Linux Samsung SOC

• Thread Index

• [PATCH 03/11] drm/exynos: remove unused .remove() and .check_mode() ops from display
  • From: Gustavo Padovan <gustavo@xxxxxxxxxxx>
• [PATCH 02/11] drm/exynos: remove wrappers for phy_power_{on,off}
  • From: Gustavo Padovan <gustavo@xxxxxxxxxxx>
• [PATCH 01/11] drm/exynos: split display's .dpms() into .enable() and .disable()
  • From: Gustavo Padovan <gustavo@xxxxxxxxxxx>
• [PATCH 00/11] drm/exynos: remove exynos_drm_display and exynos_drm_encoder
  • From: Gustavo Padovan <gustavo@xxxxxxxxxxx>
• Re: [PATCH 1/2] mfd: s2mps11: Add manual shutdown method for Odroid XU3
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• Re: [PATCH v3 5/5] cpufreq: remove no longer needed CPU_FREQ_BOOST_SW config option
  • From: "Pandruvada, Srinivas" <srinivas.pandruvada@xxxxxxxxx>
• Re: [PATCH v3 3/5] ARM: Exynos: switch to using generic cpufreq driver for Exynos4x12
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• Re: [PATCH v3 3/5] ARM: Exynos: switch to using generic cpufreq driver for Exynos4x12
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v3 3/5] ARM: Exynos: switch to using generic cpufreq driver for Exynos4x12
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• [PATCH 0/2] mfd/EXYNOS: Properly shutdown Odroid XU3
  • From: Krzysztof Kozlowski <k.kozlowski.k@xxxxxxxxx>
• [PATCH 1/2] mfd: s2mps11: Add manual shutdown method for Odroid XU3
  • From: Krzysztof Kozlowski <k.kozlowski.k@xxxxxxxxx>
• [PATCH 2/2] ARM: dts: Fix power off method on exynos5422-odroidxu3
  • From: Krzysztof Kozlowski <k.kozlowski.k@xxxxxxxxx>
• Re: [PATCH v3 3/5] ARM: Exynos: switch to using generic cpufreq driver for Exynos4x12
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v3 3/5] ARM: Exynos: switch to using generic cpufreq driver for Exynos4x12
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• Re: [PATCH v3 3/5] ARM: Exynos: switch to using generic cpufreq driver for Exynos4x12
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v3 3/5] ARM: Exynos: switch to using generic cpufreq driver for Exynos4x12
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• Re: [PATCH v3 3/5] ARM: Exynos: switch to using generic cpufreq driver for Exynos4x12
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• Re: [PATCH v3 3/5] ARM: Exynos: switch to using generic cpufreq driver for Exynos4x12
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v3 3/5] ARM: Exynos: switch to using generic cpufreq driver for Exynos4x12
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• Re: [PATCH v2] drm/exynos: clear channels only when iommu is enabled
  • From: Inki Dae <inki.dae@xxxxxxxxxxx>
• Re: [PATCH v3 1/9] drm/exynos: pass the correct pipe number
  • From: Inki Dae <inki.dae@xxxxxxxxxxx>
• Re: [PATCH] PM / devfreq: event: Remove incorrect property in exynos-ppmu DT binding
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: Re: [PATCH] PM / devfreq: event: Remove incorrect property in exynos-ppmu DT binding
  • From: MyungJoo Ham <myungjoo.ham@xxxxxxxxxxx>
• Re: [PATCH V2] i2c: s3c2410: remove unused variable
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3 3/5] ARM: Exynos: switch to using generic cpufreq driver for Exynos4x12
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v3 5/5] cpufreq: remove no longer needed CPU_FREQ_BOOST_SW config option
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v3 4/5] cpufreq: exynos: remove Exynos4x12 specific cpufreq driver support
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v3 2/5] ARM: dts: Exynos4x12: add CPU OPP and regulator supply property
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v3 3/5] ARM: Exynos: switch to using generic cpufreq driver for Exynos4x12
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v4] ARM: dts: exynos5422-odroidxu3: Hook up PWM and use it for LEDs
  • From: Peter Chubb <peter.chubb@xxxxxxxxxxxx>
• Re: [PATCH v2 2/7] cpufreq: opp: fix handling of turbo modes
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• [PATCH v3 0/5] cpufreq: use generic cpufreq drivers for Exynos4x12 platform
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• [PATCH v3 1/5] clk: samsung: exynos4x12: add cpu clock configuration data and instantiate cpu clock
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• [PATCH v3 4/5] cpufreq: exynos: remove Exynos4x12 specific cpufreq driver support
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• [PATCH v3 5/5] cpufreq: remove no longer needed CPU_FREQ_BOOST_SW config option
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• [PATCH v3 3/5] ARM: Exynos: switch to using generic cpufreq driver for Exynos4x12
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• [PATCH v3 2/5] ARM: dts: Exynos4x12: add CPU OPP and regulator supply property
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• Re: [PATCH] PM / devfreq: event: Remove incorrect property in exynos-ppmu DT binding
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] ARM: EXYNOS: fix double of_node_put() on error path
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] ARM: EXYNOS: pd: fix potentian kfree() of ro memory
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v2] drm/exynos: clear channels only when iommu is enabled
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH v2 2/2] ARM: EXYNOS: fix double of_node_put() on error path
  • From: Vladimir Zapolskiy <vz@xxxxxxxxx>
• [PATCH v2 1/2] ARM: EXYNOS: pd: fix potentian kfree() of ro memory
  • From: Vladimir Zapolskiy <vz@xxxxxxxxx>
• [PATCH v2 0/2] pd: fix resource deallocation on error path
  • From: Vladimir Zapolskiy <vz@xxxxxxxxx>
• Re: [PATCH v4] ARM: dts: exynos5422-odroidxu3: Hook up PWM and use it for LEDs
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• Re: [PATCH v2 2/7] cpufreq: opp: fix handling of turbo modes
  • From: Kukjin Kim <kgene@xxxxxxxxxx>
• Re: [RFC PATCH 0/3] clocksource: exynos_mct: allow mct to use 64-bit counter from coprocessor
  • From: Kukjin Kim <kgene@xxxxxxxxxx>
• Re: [PATCH] ARM: dts: Add CPU cooling binding for Exynos3250-based Rinato/Monk board
  • From: Kukjin Kim <kgene@xxxxxxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Michal Suchanek <hramrach@xxxxxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [RFC PATCH 2/2] dt: spi: s3c64xx: add compatible to controller-data
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC PATCH 2/2] dt: spi: s3c64xx: add compatible to controller-data
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v3 1/4] mfd: max77686: Don't suggest in binding to use a deprecated property
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH v3 2/4] mfd: max77686: Use a generic name for the PMIC node in the example
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH v3 3/4] mfd: Add DT binding for Maxim MAX77802 IC
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH v3 4/4] mfd: max77686: Split out regulator part from the DT binding
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH v3 0/4] mfd: Improve DT binding docs for max77686 and max77802
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH 2/2] dt: spi: s3c64xx: add compatible to controller-data
  • From: Michal Suchanek <hramrach@xxxxxxxxx>
• Re: [RFC PATCH 2/2] dt: spi: s3c64xx: add compatible to controller-data
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/9] drm/exynos: pass the correct pipe number
  • From: Inki Dae <inki.dae@xxxxxxxxxxx>
• Re: [PATCH] ARM: EXYNOS: pd: fix resource deallocation on error path
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH] ARM: EXYNOS: pd: fix resource deallocation on error path
  • From: Vladimir Zapolskiy <vz@xxxxxxxxx>
• Re: [PATCH] ARM: EXYNOS: pd: fix resource deallocation on error path
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH] ARM: EXYNOS: pd: fix resource deallocation on error path
  • From: Vladimir Zapolskiy <vz@xxxxxxxxx>
• Re: [PATCH] ARM: EXYNOS: pd: fix resource deallocation on error path
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH] ARM: EXYNOS: pd: fix resource deallocation on error path
  • From: Vladimir Zapolskiy <vz@xxxxxxxxx>
• Re: [PATCH v3 1/9] drm/exynos: pass the correct pipe number
  • From: Gustavo Padovan <gustavo@xxxxxxxxxxx>
• Re: [RFC PATCH 2/2] dt: spi: s3c64xx: add compatible to controller-data
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC PATCH 2/2] dt: spi: s3c64xx: add compatible to controller-data
  • From: Michal Suchanek <hramrach@xxxxxxxxx>
• Re: [RFC PATCH 2/2] dt: spi: s3c64xx: add compatible to controller-data
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC PATCH 2/2] dt: spi: s3c64xx: add compatible to controller-data
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• Re: [RFC PATCH 2/2] dt: spi: s3c64xx: add compatible to controller-data
  • From: Michal Suchanek <hramrach@xxxxxxxxx>
• Re: [RFC PATCH 2/2] dt: spi: s3c64xx: add compatible to controller-data
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] ARM: dts: Add CPU cooling binding for Exynos3250-based Rinato/Monk board
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• RE: [PATCHv6] ARM: dts: add exynos5422-cpus.dtsi to correct cpu order
  • From: Kukjin Kim <kgene@xxxxxxxxxx>
• RE: [PATCH v3] ARM: dts: Add SPI CS on exynos5250-snow
  • From: Kukjin Kim <kgene@xxxxxxxxxx>
• RE: [PATCH 01/12] ARM: SAMSUNG: local regs-srom header in mach-exynos
  • From: Kukjin Kim <kgene@xxxxxxxxxx>
• Re: [RFC PATCH 0/3] clocksource: exynos_mct: allow mct to use 64-bit counter from coprocessor
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v2] clk: exynos4: Fix wrong clock for Exynos4x12 ADC
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [RFC PATCH 0/3] clocksource: exynos_mct: allow mct to use 64-bit counter from coprocessor
  • From: Alexey Klimov <klimov.linux@xxxxxxxxx>
• Re: [RFC PATCH 0/3] clocksource: exynos_mct: allow mct to use 64-bit counter from coprocessor
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] spi: s3c64xx: add more debug prints.
