Steven Toth wrote: > Torben Viets wrote: >> Steven Toth wrote: >>> Torben Viets wrote: >>>> Hello, >>>> >>>> I've got it: http://pastebin.com/f50f33096 >>>> >>>> the trick was to compile the kernel (now linux-2.6.25-git13) with: >>>> >>>> CONFIG_I2C_DEBUG_CORE=y >>>> CONFIG_I2C_DEBUG_ALGO=y >>>> CONFIG_I2C_DEBUG_BUS=y >>>> CONFIG_I2C_DEBUG_CHIP=y >>>> >>>> I hope you've got an idea, i updated my bios (afters this my RAM >>>> doesn't work anymore), installed a new Ubuntu Linux hardy (8.04)... >>>> >>>> One last question when will the firmware be loaded and why there is >>>> no hotplug tool in ubuntu, or is it in the kernel? >>>> >>>> greetings >>>> Torben >>>> >>>> >>>> Steven Toth wrote: >>>>> Torben Viets wrote: >>>>>> Steven Toth wrote: >>>>>>> Torben Viets wrote: >>>>>>>> Steven Toth wrote: >>>>>>>>> Torben Viets wrote: >>>>>>>>>> Hello, >>>>>>>>>> >>>>>>>>>> thanks for the quick reply. >>>>>>>>>> >>>>>>>>>> Steven Toth wrote: >>>>>>>>>>> Torben Viets wrote: >>>>>>>>>>>> Hello, >>>>>>>>>>>> >>>>>>>>>>>> I have a Hauppauge HVR-1700 PCI Express, I have read all >>>>>>>>>>>> posts about >>>>>>>>>>>> this card here, but I didn't get it working, how does it work? >>>>>>>>>>> >>>>>>>>>>> It's working fine for me on a stock 7.10 ubuntu install. >>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> Kernel: linux-2.6.25-git10 >>>>>>>>>>>> >>>>>>>>>>>> Firmware-Files: >>>>>>>>>>>> ls -al /lib/firmware/2.6.25-git10/ >>>>>>>>>>>> total 416 >>>>>>>>>>>> drwxr-xr-x 2 root root 91 Apr 27 16:27 . >>>>>>>>>>>> drwxr-xr-x 3 root root 25 Apr 27 16:26 .. >>>>>>>>>>>> -rw-r--r-- 1 root root 24878 Apr 27 16:27 >>>>>>>>>>>> dvb-fe-tda10048-1.0.fw >>>>>>>>>>>> -r--r--r-- 1 root root 16382 Apr 27 16:27 >>>>>>>>>>>> v4l-cx23885-avcore-01.fw >>>>>>>>>>>> -r--r--r-- 1 root root 376836 Apr 27 16:26 v4l-cx23885-enc.fw >>>>>>>>>>>> >>>>>>>>>>>> The modules I use are from the actual v4l-dvb hg, if I type >>>>>>>>>>>> make load, >>>>>>>>>>>> the only thing I get is a /dev/video0, but I have no >>>>>>>>>>>> picture with xawtv... >>>>>>>>>>> >>>>>>>>>>> /dev/video doesn't work, it's not supported. >>>>>>>>>>> >>>>>>>>>> Are there any plans to support it? >>>>>>>>> >>>>>>>>> >>>>>>>>> No immediate plans. >>>>>>>>> >>>>>>>>> >>>>>>>>>>> You should aim to use the dvb-apps tools (tzap, scan) and >>>>>>>>>>> mplayer as example tools, or MythTV as an app. >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> The DVB doesn't work at all, I have no /dev/dvb*, here is >>>>>>>>>>>> my dmesg: >>>>>>>>>>>> >>>>>>>>>>>> cx23885 driver version 0.0.1 loaded >>>>>>>>>>>> ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 24 (level, low) >>>>>>>>>>>> -> IRQ 24 >>>>>>>>>>>> CORE cx23885[0]: subsystem: 0070:8101, board: Hauppauge >>>>>>>>>>>> WinTV-HVR1700 >>>>>>>>>>>> [card=8,autodetected] >>>>>>>>>>>> cx23885[0]: i2c bus 0 registered >>>>>>>>>>>> cx23885[0]: i2c bus 1 registered >>>>>>>>>>>> cx23885[0]: i2c bus 2 registered >>>>>>>>>>>> tveeprom 0-0050: Huh, no eeprom present (err=-5)? >>>>>>>>>>>> tveeprom 0-0050: Encountered bad packet header [00]. >>>>>>>>>>>> Corrupt or not a Hauppauge >>>>>>>>>>>> eeprom. >>>>>>>>>>>> cx23885[0]: warning: unknown hauppauge model #0 >>>>>>>>>>>> cx23885[0]: hauppauge eeprom: model=0 >>>>>>>>>>>> cx23885[0]: cx23885 based dvb card >>>>>>>>>>>> tda10048_readreg: readreg error (ret == -5) >>>>>>>>>>>> cx23885[0]: frontend initialization failed >>>>>>>>>>>> cx23885_dvb_register() dvb_register failed err = -1 >>>>>>>>>>>> cx23885_dev_setup() Failed to register dvb on VID_C >>>>>>>>>>>> cx23885_dev_checkrevision() New hardware revision found 0x0 >>>>>>>>>>>> cx23885_dev_checkrevision() Hardware revision unknown 0x0 >>>>>>>>>>>> cx23885[0]/0: found at 0000:02:00.0, rev: 2, irq: 24, >>>>>>>>>>>> latency: 0, mmio: >>>>>>>>>>>> 0xfe800000 >>>>>>>>>>> >>>>>>>>>>> This looks bad, it looks like i2c is broken badly, so that >>>>>>>>>>> the eeprom isn't detected and the demodulator isn't found >>>>>>>>>>> during attach. This is the reason why your missing >>>>>>>>>>> /dev/dvb/adapterX/ >>>>>>>>>>> >>>>>>>>>>> No idea why. Try loading the cx23885 with debug=5 and report >>>>>>>>>>> any log messages here - on this mailing list. >>>>>>>>>> here ist the debug=5 output >>>>>>>>>> >>>>>>>>>> cx23885[0]/0: cx23885_dev_setup() Memory configured for PCIe >>>>>>>>>> bridge type 885 >>>>>>>>>> cx23885[0]/0: cx23885_init_tsport(portno=2) >>>>>>>>>> CORE cx23885[0]: subsystem: 0070:8101, board: Hauppauge >>>>>>>>>> WinTV-HVR1700 [card=8,autodetected] >>>>>>>>>> cx23885[0]/0: cx23885_pci_quirks() >>>>>>>>>> cx23885[0]/0: cx23885_dev_setup() tuner_type = 0x0 tuner_addr >>>>>>>>>> = 0x0 >>>>>>>>>> cx23885[0]/0: cx23885_dev_setup() radio_type = 0x0 radio_addr >>>>>>>>>> = 0x0 >>>>>>>>>> cx23885[0]/0: cx23885_reset() >>>>>>>>>> cx23885[0]/0: cx23885_sram_channel_setup() Configuring >>>>>>>>>> channel [VID A] >>>>>>>>>> cx23885[0]/0: cx23885_sram_channel_setup() 0x000107b0 <- >>>>>>>>>> 0x00000040 >>>>>>>>>> cx23885[0]/0: cx23885_sram_channel_setup() 0x000107c0 <- >>>>>>>>>> 0x00000b80 >>>>>>>>>> cx23885[0]/0: cx23885_sram_channel_setup() 0x000107d0 <- >>>>>>>>>> 0x000016c0 >>>>>>>>>> cx23885[0]/0: [bridge 885] sram setup VID A: bpl=2880 lines=3 >>>>>>>>>> cx23885[0]/0: cx23885_sram_channel_setup() Erasing channel [ch2] >>>>>>>>>> cx23885[0]/0: cx23885_sram_channel_setup() Configuring >>>>>>>>>> channel [TS1 B] >>>>>>>>>> cx23885[0]/0: cx23885_sram_channel_setup() 0x00010400 <- >>>>>>>>>> 0x00005000 >>>>>>>>>> cx23885[0]/0: cx23885_sram_channel_setup() 0x00010410 <- >>>>>>>>>> 0x000052f0 >>>>>>>>>> cx23885[0]/0: cx23885_sram_channel_setup() 0x00010420 <- >>>>>>>>>> 0x000055e0 >>>>>>>>>> cx23885[0]/0: cx23885_sram_channel_setup() 0x00010430 <- >>>>>>>>>> 0x000058d0 >>>>>>>>>> cx23885[0]/0: cx23885_sram_channel_setup() 0x00010440 <- >>>>>>>>>> 0x00005bc0 >>>>>>>>>> cx23885[0]/0: [bridge 885] sram setup TS1 B: bpl=752 lines=5 >>>>>>>>>> cx23885[0]/0: cx23885_sram_channel_setup() Erasing channel [ch4] >>>>>>>>>> cx23885[0]/0: cx23885_sram_channel_setup() Erasing channel [ch5] >>>>>>>>>> cx23885[0]/0: cx23885_sram_channel_setup() Configuring >>>>>>>>>> channel [TS2 C] >>>>>>>>>> cx23885[0]/0: cx23885_sram_channel_setup() 0x000108d0 <- >>>>>>>>>> 0x00006000 >>>>>>>>>> cx23885[0]/0: cx23885_sram_channel_setup() 0x000108e0 <- >>>>>>>>>> 0x000062f0 >>>>>>>>>> cx23885[0]/0: cx23885_sram_channel_setup() 0x000108f0 <- >>>>>>>>>> 0x000065e0 >>>>>>>>>> cx23885[0]/0: cx23885_sram_channel_setup() 0x00010900 <- >>>>>>>>>> 0x000068d0 >>>>>>>>>> cx23885[0]/0: cx23885_sram_channel_setup() 0x00010910 <- >>>>>>>>>> 0x00006bc0 >>>>>>>>>> cx23885[0]/0: [bridge 885] sram setup TS2 C: bpl=752 lines=5 >>>>>>>>>> cx23885[0]/0: cx23885_sram_channel_setup() Erasing channel [ch7] >>>>>>>>>> cx23885[0]/0: cx23885_sram_channel_setup() Erasing channel [ch8] >>>>>>>>>> cx23885[0]/0: cx23885_sram_channel_setup() Erasing channel [ch9] >>>>>>>>>> cx23885[0]: i2c bus 0 registered >>>>>>>>>> cx23885[0]: i2c bus 1 registered >>>>>>>>>> cx23885[0]: i2c bus 2 registered >>>>>>>>> >>>>>>>>> Everything looks fine up to this point, then i2c looks bad. >>>>>>>>> >>>>>>>>> Can you try again with modprobe cx23885 i2c_scan=1 and post >>>>>>>>> the output again? (Output will be large - feel free to use >>>>>>>>> pastebin.com and post the URL here). >>>>>>>> >>>>>>>> hmm, output doesn't change with it. here is a lsmod plus a >>>>>>>> complete dmesg, is some module missing? >>>>>>>> >>>>>>>> http://pastebin.com/f4f9b58ed >>>>>>>> >>>>>>> >>>>>>> The module option isn't active. >>>>>>> >>>>>>> Unload the cx23885 module (and any dependencies) then try >>>>>>> modprobe i2c_scan=1 >>>>>>> >>>>>>> When the module option is set correctly, you'll see a lot of >>>>>>> extra debug messages. >>>>>>> >>>>>>> - Steve >>>>>>> >>>>>>> >>>>>> >>>>>> hmm, I've unload all modules that sounds interesting, but there >>>>>> is no more output: http://pastebin.com/f157a3978 >>>>> >>>>> Hmm. No idea. i2c_scan is working for me and various other people. >>>>> Something is wrong with your environment and I don't know what. >>>>> >>>>> The only time I've seen i2c_scan output not work, is when i2c_scan >>>>> is not passed as a module parameter. >>>>> >>>>> Unload all modules, then use lsmod to ensure cx23885.ko is not >>>>> loaded. >>>>> Then, modprobe cx23885 debug=5 i2c_scan=1 >>>>> >>>>> If that doesn't show i2c device scanning traffic then I'm stumped. >>>>> >>>>> - Steve >>>>> >>>> >>> >>> Thanks for the feedback. This is odd, it looks like either I2C isn;t >>> working at all, or it's working partially for device 0x44. I think >>> I'm tempted to believe it's not working at all. >>> >>> The firmware gets loaded by the cx25840 module (if required), the >>> module is requested on the fly. But, that doesn't explain the >>> missing eeprom errors. >>> >>> Does this board work under windows? >>> >>> - Steve >>> >> hmm, never tested under windows, i' windows free ;) but i will >> install Windows now and will try wether it works.... > > Try a -stable linux kernel first, linux-2.6.25-git10 might be broken. > > - Steve > > too late, i've installed Windows, and the card works, not as much as i expected, but i guess this is because i haven't the experience with windows. Additionally i've written down the wintv output about the card, don't know wether this interest. http://pastebin.com/f7aefdd0d tried the ubuntu kernel linux-2.6.24-16-rt, this doesn't detect, and it doens't work with the v4l hg, now i'm building a 2.6.25 and if this doesn't detect the card, i will try it with the v4l hg greetings Torben _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
