Hi all,
On Tue, 2008-03-18 at 22:31 +0100, hermann pitton wrote:
> Hi,
>
> Am Dienstag, den 18.03.2008, 18:04 -0300 schrieb Mauro Carvalho Chehab:
> > On Wed, 19 Mar 2008 05:48:52 +0900
> > timf <timf@xxxxxxxxxxxx> wrote:
> >
> > > 1) New install ubuntu, extract tip.tgz.
> >
> > There's no need for you to reinstall Linux for each test. This is not MS**t ;)
> >
> > You don't even need to reboot.
> >
> > > [ 40.753552] saa7133[0]: i2c scan: found device @ 0xc2 [???]
> > > [ 40.864616] tuner' 2-0061: Setting mode_mask to 0x0e
> > > [ 40.864621] tuner' 2-0061: chip found @ 0xc2 (saa7133[0])
> > > [ 40.864624] tuner' 2-0061: tuner 0x61: Tuner type absent
> > > [ 40.864658] tuner' 2-0061: Calling set_type_addr for type=0,
> > > addr=0xff, mode=0x02, config=0xffff8100
>
> any idea somebody when that was introduced?
>
> [ 40.753552] saa7133[0]: i2c scan: found device @ 0xc2 [???]
> [ 40.864616] tuner' 2-0061: Setting mode_mask to 0x0e
> [ 40.864621] tuner' 2-0061: chip found @ 0xc2 (saa7133[0])
> [ 40.864624] tuner' 2-0061: tuner 0x61: Tuner type absent
> [ 40.864658] tuner' 2-0061: Calling set_type_addr for type=0,
> addr=0xff, mode=0x02, config=0xffff8100
> [ 40.864662] tuner' 2-0061: set addr for type -1
> [ 40.876586] tuner-simple 2-0061: creating new instance
> [ 40.876589] tuner-simple 2-0061: type set to 0 (Temic PAL (4002 FH5))
>
> Out of historical cruft TUNER_ABSENT is tuner type 4.
>
> > mode=0x02 is radio.
> >
> > Try to add this to the struct:
> >
> > .radio_type = UNSET,
> >
> > > 3) No DVB, installed tvtime - no signal.
> >
> > DVB won't work yet. What the demod inside this board? There's no setup for it.
>
> Cheers,
> Hermann
>
Nope, could't get anything to work.
- blacklisted tuner_xc3028 - no diff still locked up at boot
- dbg - no module loaded
$%#!!! it - reinstalled; Gee it took ages for clone hg linuxtv to
download - 3kbs at best???
1) no updates, no nvidia-glx-new (prop) (thus no 1680 x 1050 - looks
awful, nv can't do that res)
- looked in saa7134-cards.c
only this patch:
},
[SAA7134_BOARD_AVERMEDIA_A16D] = {
.name = "AVerMedia Hybrid TV/Radio (A16D)",
.audio_clock = 0x187de7,
.tuner_type = TUNER_XC2028,
.tuner_addr = ADDR_UNSET,
.inputs = {{
.name = name_tv,
.vmux = 1,
.amux = TV,
.tv = 1,
}, {
.name = name_svideo,
.vmux = 8,
.amux = LINE1,
} },
.radio = {
.name = name_radio,
.amux = LINE1,
},
},
[SAA7134_BOARD_AVERMEDIA_M115] = {
- make, sudo make install v4l-dvb, reboot
- no /dev/video#
- no soundcard detected??? -> no volume control
dmesg
<snip>
[ 40.108132] Linux video capture interface: v2.00
[ 40.146196] saa7130/34: v4l2 driver version 0.2.14 loaded
[ 40.147238] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 40.147249] ACPI: PCI Interrupt 0000:04:09.0[A] -> Link [APC2] -> GSI
17 (level, low) -> IRQ 17
[ 40.147258] saa7133[0]: found at 0000:04:09.0, rev: 209, irq: 17,
latency: 32, mmio: 0xfdbff000
[ 40.147265] saa7133[0]: subsystem: 1461:f936, board: AVerMedia Hybrid
TV/Radio (A16D) [card=137,autodetected]
[ 40.147275] saa7133[0]: board init: gpio is 2fe00
[ 40.308263] saa7133[0]: i2c eeprom 00: 61 14 36 f9 00 00 00 00 00 00
00 00 00 00 00 00
[ 40.308273] saa7133[0]: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff
ff ff ff ff ff ff
[ 40.308282] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 01 00 08 ff
00 0e ff ff ff ff
[ 40.308290] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 40.308298] saa7133[0]: i2c eeprom 40: ff 65 00 ff c2 1e ff ff ff ff
ff ff ff ff ff ff
[ 40.308306] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 40.308314] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 40.308322] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 40.308330] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 40.308338] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 40.308347] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 40.308355] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 40.308363] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 40.308371] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 40.308379] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 40.308388] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 40.320255] saa7133[0]: i2c scan: found device @ 0x1e [???]
[ 40.340220] saa7133[0]: i2c scan: found device @ 0xa0 [eeprom]
[ 40.451576] saa7133[0]: registered device video0 [v4l2]
[ 40.451617] saa7133[0]: registered device vbi0
[ 40.451653] saa7133[0]: registered device radio0
[ 40.452183] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
[ 40.452187] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [AAZA] -> GSI
22 (level, low) -> IRQ 22
[ 40.452421] PCI: Setting latency timer of device 0000:00:10.1 to 64
[ 40.464285] saa7134 ALSA driver for DMA sound loaded
[ 40.464316] saa7133[0]/alsa: saa7133[0] at 0xfdbff000 irq 17
registered as card -2
<snip>
That's all!
2) Put other patch in:
case SAA7134_BOARD_AVERMEDIA_CARDBUS_506:
case SAA7134_BOARD_AVERMEDIA_M115:
case SAA7134_BOARD_BEHOLD_COLUMBUS_TVFM:
+ case SAA7134_BOARD_AVERMEDIA_A16D:
/* power-up tuner chip */
saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0xffffffff, 0xffffffff);
saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0xffffffff, 0xffffffff);
- make, sudo make install v4l-dvb, reboot
- still no /dev/video#
- still no soundcard detected??? -> no volume control
dmesg
<snip>
[ 37.052833] Linux video capture interface: v2.00
[ 37.088234] parport_pc 00:08: reported by Plug and Play ACPI
[ 37.088328] parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 37.091985] hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB
Cache, UDMA(66)
[ 37.091993] Uniform CD-ROM driver Revision: 3.20
[ 37.127981] saa7130/34: v4l2 driver version 0.2.14 loaded
[ 37.129041] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 37.129053] ACPI: PCI Interrupt 0000:04:09.0[A] -> Link [APC2] -> GSI
17 (level, low) -> IRQ 17
[ 37.129063] saa7133[0]: found at 0000:04:09.0, rev: 209, irq: 17,
latency: 32, mmio: 0xfdbff000
[ 37.129069] saa7133[0]: subsystem: 1461:f936, board: AVerMedia Hybrid
TV/Radio (A16D) [card=137,autodetected]
[ 37.129080] saa7133[0]: board init: gpio is 2fe00
[ 37.301262] saa7133[0]: i2c eeprom 00: 61 14 36 f9 00 00 00 00 00 00
00 00 00 00 00 00
[ 37.301272] saa7133[0]: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff
ff ff ff ff ff ff
[ 37.301281] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 01 00 08 ff
00 0e ff ff ff ff
[ 37.301288] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 37.301297] saa7133[0]: i2c eeprom 40: ff 65 00 ff c2 1e ff ff ff ff
ff ff ff ff ff ff
[ 37.301305] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 37.301312] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 37.301320] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 37.301328] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 37.301336] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 37.301344] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 37.301352] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 37.301360] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 37.301368] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 37.301376] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 37.301384] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 37.321227] saa7133[0]: i2c scan: found device @ 0xa0 [eeprom]
[ 37.333208] saa7133[0]: i2c scan: found device @ 0xc2 [???]
