On Sun, 27 Dec 2020 09:32:02 -0800 William Morder via tde-users <users@xxxxxxxxxxxxxxxxxx> wrote: > I restarted kmix and alsamixer, and my settings were preserved; but after a > reboot, the same problems arise again. Input source resets for rear mic > instead of line-in, and the sound level is changed to 100% instead of 0%. If you have pulseaudio installed, it is quite likely to be causing the problem (especially if it wasn't installed previously). If that's it, either kick the thing to the curb or install pavucontrol or similar and try to configure it that way. (Do *not* on *any* account install pavucontrol if pulse is not already there—it will probably drag pulse in and make things worse.) If you went from SysV init/OpenRC to systemd on your last upgrade, that would have changed the way ALSA settings are saved and may be the culprit. Regardless, this is quite likely an ALSA problem and nothing to do with TDE. Possibly of interest for the large selection of diagnostic commands given: https://unix.stackexchange.com/questions/349613/alsamixer-pulseaudio-choose-internal-mic-over-mic-jack E. Liddell ____________________________________________________ tde-users mailing list -- users@xxxxxxxxxxxxxxxxxx To unsubscribe send an email to users-leave@xxxxxxxxxxxxxxxxxx Web mail archive available at https://mail.trinitydesktop.org/mailman3/hyperkitty/list/users@xxxxxxxxxxxxxxxxxx