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC PATCH 0/3] clocksource: exynos_mct: allow mct to use 64-bit counter from coprocessor
  • From: Alexey Klimov <klimov.linux@xxxxxxxxx>
• Re: [RFC PATCH 0/3] clocksource: exynos_mct: allow mct to use 64-bit counter from coprocessor
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [RFC PATCH 1/3] clocksource: exynos_mct: allow mct to read counter from coprocessor
  • From: Alexey Klimov <klimov.linux@xxxxxxxxx>
• Re: [RFC PATCH 3/3] ARM: dts: add MCT property use-cp15-phys-counter for exynos5422-odroidxu3
  • From: Alexey Klimov <klimov.linux@xxxxxxxxx>
• Re: [PATCH v3] ARM: kill off set_irq_flags usage
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCH] MAINTAINERS: pinctrl: Move Thomas Abraham to CREDITS
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v3] pinctrl: kill off set_irq_flags usage
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v3] irqchip: kill off set_irq_flags usage
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
• [PATCH] MAINTAINERS: pinctrl: Move Thomas Abraham to CREDITS
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [RFC PATCH 1/3] clocksource: exynos_mct: allow mct to read counter from coprocessor
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [RFC PATCH 3/3] ARM: dts: add MCT property use-cp15-phys-counter for exynos5422-odroidxu3
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 01/12] ARM: SAMSUNG: local regs-srom header in mach-exynos
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v2] ARM: dts: Add SPI CS on exynos5250-snow
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC PATCH 3/3] ARM: dts: add MCT property use-cp15-phys-counter for exynos5422-odroidxu3
  • From: Alexey Klimov <klimov.linux@xxxxxxxxx>
• [RFC PATCH 2/3] documentation: dt: mct: add desc of optional property use-cp15-phys-counter
  • From: Alexey Klimov <klimov.linux@xxxxxxxxx>
• [RFC PATCH 1/3] clocksource: exynos_mct: allow mct to read counter from coprocessor
  • From: Alexey Klimov <klimov.linux@xxxxxxxxx>
• [RFC PATCH 0/3] clocksource: exynos_mct: allow mct to use 64-bit counter from coprocessor
  • From: Alexey Klimov <klimov.linux@xxxxxxxxx>
• Re: [PATCH v2] ARM: dts: Add SPI CS on exynos5250-snow
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• [PATCH v3] pinctrl: kill off set_irq_flags usage
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v3] irqchip: kill off set_irq_flags usage
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v3] ARM: kill off set_irq_flags usage
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Michal Suchanek <hramrach@xxxxxxxxx>
• Re: [PATCH v2 06/13] irqchip: kill off set_irq_flags usage
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH 12/12] ARM: SAMSUNG: remove keypad-core header in plat-samsung
  • From: Kukjin Kim <kgene@xxxxxxxxxx>
• [PATCH 11/12] ARM: SAMSUNG: local watchdog-reset header in mach-s3c64xx
  • From: Kukjin Kim <kgene@xxxxxxxxxx>
• [PATCH 10/12] ARM: SAMSUNG: local onenand-core header in mach-s3c64xx
  • From: Kukjin Kim <kgene@xxxxxxxxxx>
• [PATCH 09/12] ARM: SAMSUNG: local keypad header in mach-s3c64xx
  • From: Kukjin Kim <kgene@xxxxxxxxxx>
• [PATCH 08/12] ARM: SAMSUNG: local irq-uart header in mach-s3c64xx
  • From: Kukjin Kim <kgene@xxxxxxxxxx>
• [PATCH 07/12] ARM: SAMSUNG: local backlight header in mach-s3c64xx
  • From: Kukjin Kim <kgene@xxxxxxxxxx>
• [PATCH 06/12] ARM: SAMSUNG: local ata-core header in mach-s3c64xx
  • From: Kukjin Kim <kgene@xxxxxxxxxx>
• [PATCH 05/12] ARM: SAMSUNG: local regs-usb-hsotg-phy header in mach-s3c64xx
  • From: Kukjin Kim <kgene@xxxxxxxxxx>
• [PATCH 04/12] ARM: SAMSUNG: local spi-core header in mach-s3c24xx
  • From: Kukjin Kim <kgene@xxxxxxxxxx>
• [PATCH 03/12] ARM: SAMSUNG: local nand-core header in mach-s3c24xx
  • From: Kukjin Kim <kgene@xxxxxxxxxx>
• [PATCH 02/12] ARM: SAMSUNG: local fb-core header in mach-s3c24xx
  • From: Kukjin Kim <kgene@xxxxxxxxxx>
• [PATCH 01/12] ARM: SAMSUNG: local regs-srom header in mach-exynos
  • From: Kukjin Kim <kgene@xxxxxxxxxx>
• Re: [PATCH v2 3/7] cpufreq-dt: add turbo modes support
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v2 3/7] cpufreq-dt: add turbo modes support
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• Re: [PATCH v2 2/7] cpufreq: opp: fix handling of turbo modes
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• Re: [PATCH v2 2/7] cpufreq: opp: fix handling of turbo modes
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v2 3/7] cpufreq-dt: add turbo modes support
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v2 2/7] cpufreq: opp: fix handling of turbo modes
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• Re: [PATCH v2 3/7] cpufreq-dt: add turbo modes support
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• Re: [PATCH v2 1/4] mfd: max77686: Don't suggest in binding to use a deprecated property
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/7] cpufreq: opp: fix handling of turbo modes
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v2 1/4] mfd: max77686: Don't suggest in binding to use a deprecated property
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 1/4] mfd: max77686: Don't suggest in binding to use a deprecated property
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/7] cpufreq: opp: fix handling of turbo modes
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Michal Suchanek <hramrach@xxxxxxxxx>
• Re: [PATCH v2 3/7] cpufreq-dt: add turbo modes support
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v2 2/7] cpufreq: opp: fix handling of turbo modes
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v2 1/7] opp: add dev_pm_opp_get_turbo_mode_setting() helper
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v2 1/2] PM / devfreq: exynos-ppmu: Add the support of PPMUv2 for Exynos5433
  • From: MyungJoo Ham <myungjoo.ham@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] PM / devfreq: exynos-ppmu: Update documentation to support PPMUv2
  • From: MyungJoo Ham <myungjoo.ham@xxxxxxxxxxx>
• Re: [PATCH v2] clk: exynos4: Fix wrong clock for Exynos4x12 ADC
  • From: Sylwester Nawrocki <sylvester.nawrocki@xxxxxxxxx>
• Re: [PATCH v6 0/3] cpufreq: Use cpufreq-dt driver for Exynos3250
  • From: Chanwoo Choi <cwchoi00@xxxxxxxxx>
• Re: [PATCH v2 06/13] irqchip: kill off set_irq_flags usage
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] clk: exynos4: Fix wrong clock for Exynos4x12 ADC
  • From: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
• Re: [PATCH v2] thermal: consistently use int for temperatures
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH 3/3] ARM: SAMSUNG: make local s5p-dev-mfc in mach-exynos
  • From: Kukjin Kim <kgene@xxxxxxxxxx>
• [PATCH 2/3] ARM: SAMSUNG: make local dev-backlight in mach-s3c64xx
  • From: Kukjin Kim <kgene@xxxxxxxxxx>
• [[PATCH 1/3] ARM: SAMSUNG: make local setup-camif in mach-s3c24xx
  • From: Kukjin Kim <kgene@xxxxxxxxxx>
• RE: [PATCH v6 0/3] cpufreq: Use cpufreq-dt driver for Exynos3250
  • From: Kukjin Kim <kgene@xxxxxxxxxx>
• RE: [GIT PULL] ARM: defconfig: Improvements for 4.3
  • From: Kukjin Kim <kgene@xxxxxxxxxx>
• RE: [PATCH 2/9] ARM: multi_v7_defconfig: Enable max77802 regulator, rtc and clock drivers
  • From: Kukjin Kim <kgene@xxxxxxxxxx>
• RE: [GIT PULL] Non-critical fixes for v4.3
  • From: Kukjin Kim <kgene@xxxxxxxxxx>
• Re: [PATCH v2] thermal: consistently use int for temperatures
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2] thermal: consistently use int for temperatures
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] clk: s2mps11: Use kcalloc instead of kzalloc for array allocation
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH v6 0/3] cpufreq: Use cpufreq-dt driver for Exynos3250
  • From: Michael Turquette <mturquette@xxxxxxxxxxxx>
• Re: [PATCH v2] thermal: consistently use int for temperatures
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [GIT PULL] Non-critical fixes for v4.3
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Michal Suchanek <hramrach@xxxxxxxxx>
• Re: [GIT PULL] Non-critical fixes for v4.3
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Marek Vasut <marex@xxxxxxx>
• Re: Linux-next, Exynos Octa boot fail, bisected to: "drm/exynos: remove drm_iommu_attach_device_if_possible"
  • From: Inki Dae <inki.dae@xxxxxxxxxxx>
• [GIT PULL] Non-critical fixes for v4.3
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [GIT PULL] ARM: defconfig: Improvements for 4.3
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v2] thermal: consistently use int for temperatures
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v6 0/3] cpufreq: Use cpufreq-dt driver for Exynos3250
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH v3] thermal: consistently use int for temperatures
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/4] PCI: exynos: Mark the msi cascade handler IRQF_NO_THREAD
  • From: Kevin Hao <haokexin@xxxxxxxxx>
• [PATCH v2 0/2] PM / devfreq: exynos-ppmu: Add the support of PPMUv2
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• [PATCH v2 2/2] PM / devfreq: exynos-ppmu: Update documentation to support PPMUv2
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• [PATCH v2 1/2] PM / devfreq: exynos-ppmu: Add the support of PPMUv2 for Exynos5433
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• Re: [PATCH v6 0/3] cpufreq: Use cpufreq-dt driver for Exynos3250
  • From: Kukjin Kim <kgene@xxxxxxxxxx>
• Re: [PATCH v6 1/3] clk: samsung: exynos3250: Add cpu clock configuration data and instaniate cpu clock
  • From: Kukjin Kim <kgene@xxxxxxxxxx>
• Re: [PATCH v3 1/4] clk: samsung: exynos5250: add cpu clock configuration data and instantiate cpu clock
  • From: Kukjin Kim <kgene@xxxxxxxxxx>
• Re: [PATCH v6 0/3] cpufreq: Use cpufreq-dt driver for Exynos3250
  • From: Kukjin Kim <kgene@xxxxxxxxxx>
• RE: [PATCH v2] thermal: consistently use int for temperatures
  • From: "Zhang, Rui" <rui.zhang@xxxxxxxxx>
• Re: [PATCH v3 1/4] clk: samsung: exynos5250: add cpu clock configuration data and instantiate cpu clock
  • From: Michael Turquette <mturquette@xxxxxxxxxxxx>
• RE: [PATCH v6 0/3] cpufreq: Use cpufreq-dt driver for Exynos3250
  • From: Michael Turquette <mturquette@xxxxxxxxxxxx>
• Re: [PATCH v2 00/19] Update ALSA, and au0828 drivers to use Managed Media Controller API
  • From: Shuah Khan <shuahkh@xxxxxxxxxxxxxxx>
• Re: [PATCHv7 14/15] cec: s5p-cec: Add s5p-cec driver
  • From: Hans Verkuil <hansverk@xxxxxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Michal Suchanek <hramrach@xxxxxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Michal Suchanek <hramrach@xxxxxxxxx>
• Re: [PATCHv7 14/15] cec: s5p-cec: Add s5p-cec driver
  • From: Kamil Debski <kamil@xxxxxxxxx>
• Re: [PATCH v2 3/4] mfd: Add DT binding for Maxim MAX77802 IC
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/4] mfd: Add DT binding for Maxim MAX77802 IC
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 2/2] MAINTAINERS: add an entry for the Maxim MAX77802 PMIC drivers
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 1/2] PM / devfreq: exynos-ppmu: Add the support of PPMUv2 for Exynos5433
  • From: Chanwoo Choi <cwchoi00@xxxxxxxxx>
• Re: [PATCH 1/2] PM / devfreq: exynos-ppmu: Add the support of PPMUv2 for Exynos5433
  • From: Chanwoo Choi <cwchoi00@xxxxxxxxx>
• Re: [PATCH 1/2] MAINTAINERS: add Device Tree binding doc for max77686 regulator
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2] thermal: consistently use int for temperatures
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v2] thermal: consistently use int for temperatures
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] PM / devfreq: exynos-ppmu: Add the support of PPMUv2 for Exynos5433
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH] PM / devfreq: event: Remove incorrect property in exynos-ppmu DT binding
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH] PM / devfreq: event: Remove incorrect property in exynos-ppmu DT binding
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• Re: [GIT PULL] ARM: EXYNOS: mach: Improvements for 4.3
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 1/2] PM / devfreq: exynos-ppmu: Add the support of PPMUv2 for Exynos5433
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• RE: [GIT PULL] Samsung 1st fixes for v4.2
  • From: Kukjin Kim <kgene@xxxxxxxxxx>
• RE: [GIT PULL] ARM: EXYNOS: mach: Improvements for 4.3
  • From: Kukjin Kim <kgene@xxxxxxxxxx>
• Re: [PATCH 2/2] PM / devfreq: exynos-ppmu: Update documentation to support PPMUv2
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• Re: [PATCH 2/2] PM / devfreq: exynos-ppmu: Update documentation to support PPMUv2
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• RE: [GIT PULL] ARM: EXYNOS: mach: Improvements for 4.3
  • From: Kukjin Kim <kgene@xxxxxxxxxx>
• Re: [PATCH 2/2] PM / devfreq: exynos-ppmu: Update documentation to support PPMUv2
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• Re: [PATCH 2/2] PM / devfreq: exynos-ppmu: Update documentation to support PPMUv2
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 1/2] PM / devfreq: exynos-ppmu: Add the support of PPMUv2 for Exynos5433
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH 1/2] PM / devfreq: exynos-ppmu: Add the support of PPMUv2 for Exynos5433
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• [PATCH 2/2] PM / devfreq: exynos-ppmu: Update documentation to support PPMUv2
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• [PATCH 0/2] PM / devfreq: exynos-ppmu: Add the support of PPMUv2
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• Re: [PATCH] clk: s2mps11: Use kcalloc instead of kzalloc for array allocation
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [linux-next:master 3331/3796] Error: arch/arm/boot/dts/exynos5250.dtsi:65.21-22 syntax error
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH v2 06/19] media: platform exynos4-is: Update graph_mutex to graph_lock spinlock
  • From: Shuah Khan <shuahkh@xxxxxxxxxxxxxxx>
• [PATCH v2 05/19] media: Convert graph_mutex to a spinlock and call it graph_lock
  • From: Shuah Khan <shuahkh@xxxxxxxxxxxxxxx>
• [PATCH v2 03/19] media: Add ALSA Media Controller devnodes
  • From: Shuah Khan <shuahkh@xxxxxxxxxxxxxxx>
• [PATCH v2 01/19] Revert "[media] media: media controller entity framework enhancements for ALSA"
  • From: Shuah Khan <shuahkh@xxxxxxxxxxxxxxx>
• [PATCH v2 00/19] Update ALSA, and au0828 drivers to use Managed Media Controller API
  • From: Shuah Khan <shuahkh@xxxxxxxxxxxxxxx>
• [PATCH v2 10/19] media: platform xilinx: Update graph_mutex to graph_lock spinlock
  • From: Shuah Khan <shuahkh@xxxxxxxxxxxxxxx>
• [PATCH v2 18/19] media: au0828 change to use Managed Media Controller API
  • From: Shuah Khan <shuahkh@xxxxxxxxxxxxxxx>
• [PATCH v2 17/19] media: dvb-frontend change to check for tuner availability from open
  • From: Shuah Khan <shuahkh@xxxxxxxxxxxxxxx>
• [PATCH v2 16/19] media: Change v4l-core to check for tuner availability
  • From: Shuah Khan <shuahkh@xxxxxxxxxxxxxxx>
• [PATCH v2 15/19] media: v4l-core add v4l_enable_media_tuner() to check for tuner availability
  • From: Shuah Khan <shuahkh@xxxxxxxxxxxxxxx>
• [PATCH v2 13/19] media: Add irq safe Media Controller start/stop pipeline API
  • From: Shuah Khan <shuahkh@xxxxxxxxxxxxxxx>
• [PATCH v2 14/19] media: Add enable_source handler field to struct media_device
  • From: Shuah Khan <shuahkh@xxxxxxxxxxxxxxx>
• [PATCH v2 12/19] staging media: omap4iss: Update graph_mutex to graph_lock spinlock
  • From: Shuah Khan <shuahkh@xxxxxxxxxxxxxxx>
• [PATCH v2 11/19] staging media: davinci_vpfe: Update graph_mutex to graph_lock spinlock
  • From: Shuah Khan <shuahkh@xxxxxxxxxxxxxxx>
• [PATCH v2 08/19] media: platform s3c-camif: Update graph_mutex to graph_lock spinlock
  • From: Shuah Khan <shuahkh@xxxxxxxxxxxxxxx>
• [PATCH v2 04/19] media: au8522 change to create MC pad for ALSA Audio Out
  • From: Shuah Khan <shuahkh@xxxxxxxxxxxxxxx>
• [PATCH v2 19/19] sound/usb: Update ALSA driver to use Managed Media Controller API
  • From: Shuah Khan <shuahkh@xxxxxxxxxxxxxxx>
• [PATCH v2 09/19] media: platform vsp1: Update graph_mutex to graph_lock spinlock
  • From: Shuah Khan <shuahkh@xxxxxxxxxxxxxxx>
• [PATCH v2 07/19] media: platform omap3isp: Update graph_mutex to graph_lock spinlock
  • From: Shuah Khan <shuahkh@xxxxxxxxxxxxxxx>
• [PATCH v2 02/19] media: Media Controller register/unregister entity_notify API
  • From: Shuah Khan <shuahkh@xxxxxxxxxxxxxxx>
• Re: [PATCH] clk: s2mps11: Use kcalloc instead of kzalloc for array allocation
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• Re: Linux-next, Exynos Octa boot fail, bisected to: "drm/exynos: remove drm_iommu_attach_device_if_possible"
  • From: Inki Dae <inki.dae@xxxxxxxxxxx>
• [PATCH] clk: s2mps11: Use kcalloc instead of kzalloc for array allocation
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Marek Vasut <marex@xxxxxxx>
• Re: Linux-next, Exynos Octa boot fail, bisected to: "drm/exynos: remove drm_iommu_attach_device_if_possible"
  • From: Joonyoung Shim <jy0922.shim@xxxxxxxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Michal Suchanek <hramrach@xxxxxxxxx>
• Re: Linux-next, Exynos Octa boot fail, bisected to: "drm/exynos: remove drm_iommu_attach_device_if_possible"
  • From: Inki Dae <inki.dae@xxxxxxxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Michal Suchanek <hramrach@xxxxxxxxx>
• Re: Linux-next, Exynos Octa boot fail, bisected to: "drm/exynos: remove drm_iommu_attach_device_if_possible"
  • From: Joonyoung Shim <jy0922.shim@xxxxxxxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Michal Suchanek <hramrach@xxxxxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Michal Suchanek <hramrach@xxxxxxxxx>
• Re: [PATCH 3/3] mfd: Remove MFD_CROS_EC_SPI depends on OF
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 1/3] platform/chrome: Don't make CHROME_PLATFORMS depends on X86 || ARM
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 2/3] mfd: Remove MFD_CROS_EC depends on X86 || ARM
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: Linux-next, Exynos Octa boot fail, bisected to: "drm/exynos: remove drm_iommu_attach_device_if_possible"
  • From: Inki Dae <inki.dae@xxxxxxxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: Linux-next, Exynos Octa boot fail, bisected to: "drm/exynos: remove drm_iommu_attach_device_if_possible"
  • From: Joonyoung Shim <jy0922.shim@xxxxxxxxxxx>
• Re: [PATCH 2/3] mfd: Remove MFD_CROS_EC depends on X86 || ARM
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCH 1/3] platform/chrome: Don't make CHROME_PLATFORMS depends on X86 || ARM
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCH 2/3] mfd: Remove MFD_CROS_EC depends on X86 || ARM
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCH 2/3] mfd: Remove MFD_CROS_EC depends on X86 || ARM
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• Re: [PATCH 2/3] mfd: Remove MFD_CROS_EC depends on X86 || ARM
  • From: Paul Gortmaker <paul.gortmaker@xxxxxxxxxxxxx>
• Re: [GIT PULL] ARM: EXYNOS: mach: Improvements for 4.3
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v2] clk: exynos4: Fix wrong clock for Exynos4x12 ADC
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v2] clk: exynos4: Fix wrong clock for Exynos4x12 ADC
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [GIT PULL] Samsung 1st fixes for v4.2
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCH 9/9] drm/exynos: Convert g2d_userptr_get_dma_addr() to use get_vaddr_frames()
