Edward wrote:
> Having the PA volume control open, if I speak into the webcam mic
> regardless of the profile for the headphones, it registers that in the
> volume control, so I know the webcam mic is working. .
>
> The volume control is not registering the mic in the headphones, however
> on the Input Devices tab, the sound card (Creative Sound Blaster Audigy
> Fx) is listed with 'Front Microphone (unplugged)', yet it is showing
> microphone activity. I have nothing but speakers plugged into it. Could
> the sound card be causing it or be defective, or perhaps PulseAudio
> isn't detecting it correctly? I have muted that particular entry.
>
> Also, with the headphones using HSP/HFP, the webcam mic doesn't work on
> the test sites. But after switching the profile to A2DP Sink, the mic
> then works on the test sites. This may have to be a workaround.
I am not sure if I understand correctly your setup.
Headphones are not to be used with HSP/HFP if they do not have a mic (if
they are not a headset). In the case it is only headphones you should use
A2DP with Sync (bluetooth)
The Mic of your webcam would be then a Source.
You need pulseaudio-module-bluetooth installed (check).
You need pulseaudio set correctly
Check
pacmd list-sink-inputs
pacmd list-source-outputs
might be you have to set input/output manually
____________________________________________________
tde-users mailing list -- users@xxxxxxxxxxxxxxxxxx
To unsubscribe send an email to users-leave@xxxxxxxxxxxxxxxxxx
Web mail archive available at https://mail.trinitydesktop.org/mailman3/hyperkitty/list/users@xxxxxxxxxxxxxxxxxx
