On Mittwoch, 19. März 2008, timf wrote: > Hi all, > > On Tue, 2008-03-18 at 22:31 +0100, hermann pitton wrote: > > Hi, > > > > Am Dienstag, den 18.03.2008, 18:04 -0300 schrieb Mauro Carvalho Chehab: > > > On Wed, 19 Mar 2008 05:48:52 +0900 > > > > > > timf <timf@xxxxxxxxxxxx> wrote: > > > > 1) New install ubuntu, extract tip.tgz. > > > > > > There's no need for you to reinstall Linux for each test. This is not > > > MS**t ;) > > > > > > You don't even need to reboot. > > > > > > > [ 40.753552] saa7133[0]: i2c scan: found device @ 0xc2 [???] > > > > [ 40.864616] tuner' 2-0061: Setting mode_mask to 0x0e > > > > [ 40.864621] tuner' 2-0061: chip found @ 0xc2 (saa7133[0]) > > > > [ 40.864624] tuner' 2-0061: tuner 0x61: Tuner type absent > > > > [ 40.864658] tuner' 2-0061: Calling set_type_addr for type=0, > > > > addr=0xff, mode=0x02, config=0xffff8100 > > > > any idea somebody when that was introduced? > > > > [ 40.753552] saa7133[0]: i2c scan: found device @ 0xc2 [???] > > [ 40.864616] tuner' 2-0061: Setting mode_mask to 0x0e > > [ 40.864621] tuner' 2-0061: chip found @ 0xc2 (saa7133[0]) > > [ 40.864624] tuner' 2-0061: tuner 0x61: Tuner type absent > > [ 40.864658] tuner' 2-0061: Calling set_type_addr for type=0, > > addr=0xff, mode=0x02, config=0xffff8100 > > [ 40.864662] tuner' 2-0061: set addr for type -1 > > [ 40.876586] tuner-simple 2-0061: creating new instance > > [ 40.876589] tuner-simple 2-0061: type set to 0 (Temic PAL (4002 FH5)) > > > > Out of historical cruft TUNER_ABSENT is tuner type 4. > > > > > mode=0x02 is radio. > > > > > > Try to add this to the struct: > > > > > > .radio_type = UNSET, > > > > > > > 3) No DVB, installed tvtime - no signal. > > > > > > DVB won't work yet. What the demod inside this board? There's no setup > > > for it. > > > > Cheers, > > Hermann > > Nope, could't get anything to work. > - blacklisted tuner_xc3028 - no diff still locked up at boot > - dbg - no module loaded > Blacklisting will only work for modules modprobe is called for. These days udev does call modprobe so for this to work you need to blacklist saa7134 module. Or: You stop module autoloading in general if your distro offers this option. Regards Matthias -- Matthias Schwarzott (zzam) _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb