Linux Watchdog

• Thread Index

• Re: [PATCH v12 5/8] platform: cznic: turris-omnia-mcu: Add support for MCU watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v12 5/8] platform: cznic: turris-omnia-mcu: Add support for MCU watchdog
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH v12 2/8] platform: cznic: Add preliminary support for Turris Omnia MCU
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH v12 0/8] Turris Omnia MCU driver
  • From: Marek Behún <kabel@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: drop stale Anson Huang from maintainers
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v10 00/38] ep93xx device tree conversion
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2] dt-bindings: drop stale Anson Huang from maintainers
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH v10 24/38] wdt: ts72xx: add DT support for ts72xx
  • From: Nikita Shubin via B4 Relay <devnull+nikita.shubin.maquefel.me@xxxxxxxxxx>
• [PATCH v10 11/38] watchdog: ep93xx: add DT support for Cirrus EP93xx
  • From: Nikita Shubin via B4 Relay <devnull+nikita.shubin.maquefel.me@xxxxxxxxxx>
• [PATCH v10 10/38] dt-bindings: watchdog: Add Cirrus EP93x
  • From: Nikita Shubin via B4 Relay <devnull+nikita.shubin.maquefel.me@xxxxxxxxxx>
• [PATCH v10 00/38] ep93xx device tree conversion
  • From: Nikita Shubin via B4 Relay <devnull+nikita.shubin.maquefel.me@xxxxxxxxxx>
• [PATCH v2] dt-bindings: drop stale Anson Huang from maintainers
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: drop stale Anson Huang from maintainers
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: drop stale Anson Huang from maintainers
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• Re: [PATCH] watchdog: imx2_wdg: Save the actual timeout value
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: imx2_wdg: Save the actual timeout value
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: imx2_wdg: Save the actual timeout value
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: imx2_wdg: Save the actual timeout value
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: imx2_wdg: Save the actual timeout value
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: imx2_wdg: Save the actual timeout value
  • From: LongQiang <lqking7735@xxxxxxx>
• Re: [PATCH] dt-bindings: drop stale Anson Huang from maintainers
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: drop stale Anson Huang from maintainers
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v4 5/6] watchdog: ROHM BD96801 PMIC WDG driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: drop stale Anson Huang from maintainers
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH] dt-bindings: drop stale Anson Huang from maintainers
  • From: Peng Fan <peng.fan@xxxxxxx>
• Re: [PATCH] dt-bindings: drop stale Anson Huang from maintainers
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH] dt-bindings: drop stale Anson Huang from maintainers
  • From: Uwe Kleine-König <ukleinek@xxxxxxxxxx>
• [PATCH] dt-bindings: drop stale Anson Huang from maintainers
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v4 6/6] MAINTAINERS: Add ROHM BD96801 'scalable PMIC' entries
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v4 5/6] watchdog: ROHM BD96801 PMIC WDG driver
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v4 4/6] regulator: bd96801: ROHM BD96801 PMIC regulators
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v4 3/6] mfd: support ROHM BD96801 PMIC core
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v4 2/6] dt-bindings: mfd: bd96801 PMIC core
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v4 1/6] dt-bindings: ROHM BD96801 PMIC regulators
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v4 0/6] Support ROHM BD96801 Scalable PMIC
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v3 09/10] mfd: bd96801: Add ERRB IRQ
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 09/10] mfd: bd96801: Add ERRB IRQ
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v3 09/10] mfd: bd96801: Add ERRB IRQ
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 09/10] mfd: bd96801: Add ERRB IRQ
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v3 03/10] mfd: support ROHM BD96801 PMIC core
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH] watchdog: Make watchdog_class const
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: Make watchdog_class const
  • From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: kempld: use pretimeout member of watchdog_device struct
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: kempld: use pretimeout member of watchdog_device struct
  • From: Thomas Richard <thomas.richard@xxxxxxxxxxx>
• Re: [PATCH v3 09/10] mfd: bd96801: Add ERRB IRQ
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 03/10] mfd: support ROHM BD96801 PMIC core
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: watchdog: img,pdc-wdt: Convert to dtschema
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH] watchdog: add missing MODULE_DESCRIPTION() macros
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: add missing MODULE_DESCRIPTION() macros
  • From: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
• Re: [PATCH v3 07/10] irqdomain: Allow giving name suffix for domain
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v3 07/10] irqdomain: Allow giving name suffix for domain
  • From: Herve Codina <herve.codina@xxxxxxxxxxx>
• Re: [PATCH v3 07/10] irqdomain: Allow giving name suffix for domain
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v3 07/10] irqdomain: Allow giving name suffix for domain
  • From: Herve Codina <herve.codina@xxxxxxxxxxx>
• Re: [PATCH v3 07/10] irqdomain: Allow giving name suffix for domain
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v3 07/10] irqdomain: Allow giving name suffix for domain
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [PATCH v11 0/8] Turris Omnia MCU driver
  • From: Marek Behún <kabel@xxxxxxxxxx>
• Re: [PATCH v11 0/8] Turris Omnia MCU driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v11 5/8] platform: cznic: turris-omnia-mcu: Add support for MCU watchdog
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v11 2/8] platform: cznic: Add preliminary support for Turris Omnia MCU
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v11 5/8] platform: cznic: turris-omnia-mcu: Add support for MCU watchdog
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH v11 2/8] platform: cznic: Add preliminary support for Turris Omnia MCU
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH v11 0/8] Turris Omnia MCU driver
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH v3 10/10] regulator: bd96801: Add ERRB IRQ
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v3 09/10] mfd: bd96801: Add ERRB IRQ
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v3 08/10] regmap: Allow setting IRQ domain name suffix
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v3 07/10] irqdomain: Allow giving name suffix for domain
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v3 06/10] MAINTAINERS: Add ROHM BD96801 'scalable PMIC' entries
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v3 05/10] watchdog: ROHM BD96801 PMIC WDG driver
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v3 04/10] regulator: bd96801: ROHM BD96801 PMIC regulators
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v3 03/10] mfd: support ROHM BD96801 PMIC core
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v3 02/10] dt-bindings: mfd: bd96801 PMIC core
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v3 01/10] dt-bindings: ROHM BD96801 PMIC regulators
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v3 00/10] Support ROHM BD96801 Scalable PMIC
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v9 9/9] dt-bindings: watchdog: renesas,wdt: Document RZ/G3S support
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v9 8/9] watchdog: rzg2l_wdt: Add suspend/resume support
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v9 7/9] watchdog: rzg2l_wdt: Rely on the reset driver for doing proper reset
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v9 6/9] watchdog: rzg2l_wdt: Remove comparison with zero
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v9 5/9] watchdog: rzg2l_wdt: Remove reset de-assert from probe
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v9 4/9] watchdog: rzg2l_wdt: Check return status of pm_runtime_put()
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v9 3/9] watchdog: rzg2l_wdt: Use pm_runtime_resume_and_get()
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v9 2/9] watchdog: rzg2l_wdt: Make the driver depend on PM
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v9 1/9] watchdog: rzg2l_wdt: Restrict the driver to ARCH_RZG2L and ARCH_R9A09G011
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v9 0/9] watchdog: rzg2l_wdt: Add support for RZ/G3S
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• Re: [PATCH v2] dt-bindings: watchdog: img,pdc-wdt: Convert to dtschema
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: lenovo_se10_wdt: add HAS_IOPORT dependency
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: lenovo_se10_wdt: add HAS_IOPORT dependency
  • From: "Mark Pearson" <mpearson-lenovo@xxxxxxxxx>
• [PATCH] watchdog: lenovo_se10_wdt: add HAS_IOPORT dependency
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: watchdog: img,pdc-wdt: Convert to dtschema
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2] dt-bindings: watchdog: img,pdc-wdt: Convert to dtschema
  • From: Shresth Prasad <shresthprasad7@xxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: img,pdc-wdt: Convert to dtschema
  • From: Shresth Prasad <shresthprasad7@xxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: img,pdc-wdt: Convert to dtschema
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH] dt-bindings: watchdog: img,pdc-wdt: Convert to dtschema
  • From: Shresth Prasad <shresthprasad7@xxxxxxxxx>
• [PATCH v2 06/10] MAINTAINERS: Add ROHM BD96801 'scalable PMIC' entries
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v2 05/10] watchdog: ROHM BD96801 PMIC WDG driver
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v2 00/10] Support ROHM BD96801 Scalable PMIC
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [GIT PULL REQUEST] watchdog - v6.10 release cycle.
  • From: pr-tracker-bot@xxxxxxxxxx
• [GIT PULL REQUEST] watchdog - v6.10 release cycle.
