Richard (MQ) wrote: > Mauro Carvalho Chehab wrote: >> "Richard (MQ)" <osl2008@xxxxxxxxxxxxxx> wrote: >>>> tuner: Unknown parameter `tuner_xc2028' >> Hmm... I suspect you did something wrong at modprobe.conf.local. It seems that >> it is using tuner_xc2028 as a parameter to tuner module. >> >> What we need is to have a parameter "debug=1" to both tuner an tuner-xc2028 >> modules. > > I thought I just pasted your lines straight in... > > I'll have another try tonight, maybe something is mis-typed. If I load > with modprobe -v it will show the options being used. After booting: DevBox2400:~ # rmmod tuner tuner-xc2028 saa7134 tuner-simple tuner-types DevBox2400:~ # modprobe -vv tuner insmod /lib/modules/.../media/video/tuner-types.ko insmod /lib/modules/.../media/video/tuner-simple.ko insmod /lib/modules/.../media/video/tuner-xc2028.ko debug=1 insmod /lib/modules/.../media/video/tuner.ko debug=1 DevBox2400:~ # modprobe -vv saa7134 insmod /lib/modules/.../kernel/drivers/media/video/saa7134/saa7134.ko but /var/log/messages shows no sign of the debug messages: Feb 7 20:08:49 DevBox2400 kernel: saa7130/34: v4l2 driver version 0.2.14 loaded Feb 7 20:08:49 DevBox2400 kernel: saa7133[0]: found at 0000:00:0d.0, rev: 209, irq: 20, latency: 32, mmio: 0xe2000000 Feb 7 20:08:49 DevBox2400 kernel: saa7133[0]: subsystem: 1461:f936, board: AVerMedia Hybrid TV/Radio (A16D) [card=133,autodetected] Feb 7 20:08:49 DevBox2400 kernel: saa7133[0]: board init: gpio is 2f600 Feb 7 20:08:50 DevBox2400 kernel: saa7133[0]: i2c eeprom 00: 61 14 36 f9 00 00 00 00 00 00 00 00 00 00 00 00 ... modinfo confirms that tuner-xc2028 is your code. I'm completely baffled by this... Cheers Richard. _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