  • From: Jan Kara <jack@xxxxxxx>
• RE: [PATCH v2] thermal: consistently use int for temperatures
  • From: "Zhang, Rui" <rui.zhang@xxxxxxxxx>
• Linux-next, Exynos Octa boot fail, bisected to: "drm/exynos: remove drm_iommu_attach_device_if_possible"
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCHv7 14/15] cec: s5p-cec: Add s5p-cec driver
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH v2] thermal: consistently use int for temperatures
  • From: Punit Agrawal <punit.agrawal@xxxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Michal Suchanek <hramrach@xxxxxxxxx>
• [PATCH] drivers/irqchip: replace pr_warning by pr_warn
  • From: Wang Long <long.wanglong@xxxxxxxxxx>
• Re: [PATCH] thermal: consistently use int for temperatures
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v2] thermal: consistently use int for temperatures
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [GIT PULL] ARM: EXYNOS: mach: Improvements for 4.3
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [GIT PULL] ARM: EXYNOS: mach: Improvements for 4.3
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• RE: [GIT PULL] ARM: EXYNOS: mach: Improvements for 4.3
  • From: Kukjin Kim <kgene@xxxxxxxxxx>
• RE: [GIT PULL] ARM: EXYNOS: dts: Improvements for 4.3
  • From: Kukjin Kim <kgene@xxxxxxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• [GIT PULL] Samsung 1st fixes for v4.2
  • From: Kukjin Kim <kgene@xxxxxxxxxx>
• Re: [PATCH v2 1/4] mfd: max77686: Don't suggest in binding to use a deprecated property
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/4] mfd: max77686: Don't suggest in binding to use a deprecated property
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2 4/4] mfd: max77686: Split out regulator part from the DT binding
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v6 1/3] clk: samsung: exynos3250: Add cpu clock configuration data and instaniate cpu clock
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Michal Suchanek <hramrach@xxxxxxxxx>
• Re: [PATCH 9/9] drm/exynos: Convert g2d_userptr_get_dma_addr() to use get_vaddr_frames()
  • From: Inki Dae <inki.dae@xxxxxxxxxxx>
• Re: [PATCH 2/9] mm: Provide new get_vaddr_frames() helper
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• [PATCH V2] i2c: s3c2410: remove unused variable
  • From: Laurent Navet <laurent.navet@xxxxxxxxx>
• Re: [PATCH 2/9] ARM: multi_v7_defconfig: Enable max77802 regulator, rtc and clock drivers
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCH 2/9] ARM: multi_v7_defconfig: Enable max77802 regulator, rtc and clock drivers
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• Re: [PATCH 2/9] ARM: multi_v7_defconfig: Enable max77802 regulator, rtc and clock drivers
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCH 0/9 v7] Helper to abstract vma handling in media layer
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH] thermal: consistently use int for temperatures
  • From: Punit Agrawal <punit.agrawal@xxxxxxx>
• Re: [PATCH 9/9] drm/exynos: Convert g2d_userptr_get_dma_addr() to use get_vaddr_frames()
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH 9/9] drm/exynos: Convert g2d_userptr_get_dma_addr() to use get_vaddr_frames()
  • From: Inki Dae <inki.dae@xxxxxxxxxxx>
• Re: [PATCH 2/9] mm: Provide new get_vaddr_frames() helper
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH 9/9] drm/exynos: Convert g2d_userptr_get_dma_addr() to use get_vaddr_frames()
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH 2/2] MAINTAINERS: add an entry for the Maxim MAX77802 PMIC drivers
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 1/2] MAINTAINERS: add Device Tree binding doc for max77686 regulator
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [RFC] ARM: EXYNOS: reset KFC cores when cpu is up
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v2 2/4] mfd: max77686: Use a generic name for the PMIC node in the example
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] mfd: max77686: Use a generic name for the PMIC node in the example
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH 1/2] MAINTAINERS: add Device Tree binding doc for max77686 regulator
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 2/2] MAINTAINERS: add an entry for the Maxim MAX77802 PMIC drivers
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 0/2] MAINTAINERS: update max77686 entry and add one for max77802
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [RFC] ARM: EXYNOS: reset KFC cores when cpu is up
  • From: Sjoerd Simons <sjoerd.simons@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 4/4] mfd: max77686: Split out regulator part from the DT binding
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 4/4] mfd: max77686: Split out regulator part from the DT binding
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v2 4/4] mfd: max77686: Split out regulator part from the DT binding
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [GIT PULL] ARM: defconfig: Improvements for 4.3
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v2 4/4] mfd: max77686: Split out regulator part from the DT binding
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v2 4/4] mfd: max77686: Split out regulator part from the DT binding
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 4/4] mfd: max77686: Split out regulator part from the DT binding
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v2 3/4] mfd: Add DT binding for Maxim MAX77802 IC
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH v2 0/4] mfd: Improve DT binding docs for max77686 and max77802
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH v2 1/4] mfd: max77686: Don't suggest in binding to use a deprecated property
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH v2 2/4] mfd: max77686: Use a generic name for the PMIC node in the example
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH v2 3/4] mfd: Add DT binding for Maxim MAX77802 IC
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH v2 4/4] mfd: max77686: Split out regulator part from the DT binding
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: s3c2410: remove unused variable
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 06/13] irqchip: kill off set_irq_flags usage
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH] i2c: s3c2410: remove unused variable
  • From: Laurent Navet <laurent.navet@xxxxxxxxx>
• Re: [PATCH v2 06/13] irqchip: kill off set_irq_flags usage
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [PATCH v2 00/23] drm/exynos: atomic improvements + exynos_encoder removal
  • From: Gustavo Padovan <gustavo@xxxxxxxxxxx>
• [PATCH v3 9/9] drm/exynos: return return value of exynos_crtc->enable_vblank
  • From: Gustavo Padovan <gustavo@xxxxxxxxxxx>
• [PATCH v3 8/9] drm/exynos: unify exynos_drm_plane names with drm core
  • From: Gustavo Padovan <gustavo@xxxxxxxxxxx>
• [PATCH v3 7/9] drm/exynos: remove unused fields from struct exynos_drm_plane
  • From: Gustavo Padovan <gustavo@xxxxxxxxxxx>
• [PATCH v3 6/9] drm/exynos: use drm atomic state directly
  • From: Gustavo Padovan <gustavo@xxxxxxxxxxx>
• [PATCH v3 5/9] drm/exynos: pass struct exynos_drm_plane in update/enable
  • From: Gustavo Padovan <gustavo@xxxxxxxxxxx>
• [PATCH v3 4/9] drm/exynos: rename win_commit/disable to atomic-like names
  • From: Gustavo Padovan <gustavo@xxxxxxxxxxx>
• [PATCH v3 3/9] drm/exynos: remove duplicated check for suspend
  • From: Gustavo Padovan <gustavo@xxxxxxxxxxx>
• [PATCH v3 2/9] drm/exynos: use KMS version of DRM vblanks functions
  • From: Gustavo Padovan <gustavo@xxxxxxxxxxx>
• [PATCH v3 1/9] drm/exynos: pass the correct pipe number
  • From: Gustavo Padovan <gustavo@xxxxxxxxxxx>
• Re: [PATCH v2 06/13] irqchip: kill off set_irq_flags usage
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCHv7 14/15] cec: s5p-cec: Add s5p-cec driver
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH v2 06/13] irqchip: kill off set_irq_flags usage
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [patch v2 2/2] pinctrl: samsung: remove "out of memory" messages
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [patch v2 1/2] pinctrl: samsung: don't truncate the last char
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v6 1/3] clk: samsung: exynos3250: Add cpu clock configuration data and instaniate cpu clock
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH v2 1/3] ARM: multi_v7_defconfig: Enable max77802 regulator
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH v2 2/3] ARM: multi_v7_defconfig: Enable NTC Thermistors support
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH v2 3/3] ARM: exynos_defconfig: Enable NTC Thermistors support
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH v2 0/3] ARM: Enable NTC Thermistors and max77802 regulator drivers
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] ARM: multi_v7_defconfig: Enable max77802 regulator
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 1/3] ARM: multi_v7_defconfig: Enable max77802 regulator
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/9] ARM: multi_v7_defconfig: Enable max77802 regulator, rtc and clock drivers
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [GIT PULL] ARM: EXYNOS: mach: Improvements for 4.3
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [GIT PULL] ARM: EXYNOS: dts: Improvements for 4.3
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCHv6] ARM: dts: add exynos5422-cpus.dtsi to correct cpu order
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [RFC] ARM: EXYNOS: reset KFC cores when cpu is up
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v3 2/4] ARM: dts: Exynos5250: add CPU OPP and regulator supply property
