Hi, Jean Delvare wrote: >>Is there a guide, how to port the sensors program? >> >>Without changes, sensors just gives me the following: >> >>fscher-i2c-0-73 >>Adapter: SMBus I801 adapter at 2000 >>+12V: +11.86 V >>+5V: +5.05 V >>Battery: +3.05 V The above is for kernel 2.6.1 and below for kernel 2.4.22: fscher-i2c-0-73 Adapter: SMBus I801 adapter at 2000 Temp1/CPU: +50.00 C Temp2/MB: +41.00 C Temp3/AUX: +32.00 C Fan1/CPU: 960 RPM Fan2/AUX: 960 RPM Fan3/PS: 1680 RPM +12V: +118.58 V +5V: +50.47 V Battery: +30.54 V The problem is, that the voltage values still need to get devided by 10. Shall I scale the values by 1000 for kernel 2.6.1 and by 100 for kernel 2.4.22 and remove the factor 1000 from sensors.conf? Bye. -- Dipl.-Inform. (FH) Reinhard Nissl mailto:rnissl at gmx.de
