The board DTS are using numeric values instead of the defined GPIO
constanst to express polarity, use them to make the DTS more clear.
Signed-off-by: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/exynos4210-origen.dts | 15 ++++-----
arch/arm/boot/dts/exynos4210-smdkv310.dts | 3 +-
arch/arm/boot/dts/exynos4210-trats.dts | 29 ++++++++---------
arch/arm/boot/dts/exynos4210-universal_c210.dts | 42 +++++++++++++------------
4 files changed, 47 insertions(+), 42 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index e050d85cdacd..b8f866991bdd 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -16,6 +16,7 @@
/dts-v1/;
#include "exynos4210.dtsi"
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
@@ -45,7 +46,7 @@
regulator-name = "VMEM_VDD_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpx1 1 0>;
+ gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
@@ -57,35 +58,35 @@
up {
label = "Up";
- gpios = <&gpx2 0 1>;
+ gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_UP>;
gpio-key,wakeup;
};
down {
label = "Down";
- gpios = <&gpx2 1 1>;
+ gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_DOWN>;
gpio-key,wakeup;
};
back {
label = "Back";
- gpios = <&gpx1 7 1>;
+ gpios = <&gpx1 7 GPIO_ACTIVE_LOW>;
linux,code = <KEY_BACK>;
gpio-key,wakeup;
};
home {
label = "Home";
- gpios = <&gpx1 6 1>;
+ gpios = <&gpx1 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOME>;
gpio-key,wakeup;
};
menu {
label = "Menu";
- gpios = <&gpx1 5 1>;
+ gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_MENU>;
gpio-key,wakeup;
};
@@ -94,7 +95,7 @@
leds {
compatible = "gpio-leds";
status {
- gpios = <&gpx1 3 1>;
+ gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
};
};
diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
index 043b03caff8f..bc1448ba95d3 100644
--- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
+++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
@@ -16,6 +16,7 @@
/dts-v1/;
#include "exynos4210.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "Samsung smdkv310 evaluation board based on Exynos4210";
@@ -182,7 +183,7 @@
};
&spi_2 {
- cs-gpios = <&gpc1 2 0>;
+ cs-gpios = <&gpc1 2 GPIO_ACTIVE_HIGH>;
status = "okay";
w25x80@0 {
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index ba34886f8b65..c69e468efd2e 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -14,6 +14,7 @@
/dts-v1/;
#include "exynos4210.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "Samsung Trats based on Exynos4210";
@@ -39,7 +40,7 @@
regulator-name = "VMEM_VDD_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpk0 2 0>;
+ gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -48,7 +49,7 @@
regulator-name = "TSP_FIXED_VOLTAGES";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpl0 3 0>;
+ gpio = <&gpl0 3 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -57,7 +58,7 @@
regulator-name = "8M_AF_2.8V_EN";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpk1 1 0>;
+ gpio = <&gpk1 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -66,7 +67,7 @@
regulator-name = "CAM_IO_EN";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpe2 1 0>;
+ gpio = <&gpe2 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -75,7 +76,7 @@
regulator-name = "8M_1.2V_EN";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
- gpio = <&gpe2 5 0>;
+ gpio = <&gpe2 5 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -84,7 +85,7 @@
regulator-name = "VT_CORE_1.5V";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
- gpio = <&gpe2 2 0>;
+ gpio = <&gpe2 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
@@ -93,21 +94,21 @@
compatible = "gpio-keys";
vol-down-key {
- gpios = <&gpx2 1 1>;
+ gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
linux,code = <114>;
label = "volume down";
debounce-interval = <10>;
};
vol-up-key {
- gpios = <&gpx2 0 1>;
+ gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
linux,code = <115>;
label = "volume up";
debounce-interval = <10>;
};
power-key {
- gpios = <&gpx2 7 1>;
+ gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
linux,code = <116>;
label = "power";
debounce-interval = <10>;
@@ -115,7 +116,7 @@
};
ok-key {
- gpios = <&gpx3 5 1>;
+ gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
linux,code = <352>;
label = "ok";
debounce-interval = <10>;
@@ -218,7 +219,7 @@
compatible = "samsung,s6e8aa0";
vdd3-supply = <&vcclcd_reg>;
vci-supply = <&vlcd_reg>;
- reset-gpios = <&gpy4 5 0>;
+ reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
power-on-delay= <50>;
reset-delay = <100>;
init-delay = <100>;
@@ -304,9 +305,9 @@
max8997,pmic-ignore-gpiodvs-side-effect;
max8997,pmic-buck125-default-dvs-idx = <0>;
- max8997,pmic-buck125-dvs-gpios = <&gpx0 5 0>,
- <&gpx0 6 0>,
- <&gpl0 0 0>;
+ max8997,pmic-buck125-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>,
+ <&gpx0 6 GPIO_ACTIVE_HIGH>,
+ <&gpl0 0 GPIO_ACTIVE_HIGH>;
max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
<1250000>, <1200000>,
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index eb379526e234..896be8f2342d 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -14,6 +14,7 @@
/dts-v1/;
#include "exynos4210.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "Samsung Universal C210 based on Exynos4210 rev0";
@@ -65,7 +66,7 @@
regulator-name = "VMEM_VDD_2_8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpe1 3 0>;
+ gpio = <&gpe1 3 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -73,21 +74,21 @@
compatible = "gpio-keys";
vol-up-key {
- gpios = <&gpx2 0 1>;
+ gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
linux,code = <115>;
label = "volume up";
debounce-interval = <1>;
};
vol-down-key {
- gpios = <&gpx2 1 1>;
+ gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
linux,code = <114>;
label = "volume down";
debounce-interval = <1>;
};
config-key {
- gpios = <&gpx2 2 1>;
+ gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
linux,code = <171>;
label = "config";
debounce-interval = <1>;
@@ -95,14 +96,14 @@
};
camera-key {
- gpios = <&gpx2 3 1>;
+ gpios = <&gpx2 3 GPIO_ACTIVE_LOW>;
linux,code = <212>;
label = "camera";
debounce-interval = <1>;
};
power-key {
- gpios = <&gpx2 7 1>;
+ gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
linux,code = <116>;
label = "power";
debounce-interval = <1>;
@@ -110,7 +111,7 @@
};
ok-key {
- gpios = <&gpx3 5 1>;
+ gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
linux,code = <352>;
label = "ok";
debounce-interval = <1>;
@@ -122,7 +123,7 @@
regulator-name = "TSP_2_8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpe2 3 0>;
+ gpio = <&gpe2 3 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -131,17 +132,17 @@
#address-cells = <1>;
#size-cells = <0>;
- gpio-sck = <&gpy3 1 0>;
- gpio-mosi = <&gpy3 3 0>;
+ gpio-sck = <&gpy3 1 GPIO_ACTIVE_HIGH>;
+ gpio-mosi = <&gpy3 3 GPIO_ACTIVE_HIGH>;
num-chipselects = <1>;
- cs-gpios = <&gpy4 3 0>;
+ cs-gpios = <&gpy4 3 GPIO_ACTIVE_HIGH>;
lcd@0 {
compatible = "samsung,ld9040";
reg = <0>;
vdd3-supply = <&ldo7_reg>;
vci-supply = <&ldo17_reg>;
- reset-gpios = <&gpy4 5 0>;
+ reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
spi-max-frequency = <1200000>;
spi-cpol;
spi-cpha;
@@ -218,13 +219,13 @@
regulator-name = "HDMI_5V";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpe0 1 0>;
+ gpio = <&gpe0 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
hdmi_ddc: i2c-ddc {
compatible = "i2c-gpio";
- gpios = <&gpe4 2 0 &gpe4 3 0>;
+ gpios = <&gpe4 2 GPIO_ACTIVE_HIGH &gpe4 3 GPIO_ACTIVE_HIGH>;
i2c-gpio,delay-us = <100>;
#address-cells = <1>;
#size-cells = <0>;
@@ -267,7 +268,7 @@
};
&hdmi {
- hpd-gpio = <&gpx3 7 0>;
+ hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&hdmi_hpd>;
hdmi-en-supply = <&hdmi_en>;
@@ -311,7 +312,8 @@
compatible = "maxim,max8952";
reg = <0x60>;
- max8952,vid-gpios = <&gpx0 3 0>, <&gpx0 4 0>;
+ max8952,vid-gpios = <&gpx0 3 GPIO_ACTIVE_HIGH>,
+ <&gpx0 4 GPIO_ACTIVE_HIGH>;
max8952,default-mode = <0>;
max8952,dvs-mode-microvolt = <1250000>, <1200000>,
<1050000>, <950000>;
@@ -330,13 +332,13 @@
reg = <0x66>;
max8998,pmic-buck1-default-dvs-idx = <0>;
- max8998,pmic-buck1-dvs-gpios = <&gpx0 5 0>,
- <&gpx0 6 0>;
+ max8998,pmic-buck1-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>,
+ <&gpx0 6 GPIO_ACTIVE_HIGH>;
max8998,pmic-buck1-dvs-voltage = <1100000>, <1000000>,
<1100000>, <1000000>;
max8998,pmic-buck2-default-dvs-idx = <0>;
- max8998,pmic-buck2-dvs-gpio = <&gpe2 0 0>;
+ max8998,pmic-buck2-dvs-gpio = <&gpe2 0 GPIO_ACTIVE_HIGH>;
max8998,pmic-buck2-dvs-voltage = <1200000>, <1100000>;
regulators {
@@ -551,7 +553,7 @@
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
pinctrl-names = "default";
vmmc-supply = <&ldo5_reg>;
- cd-gpios = <&gpx3 4 0>;
+ cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>;
cd-inverted;
status = "okay";
};
--
2.4.3
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