  • From: Wim Van Sebroeck <wim@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH RESEND v8 09/10] watchdog: rzg2l_wdt: Power on the PM domain in rzg2l_wdt_restart()
  • From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
• Re: [PATCH v10 2/9] platform: cznic: Add preliminary support for Turris Omnia MCU
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v10 2/9] platform: cznic: Add preliminary support for Turris Omnia MCU
  • From: Marek Behún <kabel@xxxxxxxxxx>
• Re: [PATCH v10 2/9] platform: cznic: Add preliminary support for Turris Omnia MCU
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v10 2/9] platform: cznic: Add preliminary support for Turris Omnia MCU
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH v10 5/9] platform: cznic: turris-omnia-mcu: Add support for MCU watchdog
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH v10 0/9] Turris Omnia MCU driver
  • From: Marek Behún <kabel@xxxxxxxxxx>
• Re: [RFC PATCH 0/6] Support ROHM BD96801 scalable PMIC
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC PATCH 0/6] Support ROHM BD96801 scalable PMIC
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [RFC PATCH 0/6] Support ROHM BD96801 scalable PMIC
  • From: Mark Brown <broonie@xxxxxxxxxx>
• RE: [PATCH v3] watchdog: rti_wdt: Set min_hw_heartbeat_ms to accommodate a safety margin
  • From: "Saulnier, Nick" <nsaulnier@xxxxxx>
• Re: [PATCH v3] watchdog: rti_wdt: Set min_hw_heartbeat_ms to accommodate a safety margin
  • From: Judith Mendez <jm@xxxxxx>
• Re: [PATCH v9 0/9] Turris Omnia MCU driver
  • From: Marek Behún <kabel@xxxxxxxxxx>
• RE: [PATCH] watchdog: xilinx_wwdt: Add check for timeout limit and set maximum value if exceeded
  • From: "T, Harini" <Harini.T@xxxxxxx>
• Re: [PATCH v9 5/9] platform: cznic: turris-omnia-mcu: Add support for MCU watchdog
  • From: Andy Shevchenko <andy@xxxxxxxxxx>
• Re: [PATCH v9 0/9] Turris Omnia MCU driver
  • From: Andy Shevchenko <andy@xxxxxxxxxx>
• Re: [PATCH v9 2/9] platform: cznic: Add preliminary support for Turris Omnia MCU
  • From: Marek Behún <kabel@xxxxxxxxxx>
• Re: [PATCH v9 2/9] platform: cznic: Add preliminary support for Turris Omnia MCU
  • From: Andy Shevchenko <andy@xxxxxxxxxx>
• [PATCH v9 5/9] platform: cznic: turris-omnia-mcu: Add support for MCU watchdog
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH v9 2/9] platform: cznic: Add preliminary support for Turris Omnia MCU
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH v9 0/9] Turris Omnia MCU driver
  • From: Marek Behún <kabel@xxxxxxxxxx>
• Re: [PATCH] watchdog: LENOVO_SE10_WDT should depend on X86 && DMI
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: LENOVO_SE10_WDT should depend on X86 && DMI
  • From: "Mark Pearson" <mpearson-lenovo@xxxxxxxxx>
• [PATCH] watchdog: LENOVO_SE10_WDT should depend on X86 && DMI
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH v1 3/6] mfd: support ROHM BD96801 PMIC core
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v1 3/6] mfd: support ROHM BD96801 PMIC core
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v1 1/6] dt-bindings: ROHM BD96801 PMIC regulators
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v8 2/9] platform: cznic: Add preliminary support for Turris Omnia MCU
  • From: Marek Behún <kabel@xxxxxxxxxx>
• Re: [PATCH v1 1/6] dt-bindings: ROHM BD96801 PMIC regulators
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v8 2/9] platform: cznic: Add preliminary support for Turris Omnia MCU
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v8 2/9] platform: cznic: Add preliminary support for Turris Omnia MCU
  • From: Marek Behún <kabel@xxxxxxxxxx>
• Re: [PATCH v8 2/9] platform: cznic: Add preliminary support for Turris Omnia MCU
  • From: Marek Behún <kabel@xxxxxxxxxx>
• Re: [PATCH v8 2/9] platform: cznic: Add preliminary support for Turris Omnia MCU
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v8 2/9] platform: cznic: Add preliminary support for Turris Omnia MCU
  • From: Marek Behún <kabel@xxxxxxxxxx>
• Re: [PATCH v1 1/6] dt-bindings: ROHM BD96801 PMIC regulators
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v1 5/6] watchdog: ROHM BD96801 PMIC WDG driver
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v9 1/1] watchdog: aspeed: Revise handling of bootstatus
  • From: Andrew Jeffery <andrew@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 5/6] watchdog: ROHM BD96801 PMIC WDG driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v8 2/9] platform: cznic: Add preliminary support for Turris Omnia MCU
  • From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
• Re: [PATCH v8 2/9] platform: cznic: Add preliminary support for Turris Omnia MCU
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v8 2/9] platform: cznic: Add preliminary support for Turris Omnia MCU
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH v9 1/1] watchdog: aspeed: Revise handling of bootstatus
  • From: Peter Yin <peteryin.openbmc@xxxxxxxxx>
• [PATCH v9 0/1] watchdog: aspeed: Revise handling of bootstatus
  • From: Peter Yin <peteryin.openbmc@xxxxxxxxx>
• Re: [PATCH v8 1/1] drivers: watchdog: revise watchdog bootstatus
  • From: Peter Yin <peteryin.openbmc@xxxxxxxxx>
• Re: [PATCH v8 2/9] platform: cznic: Add preliminary support for Turris Omnia MCU
  • From: Marek Behún <kabel@xxxxxxxxxx>
• Re: [PATCH v8 2/9] platform: cznic: Add preliminary support for Turris Omnia MCU
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 6/6] MAINTAINERS: Add ROHM BD96801 'scalable PMIC' entries
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v1 5/6] watchdog: ROHM BD96801 PMIC WDG driver
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v1 4/6] regulator: bd96801: ROHM BD96801 PMIC regulators
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v1 3/6] mfd: support ROHM BD96801 PMIC core
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v1 2/6] dt-bindings: mfd: bd96801 PMIC core
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v1 1/6] dt-bindings: ROHM BD96801 PMIC regulators
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v1 0/6] Support ROHM BD96801 scalable PMIC
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v7 0/9] Turris Omnia MCU driver
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH v8 5/9] platform: cznic: turris-omnia-mcu: Add support for MCU watchdog
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH v8 2/9] platform: cznic: Add preliminary support for Turris Omnia MCU
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH v8 0/9] Turris Omnia MCU driver
  • From: Marek Behún <kabel@xxxxxxxxxx>
• Re: [PATCH v8 1/1] drivers: watchdog: revise watchdog bootstatus
  • From: Andrew Jeffery <andrew@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v8 1/1] drivers: watchdog: revise watchdog bootstatus
  • From: Peter Yin <peteryin.openbmc@xxxxxxxxx>
• Re: [PATCH RESEND v8 09/10] watchdog: rzg2l_wdt: Power on the PM domain in rzg2l_wdt_restart()
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v8 1/1] drivers: watchdog: revise watchdog bootstatus
  • From: Andrew Jeffery <andrew@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v8 1/1] drivers: watchdog: revise watchdog bootstatus
  • From: Peter Yin <peteryin.openbmc@xxxxxxxxx>
• [PATCH v8 0/1] drivers: watchdog: revise watchdog bootstatus
  • From: Peter Yin <peteryin.openbmc@xxxxxxxxx>
• Re: [PATCH v7 1/1] drivers: watchdog: revise watchdog bootstatus
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v7 0/9] Turris Omnia MCU driver
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
• Re: [PATCH v7 1/1] drivers: watchdog: revise watchdog bootstatus
  • From: Chia Hsing Yin <peteryin.openbmc@xxxxxxxxx>
• Re: [PATCH] watchdog: sa1100: Fix PTR_ERR_OR_ZERO() vs NULL check in sa1100dog_probe()
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: sa1100: Fix PTR_ERR_OR_ZERO() vs NULL check in sa1100dog_probe()
  • From: Chen Ni <nichen@xxxxxxxxxxx>
• Re: [PATCH v7 1/1] drivers: watchdog: revise watchdog bootstatus
  • From: Andrew Jeffery <andrew@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v7 1/1] drivers: watchdog: revise watchdog bootstatus
  • From: Peter Yin <peteryin.openbmc@xxxxxxxxx>
• [PATCH v7 0/1] drivers: watchdog: revise watchdog bootstatus
  • From: Peter Yin <peteryin.openbmc@xxxxxxxxx>
• [PATCH v7 5/9] platform: cznic: turris-omnia-mcu: Add support for MCU watchdog
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH v7 2/9] platform: cznic: Add preliminary support for Turris Omnia MCU
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH v7 0/9] Turris Omnia MCU driver
  • From: Marek Behún <kabel@xxxxxxxxxx>
• Re: [PATCH RESEND v8 09/10] watchdog: rzg2l_wdt: Power on the PM domain in rzg2l_wdt_restart()
  • From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
• Re: [PATCH v6 00/11] Turris Omnia MCU driver
  • From: Andy Shevchenko <andy@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: watchdog: aspeed,ast2400-wdt: Convert to DT schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [RFC PATCH 0/6] Support ROHM BD96801 scalable PMIC
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [RFC][PATCH] watchdog: rti-wdt: Provide set_timeout handler to make existing userspace happy
  • From: Francesco Dolcini <francesco@xxxxxxxxxx>
• Re: [RFC][PATCH] watchdog: rti-wdt: Provide set_timeout handler to make existing userspace happy
  • From: Francesco Dolcini <francesco@xxxxxxxxxx>
• Re: [PATCH 1/1] watchdog: add HAS_IOPORT dependencies
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• Re: [RFC][PATCH] watchdog: rti-wdt: Provide set_timeout handler to make existing userspace happy
  • From: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
• Re: [RFC][PATCH] watchdog: rti-wdt: Provide set_timeout handler to make existing userspace happy
  • From: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
• Re: [RFC][PATCH] watchdog: rti-wdt: Provide set_timeout handler to make existing userspace happy
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFC][PATCH] watchdog: rti-wdt: Provide set_timeout handler to make existing userspace happy
  • From: Francesco Dolcini <francesco@xxxxxxxxxx>
• Re: [RFC PATCH v2 2/6] dt-bindings: mfd: bd96801 PMIC core
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [RFC PATCH v2 2/6] dt-bindings: mfd: bd96801 PMIC core
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v6 05/11] platform: cznic: turris-omnia-mcu: Add support for MCU watchdog
  • From: Marek Behún <kabel@xxxxxxxxxx>
• Re: [PATCH v6 05/11] platform: cznic: turris-omnia-mcu: Add support for MCU watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v6 05/11] platform: cznic: turris-omnia-mcu: Add support for MCU watchdog
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH v6 02/11] platform: cznic: Add preliminary support for Turris Omnia MCU
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH v6 00/11] Turris Omnia MCU driver
  • From: Marek Behún <kabel@xxxxxxxxxx>
• Re: [PATCH v3] watchdog: rti_wdt: Set min_hw_heartbeat_ms to accommodate a safety margin
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v3] watchdog: rti_wdt: Set min_hw_heartbeat_ms to accommodate a safety margin
  • From: Judith Mendez <jm@xxxxxx>
• Re: [RFC PATCH v2 5/6] watchdog: ROHM BD96801 PMIC WDG driver
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [RFC PATCH 3/6] mfd: support ROHM BD96801 PMIC core
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [RFC PATCH v2 5/6] watchdog: ROHM BD96801 PMIC WDG driver
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [RFC PATCH v2 5/6] watchdog: ROHM BD96801 PMIC WDG driver
  • From: George Cherian <george.cherian@xxxxxxxxxxx>
• Re: [RFC PATCH v2 1/6] dt-bindings: ROHM BD96801 PMIC regulators
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [RFC PATCH v2 2/6] dt-bindings: mfd: bd96801 PMIC core
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v4] watchdog: stm32_iwdg: Add pretimeout support
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [Linux-stm32] [PATCH v3] watchdog: stm32_iwdg: Add pretimeout support
  • From: Clement LE GOFFIC <clement.legoffic@xxxxxxxxxxx>
• Re: [RFC PATCH v2 2/6] dt-bindings: mfd: bd96801 PMIC core
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH] soc: mediatek: mtk-socinfo: Correct the marketing name for MT8188GV
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [RFC PATCH v2 1/6] dt-bindings: ROHM BD96801 PMIC regulators
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [RFC PATCH v2 2/6] dt-bindings: mfd: bd96801 PMIC core
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [RFC PATCH v2 2/6] dt-bindings: mfd: bd96801 PMIC core
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [RFC PATCH v2 2/6] dt-bindings: mfd: bd96801 PMIC core
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [RFC PATCH v2 2/6] dt-bindings: mfd: bd96801 PMIC core
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [RFC PATCH v2 1/6] dt-bindings: ROHM BD96801 PMIC regulators
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v9 00/38] ep93xx device tree conversion
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH RESEND v8 09/10] watchdog: rzg2l_wdt: Power on the PM domain in rzg2l_wdt_restart()
  • From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
• [RFC PATCH v2 6/6] MAINTAINERS: Add ROHM BD96801 'scalable PMIC' entries
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [RFC PATCH v2 5/6] watchdog: ROHM BD96801 PMIC WDG driver
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [RFC PATCH v2 4/6] regulator: bd96801: ROHM BD96801 PMIC regulators
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [RFC PATCH v2 3/6] mfd: support ROHM BD96801 PMIC core
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [RFC PATCH v2 2/6] dt-bindings: mfd: bd96801 PMIC core
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [RFC PATCH v2 1/6] dt-bindings: ROHM BD96801 PMIC regulators
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [RFC PATCH v2 0/6] Support ROHM BD96801 scalable PMIC
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH RESEND v8 09/10] watchdog: rzg2l_wdt: Power on the PM domain in rzg2l_wdt_restart()
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH RESEND v8 09/10] watchdog: rzg2l_wdt: Power on the PM domain in rzg2l_wdt_restart()
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v3 0/9] clk: renesas: rzg2l: Add support for power domains
  • From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
• Re: [RFC PATCH 3/6] mfd: support ROHM BD96801 PMIC core
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [RFC PATCH 3/6] mfd: support ROHM BD96801 PMIC core
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [RFC PATCH 3/6] mfd: support ROHM BD96801 PMIC core
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [RFC PATCH 3/6] mfd: support ROHM BD96801 PMIC core
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v3 0/9] clk: renesas: rzg2l: Add support for power domains
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH RESEND v8 09/10] watchdog: rzg2l_wdt: Power on the PM domain in rzg2l_wdt_restart()
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [RFC PATCH 3/6] mfd: support ROHM BD96801 PMIC core
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH RESEND v8 04/10] watchdog: rzg2l_wdt: Check return status of pm_runtime_put()
  • From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
• Re: (subset) [PATCH v3] dt-bindings: mfd: twl: Convert trivial subdevices to json-schema
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH RESEND v8 06/10] watchdog: rzg2l_wdt: Remove comparison with zero
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH RESEND v8 07/10] watchdog: rzg2l_wdt: Rely on the reset driver for doing proper reset
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH RESEND v8 10/10] dt-bindings: watchdog: renesas,wdt: Document RZ/G3S support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH RESEND v8 09/10] watchdog: rzg2l_wdt: Power on the PM domain in rzg2l_wdt_restart()
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH RESEND v8 08/10] watchdog: rzg2l_wdt: Add suspend/resume support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH RESEND v8 05/10] watchdog: rzg2l_wdt: Remove reset de-assert from probe
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH RESEND v8 04/10] watchdog: rzg2l_wdt: Check return status of pm_runtime_put()
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH RESEND v8 03/10] watchdog: rzg2l_wdt: Use pm_runtime_resume_and_get()
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH RESEND v8 02/10] watchdog: rzg2l_wdt: Make the driver depend on PM
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH RESEND v8 01/10] watchdog: rzg2l_wdt: Restrict the driver to ARCH_RZG2L and ARCH_R9A09G011
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/1] watchdog: add HAS_IOPORT dependencies
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• RE: [PATCH RESEND v8 03/10] watchdog: rzg2l_wdt: Use pm_runtime_resume_and_get()
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH RESEND v8 03/10] watchdog: rzg2l_wdt: Use pm_runtime_resume_and_get()
  • From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
• Re: [PATCH] watchdog/wdt-main: Use cpumask_of() to avoid cpumask var on stack
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• RE: [PATCH RESEND v8 03/10] watchdog: rzg2l_wdt: Use pm_runtime_resume_and_get()
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH RESEND v8 05/10] watchdog: rzg2l_wdt: Remove reset de-assert from probe
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• RE: [PATCH RESEND v8 03/10] watchdog: rzg2l_wdt: Use pm_runtime_resume_and_get()
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH RESEND v8 03/10] watchdog: rzg2l_wdt: Use pm_runtime_resume_and_get()
  • From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
• [PATCH RESEND v8 02/10] watchdog: rzg2l_wdt: Make the driver depend on PM
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• RE: [PATCH RESEND v8 03/10] watchdog: rzg2l_wdt: Use pm_runtime_resume_and_get()
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH RESEND v8 09/10] watchdog: rzg2l_wdt: Power on the PM domain in rzg2l_wdt_restart()
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH RESEND v8 10/10] dt-bindings: watchdog: renesas,wdt: Document RZ/G3S support
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH RESEND v8 08/10] watchdog: rzg2l_wdt: Add suspend/resume support
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH RESEND v8 07/10] watchdog: rzg2l_wdt: Rely on the reset driver for doing proper reset
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH RESEND v8 06/10] watchdog: rzg2l_wdt: Remove comparison with zero
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH RESEND v8 04/10] watchdog: rzg2l_wdt: Check return status of pm_runtime_put()
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH RESEND v8 03/10] watchdog: rzg2l_wdt: Use pm_runtime_resume_and_get()
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH RESEND v8 01/10] watchdog: rzg2l_wdt: Restrict the driver to ARCH_RZG2L and ARCH_R9A09G011
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH RESEND v8 00/10] watchdog: rzg2l_wdt: Add support for RZ/G3S
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH] watchdog/wdt-main: Use cpumask_of() to avoid cpumask var on stack
  • From: Dawei Li <set_pte_at@xxxxxxxxxxx>
• Re: [PATCH 1/1] watchdog: add HAS_IOPORT dependencies
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 1/1] watchdog: add HAS_IOPORT dependencies
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• [PATCH 0/1] watchdog: Handle HAS_IOPORT dependencies
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• Re: [PATCH v2] watchdog: rti_wdt: Set min_hw_heartbeat_ms to accommodate 5% safety margin
  • From: Judith Mendez <jm@xxxxxx>
• Re: [PATCH v2] watchdog: rti_wdt: Set min_hw_heartbeat_ms to accommodate 5% safety margin
  • From: Francesco Dolcini <francesco@xxxxxxxxxx>
• Re: [PATCH v2] watchdog: rti_wdt: Set min_hw_heartbeat_ms to accommodate 5% safety margin
  • From: Judith Mendez <jm@xxxxxx>
• Re: [PATCH v6 4/4] drivers: watchdog: ast2500 and ast2600 support bootstatus
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v6 4/4] drivers: watchdog: ast2500 and ast2600 support bootstatus
  • From: PeterYin <peteryin.openbmc@xxxxxxxxx>
• [PATCH] soc: mediatek: mtk-socinfo: Correct the marketing name for MT8188GV
  • From: Jason-ch Chen <jason-ch.chen@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: bd9576: Drop "always-running" property
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] i2c: i801: add I2C_MUX dependency
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: bd9576: Drop "always-running" property
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH] i2c: i801: add I2C_MUX dependency
  • From: "Arnd Bergmann" <arnd@xxxxxxxx>
• Re: [PATCH] i2c: i801: add I2C_MUX dependency
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2] watchdog: rti_wdt: Set min_hw_heartbeat_ms to accommodate 5% safety margin
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: rti_wdt: Set min_hw_heartbeat_ms to accommodate 5% safety margin
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] i2c: i801: add I2C_MUX dependency
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [RFC PATCH 0/6] Support ROHM BD96801 scalable PMIC
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] i2c: i801: add I2C_MUX dependency
  • From: "Arnd Bergmann" <arnd@xxxxxxxx>
• Re: [PATCH] i2c: i801: add I2C_MUX dependency
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH] i2c: i801: add I2C_MUX dependency
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• Re: [PATCH v2] watchdog: rti_wdt: Set min_hw_heartbeat_ms to accommodate 5% safety margin
  • From: Rafael Beims <rafael@xxxxxxxx>
• Re: [PATCH] watchdog: rti_wdt: Set min_hw_heartbeat_ms to accommodate 5% safety margin
  • From: Rafael Beims <rafael@xxxxxxxx>
• Re: [RFC PATCH 0/6] Support ROHM BD96801 scalable PMIC
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v2] watchdog: rti_wdt: Set min_hw_heartbeat_ms to accommodate 5% safety margin
  • From: Judith Mendez <jm@xxxxxx>
• Re: [PATCH] watchdog: rti_wdt: Set min_hw_heartbeat_ms to accommodate 5% safety margin
  • From: Judith Mendez <jm@xxxxxx>
• Re: [RFC PATCH 0/6] Support ROHM BD96801 scalable PMIC
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [RFC PATCH 0/6] Support ROHM BD96801 scalable PMIC
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] watchdog: rti_wdt: Set min_hw_heartbeat_ms to accommodate 5% safety margin
  • From: Francesco Dolcini <francesco@xxxxxxxxxx>
• Re: [RFC PATCH 0/6] Support ROHM BD96801 scalable PMIC
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v6 3/4] dt-bindings: watchdog: aspeed-wdt: Add aspeed,scu
  • From: Andrew Jeffery <andrew@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: watchdog: aspeed,ast2400-wdt: Convert to DT schema
  • From: Andrew Jeffery <andrew@xxxxxxxxxxxxxxxxxxxx>
• [PATCH] watchdog: rti_wdt: Set min_hw_heartbeat_ms to accommodate 5% safety margin
  • From: Judith Mendez <jm@xxxxxx>
• Re: [PATCH v2] dt-bindings: watchdog: aspeed,ast2400-wdt: Convert to DT schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [RFC PATCH 5/6] watchdog: ROHM BD96801 PMIC WDG driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFC PATCH 5/6] watchdog: ROHM BD96801 PMIC WDG driver
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [RFC PATCH 5/6] watchdog: ROHM BD96801 PMIC WDG driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v6 3/4] dt-bindings: watchdog: aspeed-wdt: Add aspeed,scu
  • From: PeterYin <peteryin.openbmc@xxxxxxxxx>
• Re: [RFC PATCH 5/6] watchdog: ROHM BD96801 PMIC WDG driver
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v2] dt-bindings: watchdog: aspeed,ast2400-wdt: Convert to DT schema
  • From: Andrew Jeffery <andrew@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: Convert Aspeed binding to DT schema
  • From: Zev Weiss <zev@xxxxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: Convert Aspeed binding to DT schema
  • From: Andrew Jeffery <andrew@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: Convert Aspeed binding to DT schema
  • From: Andrew Jeffery <andrew@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: Convert Aspeed binding to DT schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [RFC PATCH 5/6] watchdog: ROHM BD96801 PMIC WDG driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v5 02/11] platform: cznic: Add preliminary support for Turris Omnia MCU
  • From: Marek Behún <marek.behun@xxxxxx>
• Re: [RFC PATCH 5/6] watchdog: ROHM BD96801 PMIC WDG driver
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RFC PATCH 6/6] MAINTAINERS: Add ROHM BD96801 'scalable PMIC' entries
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [RFC PATCH 5/6] watchdog: ROHM BD96801 PMIC WDG driver
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [RFC PATCH 3/6] mfd: support ROHM BD96801 PMIC core
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [RFC PATCH 2/6] dt-bindings: mfd: bd96801 PMIC core
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [RFC PATCH 1/6] dt-bindings: ROHM BD96801 PMIC regulators
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [RFC PATCH 0/6] Support ROHM BD96801 scalable PMIC
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v6 3/4] dt-bindings: watchdog: aspeed-wdt: Add aspeed,scu
  • From: Andrew Jeffery <andrew@xxxxxxxxxxxxxxxxxxxx>
• [PATCH] dt-bindings: watchdog: Convert Aspeed binding to DT schema
  • From: Andrew Jeffery <andrew@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] dt-bindings: mfd: twl: Convert trivial subdevices to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v6 3/4] dt-bindings: watchdog: aspeed-wdt: Add aspeed,scu
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v3] dt-bindings: mfd: twl: Convert trivial subdevices to json-schema
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH v5 4/4] drivers: watchdog: ast2500 and ast2600 support bootstatus
  • From: PeterYin <peteryin.openbmc@xxxxxxxxx>
• [PATCH v6 4/4] drivers: watchdog: ast2500 and ast2600 support bootstatus
  • From: Peter Yin <peteryin.openbmc@xxxxxxxxx>
• [PATCH v6 3/4] dt-bindings: watchdog: aspeed-wdt: Add aspeed,scu
  • From: Peter Yin <peteryin.openbmc@xxxxxxxxx>
• [PATCH v6 2/4] ARM: dts: aspeed: Add the AST2600 WDT with SCU register
  • From: Peter Yin <peteryin.openbmc@xxxxxxxxx>
• [PATCH v6 1/4] ARM: dts: aspeed: Add the AST2500 WDT with SCU register
  • From: Peter Yin <peteryin.openbmc@xxxxxxxxx>
• [PATCH v6 0/4] drivers: watchdog: ast2500 and ast2600 support bootstatus
  • From: Peter Yin <peteryin.openbmc@xxxxxxxxx>
• [PATCH v5 4/4] drivers: watchdog: ast2500 and ast2600 support bootstatus
  • From: Peter Yin <peteryin.openbmc@xxxxxxxxx>
• [PATCH v5 3/4] dt-bindings: watchdog: aspeed-wdt: Add aspeed,scu
  • From: Peter Yin <peteryin.openbmc@xxxxxxxxx>
• [PATCH v5 2/4] ARM: dts: aspeed: Add the AST2600 WDT with SCU register
  • From: Peter Yin <peteryin.openbmc@xxxxxxxxx>
• [PATCH v5 1/4] ARM: dts: aspeed: Add the AST2500 WDT with SCU register
  • From: Peter Yin <peteryin.openbmc@xxxxxxxxx>
• [PATCH v5 0/4] drivers: watchdog: ast2500 and ast2600 support bootstatus
  • From: Peter Yin <peteryin.openbmc@xxxxxxxxx>
• [PATCH v5 0/4] drivers: watchdog: ast2500 and ast2600 support bootstatus
  • From: Peter Yin <peteryin.openbmc@xxxxxxxxx>
• Re: [PATCH] watchdog: mtx-1: drop driver owner assignment
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: mtx-1: drop driver owner assignment
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 4/4] drivers: watchdog: ast2500 and ast2600 support bootstatus
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4 4/4] drivers: watchdog: ast2500 and ast2600 support bootstatus
  • From: Chia Hsing Yin <peteryin.openbmc@xxxxxxxxx>
• Re: [PATCH v9 00/38] ep93xx device tree conversion
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v4 4/4] drivers: watchdog: ast2500 and ast2600 support bootstatus
  • From: Peter Yin <peteryin.openbmc@xxxxxxxxx>
• [PATCH v4 3/4] dt-bindings: watchdog: aspeed-wdt: Add aspeed,scu
  • From: Peter Yin <peteryin.openbmc@xxxxxxxxx>
• [PATCH v4 2/4] ARM: dts: aspeed: Add the AST2600 WDT with SCU register
  • From: Peter Yin <peteryin.openbmc@xxxxxxxxx>
• [PATCH v4 1/4] ARM: dts: aspeed: Add the AST2500 WDT with SCU register
  • From: Peter Yin <peteryin.openbmc@xxxxxxxxx>
• [PATCH v4 0/4] drivers: watchdog: ast2500 and ast2600 support bootstatus
  • From: Peter Yin <peteryin.openbmc@xxxxxxxxx>
• Re: [PATCH v9 00/38] ep93xx device tree conversion
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 4/4] drivers: watchdog: ast2500 and ast2600 support bootstatus
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v3 4/4] drivers: watchdog: ast2500 and ast2600 support bootstatus
  • From: Peter Yin <peteryin.openbmc@xxxxxxxxx>
• [PATCH v3 3/4] dt-bindings: watchdog: aspeed-wdt: Add aspeed,scu
  • From: Peter Yin <peteryin.openbmc@xxxxxxxxx>
• [PATCH v3 2/4] ARM: dts: aspeed: Add the AST2600 WDT with SCU register
  • From: Peter Yin <peteryin.openbmc@xxxxxxxxx>
• [PATCH v3 1/4] ARM: dts: aspeed: Add the AST2500 WDT with SCU register
  • From: Peter Yin <peteryin.openbmc@xxxxxxxxx>
• [PATCH v3 0/4] drivers: watchdog: ast2500 and ast2600 support bootstatus
  • From: Peter Yin <peteryin.openbmc@xxxxxxxxx>
• Re: [PATCH v9 00/38] ep93xx device tree conversion
  • From: Andy Shevchenko <andy@xxxxxxxxxx>
• Re: [PATCH v9 00/38] ep93xx device tree conversion
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v9 00/38] ep93xx device tree conversion
  • From: "Arnd Bergmann" <arnd@xxxxxxxx>
• [PATCH v9 24/38] wdt: ts72xx: add DT support for ts72xx
  • From: Nikita Shubin via B4 Relay <devnull+nikita.shubin.maquefel.me@xxxxxxxxxx>
• [PATCH v9 11/38] watchdog: ep93xx: add DT support for Cirrus EP93xx
  • From: Nikita Shubin via B4 Relay <devnull+nikita.shubin.maquefel.me@xxxxxxxxxx>
• [PATCH v9 10/38] dt-bindings: watchdog: Add Cirrus EP93x
  • From: Nikita Shubin via B4 Relay <devnull+nikita.shubin.maquefel.me@xxxxxxxxxx>
• [PATCH v9 00/38] ep93xx device tree conversion
  • From: Nikita Shubin via B4 Relay <devnull+nikita.shubin.maquefel.me@xxxxxxxxxx>
• Re: [PATCH v2] drivers: watchdog: ast2600 support bootstatus
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: mfd: twl: Convert trivial subdevices to json-schema
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v5 02/11] platform: cznic: Add preliminary support for Turris Omnia MCU
  • From: Marek Behún <kabel@xxxxxxxxxx>
• Re: [PATCH v3 0/3] Introduce EC-based watchdog
  • From: patchwork-bot+chrome-platform@xxxxxxxxxx
• Re: [PATCH v4 0/3] Introduce EC-based watchdog
  • From: patchwork-bot+chrome-platform@xxxxxxxxxx
• Re: [PATCH v4 0/3] Introduce EC-based watchdog
  • From: patchwork-bot+chrome-platform@xxxxxxxxxx
• Re: [PATCH v3 0/3] Introduce EC-based watchdog
  • From: patchwork-bot+chrome-platform@xxxxxxxxxx
• Re: [PATCH] watchdog: cpu5wdt.c: Fix use-after-free bug caused by cpu5wdt_trigger
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v5 02/11] platform: cznic: Add preliminary support for Turris Omnia MCU
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 02/11] platform: cznic: Add preliminary support for Turris Omnia MCU
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH] watchdog: cpu5wdt.c: Fix use-after-free bug caused by cpu5wdt_trigger
  • From: Duoming Zhou <duoming@xxxxxxxxxx>
• Re: [PATCH v5 02/11] platform: cznic: Add preliminary support for Turris Omnia MCU
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v5 05/11] platform: cznic: turris-omnia-mcu: Add support for MCU watchdog
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH v5 02/11] platform: cznic: Add preliminary support for Turris Omnia MCU
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH v5 00/11] Turris Omnia MCU driver
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH v3] watchdog: stm32_iwdg: Add pretimeout support
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v2] drivers: watchdog: ast2600 support bootstatus
  • From: PeterYin <peteryin.openbmc@xxxxxxxxx>
• Re: [PATCH] watchdog: xilinx_wwdt: Add check for timeout limit and set maximum value if exceeded
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: xilinx_wwdt: Add check for timeout limit and set maximum value if exceeded
  • From: Harini T <harini.t@xxxxxxx>
• Re: [PATCH v2] drivers: watchdog: ast2600 support bootstatus
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: mfd: twl: Convert trivial subdevices to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] dt-bindings: mfd: twl: Convert trivial subdevices to json-schema
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH v8 00/10] watchdog: rzg2l_wdt: Add support for RZ/G3S
  • From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
• Re: [PATCH v2] drivers: watchdog: ast2600 support bootstatus
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2] drivers: watchdog: ast2600 support bootstatus
  • From: Peter Yin <peteryin.openbmc@xxxxxxxxx>
• Re: [GIT PULL REQUEST] watchdog - v6.9 release cycle.
  • From: pr-tracker-bot@xxxxxxxxxx
• [GIT PULL REQUEST] watchdog - v6.9 release cycle.
  • From: Wim Van Sebroeck <wim@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: lenovo_se10_wdt: Watchdog driver for Lenovo SE10 platform
  • From: "Mark Pearson" <mpearson-lenovo@xxxxxxxxx>
• Re: [PATCH] watchdog: lenovo_se10_wdt: Watchdog driver for Lenovo SE10 platform
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: lenovo_se10_wdt: Watchdog driver for Lenovo SE10 platform
  • From: Mark Pearson <mpearson-lenovo@xxxxxxxxx>
• Re: [PATCH v1] drivers: watchdog: ast2600 support bootstatus
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v1] drivers: watchdog: ast2600 support bootstatus
  • From: Peter Yin <peteryin.openbmc@xxxxxxxxx>
• Enquiry
  • From: Aminda Sebastian <info@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v10 2/4] ARM: dts: wpcm450: Remove clock-output-names from reference clock node
  • From: J. Neuschäfer <j.neuschaefer@xxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: sprd,sp9860-wdt: convert to YAML
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: sprd,sp9860-wdt: convert to YAML
  • From: Stanislav Jakubek <stano.jakubek@xxxxxxxxx>
• Re: [PATCH v10 2/4] ARM: dts: wpcm450: Remove clock-output-names from reference clock node
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v10 4/4] ARM: dts: wpcm450: Switch clocks to clock controller
  • From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
• [PATCH v10 3/4] clk: wpcm450: Add Nuvoton WPCM450 clock/reset controller driver
  • From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
• [PATCH v10 1/4] dt-bindings: clock: Add Nuvoton WPCM450 clock/reset controller
  • From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
• [PATCH v10 2/4] ARM: dts: wpcm450: Remove clock-output-names from reference clock node
  • From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
• [PATCH v10 0/4] Nuvoton WPCM450 clock and reset driver
  • From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
• 판매 문의 2024
  • From: info@xxxxxxxxxxxxxxxxxxxxxx
• Re: [PATCH v1 3/3] watchdog: intel-mid_wdt: Get platform data via dev_get_platdata()
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v1 2/3] watchdog: intel-mid_wdt: Don't use "proxy" headers
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v1 1/3] watchdog: intel-mid_wdt: Remove unused intel-mid.h
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v1 3/3] watchdog: intel-mid_wdt: Get platform data via dev_get_platdata()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 0/3] watchdog: intel-mid_wdt: header and code cleanups
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 2/3] watchdog: intel-mid_wdt: Don't use "proxy" headers
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 1/3] watchdog: intel-mid_wdt: Remove unused intel-mid.h
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• RE: [PATCH v5 1/2] dt-bindings: watchdog: starfive,jh7100-wdt: Add compatible for JH8100
  • From: JiSheng Teoh <jisheng.teoh@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2] watchdog: qcom: fine tune the max timeout value calculation
  • From: gituser@xxxxxxxxxxxxxxxxxxxxxx
• Re: [PATCH] dt-bindings: watchdog: drop obsolete brcm,bcm2835-pm-wdt bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH RESEND] dt-bindings: watchdog: qcom-wdt: Update maintainer to Rajendra Nayak
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 00/39] Add support for sam9x7 SoC family
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] Watchdog: New module for ITE 5632 watchdog
  • From: "Mark Pearson" <mpearson@xxxxxxxxx>
• Re: [PATCH v3] Watchdog: New module for ITE 5632 watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3] Watchdog: New module for ITE 5632 watchdog
  • From: "Mark Pearson" <mpearson@xxxxxxxxx>
• Re: [PATCH v3] Watchdog: New module for ITE 5632 watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3] Watchdog: New module for ITE 5632 watchdog
  • From: "Mark Pearson" <mpearson@xxxxxxxxx>
• Re: [PATCH] watchdog: stm32_iwdg: initialize default timeout
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: stm32_iwdg: initialize default timeout
  • From: Ben Wolsieffer <ben.wolsieffer@xxxxxxxxxxx>
• Re: (subset) [PATCH v4 00/39] Add support for sam9x7 SoC family
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v8 10/10] dt-bindings: watchdog: renesas,wdt: Document RZ/G3S support
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v8 09/10] watchdog: rzg2l_wdt: Power on the PM domain in rzg2l_wdt_restart()
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v8 08/10] watchdog: rzg2l_wdt: Add suspend/resume support
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v8 07/10] watchdog: rzg2l_wdt: Rely on the reset driver for doing proper reset
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v8 06/10] watchdog: rzg2l_wdt: Remove comparison with zero
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v8 05/10] watchdog: rzg2l_wdt: Remove reset de-assert from probe
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v8 04/10] watchdog: rzg2l_wdt: Check return status of pm_runtime_put()
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v8 03/10] watchdog: rzg2l_wdt: Use pm_runtime_resume_and_get()
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v8 02/10] watchdog: rzg2l_wdt: Make the driver depend on PM
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v8 01/10] watchdog: rzg2l_wdt: Restrict the driver to ARCH_RZG2L and ARCH_R9A09G011
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v8 00/10] watchdog: rzg2l_wdt: Add support for RZ/G3S
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• Re: [PATCH v8 00/38] ep93xx device tree conversion
  • From: Nikita Shubin <nikita.shubin@xxxxxxxxxxx>
• Re: [PATCH v2] watchdog: qcom: fine tune the max timeout value calculation