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [RFC] ARM: EXYNOS: reset KFC cores when cpu is up
  • From: Chanho Park <parkch98@xxxxxxxxx>
• Re: [PATCH v3 2/4] ARM: dts: Exynos5250: add CPU OPP and regulator supply property
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• Re: [PATCH] ARM: multi_v7_defconfig: Remove old Samsung USB PHY configs
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 2/3] ARM: multi_v7_defconfig: Enable NTC Thermistors support
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 3/3] ARM: exynos_defconfig: Enable NTC Thermistors support
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 1/3] ARM: multi_v7_defconfig: Enable max77802 regulator
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 2/9] ARM: multi_v7_defconfig: Enable max77802 regulator, rtc and clock drivers
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [RFC] ARM: EXYNOS: reset KFC cores when cpu is up
  • From: Chanho Park <parkch98@xxxxxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH] ARM: multi_v7_defconfig: Remove old Samsung USB PHY configs
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 1/3] ARM: multi_v7_defconfig: Enable max77802 regulator
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 3/3] ARM: exynos_defconfig: Enable NTC Thermistors support
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 2/3] ARM: multi_v7_defconfig: Enable NTC Thermistors support
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 0/3] ARM: Enable NTC Thermistors and max77802 regulator drivers
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• Re: [PATCH 2/9] ARM: multi_v7_defconfig: Enable max77802 regulator, rtc and clock drivers
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [RFC] ARM: EXYNOS: reset KFC cores when cpu is up
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v3 1/4] clk: samsung: exynos5250: add cpu clock configuration data and instantiate cpu clock
  • From: Sylwester nawrocki <s.nawrocki@xxxxxxxxxxx>
• Re: [PATCH v2 4/7] clk: samsung: exynos4x12: add cpu clock configuration data and instantiate cpu clock
  • From: Sylwester nawrocki <s.nawrocki@xxxxxxxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Michal Suchanek <hramrach@xxxxxxxxx>
• Re: [RFC] ARM: EXYNOS: reset KFC cores when cpu is up
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [RFC] ARM: EXYNOS: reset KFC cores when cpu is up
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• Re: [RFC] ARM: EXYNOS: reset KFC cores when cpu is up
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCHv2] regulator: s2mps11: Added shutdown function to poweroff
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• Re: [RFC] ARM: EXYNOS: reset KFC cores when cpu is up
  • From: Chanho Park <parkch98@xxxxxxxxx>
• Re: [RFC] ARM: EXYNOS: reset KFC cores when cpu is up
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC] ARM: EXYNOS: reset KFC cores when cpu is up
  • From: Chanho Park <parkch98@xxxxxxxxx>
• Re: [PATCHv2] regulator: s2mps11: Added shutdown function to poweroff
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v2 01/13] ARM: kill off set_irq_flags usage
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• [PATCHv2] regulator: s2mps11: Added shutdown function to poweroff
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• Re: [PATCHv6] ARM: dts: add exynos5422-cpus.dtsi to correct cpu order
  • From: Chanho Park <parkch98@xxxxxxxxx>
• RE: [PATCH] ARM: multi_v7_defconfig: Remove old Samsung USB PHY configs
  • From: Kukjin Kim <kgene@xxxxxxxxxx>
• Re: [PATCH] regulator: s2mps11: Added shutdown function to poweroff Odroid-XU3
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• RE: [GIT PULL] ARM: EXYNOS: dts: Fixes for 4.2
  • From: Kukjin Kim <kgene@xxxxxxxxxx>
• Re: [PATCH] regulator: s2mps11: Added shutdown function to poweroff Odroid-XU3
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [GIT PULL] ARM: EXYNOS: dts: Fixes for 4.2
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• RE: [GIT PULL] ARM: EXYNOS: dts: Fixes for 4.2
  • From: Kukjin Kim <kgene@xxxxxxxxxx>
• RE: [PATCHv6] ARM: dts: add exynos5422-cpus.dtsi to correct cpu order
  • From: Kukjin Kim <kgene@xxxxxxxxxx>
• Re: [PATCH v2 00/23] drm/exynos: atomic improvements + exynos_encoder removal
  • From: Joonyoung Shim <jy0922.shim@xxxxxxxxxxx>
• Re: [PATCHv6] ARM: dts: add exynos5422-cpus.dtsi to correct cpu order
  • From: Chanho Park <parkch98@xxxxxxxxx>
• Re: [PATCH 0/7] drm/exynos/hdmi: refactoring/cleanup patches
  • From: Joonyoung Shim <jy0922.shim@xxxxxxxxxxx>
• Re: [PATCHv6] ARM: dts: add exynos5422-cpus.dtsi to correct cpu order
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCHv6] ARM: dts: add exynos5422-cpus.dtsi to correct cpu order
  • From: Mauro Ribeiro <mdrjr0@xxxxxxxxx>
• RE: [PATCHv6] ARM: dts: add exynos5422-cpus.dtsi to correct cpu order
  • From: Kukjin Kim <kgene@xxxxxxxxxx>
• RE: [PATCH] serial: samsung: Remove redundant DEBUG_LL check
  • From: Kukjin Kim <kgene@xxxxxxxxxx>
• Re: [PATCH] serial: samsung: Remove redundant DEBUG_LL check
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCHv6] ARM: dts: add exynos5422-cpus.dtsi to correct cpu order
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCHv6] ARM: dts: add exynos5422-cpus.dtsi to correct cpu order
  • From: Chanho Park <parkch98@xxxxxxxxx>
• Re: [PATCH 4/6] ARM: dts: Exynos4210: add CPU OPP and regulator supply property
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 0/7] drm/exynos/hdmi: refactoring/cleanup patches
  • From: Tobias Jakobi <tjakobi@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 06/13] irqchip: kill off set_irq_flags usage
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] arm:irqchip: IRQCHIP_DECLARE macro is now accessible
  • From: Shawn Guo <shawnguo@xxxxxxxxxx>
• Re: [PATCH 0/9 v7] Helper to abstract vma handling in media layer
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCH 1/9] [media] vb2: Push mmap_sem down to memops
  • From: Jan Kara <jack@xxxxxxxx>
• [PATCH 6/9] media: vb2: Convert vb2_vmalloc_get_userptr() to use frame vector
  • From: Jan Kara <jack@xxxxxxxx>
• [PATCH 2/9] mm: Provide new get_vaddr_frames() helper
  • From: Jan Kara <jack@xxxxxxxx>
• [PATCH 5/9] media: vb2: Convert vb2_dma_sg_get_userptr() to use frame vector
  • From: Jan Kara <jack@xxxxxxxx>
• [PATCH 9/9] drm/exynos: Convert g2d_userptr_get_dma_addr() to use get_vaddr_frames()
  • From: Jan Kara <jack@xxxxxxxx>
• [PATCH 8/9] media: vb2: Remove unused functions
  • From: Jan Kara <jack@xxxxxxxx>
• [PATCH 7/9] media: vb2: Convert vb2_dc_get_userptr() to use frame vector
  • From: Jan Kara <jack@xxxxxxxx>
• [PATCH 4/9] vb2: Provide helpers for mapping virtual addresses
  • From: Jan Kara <jack@xxxxxxxx>
• [PATCH 3/9] media: omap_vout: Convert omap_vout_uservirt_to_phys() to use get_vaddr_pfns()
  • From: Jan Kara <jack@xxxxxxxx>
• [PATCH 0/9 v7] Helper to abstract vma handling in media layer
  • From: Jan Kara <jack@xxxxxxxx>
• Re: [PATCH 4/6] ARM: dts: Exynos4210: add CPU OPP and regulator supply property
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• Re: [PATCH 0/10 v6] Helper to abstract vma handling in media layer
  • From: Jan Kara <jack@xxxxxxx>
• Re: [PATCH 2/3] mfd: Add DT binding for Maxim MAX77802 IC
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] mfd: Add DT binding for Maxim MAX77802 IC
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [GIT PULL] ARM: EXYNOS: dts: Fixes for 4.2
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 4/6] ARM: dts: Exynos4210: add CPU OPP and regulator supply property
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 4/6] ARM: dts: Exynos4210: add CPU OPP and regulator supply property
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• [PATCH] serial: samsung: Remove redundant DEBUG_LL check
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH 4/6] ARM: dts: Exynos4210: add CPU OPP and regulator supply property
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 4/6] ARM: dts: Exynos4210: add CPU OPP and regulator supply property
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• Re: [PATCH 0/7] drm/exynos/hdmi: refactoring/cleanup patches
  • From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
• Re: [PATCH 0/7] drm/exynos/hdmi: refactoring/cleanup patches
  • From: Tobias Jakobi <tjakobi@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/10 v6] Helper to abstract vma handling in media layer
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH 3/3] mfd: max77686: Split out regulator part from the DT binding
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] mfd: Add DT binding for Maxim MAX77802 IC
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] mfd: max77686: Split out regulator part from the DT binding
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 2/3] mfd: Add DT binding for Maxim MAX77802 IC
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 1/3] mfd: max77686: Don't suggest in binding to use a deprecated property
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH 0/3] mfd: Improve DT binding docs for max77686 and max77802
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 1/3] mfd: max77686: Don't suggest in binding to use a deprecated property
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 2/3] mfd: Add DT binding for Maxim MAX77802 IC
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 3/3] mfd: max77686: Split out regulator part from the DT binding
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/7] drm/exynos/hdmi: refactoring/cleanup patches
  • From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
• [PATCH] PM / devfreq: event: Remove incorrect property in exynos-ppmu DT binding
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 01/13] ARM: kill off set_irq_flags usage
