Convert txt binding of TI's DaVinci timer to dtschema to allow for validation. While at it, change the file name to match the compatible. Signed-off-by: Kousik Sanagavarapu <five231003@xxxxxxxxx> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> --- .../bindings/timer/ti,da830-timer.yaml | 68 +++++++++++++++++++ .../bindings/timer/ti,davinci-timer.txt | 37 ---------- 2 files changed, 68 insertions(+), 37 deletions(-) create mode 100644 Documentation/devicetree/bindings/timer/ti,da830-timer.yaml delete mode 100644 Documentation/devicetree/bindings/timer/ti,davinci-timer.txt diff --git a/Documentation/devicetree/bindings/timer/ti,da830-timer.yaml b/Documentation/devicetree/bindings/timer/ti,da830-timer.yaml new file mode 100644 index 000000000000..e9646f4e86cc --- /dev/null +++ b/Documentation/devicetree/bindings/timer/ti,da830-timer.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/ti,da830-timer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI DaVinci Timer + +maintainers: + - Kousik Sanagavarapu <five231003@xxxxxxxxx> + +description: | + This is a 64-bit timer found on TI's DaVinci architecture devices. The timer + can be configured as a general-purpose 64-bit timer, dual general-purpose + 32-bit timers. When configured as dual 32-bit timers, each half can operate + in conjunction (chain mode) or independently (unchained mode) of each other. + + The timer is a free running up-counter and can generate interrupts when the + counter reaches preset counter values. + +properties: + compatible: + const: ti,da830-timer + + reg: + maxItems: 1 + + interrupts: + minItems: 2 + maxItems: 10 + + interrupt-names: + minItems: 2 + items: + - const: tint12 + - const: tint34 + - const: cmpint0 + - const: cmpint1 + - const: cmpint2 + - const: cmpint3 + - const: cmpint4 + - const: cmpint5 + - const: cmpint6 + - const: cmpint7 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + +additionalProperties: false + +examples: + - | + timer@20000 { + compatible = "ti,da830-timer"; + reg = <0x20000 0x1000>; + interrupts = <21>, <22>; + interrupt-names = "tint12", "tint34"; + clocks = <&pll0_auxclk>; + }; + +... diff --git a/Documentation/devicetree/bindings/timer/ti,davinci-timer.txt b/Documentation/devicetree/bindings/timer/ti,davinci-timer.txt deleted file mode 100644 index 29bf91ccf5b7..000000000000 --- a/Documentation/devicetree/bindings/timer/ti,davinci-timer.txt +++ /dev/null @@ -1,37 +0,0 @@ -* Device tree bindings for Texas Instruments DaVinci timer - -This document provides bindings for the 64-bit timer in the DaVinci -architecture devices. The timer can be configured as a general-purpose 64-bit -timer, dual general-purpose 32-bit timers. When configured as dual 32-bit -timers, each half can operate in conjunction (chain mode) or independently -(unchained mode) of each other. - -The timer is a free running up-counter and can generate interrupts when the -counter reaches preset counter values. - -Also see ../watchdog/davinci-wdt.txt for timers that are configurable as -watchdog timers. - -Required properties: - -- compatible : should be "ti,da830-timer". -- reg : specifies base physical address and count of the registers. -- interrupts : interrupts generated by the timer. -- interrupt-names: should be "tint12", "tint34", "cmpint0", "cmpint1", - "cmpint2", "cmpint3", "cmpint4", "cmpint5", "cmpint6", - "cmpint7" ("cmpintX" may be omitted if not present in the - hardware). -- clocks : the clock feeding the timer clock. - -Example: - - clocksource: timer@20000 { - compatible = "ti,da830-timer"; - reg = <0x20000 0x1000>; - interrupts = <21>, <22>, <74>, <75>, <76>, <77>, <78>, <79>, - <80>, <81>; - interrupt-names = "tint12", "tint34", "cmpint0", "cmpint1", - "cmpint2", "cmpint3", "cmpint4", "cmpint5", - "cmpint6", "cmpint7"; - clocks = <&pll0_auxclk>; - }; -- 2.45.2.827.g557ae147e6.dirty