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• Re: [PATCH v5 1/2] dt-bindings: watchdog: starfive,jh7100-wdt: Add compatible for JH8100
  • From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
• Re: (subset) [PATCH v4 00/39] Add support for sam9x7 SoC family
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• RE: [PATCH v5 1/2] dt-bindings: watchdog: starfive,jh7100-wdt: Add compatible for JH8100
  • From: JiSheng Teoh <jisheng.teoh@xxxxxxxxxxxxxxxx>
• Re: [PATCH v4 00/39] Add support for sam9x7 SoC family
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH v3] Watchdog: New module for ITE 5632 watchdog
  • From: "Mark Pearson" <mpearson@xxxxxxxxx>
• Re: [PATCH v8 00/38] ep93xx device tree conversion
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v8 10/38] dt-bindings: watchdog: Add Cirrus EP93x
  • From: Nikita Shubin via B4 Relay <devnull+nikita.shubin.maquefel.me@xxxxxxxxxx>
• [PATCH v8 24/38] wdt: ts72xx: add DT support for ts72xx
  • From: Nikita Shubin via B4 Relay <devnull+nikita.shubin.maquefel.me@xxxxxxxxxx>
• [PATCH v8 11/38] watchdog: ep93xx: add DT support for Cirrus EP93xx
  • From: Nikita Shubin via B4 Relay <devnull+nikita.shubin.maquefel.me@xxxxxxxxxx>
• [PATCH v8 00/38] ep93xx device tree conversion
  • From: Nikita Shubin via B4 Relay <devnull+nikita.shubin.maquefel.me@xxxxxxxxxx>
• Re: [PATCH v6 0/2] Add regmap support to exynos-pmu for protected PMU regs
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3] Watchdog: New module for ITE 5632 watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3] Watchdog: New module for ITE 5632 watchdog
  • From: "Mark Pearson" <mpearson@xxxxxxxxx>
• Re: [PATCH v4 15/39] dt-bindings: watchdog: sama5d4-wdt: add compatible for sam9x7-wdt
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [External] Re: [PATCH v2] watchdog: add in watchdog for nct6686
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• RE: [External] Re: [PATCH v2] watchdog: add in watchdog for nct6686
  • From: David Ober <dober@xxxxxxxxxx>
• Re: [PATCH v2] watchdog: add in watchdog for nct6686
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3] Watchdog: New module for ITE 5632 watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: (subset) [PATCH v4 00/39] Add support for sam9x7 SoC family
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3] Watchdog: New module for ITE 5632 watchdog
  • From: "Mark Pearson" <mpearson@xxxxxxxxx>
• Re: [PATCH v3] Watchdog: New module for ITE 5632 watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3] Watchdog: New module for ITE 5632 watchdog
  • From: "Mark Pearson" <mpearson@xxxxxxxxx>
• Re: [PATCH v2] watchdog: add in watchdog for nct6686
  • From: "Mark Pearson" <mpearson-lenovo@xxxxxxxxx>
• [PATCH v4 15/39] dt-bindings: watchdog: sama5d4-wdt: add compatible for sam9x7-wdt
  • From: Varshini Rajendran <varshini.rajendran@xxxxxxxxxxxxx>
• [PATCH v4 00/39] Add support for sam9x7 SoC family
  • From: Varshini Rajendran <varshini.rajendran@xxxxxxxxxxxxx>
• [PATCH RESEND] dt-bindings: watchdog: qcom-wdt: Update maintainer to Rajendra Nayak
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• [GIT PULL] Immutable branch between MFD, Input and Thermal due for the v6.9 merge window
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 2/2] dt-bindings: watchdog: arm,sp805: document the reset signal
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 1/2] watchdog: sp805_wdt: deassert the reset if available
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 1/2] watchdog: sp805_wdt: deassert the reset if available
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] watchdog: sp805_wdt: deassert the reset if available
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• [PATCH v3 2/2] dt-bindings: watchdog: arm,sp805: document the reset signal
  • From: Yang Xiwen via B4 Relay <devnull+forbidden405.outlook.com@xxxxxxxxxx>
• [PATCH v3 1/2] watchdog: sp805_wdt: deassert the reset if available
  • From: Yang Xiwen via B4 Relay <devnull+forbidden405.outlook.com@xxxxxxxxxx>
• [PATCH v3 0/2] watchdog: sp805: add reset control support
  • From: Yang Xiwen via B4 Relay <devnull+forbidden405.outlook.com@xxxxxxxxxx>
• Re: [PATCH v2 1/2] watchdog: sp805_wdt: deassert the reset if available
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• [PATCH v6 2/2] watchdog: s3c2410_wdt: use exynos_get_pmu_regmap_by_phandle() for PMU regs
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v6 1/2] soc: samsung: exynos-pmu: Add regmap support for SoCs that protect PMU regs
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v6 0/2] Add regmap support to exynos-pmu for protected PMU regs
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH v5 1/2] soc: samsung: exynos-pmu: Add regmap support for SoCs that protect PMU regs
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH v4 1/2] soc: samsung: exynos-pmu: Add regmap support for SoCs that protect PMU regs
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH v4 1/2] soc: samsung: exynos-pmu: Add regmap support for SoCs that protect PMU regs
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v5 1/2] soc: samsung: exynos-pmu: Add regmap support for SoCs that protect PMU regs
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH v5 2/2] watchdog: s3c2410_wdt: use exynos_get_pmu_regmap_by_phandle() for PMU regs
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v5 1/2] soc: samsung: exynos-pmu: Add regmap support for SoCs that protect PMU regs
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v5 0/2] Add regmap support to exynos-pmu for protected PMU regs
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH v4 1/2] soc: samsung: exynos-pmu: Add regmap support for SoCs that protect PMU regs
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH v2 1/2] watchdog: sp805_wdt: deassert the reset if available
  • From: Yang Xiwen <forbidden405@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] watchdog: sp805_wdt: deassert the reset if available
  • From: Yang Xiwen <forbidden405@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] watchdog: sp805_wdt: deassert the reset if available
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• [PATCH v2 2/2] dt-bindings: watchdog: arm,sp805: document the reset signal
  • From: Yang Xiwen via B4 Relay <devnull+forbidden405.outlook.com@xxxxxxxxxx>
• [PATCH v2 1/2] watchdog: sp805_wdt: deassert the reset if available
  • From: Yang Xiwen via B4 Relay <devnull+forbidden405.outlook.com@xxxxxxxxxx>
• [PATCH v2 0/2] watchdog: sp805: add reset control support
  • From: Yang Xiwen via B4 Relay <devnull+forbidden405.outlook.com@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: sprd,sp9860-wdt: convert to YAML
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: sprd,sp9860-wdt: convert to YAML
  • From: Chunyan Zhang <zhang.lyra@xxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: drop obsolete brcm,bcm2835-pm-wdt bindings
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH] dt-bindings: watchdog: sprd,sp9860-wdt: convert to YAML
  • From: Stanislav Jakubek <stano.jakubek@xxxxxxxxx>
• [PATCH] dt-bindings: watchdog: drop obsolete brcm,bcm2835-pm-wdt bindings
  • From: Stanislav Jakubek <stano.jakubek@xxxxxxxxx>
• Re: [PATCH 2/2] dt-binding: watchdog: arm,sp805: document the reset signal
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 1/2] watchdog: sp805_wdt: deassert the reset if available
  • From: Yang Xiwen via B4 Relay <devnull+forbidden405.outlook.com@xxxxxxxxxx>
• [PATCH 2/2] dt-binding: watchdog: arm,sp805: document the reset signal
  • From: Yang Xiwen via B4 Relay <devnull+forbidden405.outlook.com@xxxxxxxxxx>
• [PATCH 0/2] watchdog: sp805: add reset control support
  • From: Yang Xiwen via B4 Relay <devnull+forbidden405.outlook.com@xxxxxxxxxx>
• Re: [PATCH v2] ARM: dts: qcom: msm8226: Add watchdog node
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: qcom-wdt: Update maintainer to Rajendra Nayak
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH v4 1/2] soc: samsung: exynos-pmu: Add regmap support for SoCs that protect PMU regs
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v7 2/9] watchdog: rzg2l_wdt: Make the driver depend on PM
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v7 9/9] dt-bindings: watchdog: renesas,wdt: Document RZ/G3S support
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v7 8/9] watchdog: rzg2l_wdt: Add suspend/resume support
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v7 7/9] watchdog: rzg2l_wdt: Rely on the reset driver for doing proper reset
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v7 6/9] watchdog: rzg2l_wdt: Remove comparison with zero
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v7 5/9] watchdog: rzg2l_wdt: Remove reset de-assert from probe
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v7 4/9] watchdog: rzg2l_wdt: Check return status of pm_runtime_put()
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v7 3/9] watchdog: rzg2l_wdt: Use pm_runtime_resume_and_get()
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v7 2/9] watchdog: rzg2l_wdt: Make the driver depend on PM
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v7 1/9] watchdog: rzg2l_wdt: Restrict the driver to ARCH_RZG2L and ARCH_R9A09G011
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v7 0/9] watchdog: rzg2l_wdt: Add support for RZ/G3S
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v2] ARM: dts: qcom: msm8226: Add watchdog node
  • From: Luca Weiss <luca@xxxxxxxxx>
• Re: [PATCH v2 1/1] watchdog/hpwdt: Support Suspend and Resume
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2 1/1] watchdog/hpwdt: Support Suspend and Resume