[ 37.417690] tuner' 2-0061: Setting mode_mask to 0x0e
[ 37.417696] tuner' 2-0061: chip found @ 0xc2 (saa7133[0])
[ 37.417699] tuner' 2-0061: tuner 0x61: Tuner type absent
[ 37.417734] tuner' 2-0061: Calling set_type_addr for type=71,
addr=0xff, mode=0x04, config=0x00
[ 37.417737] tuner' 2-0061: set addr for type -1
[ 37.417739] tuner' 2-0061: defining GPIO callback
[ 37.417742] xc2028: Xcv2028/3028 init called!
[ 37.417745] xc2028 2-0061: type set to XCeive xc2028/xc3028 tuner
[ 37.417748] tuner' 2-0061: type set to Xceive XC3028
[ 37.417751] tuner' 2-0061: tv freq set to 400.00
[ 37.417753] xc2028 2-0061: xc2028_set_analog_freq called
[ 37.417756] xc2028 2-0061: generic_set_freq called
[ 37.417759] xc2028 2-0061: should set frequency 400000 kHz
[ 37.417761] xc2028 2-0061: check_firmware called
[ 37.417763] xc2028 2-0061: xc2028/3028 firmware name not set!
[ 37.417767] tuner' 2-0061: saa7133[0] tuner' I2C addr 0xc2 with type
71 used for 0x0e
[ 37.419545] xc2028 2-0061: xc2028_set_config called
[ 37.419553] tuner' 2-0061: switching to v4l2
[ 37.419557] tuner' 2-0061: tv freq set to 400.00
[ 37.419560] xc2028 2-0061: xc2028_set_analog_freq called
[ 37.419563] xc2028 2-0061: generic_set_freq called
[ 37.419565] xc2028 2-0061: should set frequency 400000 kHz
[ 37.419568] xc2028 2-0061: check_firmware called
[ 37.419570] xc2028 2-0061: load_all_firmwares called
[ 37.419572] xc2028 2-0061: Reading firmware xc3028-v27.fw
[ 37.456770] xc2028 2-0061: Loading 80 firmware images from
xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[ 37.456783] xc2028 2-0061: Reading firmware type BASE F8MHZ (3), id
0, size=8718.
[ 37.456798] xc2028 2-0061: Reading firmware type BASE F8MHZ MTS (7),
id 0, size=8712.
[ 37.456812] xc2028 2-0061: Reading firmware type BASE FM (401), id 0,
size=8562.
[ 37.456827] xc2028 2-0061: Reading firmware type BASE FM INPUT1
(c01), id 0, size=8576.
[ 37.456841] xc2028 2-0061: Reading firmware type BASE (1), id 0,
size=8706.
[ 37.456855] xc2028 2-0061: Reading firmware type BASE MTS (5), id 0,
size=8682.
[ 37.456864] xc2028 2-0061: Reading firmware type (0), id 100000007,
size=161.
[ 37.456867] xc2028 2-0061: Reading firmware type MTS (4), id
100000007, size=169.
[ 37.456872] xc2028 2-0061: Reading firmware type (0), id 200000007,
size=161.
[ 37.456875] xc2028 2-0061: Reading firmware type MTS (4), id
200000007, size=169.
[ 37.456879] xc2028 2-0061: Reading firmware type (0), id 400000007,
size=161.
[ 37.456882] xc2028 2-0061: Reading firmware type MTS (4), id
400000007, size=169.
[ 37.456887] xc2028 2-0061: Reading firmware type (0), id 800000007,
size=161.
[ 37.456890] xc2028 2-0061: Reading firmware type MTS (4), id
800000007, size=169.
[ 37.456895] xc2028 2-0061: Reading firmware type (0), id 3000000e0,
size=161.
[ 37.456898] xc2028 2-0061: Reading firmware type MTS (4), id
3000000e0, size=169.
[ 37.456902] xc2028 2-0061: Reading firmware type (0), id c000000e0,
size=161.
[ 37.456905] xc2028 2-0061: Reading firmware type MTS (4), id
c000000e0, size=169.
[ 37.456910] xc2028 2-0061: Reading firmware type (0), id 200000,
size=161.
[ 37.456913] xc2028 2-0061: Reading firmware type MTS (4), id 200000,
size=169.
[ 37.456917] xc2028 2-0061: Reading firmware type (0), id 4000000,
size=161.
[ 37.456920] xc2028 2-0061: Reading firmware type MTS (4), id 4000000,
size=169.
[ 37.456924] xc2028 2-0061: Reading firmware type D2633 DTV6 ATSC
(10030), id 0, size=149.
[ 37.456928] xc2028 2-0061: Reading firmware type D2620 DTV6 QAM (68),
id 0, size=149.
[ 37.456932] xc2028 2-0061: Reading firmware type D2633 DTV6 QAM (70),
id 0, size=149.
[ 37.456938] xc2028 2-0061: Reading firmware type D2620 DTV7 (88), id
0, size=149.
[ 37.456942] xc2028 2-0061: Reading firmware type D2633 DTV7 (90), id
0, size=149.
[ 37.456946] xc2028 2-0061: Reading firmware type D2620 DTV78 (108),
id 0, size=149.
[ 37.456951] xc2028 2-0061: Reading firmware type D2633 DTV78 (110),
id 0, size=149.
[ 37.456954] xc2028 2-0061: Reading firmware type D2620 DTV8 (208), id
0, size=149.
[ 37.456958] xc2028 2-0061: Reading firmware type D2633 DTV8 (210), id
0, size=149.
[ 37.456963] xc2028 2-0061: Reading firmware type FM (400), id 0,
size=135.
[ 37.456966] xc2028 2-0061: Reading firmware type (0), id 10,
size=161.
[ 37.456969] xc2028 2-0061: Reading firmware type MTS (4), id 10,
size=169.
[ 37.456973] xc2028 2-0061: Reading firmware type (0), id 1000400000,
size=169.
[ 37.456977] xc2028 2-0061: Reading firmware type (0), id c00400000,
size=161.
[ 37.456980] xc2028 2-0061: Reading firmware type (0), id 800000,
size=161.
[ 37.456984] xc2028 2-0061: Reading firmware type (0), id 8000,
size=161.
[ 37.456987] xc2028 2-0061: Reading firmware type LCD (1000), id 8000,
size=161.
[ 37.456991] xc2028 2-0061: Reading firmware type LCD NOGD (3000), id
8000, size=161.
[ 37.456995] xc2028 2-0061: Reading firmware type MTS (4), id 8000,
size=169.
[ 37.456999] xc2028 2-0061: Reading firmware type (0), id b700,
size=161.
[ 37.457002] xc2028 2-0061: Reading firmware type LCD (1000), id b700,
size=161.
[ 37.457006] xc2028 2-0061: Reading firmware type LCD NOGD (3000), id
b700, size=161.
[ 37.457010] xc2028 2-0061: Reading firmware type (0), id 2000,
size=161.
[ 37.457013] xc2028 2-0061: Reading firmware type MTS (4), id b700,
size=169.
[ 37.457021] xc2028 2-0061: Reading firmware type MTS LCD (1004), id
b700, size=169.
[ 37.457025] xc2028 2-0061: Reading firmware type MTS LCD NOGD (3004),
id b700, size=169.
[ 37.457029] xc2028 2-0061: Reading firmware type SCODE HAS_IF_3280
(60000000), id 0, size=192.
[ 37.457034] xc2028 2-0061: Reading firmware type SCODE HAS_IF_3300
(60000000), id 0, size=192.
[ 37.457039] xc2028 2-0061: Reading firmware type SCODE HAS_IF_3440
(60000000), id 0, size=192.
[ 37.457043] xc2028 2-0061: Reading firmware type SCODE HAS_IF_3460
(60000000), id 0, size=192.
[ 37.457047] xc2028 2-0061: Reading firmware type DTV6 ATSC OREN36
SCODE HAS_IF_3800 (60210020), id 0, size=192.
[ 37.457053] xc2028 2-0061: Reading firmware type SCODE HAS_IF_4000
(60000000), id 0, size=192.
[ 37.457057] xc2028 2-0061: Reading firmware type DTV6 ATSC TOYOTA388
SCODE HAS_IF_4080 (60410020), id 0, size=192.
[ 37.457063] xc2028 2-0061: Reading firmware type SCODE HAS_IF_4200
(60000000), id 0, size=192.
[ 37.457067] xc2028 2-0061: Reading firmware type MONO SCODE
HAS_IF_4320 (60008000), id 8000, size=192.
[ 37.457072] xc2028 2-0061: Reading firmware type SCODE HAS_IF_4450
(60000000), id 0, size=192.
[ 37.457077] xc2028 2-0061: Reading firmware type SCODE HAS_IF_4500
(60000000), id 2000, size=192.
[ 37.457081] xc2028 2-0061: Reading firmware type LCD NOGD IF SCODE
HAS_IF_4600 (60023000), id 8000, size=192.
[ 37.457087] xc2028 2-0061: Reading firmware type DTV78 ZARLINK456
SCODE HAS_IF_4760 (62000100), id 0, size=192.
[ 37.457092] xc2028 2-0061: Reading firmware type SCODE HAS_IF_4940
(60000000), id 0, size=192.
[ 37.457096] xc2028 2-0061: Reading firmware type DTV7 ZARLINK456
SCODE HAS_IF_5260 (62000080), id 0, size=192.
[ 37.457101] xc2028 2-0061: Reading firmware type MONO SCODE
HAS_IF_5320 (60008000), id 800000007, size=192.
[ 37.457107] xc2028 2-0061: Reading firmware type DTV8 CHINA SCODE
HAS_IF_5400 (64000200), id 0, size=192.
[ 37.457111] xc2028 2-0061: Reading firmware type DTV6 ATSC OREN538
SCODE HAS_IF_5580 (60110020), id 0, size=192.
[ 37.457117] xc2028 2-0061: Reading firmware type SCODE HAS_IF_5640
(60000000), id 200000007, size=192.
[ 37.457124] xc2028 2-0061: Reading firmware type SCODE HAS_IF_5740
(60000000), id 800000007, size=192.
[ 37.457129] xc2028 2-0061: Reading firmware type DTV7 DIBCOM52 SCODE
HAS_IF_5900 (61000080), id 0, size=192.
[ 37.457134] xc2028 2-0061: Reading firmware type MONO SCODE
HAS_IF_6000 (60008000), id 10, size=192.
[ 37.457139] xc2028 2-0061: Reading firmware type DTV6 QAM F6MHZ SCODE
HAS_IF_6200 (68000060), id 0, size=192.
[ 37.457144] xc2028 2-0061: Reading firmware type SCODE HAS_IF_6240
(60000000), id 10, size=192.
[ 37.457149] xc2028 2-0061: Reading firmware type MONO SCODE
HAS_IF_6320 (60008000), id 200000, size=192.
[ 37.457154] xc2028 2-0061: Reading firmware type SCODE HAS_IF_6340
(60000000), id 200000, size=192.
[ 37.457159] xc2028 2-0061: Reading firmware type MONO SCODE
HAS_IF_6500 (60008000), id 4000000, size=192.
[ 37.457164] xc2028 2-0061: Reading firmware type DTV6 ATSC ATI638
SCODE HAS_IF_6580 (60090020), id 0, size=192.
[ 37.457169] xc2028 2-0061: Reading firmware type SCODE HAS_IF_6600
(60000000), id 3000000e0, size=192.
[ 37.457174] xc2028 2-0061: Reading firmware type MONO SCODE
HAS_IF_6680 (60008000), id 3000000e0, size=192.
[ 37.457180] xc2028 2-0061: Reading firmware type DTV6 ATSC TOYOTA794
SCODE HAS_IF_8140 (60810020), id 0, size=192.
[ 37.457185] xc2028 2-0061: Reading firmware type SCODE HAS_IF_8200
(60000000), id 0, size=192.
[ 37.457201] xc2028 2-0061: Firmware files loaded.