  • From: Shawn Guo <shawnguo@xxxxxxxxxx>
• Re: [PATCH v2 06/13] irqchip: kill off set_irq_flags usage
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [PATCH] drm/exynos/fimc: fix runtime pm support
  • From: Tobias Jakobi <tjakobi@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/7] drm/exynos/hdmi: refactoring/cleanup patches
  • From: Tobias Jakobi <tjakobi@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/7] drm/exynos/hdmi: refactoring/cleanup patches
  • From: Tobias Jakobi <liquid.acid@xxxxxxx>
• Re: [PATCH v2 10/13] pinctrl: kill off set_irq_flags usage
  • From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
• [PATCH v2 01/13] ARM: kill off set_irq_flags usage
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 06/13] irqchip: kill off set_irq_flags usage
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 10/13] pinctrl: kill off set_irq_flags usage
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] regulator: s2mps11: Added shutdown function to poweroff Odroid-XU3
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH] regulator: s2mps11: Added shutdown function to poweroff Odroid-XU3
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• Re: [PATCH v2 4/7] clk: samsung: exynos4x12: add cpu clock configuration data and instantiate cpu clock
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH] Documentation: ARM: EXYNOS: Extend boot loader interface documentation
  • From: Jonathan Corbet <corbet@xxxxxxx>
• Re: [PATCH v2 4/7] clk: samsung: exynos4x12: add cpu clock configuration data and instantiate cpu clock
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH] ARM: EXYNOS: Use IOMEM_ERR_PTR when function returns iomem
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v2 7/7] cpufreq: exynos: remove Exynos4x12 specific cpufreq driver support
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v2 6/7] ARM: Exynos: switch to using generic cpufreq driver for Exynos4x12
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v2 5/7] ARM: dts: Exynos4x12: add CPU OPP and regulator supply property
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v2 4/7] clk: samsung: exynos4x12: add cpu clock configuration data and instantiate cpu clock
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v2 3/7] cpufreq-dt: add turbo modes support
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH] mfd: Drop owner assignment from i2c_drivers
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH] mfd: Drop owner assignment from i2c_drivers
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH] Drop owner assignment from i2c_driver (and platform left-overs)
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH] ARM: EXYNOS: pmu: Drop owner assignment
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH] Drop owner assignment from i2c_driver (and platform left-overs)
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v2 2/7] cpufreq: opp: fix handling of turbo modes
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v2 1/7] opp: add dev_pm_opp_get_turbo_mode_setting() helper
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v2 12/23] drm/exynos: don't track enabled state at exynos_crtc
  • From: Joonyoung Shim <jy0922.shim@xxxxxxxxxxx>
• Re: [PATCH v2 0/7] cpufreq: use generic cpufreq drivers for Exynos4x12 platform
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 12/23] drm/exynos: don't track enabled state at exynos_crtc
  • From: Gustavo Padovan <gustavo@xxxxxxxxxxx>
• Re: [PATCH v2] clk: exynos4: Fix wrong clock for Exynos4x12 ADC
  • From: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
• [PATCH v2 5/7] ARM: dts: Exynos4x12: add CPU OPP and regulator supply property
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• [PATCH v2 4/7] clk: samsung: exynos4x12: add cpu clock configuration data and instantiate cpu clock
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• [PATCH v2 6/7] ARM: Exynos: switch to using generic cpufreq driver for Exynos4x12
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• [PATCH v2 7/7] cpufreq: exynos: remove Exynos4x12 specific cpufreq driver support
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• [PATCH v2 3/7] cpufreq-dt: add turbo modes support
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• [PATCH v2 2/7] cpufreq: opp: fix handling of turbo modes
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• [PATCH v2 1/7] opp: add dev_pm_opp_get_turbo_mode_setting() helper
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• [PATCH v2 0/7] cpufreq: use generic cpufreq drivers for Exynos4x12 platform
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• [PATCH 6/7] drm/exynos/hdmi: remove hdmi_v13_conf struct
  • From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
• [PATCH 7/7] drm/exynos/hdmi: remove hdmi_v14_conf struct
  • From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
• [PATCH 5/7] drm/exynos/hdmi: remove redundant configuration fields
  • From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
• [PATCH 4/7] drm/exynos/hdmi: add driver data pointer to private context
  • From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
• [PATCH 1/7] drm/exynos/hdmi: remove old platform data code
  • From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
• [PATCH 3/7] drm/exynos/hdmi: remove private lock code
  • From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
• [PATCH 2/7] drm/exynos/hdmi: Simplify HPD gpio handling
  • From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
• [PATCH 0/7] drm/exynos/hdmi: refactoring/cleanup patches
  • From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
• Re: [PATCH 0/10 v6] Helper to abstract vma handling in media layer
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH 0/10 v6] Helper to abstract vma handling in media layer
  • From: Jan Kara <jack@xxxxxxx>
• Re: [PATCH v3 0/4] cpufreq: use generic cpufreq drivers for Exynos5250 platform
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v2 12/23] drm/exynos: don't track enabled state at exynos_crtc
  • From: Joonyoung Shim <jy0922.shim@xxxxxxxxxxx>
• Re: [PATCH v2] clk: exynos4: Fix wrong clock for Exynos4x12 ADC
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH] ARM: multi_v7_defconfig: Remove old Samsung USB PHY configs
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 2/4] ARM: dts: Extend exynos5250-pinctrl nodes using labels instead of paths
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 0/4] ARM: dts: Use labels instead of full paths for Exynos5 pinctrl nodes
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH] ARM: multi_v7_defconfig: Remove old Samsung USB PHY configs
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/4] ARM: dts: Use labels instead of full paths for Exynos5 pinctrl nodes
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] ARM: dts: Extend exynos5250-pinctrl nodes using labels instead of paths
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 03/10] drm: exynos_hdmi: use of_get_i2c_adapter_by_node interface
  • From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
• [PATCH 00/10] i2c/drm: fix i2c adapter device driver user counter
  • From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
• Re: [PATCH] [RFC PATCH] dmaengine: pl330: residual - do not reset on last descriptor.
  • From: Alban Browaeys <alban.browaeys@xxxxxxxxx>
• Re: [PATCH 4/4] ARM: dts: Extend exynos5420-pinctrl nodes using labels instead of paths
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 2/4] ARM: dts: Extend exynos5250-pinctrl nodes using labels instead of paths
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 3/4] ARM: dts: Include exynos5420-pinctrl after the nodes were defined
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 1/4] ARM: dts: Include exynos5250-pinctrl after the nodes were defined
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 0/4] ARM: dts: Use labels instead of full paths for Exynos5 pinctrl nodes
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH] thermal: consistently use int for temperatures
  • From: Peter Feuerer <peter@xxxxxxxx>
• Re: [PATCH] arm:irqchip: IRQCHIP_DECLARE macro is now accessible
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 4/4] ARM: dts: Extend exynos5420-pinctrl nodes using labels instead of paths
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 2/4] ARM: dts: Extend exynos5250-pinctrl nodes using labels instead of paths
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 1/4] ARM: dts: Include exynos5250-pinctrl after the nodes were defined
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 3/4] ARM: dts: Include exynos5420-pinctrl after the nodes were defined
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 0/4] ARM: dts: Use labels instead of full paths for Exynos5 pinctrl nodes
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: Add CPU cooling binding for Exynos3250-based Rinato/Monk board
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH] arm:irqchip: IRQCHIP_DECLARE macro is now accessible
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCHv5] ARM: dts: add exynos5422-cpus.dtsi to correct cpu order
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH] arm:irqchip: IRQCHIP_DECLARE macro is now accessible
  • From: Joel Porquet <joel@xxxxxxxxxxx>
• RE: [PATCH v6 0/3] cpufreq: Use cpufreq-dt driver for Exynos3250
  • From: Kukjin Kim <kgene@xxxxxxxxxx>
• RE: [PATCH] ARM: dts: Add CPU cooling binding for Exynos3250-based Rinato/Monk board
  • From: Kukjin Kim <kgene@xxxxxxxxxx>
• RE: [PATCHv5] ARM: dts: add exynos5422-cpus.dtsi to correct cpu order
  • From: Kukjin Kim <kgene@xxxxxxxxxx>
• Re: [PATCH] [RFC PATCH] dmaengine: pl330: residual - do not reset on last descriptor.
  • From: Alban Browaeys <alban.browaeys@xxxxxxxxx>
• Re: [PATCH] [RFC PATCH] dmaengine: pl330: residual - do not reset on last descriptor.
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH] [RFC PATCH] dmaengine: pl330: residual - do not reset on last descriptor.
  • From: Alban Browaeys <alban.browaeys@xxxxxxxxx>
• Re: [PATCHv5] ARM: dts: add exynos5422-cpus.dtsi to correct cpu order
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCHv5] ARM: dts: add exynos5422-cpus.dtsi to correct cpu order
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: exynos4: add DMA support for serial ports
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH] thermal: consistently use int for temperatures
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH] thermal: consistently use int for temperatures
  • From: Darren Hart <dvhart@xxxxxxxxxxxxx>
• Re: [PATCH v2 12/23] drm/exynos: don't track enabled state at exynos_crtc
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH 0/2] thermal: exynos: Fix minor issue
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• Re: [PATCH] thermal: exynos: Disable the regulator on probe failure
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH v2 23/23] drm/exynos: remove struct exynos_drm_encoder layer
  • From: Gustavo Padovan <gustavo@xxxxxxxxxxx>
• [PATCH v2 22/23] drm/exynos: fold encoder setup into exynos_drm_load()
  • From: Gustavo Padovan <gustavo@xxxxxxxxxxx>
• [PATCH v2 21/23] drm/exynos: remove exynos_drm_create_enc_conn()
  • From: Gustavo Padovan <gustavo@xxxxxxxxxxx>
• [PATCH v2 20/23] drm/exynos: remove exynos_encoder's .commit() op
  • From: Gustavo Padovan <gustavo@xxxxxxxxxxx>
• [PATCH v2 19/23] drm/exynos: remove extra call to exynos_dp_commit()
  • From: Gustavo Padovan <gustavo@xxxxxxxxxxx>
• [PATCH v2 18/23] drm/exynos: remove extra call to hdmi_commit()
  • From: Gustavo Padovan <gustavo@xxxxxxxxxxx>
• [PATCH v2 17/23] drm/exynos: remove struct exynos_drm_display
  • From: Gustavo Padovan <gustavo@xxxxxxxxxxx>
• [PATCH v2 16/23] drm/exynos: simplify calculation of possible CRTCs
  • From: Gustavo Padovan <gustavo@xxxxxxxxxxx>
• [PATCH v2 15/23] drm/exynos: remove unused .remove() and .check_mode() ops from display
  • From: Gustavo Padovan <gustavo@xxxxxxxxxxx>
• [PATCH v2 14/23] drm/exynos: remove wrappers for phy_power_{on,off}
  • From: Gustavo Padovan <gustavo@xxxxxxxxxxx>
• [PATCH v2 13/23] drm/exynos: split display's .dpms() into .enable() and .disable()
  • From: Gustavo Padovan <gustavo@xxxxxxxxxxx>
• [PATCH v2 12/23] drm/exynos: don't track enabled state at exynos_crtc
  • From: Gustavo Padovan <gustavo@xxxxxxxxxxx>
• [PATCH v2 11/23] drm/exynos: return return value of exynos_crtc->enable_vblank
  • From: Gustavo Padovan <gustavo@xxxxxxxxxxx>
• [PATCH v2 10/23] drm/exynos: unify exynos_drm_plane names with drm core
  • From: Gustavo Padovan <gustavo@xxxxxxxxxxx>
• [PATCH v2 09/23] drm/exynos: remove unused fields from struct exynos_drm_plane
  • From: Gustavo Padovan <gustavo@xxxxxxxxxxx>
• [PATCH v2 08/23] drm/exynos: use drm atomic state directly
  • From: Gustavo Padovan <gustavo@xxxxxxxxxxx>
• [PATCH v2 07/23] drm/exynos: pass struct exynos_drm_plane in update/enable
  • From: Gustavo Padovan <gustavo@xxxxxxxxxxx>
• [PATCH v2 06/23] drm/exynos: rename win_commit/disable to atomic-like names
  • From: Gustavo Padovan <gustavo@xxxxxxxxxxx>
• [PATCH v2 05/23] drm/exynos: add atomic asynchronous commit
  • From: Gustavo Padovan <gustavo@xxxxxxxxxxx>
• [PATCH v2 04/23] drm/exynos: remove duplicated check for suspend
  • From: Gustavo Padovan <gustavo@xxxxxxxxxxx>
• [PATCH v2 03/23] drm/exynos: use KMS version of DRM vblanks functions
  • From: Gustavo Padovan <gustavo@xxxxxxxxxxx>
• [PATCH v2 02/23] drm/exynos: calculate vrefresh instead of use a fixed value
  • From: Gustavo Padovan <gustavo@xxxxxxxxxxx>
• [PATCH v2 01/23] drm/exynos: pass the correct pipe number
  • From: Gustavo Padovan <gustavo@xxxxxxxxxxx>
• [PATCH v2 00/23] drm/exynos: atomic improvements + exynos_encoder removal
  • From: Gustavo Padovan <gustavo@xxxxxxxxxxx>
• [PATCHv5] ARM: dts: add exynos5422-cpus.dtsi to correct cpu order
  • From: Chanho Park <parkch98@xxxxxxxxx>
• Re: [PATCHv4] ARM: dts: add exynos5422-cpus.dtsi to correct cpu order
  • From: Chanho Park <parkch98@xxxxxxxxx>
• Re: [PATCH] thermal: consistently use int for temperatures
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• Re: [PATCH] thermal: consistently use int for temperatures
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH] thermal: consistently use int for temperatures
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH] thermal: consistently use int for temperatures
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] thermal: exynos: Disable the regulator on probe failure
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH] thermal: exynos: Disable the regulator on probe failure
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• Re: [PATCH v2] clk: exynos4: Fix wrong clock for Exynos4x12 ADC
  • From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
• Re: [PATCH v2] clk: exynos4: Fix wrong clock for Exynos4x12 ADC
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH] thermal: exynos: Disable the regulator on probe failure
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: Add CPU cooling binding for Exynos3250-based Rinato/Monk board
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCHv4] ARM: dts: add exynos5422-cpus.dtsi to correct cpu order
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCHv4] ARM: dts: add exynos5422-cpus.dtsi to correct cpu order
  • From: Chanho Park <parkch98@xxxxxxxxx>
• [PATCH] Documentation: ARM: EXYNOS: Extend boot loader interface documentation
  • From: Krzysztof Kozlowski <k.kozlowski.k@xxxxxxxxx>
• [PATCH] media: s5p-jpeg: Eliminate double kfree
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• Re: [PATCH 19/23] drm/exynos: remove extra call to exynos_dp_commit()
  • From: Joonyoung Shim <jy0922.shim@xxxxxxxxxxx>
• Re: [PATCH 02/23] drm/exynos: calculate vrefresh instead of use a fixed value
  • From: Gustavo Padovan <gustavo@xxxxxxxxxxx>
• Re: [PATCH v6 0/3] cpufreq: Use cpufreq-dt driver for Exynos3250
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• Re: [PATCH] drm/exynos: iommu: fix potential NULL pointer dereference
  • From: Joonyoung Shim <jy0922.shim@xxxxxxxxxxx>
• Re: [PATCH 00/23] drm/exynos: atomic improvements + exynos_encoder removal
  • From: Joonyoung Shim <jy0922.shim@xxxxxxxxxxx>
• Re: [PATCH 12/23] drm/exynos: don't track enabled state at exynos_crtc
  • From: Joonyoung Shim <jy0922.shim@xxxxxxxxxxx>
• Re: [PATCH 19/23] drm/exynos: remove extra call to exynos_dp_commit()
  • From: Joonyoung Shim <jy0922.shim@xxxxxxxxxxx>
• Re: [PATCH 08/23] drm/exynos: pass struct exynos_drm_plane in update/enable
  • From: Joonyoung Shim <jy0922.shim@xxxxxxxxxxx>
• Re: [PATCH 02/23] drm/exynos: calculate vrefresh instead of use a fixed value
  • From: Joonyoung Shim <jy0922.shim@xxxxxxxxxxx>
• Re: [PATCH v3 4/4] cpufreq: exynos: remove Exynos5250 specific cpufreq driver support
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• Re: [PATCH v3 3/4] ARM: Exynos: switch to using generic cpufreq driver for Exynos5250
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• Re: [PATCH v3 2/4] ARM: dts: Exynos5250: add CPU OPP and regulator supply property
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• Re: [PATCH v3 1/4] clk: samsung: exynos5250: add cpu clock configuration data and instantiate cpu clock
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• Re: [PATCH 2/2] thermal: exynos: Remove unused code related to platform_data on probe()
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: Add CPU cooling binding for Exynos3250-based Rinato/Monk board
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH 0/2] thermal: exynos: Fix minor issue
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• [PATCH 2/2] thermal: exynos: Remove unused code related to platform_data on probe()
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• [PATCH 1/2] thermal: exynos: Add the dependency of CONFIG_THERMAL_OF instead of CONFIG_OF
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: Add CPU cooling binding for Exynos3250-based Rinato/Monk board
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: Add CPU cooling binding for Exynos3250-based Rinato/Monk board
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH] ARM: dts: Add CPU cooling binding for Exynos3250-based Rinato/Monk board
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• [PATCH v6 2/3] ARM: dts: Add CPU OPP and regulator supply property for Exynos3250
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• [PATCH v6 1/3] clk: samsung: exynos3250: Add cpu clock configuration data and instaniate cpu clock
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• [PATCH v6 0/3] cpufreq: Use cpufreq-dt driver for Exynos3250
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• [PATCH v6 3/3] ARM: exynos: Add exynos3250 compatible to use generic cpufreq driver
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• Re: [PATCH v5 1/3] clk: samsung: exynos3250: Add cpu clock configuration data and instaniate cpu clock
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH v5 2/3] ARM: dts: Add CPU OPP and regulator supply property for Exynos3250
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• Re: [PATCH v5 1/3] clk: samsung: exynos3250: Add cpu clock configuration data and instaniate cpu clock
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v5 2/3] ARM: dts: Add CPU OPP and regulator supply property for Exynos3250
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v5 3/3] ARM: exynos: Add exynos3250 compatible to use generic cpufreq driver
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v3 2/4] ARM: dts: Exynos5250: add CPU OPP and regulator supply property
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCHv3] ARM: dts: add exynos5422-cpus.dtsi to correct cpu order
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCHv3] clk samsung exynos5420 add CLK_RECALC_NEW_RATES flag to mout_apll and mout_kpll clock.
