Steven Toth wrote: > Torben Viets wrote: >> Steven Toth wrote: >>> Torben Viets wrote: >>>> Hello, >>>> >>>> thanks for the quick reply. >>>> >>>> Steven Toth wrote: >>>>> Torben Viets wrote: >>>>>> Hello, >>>>>> >>>>>> I have a Hauppauge HVR-1700 PCI Express, I have read all posts about >>>>>> this card here, but I didn't get it working, how does it work? >>>>> >>>>> It's working fine for me on a stock 7.10 ubuntu install. >>>>> >>>>>> >>>>>> Kernel: linux-2.6.25-git10 >>>>>> >>>>>> Firmware-Files: >>>>>> ls -al /lib/firmware/2.6.25-git10/ >>>>>> total 416 >>>>>> drwxr-xr-x 2 root root 91 Apr 27 16:27 . >>>>>> drwxr-xr-x 3 root root 25 Apr 27 16:26 .. >>>>>> -rw-r--r-- 1 root root 24878 Apr 27 16:27 dvb-fe-tda10048-1.0.fw >>>>>> -r--r--r-- 1 root root 16382 Apr 27 16:27 v4l-cx23885-avcore-01.fw >>>>>> -r--r--r-- 1 root root 376836 Apr 27 16:26 v4l-cx23885-enc.fw >>>>>> >>>>>> The modules I use are from the actual v4l-dvb hg, if I type make >>>>>> load, >>>>>> the only thing I get is a /dev/video0, but I have no picture with >>>>>> xawtv... >>>>> >>>>> /dev/video doesn't work, it's not supported. >>>>> >>>> Are there any plans to support it? >>> >>> >>> No immediate plans. >>> >>> >>>>> You should aim to use the dvb-apps tools (tzap, scan) and mplayer >>>>> as example tools, or MythTV as an app. >>>>> >>>>> >>>>>> >>>>>> The DVB doesn't work at all, I have no /dev/dvb*, here is my dmesg: >>>>>> >>>>>> cx23885 driver version 0.0.1 loaded >>>>>> ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 24 (level, low) -> IRQ 24 >>>>>> CORE cx23885[0]: subsystem: 0070:8101, board: Hauppauge >>>>>> WinTV-HVR1700 >>>>>> [card=8,autodetected] >>>>>> cx23885[0]: i2c bus 0 registered >>>>>> cx23885[0]: i2c bus 1 registered >>>>>> cx23885[0]: i2c bus 2 registered >>>>>> tveeprom 0-0050: Huh, no eeprom present (err=-5)? >>>>>> tveeprom 0-0050: Encountered bad packet header [00]. >>>>>> Corrupt or not a Hauppauge >>>>>> eeprom. >>>>>> cx23885[0]: warning: unknown hauppauge model #0 >>>>>> cx23885[0]: hauppauge eeprom: model=0 >>>>>> cx23885[0]: cx23885 based dvb card >>>>>> tda10048_readreg: readreg error (ret == -5) >>>>>> cx23885[0]: frontend initialization failed >>>>>> cx23885_dvb_register() dvb_register failed err = -1 >>>>>> cx23885_dev_setup() Failed to register dvb on VID_C >>>>>> cx23885_dev_checkrevision() New hardware revision found 0x0 >>>>>> cx23885_dev_checkrevision() Hardware revision unknown 0x0 >>>>>> cx23885[0]/0: found at 0000:02:00.0, rev: 2, irq: 24, latency: 0, >>>>>> mmio: >>>>>> 0xfe800000 >>>>> >>>>> This looks bad, it looks like i2c is broken badly, so that the >>>>> eeprom isn't detected and the demodulator isn't found during >>>>> attach. This is the reason why your missing /dev/dvb/adapterX/ >>>>> >>>>> No idea why. Try loading the cx23885 with debug=5 and report any >>>>> log messages here - on this mailing list. >>>> here ist the debug=5 output >>>> >>>> cx23885[0]/0: cx23885_dev_setup() Memory configured for PCIe bridge >>>> type 885 >>>> cx23885[0]/0: cx23885_init_tsport(portno=2) >>>> CORE cx23885[0]: subsystem: 0070:8101, board: Hauppauge >>>> WinTV-HVR1700 [card=8,autodetected] >>>> cx23885[0]/0: cx23885_pci_quirks() >>>> cx23885[0]/0: cx23885_dev_setup() tuner_type = 0x0 tuner_addr = 0x0 >>>> cx23885[0]/0: cx23885_dev_setup() radio_type = 0x0 radio_addr = 0x0 >>>> cx23885[0]/0: cx23885_reset() >>>> cx23885[0]/0: cx23885_sram_channel_setup() Configuring channel [VID A] >>>> cx23885[0]/0: cx23885_sram_channel_setup() 0x000107b0 <- 0x00000040 >>>> cx23885[0]/0: cx23885_sram_channel_setup() 0x000107c0 <- 0x00000b80 >>>> cx23885[0]/0: cx23885_sram_channel_setup() 0x000107d0 <- 0x000016c0 >>>> cx23885[0]/0: [bridge 885] sram setup VID A: bpl=2880 lines=3 >>>> cx23885[0]/0: cx23885_sram_channel_setup() Erasing channel [ch2] >>>> cx23885[0]/0: cx23885_sram_channel_setup() Configuring channel [TS1 B] >>>> cx23885[0]/0: cx23885_sram_channel_setup() 0x00010400 <- 0x00005000 >>>> cx23885[0]/0: cx23885_sram_channel_setup() 0x00010410 <- 0x000052f0 >>>> cx23885[0]/0: cx23885_sram_channel_setup() 0x00010420 <- 0x000055e0 >>>> cx23885[0]/0: cx23885_sram_channel_setup() 0x00010430 <- 0x000058d0 >>>> cx23885[0]/0: cx23885_sram_channel_setup() 0x00010440 <- 0x00005bc0 >>>> cx23885[0]/0: [bridge 885] sram setup TS1 B: bpl=752 lines=5 >>>> cx23885[0]/0: cx23885_sram_channel_setup() Erasing channel [ch4] >>>> cx23885[0]/0: cx23885_sram_channel_setup() Erasing channel [ch5] >>>> cx23885[0]/0: cx23885_sram_channel_setup() Configuring channel [TS2 C] >>>> cx23885[0]/0: cx23885_sram_channel_setup() 0x000108d0 <- 0x00006000 >>>> cx23885[0]/0: cx23885_sram_channel_setup() 0x000108e0 <- 0x000062f0 >>>> cx23885[0]/0: cx23885_sram_channel_setup() 0x000108f0 <- 0x000065e0 >>>> cx23885[0]/0: cx23885_sram_channel_setup() 0x00010900 <- 0x000068d0 >>>> cx23885[0]/0: cx23885_sram_channel_setup() 0x00010910 <- 0x00006bc0 >>>> cx23885[0]/0: [bridge 885] sram setup TS2 C: bpl=752 lines=5 >>>> cx23885[0]/0: cx23885_sram_channel_setup() Erasing channel [ch7] >>>> cx23885[0]/0: cx23885_sram_channel_setup() Erasing channel [ch8] >>>> cx23885[0]/0: cx23885_sram_channel_setup() Erasing channel [ch9] >>>> cx23885[0]: i2c bus 0 registered >>>> cx23885[0]: i2c bus 1 registered >>>> cx23885[0]: i2c bus 2 registered >>> >>> Everything looks fine up to this point, then i2c looks bad. >>> >>> Can you try again with modprobe cx23885 i2c_scan=1 and post the >>> output again? (Output will be large - feel free to use pastebin.com >>> and post the URL here). >> >> hmm, output doesn't change with it. here is a lsmod plus a complete >> dmesg, is some module missing? >> >> http://pastebin.com/f4f9b58ed >> > > The module option isn't active. > > Unload the cx23885 module (and any dependencies) then try modprobe > i2c_scan=1 > > When the module option is set correctly, you'll see a lot of extra > debug messages. > > - Steve > > hmm, I've unload all modules that sounds interesting, but there is no more output: http://pastebin.com/f157a3978 greetings Torben _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
