver: implement virDomainFSTrim
  • From: Ilias Stamatis
• [PATCH 3/4] test_driver: implement virDomainFSThaw
  • From: Ilias Stamatis
• [PATCH 2/4] test_driver: implement virDomainFSFreeze
  • From: Ilias Stamatis
• [PATCH 1/4] test_driver: introduce domain-private data
  • From: Ilias Stamatis
• [PATCH 0/4] test_driver: implement FS-related APIs
  • From: Ilias Stamatis
• [PATCH 08/18] tests: Add tests for QEMU command line generation with encrypted TPM
  • From: Stefan Berger
• Re: [PATCH] logging: ensure virtlogd rollover takes priority over logrotate
  • From: Jim Fehlig
• [PATCH 15/18] tpm: Pass migration key passphrase via fd to swtpm
  • From: Stefan Berger
• [PATCH 09/18] tpm: Move virtpm.c from utils dir to own tpm dir
  • From: Stefan Berger
• [PATCH 17/18] docs: Extend Secret XML documentation with vtpm usage type
  • From: Stefan Berger
• [PATCH 12/18] tpm: Check whether previously found executables were updated
  • From: Stefan Berger
• [PATCH 02/18] tests: Add test for new Secret vTPM usage type
  • From: Stefan Berger
• [PATCH 03/18] tests: Add already existing test case tpm-emulator-tpm2
  • From: Stefan Berger
• [PATCH 13/18] tpm: Parse the capabilities supported by swtpm and swtpm_setup
  • From: Stefan Berger