Torben Viets wrote: > Steven Toth wrote: > >> Torben Viets wrote: >> >>> Steven Toth wrote: >>> >>>> Torben Viets wrote: >>>> >>>>> Hello, >>>>> >>>>> I've got it: http://pastebin.com/f50f33096 >>>>> >>>>> the trick was to compile the kernel (now linux-2.6.25-git13) with: >>>>> >>>>> CONFIG_I2C_DEBUG_CORE=y >>>>> CONFIG_I2C_DEBUG_ALGO=y >>>>> CONFIG_I2C_DEBUG_BUS=y >>>>> CONFIG_I2C_DEBUG_CHIP=y >>>>> >>>>> I hope you've got an idea, i updated my bios (afters this my RAM >>>>> doesn't work anymore), installed a new Ubuntu Linux hardy (8.04)... >>>>> >>>>> One last question when will the firmware be loaded and why there is >>>>> no hotplug tool in ubuntu, or is it in the kernel? >>>>> >>>>> greetings >>>>> Torben >>>>> >>>>> >>>>> Steven Toth wrote: >>>>> >>>>>> Torben Viets wrote: >>>>>> >>>>>>> Steven Toth wrote: >>>>>>> >>>>>>>> Torben Viets wrote: >>>>>>>> >>>>>>>>> Steven Toth wrote: >>>>>>>>> >>>>>>>>>> Torben Viets wrote: >>>>>>>>>> >>>>>>>>>>> Hello, >>>>>>>>>>> >>>>>>>>>>> thanks for the quick reply. >>>>>>>>>>> >>>>>>>>>>> Steven Toth wrote: >>>>>>>>>>> >>>>>>>>>>>> Torben Viets wrote: >>>>>>>>>>>> >>>>>>>>>>>>> Hello, >>>>>>>>>>>>> >>>>>>>>>>>>> I have a Hauppauge HVR-1700 PCI Express, I have read all >>>>>>>>>>>>> posts about >>>>>>>>>>>>> this card here, but I didn't get it working, how does it work? >>>>>>>>>>>>> >>>>>>>>>>>> It's working fine for me on a stock 7.10 ubuntu install. >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>>> Kernel: linux-2.6.25-git10 >>>>>>>>>>>>> >>>>>>>>>>>>> Firmware-Files: >>>>>>>>>>>>> ls -al /lib/firmware/2.6.25-git10/ >>>>>>>>>>>>> total 416 >>>>>>>>>>>>> drwxr-xr-x 2 root root 91 Apr 27 16:27 . >>>>>>>>>>>>> drwxr-xr-x 3 root root 25 Apr 27 16:26 .. >>>>>>>>>>>>> -rw-r--r-- 1 root root 24878 Apr 27 16:27 >>>>>>>>>>>>> dvb-fe-tda10048-1.0.fw >>>>>>>>>>>>> -r--r--r-- 1 root root 16382 Apr 27 16:27 >>>>>>>>>>>>> v4l-cx23885-avcore-01.fw >>>>>>>>>>>>> -r--r--r-- 1 root root 376836 Apr 27 16:26 v4l-cx23885-enc.fw >>>>>>>>>>>>> >>>>>>>>>>>>> The modules I use are from the actual v4l-dvb hg, if I type >>>>>>>>>>>>> make load, >>>>>>>>>>>>> the only thing I get is a /dev/video0, but I have no >>>>>>>>>>>>> picture with xawtv... >>>>>>>>>>>>> >>>>>>>>>>>> /dev/video doesn't work, it's not supported. >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>> Are there any plans to support it? >>>>>>>>>>> >>>>>>>>>> No immediate plans. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>>>> You should aim to use the dvb-apps tools (tzap, scan) and >>>>>>>>>>>> mplayer as example tools, or MythTV as an app. >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>>> The DVB doesn't work at all, I have no /dev/dvb*, here is >>>>>>>>>>>>> my dmesg: >>>>>>>>>>>>> >>>>>>>>>>>>> cx23885 driver version 0.0.1 loaded >>>>>>>>>>>>> ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 24 (level, low) >>>>>>>>>>>>> -> IRQ 24 >>>>>>>>>>>>> CORE cx23885[0]: subsystem: 0070:8101, board: Hauppauge >>>>>>>>>>>>> WinTV-HVR1700 >>>>>>>>>>>>> [card=8,autodetected] >>>>>>>>>>>>> cx23885[0]: i2c bus 0 registered >>>>>>>>>>>>> cx23885[0]: i2c bus 1 registered >>>>>>>>>>>>> cx23885[0]: i2c bus 2 registered >>>>>>>>>>>>> tveeprom 0-0050: Huh, no eeprom present (err=-5)? >>>>>>>>>>>>> tveeprom 0-0050: Encountered bad packet header [00]. >>>>>>>>>>>>> Corrupt or not a Hauppauge >>>>>>>>>>>>> eeprom. >>>>>>>>>>>>> cx23885[0]: warning: unknown hauppauge model #0 >>>>>>>>>>>>> cx23885[0]: hauppauge eeprom: model=0 >>>>>>>>>>>>> cx23885[0]: cx23885 based dvb card >>>>>>>>>>>>> tda10048_readreg: readreg error (ret == -5) >>>>>>>>>>>>> cx23885[0]: frontend initialization failed >>>>>>>>>>>>> cx23885_dvb_register() dvb_register failed err = -1 >>>>>>>>>>>>> cx23885_dev_setup() Failed to register dvb on VID_C >>>>>>>>>>>>> cx23885_dev_checkrevision() New hardware revision found 0x0 >>>>>>>>>>>>> cx23885_dev_checkrevision() Hardware revision unknown 0x0 >>>>>>>>>>>>> cx23885[0]/0: found at 0000:02:00.0, rev: 2, irq: 24, >>>>>>>>>>>>> latency: 0, mmio: >>>>>>>>>>>>> 0xfe800000 >>>>>>>>>>>>> >>>>>>>>>>>> This looks bad, it looks like i2c is broken badly, so that >>>>>>>>>>>> the eeprom isn't detected and the demodulator isn't found >>>>>>>>>>>> during attach. This is the reason why your missing >>>>>>>>>>>> /dev/dvb/adapterX/ >>>>>>>>>>>> >>>>>>>>>>>> No idea why. Try loading the cx23885 with debug=5 and report >>>>>>>>>>>> any log messages here - on this mailing list. >>>>>>>>>>>> >>>>>>>>>>> here ist the debug=5 output >>>>>>>>>>> >>>>>>>>>>> cx23885[0]/0: cx23885_dev_setup() Memory configured for PCIe >>>>>>>>>>> bridge type 885 >>>>>>>>>>> cx23885[0]/0: cx23885_init_tsport(portno=2) >>>>>>>>>>> CORE cx23885[0]: subsystem: 0070:8101, board: Hauppauge >>>>>>>>>>> WinTV-HVR1700 [card=8,autodetected] >>>>>>>>>>> cx23885[0]/0: cx23885_pci_quirks() >>>>>>>>>>> cx23885[0]/0: cx23885_dev_setup() tuner_type = 0x0 tuner_addr >>>>>>>>>>> = 0x0 >>>>>>>>>>> cx23885[0]/0: cx23885_dev_setup() radio_type = 0x0 radio_addr >>>>>>>>>>> = 0x0 >>>>>>>>>>> cx23885[0]/0: cx23885_reset() >>>>>>>>>>> cx23885[0]/0: cx23885_sram_channel_setup() Configuring >>>>>>>>>>> channel [VID A] >>>>>>>>>>> cx23885[0]/0: cx23885_sram_channel_setup() 0x000107b0 <- >>>>>>>>>>> 0x00000040 >>>>>>>>>>> cx23885[0]/0: cx23885_sram_channel_setup() 0x000107c0 <- >>>>>>>>>>> 0x00000b80 >>>>>>>>>>> cx23885[0]/0: cx23885_sram_channel_setup() 0x000107d0 <- >>>>>>>>>>> 0x000016c0 >>>>>>>>>>> cx23885[0]/0: [bridge 885] sram setup VID A: bpl=2880 lines=3 >>>>>>>>>>> cx23885[0]/0: cx23885_sram_channel_setup() Erasing channel [ch2] >>>>>>>>>>> cx23885[0]/0: cx23885_sram_channel_setup() Configuring >>>>>>>>>>> channel [TS1 B] >>>>>>>>>>> cx23885[0]/0: cx23885_sram_channel_setup() 0x00010400 <- >>>>>>>>>>> 0x00005000 >>>>>>>>>>> cx23885[0]/0: cx23885_sram_channel_setup() 0x00010410 <- >>>>>>>>>>> 0x000052f0 >>>>>>>>>>> cx23885[0]/0: cx23885_sram_channel_setup() 0x00010420 <- >>>>>>>>>>> 0x000055e0 >>>>>>>>>>> cx23885[0]/0: cx23885_sram_channel_setup() 0x00010430 <- >>>>>>>>>>> 0x000058d0 >>>>>>>>>>> cx23885[0]/0: cx23885_sram_channel_setup() 0x00010440 <- >>>>>>>>>>> 0x00005bc0 >>>>>>>>>>> cx23885[0]/0: [bridge 885] sram setup TS1 B: bpl=752 lines=5 >>>>>>>>>>> cx23885[0]/0: cx23885_sram_channel_setup() Erasing channel [ch4] >>>>>>>>>>> cx23885[0]/0: cx23885_sram_channel_setup() Erasing channel [ch5] >>>>>>>>>>> cx23885[0]/0: cx23885_sram_channel_setup() Configuring >>>>>>>>>>> channel [TS2 C] >>>>>>>>>>> cx23885[0]/0: cx23885_sram_channel_setup() 0x000108d0 <- >>>>>>>>>>> 0x00006000 >>>>>>>>>>> cx23885[0]/0: cx23885_sram_channel_setup() 0x000108e0 <- >>>>>>>>>>> 0x000062f0 >>>>>>>>>>> cx23885[0]/0: cx23885_sram_channel_setup() 0x000108f0 <- >>>>>>>>>>> 0x000065e0 >>>>>>>>>>> cx23885[0]/0: cx23885_sram_channel_setup() 0x00010900 <- >>>>>>>>>>> 0x000068d0 >>>>>>>>>>> cx23885[0]/0: cx23885_sram_channel_setup() 0x00010910 <- >>>>>>>>>>> 0x00006bc0 >>>>>>>>>>> cx23885[0]/0: [bridge 885] sram setup TS2 C: bpl=752 lines=5 >>>>>>>>>>> cx23885[0]/0: cx23885_sram_channel_setup() Erasing channel [ch7] >>>>>>>>>>> cx23885[0]/0: cx23885_sram_channel_setup() Erasing channel [ch8] >>>>>>>>>>> cx23885[0]/0: cx23885_sram_channel_setup() Erasing channel [ch9] >>>>>>>>>>> cx23885[0]: i2c bus 0 registered >>>>>>>>>>> cx23885[0]: i2c bus 1 registered >>>>>>>>>>> cx23885[0]: i2c bus 2 registered >>>>>>>>>>> >>>>>>>>>> Everything looks fine up to this point, then i2c looks bad. >>>>>>>>>> >>>>>>>>>> Can you try again with modprobe cx23885 i2c_scan=1 and post >>>>>>>>>> the output again? (Output will be large - feel free to use >>>>>>>>>> pastebin.com and post the URL here). >>>>>>>>>> >>>>>>>>> hmm, output doesn't change with it. here is a lsmod plus a >>>>>>>>> complete dmesg, is some module missing? >>>>>>>>> >>>>>>>>> http://pastebin.com/f4f9b58ed >>>>>>>>> >>>>>>>>> >>>>>>>> The module option isn't active. >>>>>>>> >>>>>>>> Unload the cx23885 module (and any dependencies) then try >>>>>>>> modprobe i2c_scan=1 >>>>>>>> >>>>>>>> When the module option is set correctly, you'll see a lot of >>>>>>>> extra debug messages. >>>>>>>> >>>>>>>> - Steve >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> hmm, I've unload all modules that sounds interesting, but there >>>>>>> is no more output: http://pastebin.com/f157a3978 >>>>>>> >>>>>> Hmm. No idea. i2c_scan is working for me and various other people. >>>>>> Something is wrong with your environment and I don't know what. >>>>>> >>>>>> The only time I've seen i2c_scan output not work, is when i2c_scan >>>>>> is not passed as a module parameter. >>>>>> >>>>>> Unload all modules, then use lsmod to ensure cx23885.ko is not >>>>>> loaded. >>>>>> Then, modprobe cx23885 debug=5 i2c_scan=1 >>>>>> >>>>>> If that doesn't show i2c device scanning traffic then I'm stumped. >>>>>> >>>>>> - Steve >>>>>> >>>>>> >>>> Thanks for the feedback. This is odd, it looks like either I2C isn;t >>>> working at all, or it's working partially for device 0x44. I think >>>> I'm tempted to believe it's not working at all. >>>> >>>> The firmware gets loaded by the cx25840 module (if required), the >>>> module is requested on the fly. But, that doesn't explain the >>>> missing eeprom errors. >>>> >>>> Does this board work under windows? >>>> >>>> - Steve >>>> >>>> >>> hmm, never tested under windows, i' windows free ;) but i will >>> install Windows now and will try wether it works.... >>> >> Try a -stable linux kernel first, linux-2.6.25-git10 might be broken. >> >> - Steve >> >> >> > too late, i've installed Windows, and the card works, not as much as i > expected, but i guess this is because i haven't the experience with > windows. Additionally i've written down the wintv output about the card, > don't know wether this interest. > > http://pastebin.com/f7aefdd0d > > tried the ubuntu kernel linux-2.6.24-16-rt, this doesn't detect, and it > doens't work with the v4l hg, now i'm building a 2.6.25 and if this > doesn't detect the card, i will try it with the v4l hg > > greetings > Torben > > _______________________________________________ > linux-dvb mailing list > linux-dvb@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > > Hey, I've update, now the dvb works with 2.6.25 ant the v4l-dvb hg, I was sure that I already tried this combinations... Now, only the analog input have to work (this was the main reason I bought this card), is it really so hard, because I saw that the HVR-1600 and the HVR-1800 is supported. greetings and many thanks Torben _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
