Hi, Jean Delvare wrote: >>The problem is, that the voltage values still need to get devided by >>10. >> >>Shall I scale the values by 1000 for kernel 2.6.1 and by 100 for >>kernel 2.4.22 and remove the factor 1000 from sensors.conf? > > Yes, that's the idea. Well, looking at the conversion formula again, this idea is not 100 % perfect, because it doesn't care to scale the offset value. Currently, the offset is 0 but there is no guarantee, that it will always be 0. What do you think about some further RW files in_refvoltage = 0x21 in_offset0 = 0x00 in_offset1 = 0x00 in_offset2 = 0x00 in_multiplier0 = 0x31 in_multiplier1 = 0x14 in_multiplier2 = 0x0a that initally have the values of the first driver release, which were taken from dmidecode. The driver would then use those values and supply scaled values for in0, in1 and in2. BTW: was the multiplier for temperatures changed from 100 to 1000 around 2.6.0-test5, because gkrellm-2.1.25 uses 100 instead of 1000? Bye. -- Dipl.-Inform. (FH) Reinhard Nissl mailto:rnissl at gmx.de