[ 37.457203] xc2028 2-0061: checking firmware, user requested
type=F8MHZ MTS (6), id 00000000000000ff, scode_tbl (0), scode_nr 0
[ 37.457229] Unable to handle kernel NULL pointer dereference at
00000000000001c4 RIP:
[ 37.457232] [<ffffffff88255839>] :saa7134:saa7134_tuner_callback
+0x9/0x190
[ 37.457255] PGD 65f26067 PUD 66a9e067 PMD 0
[ 37.457259] Oops: 0000 [1] SMP
[ 37.457262] CPU 0
[ 37.457264] Modules linked in: tuner tea5767 tda8290 tda18271 tda827x
tuner_xc2028 xc5000 tda9887 tuner_simple tuner_types mt20xx tea5761
snd_hda_intel snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy
snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event saa7134 snd_seq
parport_pc ide_cd cdrom snd_timer snd_seq_device compat_ioctl32 videodev
v4l1_compat v4l2_common videobuf_dma_sg videobuf_core ir_kbd_i2c
ir_common tveeprom xpad pcspkr psmouse parport snd soundcore
snd_page_alloc i2c_nforce2 serio_raw k8temp i2c_core shpchp pci_hotplug
evdev ext3 jbd mbcache sg sd_mod amd74xx ide_core usbhid hid forcedeth
sata_nv ata_generic libata scsi_mod ohci_hcd ehci_hcd usbcore thermal
processor fan fuse apparmor commoncap
[ 37.457305] Pid: 3942, comm: modprobe Not tainted 2.6.22-14-generic
#1
[ 37.457308] RIP: 0010:[<ffffffff88255839>]
[<ffffffff88255839>] :saa7134:saa7134_tuner_callback+0x9/0x190
[ 37.457321] RSP: 0018:ffff810065c65a38 EFLAGS: 00010292
[ 37.457323] RAX: 0000000000000007 RBX: 0000000000000001 RCX:
0000000000000000
[ 37.457326] RDX: 0000000000000000 RSI: 0000000000000000 RDI:
0000000000000000
[ 37.457329] RBP: ffff81006c2e6600 R08: 000000000000904b R09:
0000000000000007
[ 37.457331] R10: 0000000000000000 R11: 0000000000000001 R12:
0000000000000000
[ 37.457334] R13: ffff81006c2e6678 R14: 0000000000000001 R15:
0000000000000001
[ 37.457338] FS: 00002ad17e0376e0(0000) GS:ffffffff80560000(0000)
knlGS:0000000000000000
[ 37.457341] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 37.457344] CR2: 00000000000001c4 CR3: 0000000067900000 CR4:
00000000000006e0
[ 37.457348] Process modprobe (pid: 3942, threadinfo ffff810065c64000,
task ffff810037e02dc0)
[ 37.457350] Stack: ffff81006c2e6600 ffffffff8833c803
ffff810065c65b08 ffff810000000002
[ 37.457358] ffff810000000007 ffff81006d7db000 ffff81006d7db270
00000000000000ff
[ 37.457363] 000000066d7db170 17d7840000000004 ffff81006d7db000
ffff81006c2e66a0
[ 37.457368] Call Trace:
[ 37.457375] [<ffffffff8833c803>] :tuner_xc2028:generic_set_freq
+0x593/0x1830
[ 37.457393] [<ffffffff802361fe>] printk+0x4e/0x60
[ 37.457408] [<ffffffff8835aa4e>] :tuner:set_tv_freq+0xae/0x1c0
[ 37.457417] [<ffffffff8835abd1>] :tuner:set_freq+0x71/0x1a0
[ 37.457423] [<ffffffff8835bfe8>] :tuner:tuner_command+0x198/0x12f0
[ 37.457439] [<ffffffff8818c072>] :i2c_core:i2c_clients_command
+0xa2/0xf0
[ 37.457452] [<ffffffff8825dfc0>] :saa7134:saa7134_video_init2
+0x10/0x40
[ 37.457462] [<ffffffff882577bb>] :saa7134:saa7134_initdev
+0x3fb/0x9a0
[ 37.457469] [<ffffffff802e8530>] sysfs_make_dirent+0x30/0x50
[ 37.457478] [<ffffffff803352d1>] pci_device_probe+0xf1/0x170
[ 37.457487] [<ffffffff80391063>] driver_probe_device+0xa3/0x1b0
[ 37.457494] [<ffffffff80391329>] __driver_attach+0xc9/0xd0
[ 37.457499] [<ffffffff80391260>] __driver_attach+0x0/0xd0
[ 37.457503] [<ffffffff8039023d>] bus_for_each_dev+0x4d/0x80
[ 37.457512] [<ffffffff8039069f>] bus_add_driver+0xaf/0x1f0
[ 37.457518] [<ffffffff80335556>] __pci_register_driver+0x66/0xb0
[ 37.457525] [<ffffffff80256edb>] sys_init_module+0x19b/0x19b0
[ 37.457540] [<ffffffff80326a21>] __up_write+0x21/0x130
[ 37.457551] [<ffffffff80209e8e>] system_call+0x7e/0x83
[ 37.457560]
[ 37.457561]
[ 37.457562] Code: 8b 87 c4 01 00 00 83 f8 36 74 0f 83 f8 47 74 27 b8
ea ff ff
[ 37.457571] RIP [<ffffffff88255839>] :saa7134:saa7134_tuner_callback
+0x9/0x190
[ 37.457582] RSP <ffff810065c65a38>
[ 37.457584] CR2: 00000000000001c4
[ 217.307903] loop: module loaded
<snip>
3) upgraded ubuntu 7.10
- now have /dev/video0 but tvtime no channel management
- now have a soundcard and volume control
dmesg
<snip>
[ 40.858920] Linux video capture interface: v2.00
[ 40.885880] videobuf_core: exports duplicate symbol
videobuf_mmap_mapper (owned by video_buf)
[ 40.898374] videobuf_dma_sg: disagrees about version of symbol
videobuf_alloc
[ 40.898379] videobuf_dma_sg: Unknown symbol videobuf_alloc
[ 40.898442] videobuf_dma_sg: Unknown symbol videobuf_queue_core_init
[ 40.966241] input: PC Speaker as /class/input/input4
[ 40.996272] usbcore: registered new interface driver xpad
[
40.996278] /build/buildd/linux-source-2.6.22-2.6.22/drivers/input/joystick/xpad.c: driver for Xbox controllers v0.1.6
[ 41.001747] videobuf_core: exports duplicate symbol
videobuf_mmap_mapper (owned by video_buf)
[ 41.002059] videobuf_dma_sg: disagrees about version of symbol
videobuf_alloc
[ 41.002062] videobuf_dma_sg: Unknown symbol videobuf_alloc
[ 41.002124] videobuf_dma_sg: Unknown symbol videobuf_queue_core_init
[ 41.023093] saa7130/34: v4l2 driver version 0.2.14 loaded
[ 41.024199] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 41.024212] ACPI: PCI Interrupt 0000:04:09.0[A] -> Link [APC2] -> GSI
17 (level, low) -> IRQ 17
[ 41.024221] saa7133[0]: found at 0000:04:09.0, rev: 209, irq: 17,
latency: 32, mmio: 0xfdbff000
[ 41.024228] saa7133[0]: subsystem: 1461:f936, board: UNKNOWN/GENERIC
[card=0,autodetected]
[ 41.024238] saa7133[0]: board init: gpio is 2fa00
[ 41.169381] saa7133[0]: i2c eeprom 00: 61 14 36 f9 00 00 00 00 00 00
00 00 00 00 00 00
[ 41.169390] saa7133[0]: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff
ff ff ff ff ff ff
[ 41.169398] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 01 00 08 ff
00 0e ff ff ff ff
[ 41.169405] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 41.169412] saa7133[0]: i2c eeprom 40: ff 65 00 ff c2 1e ff ff ff ff
ff ff ff ff ff ff
[ 41.169419] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 41.169426] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 41.169433] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 41.181368] saa7133[0]: i2c scan: found device @ 0x1e [???]
[ 41.201331] saa7133[0]: i2c scan: found device @ 0xa0 [eeprom]
[ 41.207898] saa7133[0]: registered device video0 [v4l2]
[ 41.207916] saa7133[0]: registered device vbi0
[ 41.207634] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
[ 41.207640] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [AAZA] -> GSI
22 (level, low) -> IRQ 22
[ 41.207843] PCI: Setting latency timer of device 0000:00:10.1 to 64
[ 41.216288] videobuf_core: exports duplicate symbol
videobuf_mmap_mapper (owned by video_buf)
[ 41.216665] videobuf_dma_sg: disagrees about version of symbol
videobuf_alloc
[ 41.216668] videobuf_dma_sg: Unknown symbol videobuf_alloc
[ 41.216730] videobuf_dma_sg: Unknown symbol videobuf_queue_core_init
[ 41.229655] saa7134 ALSA driver for DMA sound loaded
[ 41.229687] saa7133[0]/alsa: saa7133[0] at 0xfdbff000 irq 17
registered as card -2
[ 42.568641] loop: module loaded
<snip>
What is this?
[
40.996278] /build/buildd/linux-source-2.6.22-2.6.22/drivers/input/joystick/xpad.c: driver for Xbox controllers v0.1.6
I don't have a xbox, is it auto loaded module from kernel?
4) still no nvidia-glx-new
- make, sudo make install v4l-dvb
after cd v4l-dvb, make, sudo make install:
timf@ubuntu:~/v4l-dvb$ sudo modprobe saa7134
WARNING: Error inserting videobuf_core
(/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/videobuf-core.ko): Invalid module format
WARNING: Error inserting videobuf_dma_sg
(/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/videobuf-dma-sg.ko): Unknown symbol in module, or unknown parameter (see dmesg)
timf@ubuntu:~/v4l-dvb$
dmesg
<snip>
[ 40.858920] Linux video capture interface: v2.00
[ 40.885880] videobuf_core: exports duplicate symbol
videobuf_mmap_mapper (owned by video_buf)
[ 40.898374] videobuf_dma_sg: disagrees about version of symbol
videobuf_alloc
[ 40.898379] videobuf_dma_sg: Unknown symbol videobuf_alloc
[ 40.898442] videobuf_dma_sg: Unknown symbol videobuf_queue_core_init
[ 40.966241] input: PC Speaker as /class/input/input4
[ 40.996272] usbcore: registered new interface driver xpad
[
40.996278] /build/buildd/linux-source-2.6.22-2.6.22/drivers/input/joystick/xpad.c: driver for Xbox controllers v0.1.6
[ 41.001747] videobuf_core: exports duplicate symbol
videobuf_mmap_mapper (owned by video_buf)
[ 41.002059] videobuf_dma_sg: disagrees about version of symbol
videobuf_alloc
[ 41.002062] videobuf_dma_sg: Unknown symbol videobuf_alloc
[ 41.002124] videobuf_dma_sg: Unknown symbol videobuf_queue_core_init
[ 41.023093] saa7130/34: v4l2 driver version 0.2.14 loaded
[ 41.024199] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 41.024212] ACPI: PCI Interrupt 0000:04:09.0[A] -> Link [APC2] -> GSI
17 (level, low) -> IRQ 17
[ 41.024221] saa7133[0]: found at 0000:04:09.0, rev: 209, irq: 17,
latency: 32, mmio: 0xfdbff000
[ 41.024228] saa7133[0]: subsystem: 1461:f936, board: UNKNOWN/GENERIC
[card=0,autodetected]
[ 41.024238] saa7133[0]: board init: gpio is 2fa00
[ 41.169381] saa7133[0]: i2c eeprom 00: 61 14 36 f9 00 00 00 00 00 00
00 00 00 00 00 00
[ 41.169390] saa7133[0]: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff
ff ff ff ff ff ff
[ 41.169398] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 01 00 08 ff
00 0e ff ff ff ff
[ 41.169405] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 41.169412] saa7133[0]: i2c eeprom 40: ff 65 00 ff c2 1e ff ff ff ff
ff ff ff ff ff ff
[ 41.169419] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 41.169426] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 41.169433] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 41.181368] saa7133[0]: i2c scan: found device @ 0x1e [???]
[ 41.201331] saa7133[0]: i2c scan: found device @ 0xa0 [eeprom]
[ 41.207898] saa7133[0]: registered device video0 [v4l2]
[ 41.207916] saa7133[0]: registered device vbi0
[ 41.207634] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
[ 41.207640] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [AAZA] -> GSI
22 (level, low) -> IRQ 22
[ 41.207843] PCI: Setting latency timer of device 0000:00:10.1 to 64
[ 41.216288] videobuf_core: exports duplicate symbol
videobuf_mmap_mapper (owned by video_buf)
[ 41.216665] videobuf_dma_sg: disagrees about version of symbol
videobuf_alloc
[ 41.216668] videobuf_dma_sg: Unknown symbol videobuf_alloc
[ 41.216730] videobuf_dma_sg: Unknown symbol videobuf_queue_core_init
[ 41.229655] saa7134 ALSA driver for DMA sound loaded
[ 41.229687] saa7133[0]/alsa: saa7133[0] at 0xfdbff000 irq 17
registered as card -2
[ 42.568641] loop: module loaded
[ 42.591463] lp0: using parport0 (interrupt-driven).
[ 42.683471] Adding 9767512k swap on /dev/sda3. Priority:-1 extents:1
across:9767512k
[ 43.018620] EXT3 FS on sda4, internal journal
[ 43.674379] kjournald starting. Commit interval 5 seconds
[ 43.675429] EXT3 FS on sda2, internal journal
[ 43.675436] EXT3-fs: mounted filesystem with ordered data mode.
[ 44.385992] No dock devices found.
[ 44.463874] input: Power Button (FF) as /class/input/input5
[ 44.463900] ACPI: Power Button (FF) [PWRF]
[ 44.463943] input: Power Button (CM) as /class/input/input6
[ 44.463956] ACPI: Power Button (CM) [PWRB]
[ 44.726559] powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core
Processor 3600+ processors (version 2.00.00)
[ 44.725758] powernow-k8: MP systems not supported by PSB BIOS
structure
[ 44.726603] powernow-k8: MP systems not supported by PSB BIOS
structure
[ 45.730504] ppdev: user-space parallel port driver
[ 45.850955] audit(1205902078.360:3): type=1503
operation="inode_permission" requested_mask="a" denied_mask="a"
name="/dev/tty" pid=5088 profile="/usr/sbin/cupsd"
[ 46.184234] Failure registering capabilities with primary security
module.
[ 46.358319] Bluetooth: Core ver 2.11
[ 46.358438] NET: Registered protocol family 31
[ 46.358441] Bluetooth: HCI device and connection manager initialized
[ 46.358445] Bluetooth: HCI socket layer initialized
[ 46.368366] Bluetooth: L2CAP ver 2.8
[ 46.368373] Bluetooth: L2CAP socket layer initialized
[ 46.419940] Bluetooth: RFCOMM socket layer initialized
[ 46.420043] Bluetooth: RFCOMM TTY layer initialized
[ 46.420046] Bluetooth: RFCOMM ver 1.8
[ 50.527622] NET: Registered protocol family 17
[ 53.186922] NET: Registered protocol family 10
[ 53.187106] lo: Disabled Privacy Extensions
[ 63.602916] eth0: no IPv6 routers present
[ 112.219989] usb 2-2: new high speed USB device using ehci_hcd and
address 4
[ 112.353831] usb 2-2: configuration #1 chosen from 1 choice
[ 112.427851] usbcore: registered new interface driver libusual
[ 112.448957] Initializing USB Mass Storage driver...
[ 112.449315] scsi4 : SCSI emulation for USB Mass Storage devices
[ 112.449028] usb-storage: device found at 4
[ 112.449035] usb-storage: waiting for device to settle before scanning
[ 112.449716] usbcore: registered new interface driver usb-storage
[ 112.449805] USB Mass Storage support registered.
[ 117.444090] usb-storage: device scan complete
[ 117.445168] scsi 4:0:0:0: Direct-Access USBDisk RunDisk
1.00 PQ: 0 ANSI: 2
[ 117.450144] sd 4:0:0:0: [sdb] 4005000 512-byte hardware sectors (2051
MB)
[ 117.451766] sd 4:0:0:0: [sdb] Write Protect is off
[ 117.451771] sd 4:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[ 117.451774] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 117.457132] sd 4:0:0:0: [sdb] 4005000 512-byte hardware sectors (2051
MB)
[ 117.458754] sd 4:0:0:0: [sdb] Write Protect is off
[ 117.458758] sd 4:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[ 117.458762] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 117.458766] sdb: sdb1
[ 117.511250] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 117.511293] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 142.382746] usb 2-2: USB disconnect, address 4
[ 831.554889] videobuf_core: exports duplicate symbol
videobuf_mmap_mapper (owned by video_buf)
[ 831.555406] videobuf_dma_sg: disagrees about version of symbol
videobuf_alloc
[ 831.555410] videobuf_dma_sg: Unknown symbol videobuf_alloc
[ 831.555473] videobuf_dma_sg: Unknown symbol videobuf_queue_core_init
[ 944.319189] usb 2-2: new high speed USB device using ehci_hcd and
address 5
[ 944.465057] usb 2-2: configuration #1 chosen from 1 choice
[ 944.465398] scsi5 : SCSI emulation for USB Mass Storage devices
[ 944.465168] usb-storage: device found at 5
[ 944.465174] usb-storage: waiting for device to settle before scanning
[ 949.459464] usb-storage: device scan complete
[ 949.460517] scsi 5:0:0:0: Direct-Access USBDisk RunDisk
1.00 PQ: 0 ANSI: 2
[ 949.465494] sd 5:0:0:0: [sdb] 4005000 512-byte hardware sectors (2051
MB)
[ 949.467115] sd 5:0:0:0: [sdb] Write Protect is off
[ 949.467119] sd 5:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[ 949.467124] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 949.472482] sd 5:0:0:0: [sdb] 4005000 512-byte hardware sectors (2051
MB)
[ 949.474103] sd 5:0:0:0: [sdb] Write Protect is off
[ 949.474107] sd 5:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[ 949.474109] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 949.474113] sdb: sdb1
[ 949.599354] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[ 949.599397] sd 5:0:0:0: Attached scsi generic sg1 type 0
What's this?
[ 41.216288] videobuf_core: exports duplicate symbol
videobuf_mmap_mapper (owned by video_buf)
[ 41.216665] videobuf_dma_sg: disagrees about version of symbol
videobuf_alloc
[ 41.216668] videobuf_dma_sg: Unknown symbol videobuf_alloc
[ 41.216730] videobuf_dma_sg: Unknown symbol videobuf_queue_core_init
still no nvidia-glx-new
Reboot
dmesg
<snip>
[ 38.451668] Linux video capture interface: v2.00
[ 38.478278] usbcore: registered new interface driver xpad
[
38.478284] /build/buildd/linux-source-2.6.22-2.6.22/drivers/input/joystick/xpad.c: driver for Xbox controllers v0.1.6
[ 38.536507] saa7130/34: v4l2 driver version 0.2.14 loaded
[ 38.537018] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 38.537030] ACPI: PCI Interrupt 0000:04:09.0[A] -> Link [APC2] -> GSI
17 (level, low) -> IRQ 17
[ 38.537038] saa7133[0]: found at 0000:04:09.0, rev: 209, irq: 17,
latency: 32, mmio: 0xfdbff000
[ 38.537045] saa7133[0]: subsystem: 1461:f936, board: AVerMedia Hybrid
TV/Radio (A16D) [card=137,autodetected]
[ 38.537055] saa7133[0]: board init: gpio is 2fa00
[ 38.720192] saa7133[0]: i2c eeprom 00: 61 14 36 f9 00 00 00 00 00 00
00 00 00 00 00 00
[ 38.720201] saa7133[0]: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff
ff ff ff ff ff ff
[ 38.720208] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 01 00 08 ff
00 0e ff ff ff ff
[ 38.720216] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 38.720223] saa7133[0]: i2c eeprom 40: ff 65 00 ff c2 1e ff ff ff ff
ff ff ff ff ff ff
[ 38.720230] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 38.720237] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 38.720245] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 38.720252] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 38.720259] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 38.720267] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 38.720274] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 38.720281] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 38.720289] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 38.720297] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 38.720304] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 38.740158] saa7133[0]: i2c scan: found device @ 0xa0 [eeprom]
[ 38.752139] saa7133[0]: i2c scan: found device @ 0xc2 [???]
[ 38.851995] tuner' 2-0061: Setting mode_mask to 0x0e
[ 38.852000] tuner' 2-0061: chip found @ 0xc2 (saa7133[0])
[ 38.852003] tuner' 2-0061: tuner 0x61: Tuner type absent
[ 38.852043] tuner' 2-0061: Calling set_type_addr for type=71,
addr=0xff, mode=0x04, config=0x00
[ 38.852046] tuner' 2-0061: set addr for type -1
[ 38.852048] tuner' 2-0061: defining GPIO callback
[ 38.852051] xc2028: Xcv2028/3028 init called!
[ 38.852055] xc2028 2-0061: type set to XCeive xc2028/xc3028 tuner
[ 38.852058] tuner' 2-0061: type set to Xceive XC3028
[ 38.852061] tuner' 2-0061: tv freq set to 400.00
[ 38.852063] xc2028 2-0061: xc2028_set_analog_freq called
[ 38.852066] xc2028 2-0061: generic_set_freq called
[ 38.852069] xc2028 2-0061: should set frequency 400000 kHz
[ 38.852071] xc2028 2-0061: check_firmware called
[ 38.852073] xc2028 2-0061: xc2028/3028 firmware name not set!
[ 38.852076] tuner' 2-0061: saa7133[0] tuner' I2C addr 0xc2 with type
71 used for 0x0e
[ 38.854098] xc2028 2-0061: xc2028_set_config called
[ 38.854103] tuner' 2-0061: switching to v4l2
[ 38.854106] tuner' 2-0061: tv freq set to 400.00
[ 38.854108] xc2028 2-0061: xc2028_set_analog_freq called
[ 38.854110] xc2028 2-0061: generic_set_freq called
[ 38.854113] xc2028 2-0061: should set frequency 400000 kHz
[ 38.854115] xc2028 2-0061: check_firmware called
[ 38.854117] xc2028 2-0061: load_all_firmwares called
[ 38.854119] xc2028 2-0061: Reading firmware xc3028-v27.fw
[ 38.887454] xc2028 2-0061: Loading 80 firmware images from
xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[ 38.887468] xc2028 2-0061: Reading firmware type BASE F8MHZ (3), id
0, size=8718.
[ 38.887481] xc2028 2-0061: Reading firmware type BASE F8MHZ MTS (7),
id 0, size=8712.
[ 38.887492] xc2028 2-0061: Reading firmware type BASE FM (401), id 0,
size=8562.
[ 38.887502] xc2028 2-0061: Reading firmware type BASE FM INPUT1
(c01), id 0, size=8576.
[ 38.887514] xc2028 2-0061: Reading firmware type BASE (1), id 0,
size=8706.
[ 38.887525] xc2028 2-0061: Reading firmware type BASE MTS (5), id 0,
size=8682.
[ 38.887531] xc2028 2-0061: Reading firmware type (0), id 100000007,
size=161.
[ 38.887534] xc2028 2-0061: Reading firmware type MTS (4), id
100000007, size=169.
[ 38.887539] xc2028 2-0061: Reading firmware type (0), id 200000007,
size=161.
[ 38.887542] xc2028 2-0061: Reading firmware type MTS (4), id
200000007, size=169.
[ 38.887546] xc2028 2-0061: Reading firmware type (0), id 400000007,
size=161.
