The board DTS are using numeric values instead of the defined GPIO
constanst to express polarity, use them to make the DTS more clear.
Signed-off-by: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/exynos3250-monk.dts | 8 ++++----
arch/arm/boot/dts/exynos3250-rinato.dts | 10 +++++-----
2 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts
index 540a0adf2be6..c14129e0761d 100644
--- a/arch/arm/boot/dts/exynos3250-monk.dts
+++ b/arch/arm/boot/dts/exynos3250-monk.dts
@@ -52,13 +52,13 @@
regulator-name = "V_EMMC_2.8V-fixed";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpk0 2 0>;
+ gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
i2c_max77836: i2c-gpio-0 {
compatible = "i2c-gpio";
- gpios = <&gpd0 2 0>, <&gpd0 3 0>;
+ gpios = <&gpd0 2 GPIO_ACTIVE_HIGH>, <&gpd0 3 GPIO_ACTIVE_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
@@ -266,14 +266,14 @@
regulator-name = "V_EMMC_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- samsung,ext-control-gpios = <&gpk0 2 0>;
+ samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
};
ldo12_reg: LDO12 {
regulator-name = "V_EMMC_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- samsung,ext-control-gpios = <&gpk0 2 0>;
+ samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
};
ldo13_reg: LDO13 {
diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
index 41a5fafb9aa9..830e216f7e10 100644
--- a/arch/arm/boot/dts/exynos3250-rinato.dts
+++ b/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -49,7 +49,7 @@
i2c_max77836: i2c-gpio-0 {
compatible = "i2c-gpio";
- gpios = <&gpd0 2 0>, <&gpd0 3 0>;
+ gpios = <&gpd0 2 GPIO_ACTIVE_HIGH>, <&gpd0 3 GPIO_ACTIVE_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
@@ -188,8 +188,8 @@
reg = <0>;
vdd3-supply = <&ldo16_reg>;
vci-supply = <&ldo20_reg>;
- reset-gpios = <&gpe0 1 0>;
- te-gpios = <&gpx0 6 0>;
+ reset-gpios = <&gpe0 1 GPIO_ACTIVE_HIGH>;
+ te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
power-on-delay= <30>;
power-off-delay= <120>;
reset-delay = <5>;
@@ -368,14 +368,14 @@
regulator-name = "V_EMMC_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- samsung,ext-control-gpios = <&gpk0 2 0>;
+ samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
};
ldo12_reg: LDO12 {
regulator-name = "V_EMMC_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- samsung,ext-control-gpios = <&gpk0 2 0>;
+ samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
};
ldo13_reg: LDO13 {
--
2.4.3
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
