Hi, Jean Delvare wrote: >>>>1* Clean up sensors code so that it doesn't reference fan_min. For >>>>one thing, it'll let us get rid of the errors you had when running >>>>"sensors". (...) >> >>I'll do this, as mentioned above. > > Done and commited to CVS. Please checkout and test. Output with 2.4 > driver should be unchanged, and output with 2.6 driver should now be > fine now. Yes, thank you very much for fixing it. Attached, you'll find some minor changes, because it's bit 2 that signals a fan fault, and the fan labels where assigned in the wrong order. Bye. -- Dipl.-Inform. (FH) Reinhard Nissl mailto:rnissl at gmx.de -------------- next part -------------- An embedded and charset-unspecified text was scrubbed... Name: sensors.conf.eg.diff Url: http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20040205/434f5c72/attachment.pl -------------- next part -------------- An embedded and charset-unspecified text was scrubbed... Name: chips.c.diff Url: http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20040205/434f5c72/attachment-0001.pl