[ 38.887550] xc2028 2-0061: Reading firmware type MTS (4), id
400000007, size=169.
[ 38.887554] xc2028 2-0061: Reading firmware type (0), id 800000007,
size=161.
[ 38.887558] xc2028 2-0061: Reading firmware type MTS (4), id
800000007, size=169.
[ 38.887562] xc2028 2-0061: Reading firmware type (0), id 3000000e0,
size=161.
[ 38.887565] xc2028 2-0061: Reading firmware type MTS (4), id
3000000e0, size=169.
[ 38.887569] xc2028 2-0061: Reading firmware type (0), id c000000e0,
size=161.
[ 38.887572] xc2028 2-0061: Reading firmware type MTS (4), id
c000000e0, size=169.
[ 38.887576] xc2028 2-0061: Reading firmware type (0), id 200000,
size=161.
[ 38.887579] xc2028 2-0061: Reading firmware type MTS (4), id 200000,
size=169.
[ 38.887583] xc2028 2-0061: Reading firmware type (0), id 4000000,
size=161.
[ 38.887586] xc2028 2-0061: Reading firmware type MTS (4), id 4000000,
size=169.
[ 38.887590] xc2028 2-0061: Reading firmware type D2633 DTV6 ATSC
(10030), id 0, size=149.
[ 38.887594] xc2028 2-0061: Reading firmware type D2620 DTV6 QAM (68),
id 0, size=149.
[ 38.887598] xc2028 2-0061: Reading firmware type D2633 DTV6 QAM (70),
id 0, size=149.
[ 38.887604] xc2028 2-0061: Reading firmware type D2620 DTV7 (88), id
0, size=149.
[ 38.887607] xc2028 2-0061: Reading firmware type D2633 DTV7 (90), id
0, size=149.
[ 38.887611] xc2028 2-0061: Reading firmware type D2620 DTV78 (108),
id 0, size=149.
[ 38.887615] xc2028 2-0061: Reading firmware type D2633 DTV78 (110),
id 0, size=149.
[ 38.887619] xc2028 2-0061: Reading firmware type D2620 DTV8 (208), id
0, size=149.
[ 38.887622] xc2028 2-0061: Reading firmware type D2633 DTV8 (210), id
0, size=149.
[ 38.887626] xc2028 2-0061: Reading firmware type FM (400), id 0,
size=135.
[ 38.887630] xc2028 2-0061: Reading firmware type (0), id 10,
size=161.
[ 38.887633] xc2028 2-0061: Reading firmware type MTS (4), id 10,
size=169.
[ 38.887636] xc2028 2-0061: Reading firmware type (0), id 1000400000,
size=169.
[ 38.887640] xc2028 2-0061: Reading firmware type (0), id c00400000,
size=161.
[ 38.887643] xc2028 2-0061: Reading firmware type (0), id 800000,
size=161.
[ 38.887646] xc2028 2-0061: Reading firmware type (0), id 8000,
size=161.
[ 38.887649] xc2028 2-0061: Reading firmware type LCD (1000), id 8000,
size=161.
[ 38.887653] xc2028 2-0061: Reading firmware type LCD NOGD (3000), id
8000, size=161.
[ 38.887657] xc2028 2-0061: Reading firmware type MTS (4), id 8000,
size=169.
[ 38.887661] xc2028 2-0061: Reading firmware type (0), id b700,
size=161.
[ 38.887664] xc2028 2-0061: Reading firmware type LCD (1000), id b700,
size=161.
[ 38.887667] xc2028 2-0061: Reading firmware type LCD NOGD (3000), id
b700, size=161.
[ 38.887671] xc2028 2-0061: Reading firmware type (0), id 2000,
size=161.
[ 38.887674] xc2028 2-0061: Reading firmware type MTS (4), id b700,
size=169.
[ 38.887679] xc2028 2-0061: Reading firmware type MTS LCD (1004), id
b700, size=169.
[ 38.887682] xc2028 2-0061: Reading firmware type MTS LCD NOGD (3004),
id b700, size=169.
[ 38.887687] xc2028 2-0061: Reading firmware type SCODE HAS_IF_3280
(60000000), id 0, size=192.
[ 38.887691] xc2028 2-0061: Reading firmware type SCODE HAS_IF_3300
(60000000), id 0, size=192.
[ 38.887695] xc2028 2-0061: Reading firmware type SCODE HAS_IF_3440
(60000000), id 0, size=192.
[ 38.887700] xc2028 2-0061: Reading firmware type SCODE HAS_IF_3460
(60000000), id 0, size=192.
[ 38.887705] xc2028 2-0061: Reading firmware type DTV6 ATSC OREN36
SCODE HAS_IF_3800 (60210020), id 0, size=192.
[ 38.887710] xc2028 2-0061: Reading firmware type SCODE HAS_IF_4000
(60000000), id 0, size=192.
[ 38.887715] xc2028 2-0061: Reading firmware type DTV6 ATSC TOYOTA388
SCODE HAS_IF_4080 (60410020), id 0, size=192.
[ 38.887720] xc2028 2-0061: Reading firmware type SCODE HAS_IF_4200
(60000000), id 0, size=192.
[ 38.887725] xc2028 2-0061: Reading firmware type MONO SCODE
HAS_IF_4320 (60008000), id 8000, size=192.
[ 38.887730] xc2028 2-0061: Reading firmware type SCODE HAS_IF_4450
(60000000), id 0, size=192.
[ 38.887734] xc2028 2-0061: Reading firmware type SCODE HAS_IF_4500
(60000000), id 2000, size=192.
[ 38.887739] xc2028 2-0061: Reading firmware type LCD NOGD IF SCODE
HAS_IF_4600 (60023000), id 8000, size=192.
[ 38.887744] xc2028 2-0061: Reading firmware type DTV78 ZARLINK456
SCODE HAS_IF_4760 (62000100), id 0, size=192.
[ 38.887749] xc2028 2-0061: Reading firmware type SCODE HAS_IF_4940
(60000000), id 0, size=192.
[ 38.887753] xc2028 2-0061: Reading firmware type DTV7 ZARLINK456
SCODE HAS_IF_5260 (62000080), id 0, size=192.
[ 38.887758] xc2028 2-0061: Reading firmware type MONO SCODE
HAS_IF_5320 (60008000), id 800000007, size=192.
[ 38.887763] xc2028 2-0061: Reading firmware type DTV8 CHINA SCODE
HAS_IF_5400 (64000200), id 0, size=192.
[ 38.887768] xc2028 2-0061: Reading firmware type DTV6 ATSC OREN538
SCODE HAS_IF_5580 (60110020), id 0, size=192.
[ 38.887774] xc2028 2-0061: Reading firmware type SCODE HAS_IF_5640
(60000000), id 200000007, size=192.
[ 38.887780] xc2028 2-0061: Reading firmware type SCODE HAS_IF_5740
(60000000), id 800000007, size=192.
[ 38.887785] xc2028 2-0061: Reading firmware type DTV7 DIBCOM52 SCODE
HAS_IF_5900 (61000080), id 0, size=192.
[ 38.887790] xc2028 2-0061: Reading firmware type MONO SCODE
HAS_IF_6000 (60008000), id 10, size=192.
[ 38.887795] xc2028 2-0061: Reading firmware type DTV6 QAM F6MHZ SCODE
HAS_IF_6200 (68000060), id 0, size=192.
