Torben Viets wrote: > Hello, > > I have a Hauppauge HVR-1700 PCI Express, I have read all posts about > this card here, but I didn't get it working, how does it work? It's working fine for me on a stock 7.10 ubuntu install. > > Kernel: linux-2.6.25-git10 > > Firmware-Files: > ls -al /lib/firmware/2.6.25-git10/ > total 416 > drwxr-xr-x 2 root root 91 Apr 27 16:27 . > drwxr-xr-x 3 root root 25 Apr 27 16:26 .. > -rw-r--r-- 1 root root 24878 Apr 27 16:27 dvb-fe-tda10048-1.0.fw > -r--r--r-- 1 root root 16382 Apr 27 16:27 v4l-cx23885-avcore-01.fw > -r--r--r-- 1 root root 376836 Apr 27 16:26 v4l-cx23885-enc.fw > > The modules I use are from the actual v4l-dvb hg, if I type make load, > the only thing I get is a /dev/video0, but I have no picture with xawtv... /dev/video doesn't work, it's not supported. You should aim to use the dvb-apps tools (tzap, scan) and mplayer as example tools, or MythTV as an app. > > The DVB doesn't work at all, I have no /dev/dvb*, here is my dmesg: > > cx23885 driver version 0.0.1 loaded > ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 24 (level, low) -> IRQ 24 > CORE cx23885[0]: subsystem: 0070:8101, board: Hauppauge WinTV-HVR1700 > [card=8,autodetected] > cx23885[0]: i2c bus 0 registered > cx23885[0]: i2c bus 1 registered > cx23885[0]: i2c bus 2 registered > tveeprom 0-0050: Huh, no eeprom present (err=-5)? > tveeprom 0-0050: Encountered bad packet header [00]. > Corrupt or not a Hauppauge > eeprom. > cx23885[0]: warning: unknown hauppauge model #0 > cx23885[0]: hauppauge eeprom: model=0 > cx23885[0]: cx23885 based dvb card > tda10048_readreg: readreg error (ret == -5) > cx23885[0]: frontend initialization failed > cx23885_dvb_register() dvb_register failed err = -1 > cx23885_dev_setup() Failed to register dvb on VID_C > cx23885_dev_checkrevision() New hardware revision found 0x0 > cx23885_dev_checkrevision() Hardware revision unknown 0x0 > cx23885[0]/0: found at 0000:02:00.0, rev: 2, irq: 24, latency: 0, mmio: > 0xfe800000 This looks bad, it looks like i2c is broken badly, so that the eeprom isn't detected and the demodulator isn't found during attach. This is the reason why your missing /dev/dvb/adapterX/ No idea why. Try loading the cx23885 with debug=5 and report any log messages here - on this mailing list. Steve _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
