Mauro, Many thanks for your efforts. I hope the following is useful. Currently running on OpenSuSE 11.0 Alpha2, kernel 2.6.24-6 Mauro Carvalho Chehab wrote: ... > If you're getting too much errors, it may mean that you're having some > conflicts on your compilation. > > There is a recent patch at the tree that changed the module dependencies. > (before the patch, videodev were dependent on v4l2-common - now, the dependency > is the reverse. Only after "make distclean", the building system will > correctly deal with this change) > > Please try to do force a cleanup, with this: > make distclean OK - no errors > make OK - no errors but a handful of warnings e.g. possibly uninitialised variables in ov7670 module > make rminstall OK - no errors > make rmmod OK - no errors > make install OK - no errors > modprobe saa7134 tuner=71 entire addition to /var/log/messages follows: Feb 12 17:57:52 DevBox2400 klogd: Linux video capture interface: v2.00 Feb 12 17:57:52 DevBox2400 klogd: saa7130/34: v4l2 driver version 0.2.14 loaded Feb 12 17:57:52 DevBox2400 klogd: saa7133[0]: found at 0000:00:0d.0, rev: 209, irq: 19, latency: 32, mmio: 0xe2000000 Feb 12 17:57:52 DevBox2400 klogd: saa7133[0]: subsystem: 1461:f936, board: AVerMedia Hybrid TV/Radio (A16D) [card=133,autodetected] Feb 12 17:57:52 DevBox2400 klogd: saa7133[0]: board init: gpio is 2fe00 Feb 12 17:57:52 DevBox2400 klogd: saa7133[0]: i2c eeprom 00: 61 14 36 f9 00 00 00 00 00 00 00 00 00 00 00 00 Feb 12 17:57:52 DevBox2400 klogd: saa7133[0]: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff Feb 12 17:57:52 DevBox2400 klogd: saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 01 00 08 ff 00 0e ff ff ff ff Feb 12 17:57:52 DevBox2400 klogd: saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Feb 12 17:57:52 DevBox2400 klogd: saa7133[0]: i2c eeprom 40: ff 65 00 ff c2 1e ff ff ff ff ff ff ff ff ff ff Feb 12 17:57:52 DevBox2400 klogd: saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Feb 12 17:57:52 DevBox2400 klogd: saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Feb 12 17:57:52 DevBox2400 klogd: saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Feb 12 17:57:52 DevBox2400 klogd: saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Feb 12 17:57:52 DevBox2400 klogd: saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Feb 12 17:57:52 DevBox2400 klogd: saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Feb 12 17:57:52 DevBox2400 klogd: saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Feb 12 17:57:52 DevBox2400 klogd: saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Feb 12 17:57:52 DevBox2400 klogd: saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Feb 12 17:57:52 DevBox2400 klogd: saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Feb 12 17:57:52 DevBox2400 klogd: saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Feb 12 17:57:52 DevBox2400 klogd: saa7133[0]: registered device video0 [v4l2] Feb 12 17:57:52 DevBox2400 klogd: saa7133[0]: registered device vbi0 Feb 12 17:57:52 DevBox2400 klogd: saa7133[0]: registered device radio0 > please forward the errors that it might produce. You may forward the full dmesg > errors to me in priv directly. I prefer if you don't generate a tarball, since > makes easier for me to comment, the results, if needed. OK, point taken. It's not huge... In reply to your second message: > I suspect that some gpio is needed before scanning tuners, in order to enable > the i2c bus. Could you please do this: > > modprobe saa7134 i2c_scan=1 > > and send me the complete dmesg after modprobing the board. # rmmod saa7134 # modprobe saa7134 i2c_scan=1 Feb 12 18:03:26 DevBox2400 klogd: saa7130/34: v4l2 driver version 0.2.14 loaded Feb 12 18:03:26 DevBox2400 klogd: saa7133[0]: found at 0000:00:0d.0, rev: 209, irq: 19, latency: 32, mmio: 0xe2000000 Feb 12 18:03:26 DevBox2400 klogd: saa7133[0]: subsystem: 1461:f936, board: AVerMedia Hybrid TV/Radio (A16D) [card=133,autodetected] Feb 12 18:03:26 DevBox2400 klogd: saa7133[0]: board init: gpio is 2fe00 Feb 12 18:03:26 DevBox2400 klogd: saa7133[0]: i2c eeprom 00: 61 14 36 f9 00 00 00 00 00 00 00 00 00 00 00 00 Feb 12 18:03:26 DevBox2400 klogd: saa7133[0]: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff Feb 12 18:03:26 DevBox2400 klogd: saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 01 00 08 ff 00 0e ff ff ff ff Feb 12 18:03:26 DevBox2400 klogd: saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Feb 12 18:03:26 DevBox2400 klogd: saa7133[0]: i2c eeprom 40: ff 65 00 ff c2 1e ff ff ff ff ff ff ff ff ff ff Feb 12 18:03:26 DevBox2400 klogd: saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Feb 12 18:03:26 DevBox2400 klogd: saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Feb 12 18:03:26 DevBox2400 klogd: saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Feb 12 18:03:26 DevBox2400 klogd: saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Feb 12 18:03:26 DevBox2400 klogd: saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Feb 12 18:03:26 DevBox2400 klogd: saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Feb 12 18:03:26 DevBox2400 klogd: saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Feb 12 18:03:26 DevBox2400 klogd: saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Feb 12 18:03:26 DevBox2400 klogd: saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Feb 12 18:03:26 DevBox2400 klogd: saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Feb 12 18:03:26 DevBox2400 klogd: saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Feb 12 18:03:26 DevBox2400 klogd: saa7133[0]: i2c scan: found device @ 0x1e [???] Feb 12 18:03:26 DevBox2400 klogd: saa7133[0]: i2c scan: found device @ 0xa0 [eeprom] Feb 12 18:03:26 DevBox2400 klogd: saa7133[0]: registered device video0 [v4l2] Feb 12 18:03:26 DevBox2400 klogd: saa7133[0]: registered device vbi0 Feb 12 18:03:26 DevBox2400 klogd: saa7133[0]: registered device radio0 During the above, /etc/modules.conf.local is empty. Added > options tuner debug=1 > options tuner-xc2028 debug=1 and tried again, output is exactly the same except for the timestamps. Thanks again for looking at this Cheers Richard (MQ) _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
