On 1/21/21 6:12 PM, deloptes wrote:
deloptes wrote:
I am not sure if I understand correctly your setup.
Headphones are not to be used with HSP/HFP if they do not have a mic (if
they are not a headset). In the case it is only headphones you should use
A2DP with Sync (bluetooth)
The Mic of your webcam would be then a Source.
You need pulseaudio-module-bluetooth installed (check).
You need pulseaudio set correctly
Check
pacmd list-sink-inputs
pacmd list-source-outputs
might be you have to set input/output manually
All of the Bluetooth headphones I have, include microphones. Only two
models (Inland 87099 and Creative) have the electronics to support the
HSP/HFP profile.
My intent was to use the headphone mic in one of these for online
meetings (Zoom, Jitsi, etc.), but under Debian, this isn't working with
the installed software. pulseaudio-module-bluetooth is installed, as is
ofono, blueman, bluez-tools, bluez, bluez-obexd and libbluetooth3.
This exact same setup worked when I had TDE/PCLinuxOS installed with the
same packages as above (the libbluetooth package might have been named
differently).
Under PCLOS, I used the PC's on-board audio at the time. I do not know
if the new PCI-E sound card I have now, has anything to do with this
issue, even though the card's /Front Microphone (unplugged)/ entry shows
activity in the PA volume control, until I mute it.
With either the Inland or Creative headphones connected on the HSP/HFP
profile: no mic, no audio in the headphones, no audio from the PC
speakers. Changing profile to A2DP resumes the audio from the
headphones, the headphone mics never worked under A2DP.
pacmd list-sink-inputs lists one input, the headphones.
list-source-outputs indicated 0 (zero) source outputs available.
--
Linux. A Continual Learning Experience.
____________________________________________________
tde-users mailing list -- users@xxxxxxxxxxxxxxxxxx
To unsubscribe send an email to users-leave@xxxxxxxxxxxxxxxxxx
Web mail archive available at https://mail.trinitydesktop.org/mailman3/hyperkitty/list/users@xxxxxxxxxxxxxxxxxx
