Thank you David/Manu This is just the kind of help I was hoping for David, I did pretty much as you did, although after make and make install I just rebooted and all the modules and /dev/dvb entries were created for me, so lsmod gives me all the modules you quote installed Output from lsmod Module Size Used by nls_utf8 10305 1 vfat 19009 1 fat 54513 1 vfat rfcomm 50537 0 l2cap 36289 9 rfcomm bluetooth 64453 4 rfcomm,l2cap sunrpc 168009 1 cpufreq_ondemand 15569 1 loop 23493 0 dm_multipath 24401 0 ipv6 307273 18 osst 57193 0 st 43109 0 lnbp21 10240 1 stb6100 15748 1 stb0899 41728 1 saa7134_dvb 24076 0 videobuf_dvb 13316 1 saa7134_dvb tda1004x 23300 2 saa7134_dvb sr_mod 23397 1 cdrom 40553 1 sr_mod snd_hda_intel 361577 3 snd_seq_dummy 11461 0 snd_seq_oss 37313 0 snd_seq_midi_event 15041 1 snd_seq_oss snd_seq 56673 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event snd_seq_device 15061 3 snd_seq_dummy,snd_seq_oss,snd_seq snd_pcm_oss 45889 0 snd_mixer_oss 22721 1 snd_pcm_oss snd_pcm 80201 2 snd_hda_intel,snd_pcm_oss snd_timer 27721 2 snd_seq,snd_pcm snd_page_alloc 16465 2 snd_hda_intel,snd_pcm budget_ci 30980 0 budget_core 17668 1 budget_ci saa7134 148572 1 saa7134_dvb videodev 33664 1 saa7134 v4l1_compat 19460 1 videodev compat_ioctl32 16128 1 saa7134 v4l2_common 26240 3 saa7134,videodev,compat_ioctl32 videobuf_dma_sg 19716 3 saa7134_dvb,videobuf_dvb,saa7134 videobuf_core 24196 3 videobuf_dvb,saa7134,videobuf_dma_sg ir_kbd_i2c 16912 1 saa7134 snd_hwdep 16073 1 snd_hda_intel dvb_core 89684 3 videobuf_dvb,budget_ci,budget_core saa7146 23688 2 budget_ci,budget_core ttpci_eeprom 10496 1 budget_core firewire_ohci 25281 0 ir_common 41732 3 budget_ci,saa7134,ir_kbd_i2c snd 60137 15 snd_hda_intel,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_o ss,snd_pcm,snd_timer,snd_hwdep nvidia 8895940 24 firewire_core 46337 1 firewire_ohci crc_itu_t 10433 1 firewire_core aic7xxx 133501 0 scsi_transport_spi 32577 1 aic7xxx parport_pc 35177 0 tveeprom 24848 1 saa7134 soundcore 15073 1 snd sg 40297 0 forcedeth 53321 0 parport 42317 1 parport_pc pcspkr 11329 0 button 15969 0 pata_amd 20293 0 k8temp 13377 0 hwmon 11081 1 k8temp i2c_nforce2 14017 0 usblp 20801 0 i2c_core 28865 14 lnbp21,stb6100,stb0899,saa7134_dvb,tda1004x,budget_ci,budget_core,saa713 4,v4l2_common,ir_kbd_i2c,ttpci_eeprom,nvidia,tveeprom,i2c_nforce2 usb_storage 87681 2 dm_snapshot 23049 0 dm_zero 10433 0 dm_mirror 27200 0 dm_mod 57905 9 dm_multipath,dm_snapshot,dm_zero,dm_mirror ata_generic 14533 0 sata_nv 25285 2 libata 114288 3 pata_amd,ata_generic,sata_nv sd_mod 33345 5 scsi_mod 146553 9 osst,st,sr_mod,aic7xxx,scsi_transport_spi,sg,usb_storage,libata,sd_mod ext3 127569 2 jbd 64945 1 ext3 mbcache 15937 1 ext3 uhci_hcd 30689 0 ohci_hcd 27973 0 ehci_hcd 39245 0 dmesg gives me (refs to saa7130 are off a Compro DVB-T card) Feb 8 15:36:14 f864office kernel: ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17 Feb 8 15:36:14 f864office kernel: saa7146: found saa7146 @ mem ffffc20000abe000 (revision 1, irq 17) (0x13c2,0x1019). Feb 8 15:36:14 f864office kernel: saa7146 (0): dma buffer size 192512 Feb 8 15:36:14 f864office kernel: DVB: registering new adapter (TT-Budget S2-3200 PCI) Feb 8 15:36:14 f864office kernel: adapter has MAC addr = 00:d0:5c:61:77:b3 Feb 8 15:36:14 f864office kernel: input: Budget-CI dvb ir receiver saa7146 (0) as /class/input/input7 Feb 8 15:36:14 f864office kernel: budget_ci: CI interface initialised Feb 8 15:36:14 f864office kernel: DVB: registering new adapter (saa7130[0]) Feb 8 15:36:14 f864office kernel: DVB: registering frontend 1 (Philips TDA10046H DVB-T)... Feb 8 15:36:14 f864office kernel: tda1004x: setting up plls for 53MHz sampling clock Feb 8 15:36:14 f864office kernel: _stb0899_read_reg: Reg=[0xf000], data=82 Feb 8 15:36:14 f864office kernel: stb0899_get_dev_id: ID reg=[0x82] Feb 8 15:36:14 f864office kernel: stb0899_get_dev_id: Device ID=[8], Release=[2] Feb 8 15:36:14 f864office kernel: stb0899_get_dev_id: Demodulator Core ID=[DMD1], Version=[1] Feb 8 15:36:14 f864office kernel: stb0899_get_dev_id: FEC Core ID=[FEC1], Version=[1] Feb 8 15:36:14 f864office kernel: stb0899_attach: Attaching STB0899 Feb 8 15:36:14 f864office kernel: stb6100_attach: Attaching STB6100 Feb 8 15:36:14 f864office kernel: DVB: registering frontend 0 (STB0899 Multistandard)... Interestingly no errors re card!! Trying the hacked szap, I get [mythtv@f864office Manu szap]$ ./szap -c ~/channels.sat2 -n 1424 reading channels from file '/home/mythtv/channels.sat2' zapping to 1424 'BBC 1 London;BSkyB': sat 0, frequency = 10773 MHz H, symbolrate 22000000, vpid = 0x1388, apid = 0x1389 sid = 0x138b Querying info .. Delivery system=DVB-S using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' ----------------------------------> Using 'STB0899 DVB-S' DVB-Sstatus 00 | signal 0000 | snr 0004 | ber 00000000 | unc fffffffe | status 00 | signal 0000 | snr 0004 | ber 00000000 | unc fffffffe | status 00 | signal 0000 | snr 0004 | ber 00000000 | unc fffffffe | status 00 | signal 0000 | snr 0004 | ber 00000000 | unc fffffffe | status 00 | signal 0000 | snr 0004 | ber 00000000 | unc fffffffe | status 00 | signal 0000 | snr 0004 | ber 00000000 | unc fffffffe | status 00 | signal 0000 | snr 0004 | ber 00000000 | unc fffffffe | and this results in dmesg reporting Feb 8 15:53:44 f864office kernel: stb0899_search: delivery system=1 Feb 8 15:53:44 f864office kernel: stb0899_search: Frequency=0, Srate=0 Feb 8 15:53:44 f864office kernel: stb0899_read_status: Delivery system DVB-S/DSS Feb 8 15:53:44 f864office kernel: stb0899_search: set DVB-S params Feb 8 15:53:44 f864office kernel: stb0899_search: delivery system=1 Feb 8 15:53:44 f864office kernel: stb0899_search: Frequency=0, Srate=0 Feb 8 15:53:44 f864office kernel: stb0899_read_status: Delivery system DVB-S/DSS Feb 8 15:53:44 f864office kernel: stb0899_read_status: Delivery system DVB-S/DSS Feb 8 15:53:44 f864office kernel: _stb0899_read_reg: Reg=[0xf50d], data=00 Feb 8 15:53:45 f864office kernel: stb0899_search: set DVB-S params The most interesting parts are 15:53:44 f864office kernel: stb0899_search: Frequency=0, Srate=0 Which indicates to me that the tuning parameters are not being passed to the frontend But where to go from here???? Manu can you post your dmesg re the stb0899 after a successful channel lock? Regards Mike Curtis Hi, Le Mon, 11 Feb 2008 20:27:24 -0000, "Michael Curtis" <michael.curtis@xxxxxxxxxxxx> a écrit : > If so please let me know because I am having serious issues and really > do not know how to proceed I'm probably more beginner than you, but, if I can help... So, I've wrote a little documentation for me (including errors) : DRIVER # mkdir /opt/dvb # cd /opt/dvb # apt-get install mercurial # hg clone http://jusst.de/hg/multiproto # cd multiproto # make # make install # modprobe stb6100 # modprobe stb0899 # modprobe lnbp21 # modprobe budget-ci MAJ DU DRIVER # modprobe -r budget-ci # modprobe -r lnbp21 # modprobe -r stb0899 # modprobe -r stb6100 # cd /opt/dvb/multiproto # hg pull -u http://jusst.de/hg/multiproto # make distclean # make # make install # modprobe stb6100 # modprobe stb0899 # modprobe lnbp21 # modprobe budget-ci DMESG # dmesg saa7146: register extension 'budget_ci dvb'. ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 22 (level, low) -> IRQ 22 saa7146: found saa7146 @ mem ffffc20001598c00 (revision 1, irq 22) (0x13c2,0x1019). saa7146 (0): dma buffer size 192512 DVB: registering new adapter (TT-Budget S2-3200 PCI) adapter has MAC addr = 00:d0:5c:0b:a5:8b input: Budget-CI dvb ir receiver saa7146 (0) as /class/input/input9 budget_ci: CI interface initialised stb0899_write_regs [0xf1b6]: 02 stb0899_write_regs [0xf1c2]: 00 stb0899_write_regs [0xf1c3]: 00 _stb0899_read_reg: Reg=[0xf000], data=81 stb0899_get_dev_id: ID reg=[0x81] stb0899_get_dev_id: Device ID=[8], Release=[1] _stb0899_read_s2reg Device=[0xf3fc], Base address=[0x00000400], Offset=[0xf334], Data=[0x444d4431] _stb0899_read_s2reg Device=[0xf3fc], Base address=[0x00000400], Offset=[0xf33c], Data=[0x00000001] stb0899_get_dev_id: Demodulator Core ID=[DMD1], Version=[1] _stb0899_read_s2reg Device=[0xfafc], Base address=[0x00000800], Offset=[0xfa2c], Data=[0x46454331] _stb0899_read_s2reg Device=[0xfafc], Base address=[0x00000800], Offset=[0xfa34], Data=[0x00000001] stb0899_get_dev_id: FEC Core ID=[FEC1], Version=[1] stb0899_attach: Attaching STB0899 stb6100_attach: Attaching STB6100 DVB: registering frontend 0 (STB0899 Multistandard)... dvb_ca adaptor 0: PC card did not respond :( As you can see, I have one error left, and it seems to come from my CI module. If you have a different method, may be we can exchange ;-))) I'll try soon to scan... Hope it helps !!! Regards. David. _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