  • From: Jerry Hoemann <jerry.hoemann@xxxxxxx>
• [PATCH v2 0/1] watchdog/hpwdt: Support Suspend and Resume
  • From: Jerry Hoemann <jerry.hoemann@xxxxxxx>
• Re: [PATCH v6 2/9] watchdog: rzg2l_wdt: Make the driver depend on PM
  • From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
• Re: [PATCH v6 2/9] watchdog: rzg2l_wdt: Make the driver depend on PM
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] watchdog/hpwdt: Support Suspend and Resume
  • From: Jerry Hoemann <jerry.hoemann@xxxxxxx>
• Re: [PATCH] watchdog/hpwdt: Support Suspend and Resume
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v7 00/39] ep93xx device tree conversion
  • From: Nikita Shubin <nikita.shubin@xxxxxxxxxxx>
• [PATCH] watchdog/hpwdt: Support Suspend and Resume
  • From: Jerry Hoemann <jerry.hoemann@xxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: qcom-wdt: Update maintainer to Rajendra Nayak
  • From: Rajendra Nayak <quic_rjendra@xxxxxxxxxxx>
• Re: [PATCH v4 1/2] soc: samsung: exynos-pmu: Add regmap support for SoCs that protect PMU regs
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: [PATCH v4 2/2] watchdog: s3c2410_wdt: use exynos_get_pmu_regmap_by_phandle() for PMU regs
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: qcom-wdt: Update maintainer to Rajendra Nayak
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] dt-bindings: watchdog: qcom-wdt: Update maintainer to Rajendra Nayak
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH v4 1/2] soc: samsung: exynos-pmu: Add regmap support for SoCs that protect PMU regs
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH v4 1/2] soc: samsung: exynos-pmu: Add regmap support for SoCs that protect PMU regs
  • From: Alexey Klimov <alexey.klimov@xxxxxxxxxx>
• Re: [PATCH v4 2/2] watchdog: s3c2410_wdt: use exynos_get_pmu_regmap_by_phandle() for PMU regs
  • From: Alexey Klimov <alexey.klimov@xxxxxxxxxx>
• Re: [PATCH v4 1/2] soc: samsung: exynos-pmu: Add regmap support for SoCs that protect PMU regs
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: [PATCH v4 2/2] watchdog: s3c2410_wdt: use exynos_get_pmu_regmap_by_phandle() for PMU regs
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v4 2/2] watchdog: s3c2410_wdt: use exynos_get_pmu_regmap_by_phandle() for PMU regs
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v4 0/2] Add regmap support to exynos-pmu for protected PMU regs
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v4 1/2] soc: samsung: exynos-pmu: Add regmap support for SoCs that protect PMU regs
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH v6 RESEND 0/6] Convert DA906{1,2} bindings to json-schema
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v6 RESEND 0/6] Convert DA906{1,2} bindings to json-schema
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v6 2/9] watchdog: rzg2l_wdt: Make the driver depend on PM
  • From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
• Re: [PATCH v6 2/9] watchdog: rzg2l_wdt: Make the driver depend on PM
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v6 9/9] dt-bindings: watchdog: renesas,wdt: Document RZ/G3S support
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v6 8/9] watchdog: rzg2l_wdt: Add suspend/resume support
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v6 7/9] watchdog: rzg2l_wdt: Rely on the reset driver for doing proper reset
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v6 6/9] watchdog: rzg2l_wdt: Remove comparison with zero
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v6 5/9] watchdog: rzg2l_wdt: Remove reset de-assert from probe
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v6 3/9] watchdog: rzg2l_wdt: Use pm_runtime_resume_and_get()
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v6 4/9] watchdog: rzg2l_wdt: Check return status of pm_runtime_put()
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v6 2/9] watchdog: rzg2l_wdt: Make the driver depend on PM
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v6 1/9] watchdog: rzg2l_wdt: Restrict the driver to ARCH_RZG2L and ARCH_R9A09G011
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v6 0/9] watchdog: rzg2l_wdt: Add support for RZ/G3S
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• Re: [PATCH v2 1/2] soc: samsung: exynos-pmu: Add regmap support for SoCs that protect PMU regs
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v5 2/9] watchdog: rzg2l_wdt: Make the driver depend on PM
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v5 9/9] dt-bindings: watchdog: renesas,wdt: Document RZ/G3S support
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v5 8/9] watchdog: rzg2l_wdt: Add suspend/resume support
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v5 7/9] watchdog: rzg2l_wdt: Rely on the reset driver for doing proper reset
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v5 6/9] watchdog: rzg2l_wdt: Remove comparison with zero
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v5 5/9] watchdog: rzg2l_wdt: Remove reset de-assert from probe
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v5 4/9] watchdog: rzg2l_wdt: Check return status of pm_runtime_put()
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v5 3/9] watchdog: rzg2l_wdt: Use pm_runtime_resume_and_get()
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v5 2/9] watchdog: rzg2l_wdt: Make the driver depend on PM
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v5 1/9] watchdog: rzg2l_wdt: Restrict the driver to ARCH_RZG2L and ARCH_R9A09G011
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v5 0/9] watchdog: rzg2l_wdt: Add support for RZ/G3S
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• Re: [PATCH v2 1/2] soc: samsung: exynos-pmu: Add regmap support for SoCs that protect PMU regs
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH v3 1/2] soc: samsung: exynos-pmu: Add regmap support for SoCs that protect PMU regs
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH -next] watchdog: Add kernel-doc for wdt_set_timeout()
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH -next] watchdog: Add kernel-doc for wdt_set_timeout()
  • From: Yang Li <yang.lee@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/9] watchdog: rzg2l_wdt: Make the driver depend on PM
  • From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
• Re: [PATCH v4 2/9] watchdog: rzg2l_wdt: Make the driver depend on PM
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v4 9/9] dt-bindings: watchdog: renesas,wdt: Document RZ/G3S support
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v4 8/9] watchdog: rzg2l_wdt: Add suspend/resume support
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v4 7/9] watchdog: rzg2l_wdt: Rely on the reset driver for doing proper reset
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v4 6/9] watchdog: rzg2l_wdt: Remove comparison with zero
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v4 5/9] watchdog: rzg2l_wdt: Remove reset de-assert on probe/stop
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v4 4/9] watchdog: rzg2l_wdt: Check return status of pm_runtime_put()
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v4 3/9] watchdog: rzg2l_wdt: Use pm_runtime_resume_and_get()
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v4 2/9] watchdog: rzg2l_wdt: Make the driver depend on PM
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v4 1/9] watchdog: rzg2l_wdt: Restrict the driver to ARCH_RZG2L and ARCH_R9A09G011
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v4 0/9] watchdog: rzg2l_wdt: Add support for RZ/G3S
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• Re: [PATCH v2 1/2] soc: samsung: exynos-pmu: Add regmap support for SoCs that protect PMU regs
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/2] soc: samsung: exynos-pmu: Add regmap support for SoCs that protect PMU regs
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 8/8] dt-bindings: watchdog: renesas,wdt: Document RZ/G3S support
  • From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
• Re: [PATCH v3 1/8] watchdog: rzg2l_wdt: Select PM
  • From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
• Re: [PATCH v7 00/39] ep93xx device tree conversion
  • From: andy.shevchenko@xxxxxxxxx
• Re: [PATCH] dt-bindings: watchdog: renesas-wdt: Add support for R-Car V4M
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] watchdog: qcom: fine tune the max timeout value calculation
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• Re: [PATCH v3 1/2] soc: samsung: exynos-pmu: Add regmap support for SoCs that protect PMU regs
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: [PATCH v3 8/8] dt-bindings: watchdog: renesas,wdt: Document RZ/G3S support
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH v3 2/2] watchdog: s3c2410_wdt: use exynos_get_pmu_regmap_by_phandle() for PMU regs
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v3 1/2] soc: samsung: exynos-pmu: Add regmap support for SoCs that protect PMU regs
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v3 0/2] Add regmap support to exynos-pmu for protected PMU regs
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [GIT PULL] Immutable branch between MFD, CROS and Watchdog due for the v6.9 merge window
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [GIT PULL] Immutable branch between MFD, CROS and Watchdog due for the v6.9 merge window
  • From: Łukasz Majczak <lma@xxxxxxxxxxxx>
• RE: [PATCH v3 1/8] watchdog: rzg2l_wdt: Select PM
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• RE: [PATCH v3 1/8] watchdog: rzg2l_wdt: Select PM
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v3 6/8] watchdog: rzg2l_wdt: Rely on the reset driver for doing proper reset
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• RE: [PATCH v3 1/8] watchdog: rzg2l_wdt: Select PM