[ 38.887800] xc2028 2-0061: Reading firmware type SCODE HAS_IF_6240
(60000000), id 10, size=192.
[ 38.887805] xc2028 2-0061: Reading firmware type MONO SCODE
HAS_IF_6320 (60008000), id 200000, size=192.
[ 38.887810] xc2028 2-0061: Reading firmware type SCODE HAS_IF_6340
(60000000), id 200000, size=192.
[ 38.887815] xc2028 2-0061: Reading firmware type MONO SCODE
HAS_IF_6500 (60008000), id 4000000, size=192.
[ 38.887820] xc2028 2-0061: Reading firmware type DTV6 ATSC ATI638
SCODE HAS_IF_6580 (60090020), id 0, size=192.
[ 38.887825] xc2028 2-0061: Reading firmware type SCODE HAS_IF_6600
(60000000), id 3000000e0, size=192.
[ 38.887830] xc2028 2-0061: Reading firmware type MONO SCODE
HAS_IF_6680 (60008000), id 3000000e0, size=192.
[ 38.887835] xc2028 2-0061: Reading firmware type DTV6 ATSC TOYOTA794
SCODE HAS_IF_8140 (60810020), id 0, size=192.
[ 38.887841] xc2028 2-0061: Reading firmware type SCODE HAS_IF_8200
(60000000), id 0, size=192.
[ 38.887851] xc2028 2-0061: Firmware files loaded.
[ 38.887854] xc2028 2-0061: checking firmware, user requested
type=F8MHZ MTS (6), id 00000000000000ff, scode_tbl (0), scode_nr 0
[ 38.887878] Unable to handle kernel NULL pointer dereference at
00000000000001c4 RIP:
[ 38.887881] [<ffffffff8826e839>] :saa7134:saa7134_tuner_callback
+0x9/0x190
[ 38.887903] PGD 67dc9067 PUD 67b92067 PMD 0
[ 38.887906] Oops: 0000 [1] SMP
[ 38.887909] CPU 1
[ 38.887911] Modules linked in: tuner tea5767 tda8290 tda18271 tda827x
tuner_xc2028 xc5000 tda9887 tuner_simple tuner_types mt20xx tea5761
snd_hda_intel snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy saa7134
snd_seq_oss xpad compat_ioctl32 videodev v4l1_compat v4l2_common
videobuf_dma_sg videobuf_core ir_kbd_i2c ide_cd cdrom usbhid
snd_seq_midi ir_common tveeprom hid parport_pc psmouse snd_rawmidi
snd_seq_midi_event pcspkr parport snd_seq snd_timer snd_seq_device
i2c_nforce2 k8temp serio_raw snd soundcore snd_page_alloc i2c_core
shpchp pci_hotplug evdev ext3 jbd mbcache sg sd_mod amd74xx ide_core
forcedeth ohci_hcd ata_generic ehci_hcd usbcore sata_nv libata scsi_mod
thermal processor fan fuse apparmor commoncap
[ 38.887952] Pid: 3934, comm: modprobe Not tainted 2.6.22-14-generic
#1
[ 38.887955] RIP: 0010:[<ffffffff8826e839>]
[<ffffffff8826e839>] :saa7134:saa7134_tuner_callback+0x9/0x190
[ 38.887967] RSP: 0018:ffff810066f93a38 EFLAGS: 00010292
[ 38.887970] RAX: 0000000000000007 RBX: 0000000000000001 RCX:
0000000000000000
[ 38.887972] RDX: 0000000000000000 RSI: 0000000000000000 RDI:
0000000000000000
[ 38.887975] RBP: ffff810066a00000 R08: 0000000000009048 R09:
0000000000000007
[ 38.887978] R10: 0000000000000000 R11: 0000000000000001 R12:
0000000000000000
[ 38.887981] R13: ffff810066a00078 R14: 0000000000000001 R15:
0000000000000001
[ 38.887984] FS: 00002ae9a3ee16e0(0000) GS:ffff8100378e6280(0000)
knlGS:0000000000000000
[ 38.887988] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 38.887990] CR2: 00000000000001c4 CR3: 0000000068c71000 CR4:
00000000000006e0
[ 38.887994] Process modprobe (pid: 3934, threadinfo ffff810066f92000,
task ffff810066a4c6e0)
[ 38.887996] Stack: ffff810066a00000 ffffffff8833a803
ffff810066f93b08 ffff810000000002
[ 38.888004] ffff810000000007 ffff810065ce8c00 ffff810065ce8e70
00000000000000ff
[ 38.888009] 0000000665ce8d70 17d7840000000004 ffff810065ce8c00
ffff810066a000a0
[ 38.888014] Call Trace:
[ 38.888021] [<ffffffff8833a803>] :tuner_xc2028:generic_set_freq
+0x593/0x1830
[ 38.888038] [<ffffffff802361fe>] printk+0x4e/0x60
[ 38.888053] [<ffffffff88358a4e>] :tuner:set_tv_freq+0xae/0x1c0
[ 38.888061] [<ffffffff88358bd1>] :tuner:set_freq+0x71/0x1a0
[ 38.888067] [<ffffffff88359fe8>] :tuner:tuner_command+0x198/0x12f0
[ 38.888081] [<ffffffff88177072>] :i2c_core:i2c_clients_command
+0xa2/0xf0
[ 38.888094] [<ffffffff88276fc0>] :saa7134:saa7134_video_init2
+0x10/0x40
[ 38.888104] [<ffffffff882707bb>] :saa7134:saa7134_initdev
+0x3fb/0x9a0
[ 38.888110] [<ffffffff802e8600>] sysfs_make_dirent+0x30/0x50
[ 38.888119] [<ffffffff803353a1>] pci_device_probe+0xf1/0x170
[ 38.888128] [<ffffffff80391133>] driver_probe_device+0xa3/0x1b0
[ 38.888134] [<ffffffff803913f9>] __driver_attach+0xc9/0xd0
[ 38.888139] [<ffffffff80391330>] __driver_attach+0x0/0xd0
[ 38.888144] [<ffffffff8039030d>] bus_for_each_dev+0x4d/0x80
[ 38.888152] [<ffffffff8039076f>] bus_add_driver+0xaf/0x1f0
[ 38.888158] [<ffffffff80335626>] __pci_register_driver+0x66/0xb0
[ 38.888164] [<ffffffff80256f1b>] sys_init_module+0x19b/0x19b0
[ 38.888178] [<ffffffff80326af1>] __up_write+0x21/0x130
[ 38.888189] [<ffffffff80209e8e>] system_call+0x7e/0x83
[ 38.888197]
[ 38.888198]
[ 38.888199] Code: 8b 87 c4 01 00 00 83 f8 36 74 0f 83 f8 47 74 27 b8
ea ff ff
[ 38.888208] RIP [<ffffffff8826e839>] :saa7134:saa7134_tuner_callback
+0x9/0x190
[ 38.888219] RSP <ffff810066f93a38>
[ 38.888221] CR2: 00000000000001c4
[ 218.562468] loop: module loaded
<snip>
- still no nvidia-glx-new module installed yet
- again no /dev/video#
- again no soundcard detected??? -> no volume control
Now, I will wait, and not install nvidia-glx-new - it could be that
which destroys GDM at boot, however I will need to install it to watch
TV, nv is just not up to it.
I guess that's back to you experts!
Best Regards,
Tim
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