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• Re: [PATCHv3] ARM: dts: add exynos5422-cpus.dtsi to correct cpu order
  • From: Chanho Park <parkch98@xxxxxxxxx>
• Re: [PATCH v2 4/4] cpufreq: exynos: remove Exynos5250 specific cpufreq driver support
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• [PATCH v5 0/3] cpufreq: Use cpufreq-dt driver for Exynos3250
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• [PATCH v5 1/3] clk: samsung: exynos3250: Add cpu clock configuration data and instaniate cpu clock
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• [PATCH v5 2/3] ARM: dts: Add CPU OPP and regulator supply property for Exynos3250
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• [PATCH v5 3/3] ARM: exynos: Add exynos3250 compatible to use generic cpufreq driver
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• [PATCH v3 4/4] cpufreq: exynos: remove Exynos5250 specific cpufreq driver support
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• [PATCH v3 3/4] ARM: Exynos: switch to using generic cpufreq driver for Exynos5250
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• [PATCH v3 2/4] ARM: dts: Exynos5250: add CPU OPP and regulator supply property
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• [PATCH v3 1/4] clk: samsung: exynos5250: add cpu clock configuration data and instantiate cpu clock
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• [PATCH v3 0/4] cpufreq: use generic cpufreq drivers for Exynos5250 platform
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• Re: [PATCHv3] clk samsung exynos5420 add CLK_RECALC_NEW_RATES flag to mout_apll and mout_kpll clock.
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• Re: [PATCH 1/2] spi/s3c24xx: remove unnecessary memset of s3c24xx_spi
  • From: Daniel Kurtz <djkurtz@xxxxxxxxxxxx>
• [PATCH 2/2] spi/rockchip: remove unnecessary memset of rockchip_spi
  • From: Alexey Klimov <klimov.linux@xxxxxxxxx>
• [PATCH 1/2] spi/s3c24xx: remove unnecessary memset of s3c24xx_spi
  • From: Alexey Klimov <klimov.linux@xxxxxxxxx>
• Re: [PATCH] clk: samsung: fix cpu clock's flags checking
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• Re: [PATCH] clk: samsung: fix cpu clock's flags checking
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• Re: [PATCH] clk: samsung: fix cpu clock's flags checking
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• Re: [PATCHv7 04/15] HID: add HDMI CEC specific keycodes
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCHv7 04/15] HID: add HDMI CEC specific keycodes
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH] clk: samsung: fix cpu clock's flags checking
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• Re: [PATCH] pinctrl: samsung: Remove old unused defines
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 2/3] mfd: Remove MFD_CROS_EC depends on X86 || ARM
  • From: Paul Gortmaker <paul.gortmaker@xxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: exynos4: add DMA support for serial ports
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v2 4/4] cpufreq: exynos: remove Exynos5250 specific cpufreq driver support
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v2 3/4] ARM: Exynos: switch to using generic cpufreq driver for Exynos5250
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v2 2/4] ARM: dts: Exynos5250: add CPU OPP and regulator supply property
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH] clk: samsung: fix cpu clock's flags checking
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCHv7 04/15] HID: add HDMI CEC specific keycodes
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCHv7 05/15] input.h: add BUS_CEC type
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH] clk: samsung: fix cpu clock's flags checking
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• [PATCH v2 1/4] clk: samsung: exynos5250: add cpu clock configuration data and instantiate cpu clock
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• [PATCH v2 0/4] cpufreq: use generic cpufreq drivers for Exynos5250 platform
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• [PATCH v2 4/4] cpufreq: exynos: remove Exynos5250 specific cpufreq driver support
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• [PATCH v2 3/4] ARM: Exynos: switch to using generic cpufreq driver for Exynos5250
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• [PATCH v2 2/4] ARM: dts: Exynos5250: add CPU OPP and regulator supply property
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• Re: [PATCH] iommu: Ignore -ENODEV errors from add_device call-back returning -ENODEV
  • From: Joerg Roedel <joro@xxxxxxxxxx>
• [PATCH] ARM: dts: exynos4: add DMA support for serial ports
  • From: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
• Re: [RESEND PATCH v3] clocksource: exynos_mct: fix for sleeping in atomic ctx handling cpu hotplug notif.
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH 4/4] cec-ctl: CEC control utility
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCH 0/4] cec-ctl/compliance: new CEC utilities
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCH 3/4] cec-compliance: add new CEC compliance utility
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCH 2/4] sync-with-kernel
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCH 1/4] Makefile.am: copy cec headers with make sync-with-kernel
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCHv7 09/15] DocBook/media: add CEC documentation
  • From: Hans Verkuil <hans.verkuil@xxxxxxxxx>
• [PATCHv7 12/15] adv7842: add cec support
  • From: Hans Verkuil <hans.verkuil@xxxxxxxxx>
• [PATCHv7 13/15] cec: adv7511: add cec support.
  • From: Hans Verkuil <hans.verkuil@xxxxxxxxx>
• [PATCHv7 05/15] input.h: add BUS_CEC type
  • From: Hans Verkuil <hans.verkuil@xxxxxxxxx>
• [PATCHv7 15/15] cobalt: add cec support
  • From: Hans Verkuil <hans.verkuil@xxxxxxxxx>
• [PATCHv7 10/15] v4l2-subdev: add HDMI CEC ops
  • From: Hans Verkuil <hans.verkuil@xxxxxxxxx>
• [PATCHv7 14/15] cec: s5p-cec: Add s5p-cec driver
  • From: Hans Verkuil <hans.verkuil@xxxxxxxxx>
• [PATCHv7 11/15] cec: adv7604: add cec support.
  • From: Hans Verkuil <hans.verkuil@xxxxxxxxx>
• [PATCHv7 08/15] cec.txt: add CEC framework documentation
  • From: Hans Verkuil <hans.verkuil@xxxxxxxxx>
• [PATCHv7 04/15] HID: add HDMI CEC specific keycodes
  • From: Hans Verkuil <hans.verkuil@xxxxxxxxx>
• [PATCHv7 00/15] HDMI CEC framework
  • From: Hans Verkuil <hans.verkuil@xxxxxxxxx>
• [PATCHv7 01/15] dts: exynos4*: add HDMI CEC pin definition to pinctrl
  • From: Hans Verkuil <hans.verkuil@xxxxxxxxx>
• [PATCHv7 03/15] dts: exynos4412-odroid*: enable the HDMI CEC device
  • From: Hans Verkuil <hans.verkuil@xxxxxxxxx>
• [PATCHv7 06/15] rc: Add HDMI CEC protocol handling
  • From: Hans Verkuil <hans.verkuil@xxxxxxxxx>
• [PATCHv7 02/15] dts: exynos4: add node for the HDMI CEC device
  • From: Hans Verkuil <hans.verkuil@xxxxxxxxx>
• Re: [RESEND PATCH v3] clocksource: exynos_mct: fix for sleeping in atomic ctx handling cpu hotplug notif.
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [RESEND PATCH v3] clocksource: exynos_mct: fix for sleeping in atomic ctx handling cpu hotplug notif.
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [RESEND PATCH v3] clocksource: exynos_mct: fix for sleeping in atomic ctx handling cpu hotplug notif.
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCH] clocksource: exynos_mct: remove unneeded container_of()
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCH] iommu: Ignore -ENODEV errors from add_device call-back returning -ENODEV
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH] iommu: Ignore -ENODEV errors from add_device call-back returning -ENODEV
  • From: Joerg Roedel <joro@xxxxxxxxxx>
• Re: [PATCH] drm/exynos: iommu: fix potential NULL pointer dereference
  • From: Hyungwon Hwang <human.hwang@xxxxxxxxxxx>
• Re: [PATCH] GPU-DRM-Exynos: Delete unnecessary checks before two function calls
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [RESEND PATCH v3] clocksource: exynos_mct: fix for sleeping in atomic ctx handling cpu hotplug notif.
  • From: Damian Eppel <d.eppel@xxxxxxxxxxx>
• Re: clk: samsung: add infrastructure to register cpu clocks
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• Re: clk: samsung: add infrastructure to register cpu clocks
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: clk: samsung: add infrastructure to register cpu clocks
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>