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v3 8/8] dt-bindings: watchdog: renesas,wdt: Document RZ/G3S support
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v3 7/8] watchdog: rzg2l_wdt: Add suspend/resume support
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v3 6/8] watchdog: rzg2l_wdt: Rely on the reset driver for doing proper reset
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v3 5/8] watchdog: rzg2l_wdt: Remove comparison with zero
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v3 4/8] watchdog: rzg2l_wdt: Remove reset de-assert on probe/stop
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v3 3/8] watchdog: rzg2l_wdt: Check return status of pm_runtime_put()
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v3 2/8] watchdog: rzg2l_wdt: Use pm_runtime_resume_and_get()
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v3 1/8] watchdog: rzg2l_wdt: Select PM
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v3 0/8] watchdog: rzg2l_wdt: Add support for RZ/G3S
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• Re: [PATCH v2 02/11] watchdog: rzg2l_wdt: Select PM
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: renesas-wdt: Add support for R-Car V4M
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: renesas-wdt: Add support for R-Car V4M
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v2 02/11] watchdog: rzg2l_wdt: Select PM
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [GIT PULL] Immutable branch between MFD, CROS and Watchdog due for the v6.9 merge window
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2 1/2] soc: samsung: exynos-pmu: Add regmap support for SoCs that protect PMU regs
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH] dt-bindings: watchdog: renesas-wdt: Add support for R-Car V4M
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH v2 1/2] soc: samsung: exynos-pmu: Add regmap support for SoCs that protect PMU regs
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH v2 02/11] watchdog: rzg2l_wdt: Select PM
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2 04/11] watchdog: rzg2l_wdt: Check return status of pm_runtime_put()
  • From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
• RE: [PATCH v2 04/11] watchdog: rzg2l_wdt: Check return status of pm_runtime_put()
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v2 04/11] watchdog: rzg2l_wdt: Check return status of pm_runtime_put()
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 04/11] watchdog: rzg2l_wdt: Check return status of pm_runtime_put()
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 04/11] watchdog: rzg2l_wdt: Check return status of pm_runtime_put()
  • From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
• RE: [PATCH v6 0/8] Convert DA906{1,2} bindings to json-schema
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• RE: [PATCH v2 04/11] watchdog: rzg2l_wdt: Check return status of pm_runtime_put()
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v2 04/11] watchdog: rzg2l_wdt: Check return status of pm_runtime_put()
  • From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
• RE: [PATCH v2 04/11] watchdog: rzg2l_wdt: Check return status of pm_runtime_put()
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v2 09/11] dt-bindings: watchdog: renesas,wdt: Document RZ/G3S support
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v6 RESEND 0/6] Convert DA906{1,2} bindings to json-schema
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v2 10/11] arm64: dts: renesas: r9a08g045: Add watchdog node
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v2 11/11] arm64: dts: renesas: rzg3s-smarc-som: Enable the watchdog interface
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v2 08/11] watchdog: rzg2l_wdt: Add suspend/resume support
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v2 06/11] watchdog: rzg2l_wdt: Remove comparison with zero
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v2 07/11] watchdog: rzg2l_wdt: Rely on the reset driver for doing proper reset
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v2 05/11] watchdog: rzg2l_wdt: Remove reset de-assert on probe/stop
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v2 04/11] watchdog: rzg2l_wdt: Check return status of pm_runtime_put()
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v2 03/11] watchdog: rzg2l_wdt: Use pm_runtime_resume_and_get()
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v2 02/11] watchdog: rzg2l_wdt: Select PM
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v2 01/11] clk: renesas: r9a08g045: Add clock and reset support for watchdog
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v2 00/11] watchdog: rzg2l_wdt: Add support for RZ/G3S
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• Re: [PATCH v6 0/8] Convert DA906{1,2} bindings to json-schema
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] watchdog: qcom: Start the watchdog in probe
  • From: Pavan Kondeti <quic_pkondeti@xxxxxxxxxxx>
• Re: [PATCH] watchdog: qcom: Start the watchdog in probe
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: qcom: Start the watchdog in probe
  • From: Pavan Kondeti <quic_pkondeti@xxxxxxxxxxx>
• Re: [PATCH] watchdog: qcom: Start the watchdog in probe
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: qcom: Start the watchdog in probe
  • From: Pavankumar Kondeti <quic_pkondeti@xxxxxxxxxxx>
• Re: [PATCH 3/9] watchdog: s3c2410_wdt: update to use new exynos_pmu_*() apis
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 10/10] arm64: dts: renesas: rzg3s-smarc-som: Enable the watchdog interface
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 09/10] arm64: dts: renesas: r9a08g045: Add watchdog node
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 08/10] dt-bindings: watchdog: renesas,wdt: Document RZ/G3S support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 02/10] watchdog: rzg2l_wdt: Use pm_runtime_resume_and_get()
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 01/10] clk: renesas: r9a08g045: Add clock and reset support for watchdog
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] soc: samsung: exynos-pmu: Add regmap support for SoCs that protect PMU regs
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 2/2] watchdog: s3c2410_wdt: use exynos_get_pmu_regmap_by_phandle() for PMU regs
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH v2 1/2] soc: samsung: exynos-pmu: Add regmap support for SoCs that protect PMU regs
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH v2 1/2] soc: samsung: exynos-pmu: Add regmap support for SoCs that protect PMU regs
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH] watchdog: starfive: check watchdog status before enabling in system resume
  • From: Ji Sheng Teoh <jisheng.teoh@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] soc: samsung: exynos-pmu: Add regmap support for SoCs that protect PMU regs
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: starfive: check watchdog status before enabling in system resume
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] watchdog: s3c2410_wdt: use exynos_get_pmu_regmap_by_phandle() for PMU regs
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: [PATCH v2 1/2] soc: samsung: exynos-pmu: Add regmap support for SoCs that protect PMU regs
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: [PATCH v2 2/2] watchdog: s3c2410_wdt: use exynos_get_pmu_regmap_by_phandle() for PMU regs
  • From: Saravana Kannan <saravanak@xxxxxxxxxx>
• [PATCH v2 2/2] watchdog: s3c2410_wdt: use exynos_get_pmu_regmap_by_phandle() for PMU regs
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v2 1/2] soc: samsung: exynos-pmu: Add regmap support for SoCs that protect PMU regs
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v2 0/2] Add regmap support to exynos-pmu for protected PMU regs
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• RE: [PATCH v6 0/8] Convert DA906{1,2} bindings to json-schema
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v4 1/3] platform/chrome: Update binary interface for EC-based watchdog
  • From: Tzung-Bi Shih <tzungbi@xxxxxxxxxx>
• Re: [PATCH v4 1/3] platform/chrome: Update binary interface for EC-based watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4 2/3] watchdog: Add ChromeOS EC-based watchdog driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/9] soc: samsung: exynos-pmu: Add exynos_pmu_update/read/write APIs and SoC quirks
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 2/9] soc: samsung: exynos-pmu: Add exynos_pmu_update/read/write APIs and SoC quirks
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 3/9] watchdog: s3c2410_wdt: update to use new exynos_pmu_*() apis
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v4 2/3] watchdog: Add ChromeOS EC-based watchdog driver
  • From: Lukasz Majczak <lma@xxxxxxxxxxxx>
• [PATCH v4 1/3] platform/chrome: Update binary interface for EC-based watchdog
  • From: Lukasz Majczak <lma@xxxxxxxxxxxx>
• [PATCH v4 0/3] Introduce EC-based watchdog
  • From: Lukasz Majczak <lma@xxxxxxxxxxxx>
• Re: (subset) [PATCH v3 3/3] mfd: cros_ec: Register EC-based watchdog subdevice
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 3/9] watchdog: s3c2410_wdt: update to use new exynos_pmu_*() apis
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 3/9] watchdog: s3c2410_wdt: update to use new exynos_pmu_*() apis
  • From: Saravana Kannan <saravanak@xxxxxxxxxx>
• Re: [PATCH 3/9] watchdog: s3c2410_wdt: update to use new exynos_pmu_*() apis
  • From: Saravana Kannan <saravanak@xxxxxxxxxx>
• Re: (subset) [PATCH v3 3/3] mfd: cros_ec: Register EC-based watchdog subdevice
  • From: Łukasz Majczak <lma@xxxxxxxxxxxx>