On 03/19/2008 12:12 AM, Faruk A wrote: > TechnoTrend TT-connect S2-3650 CI > Vendor ID: 0b48 > Product ID: 300a > http://www.technotrend.de/2715/TT-connect__S2-3650_CI.html > > Hi > > This my first DVB card i bought it two weeks ago and it works great in > windows, I knew it was unsupported in Linux but it was cheap and plus > CI :) i couldn't resist. > > I saw Dominik Kuhlen's Pinnacle 452e and André Weidemann's TT-connect > S2-3600 patch and i thought why not try it and i did. All i did was > change product id from 3007 to 300a, downloaded the the source, > patched it and compiled. > > cd v4l > insmod dvb-core.ko > insmod dvb-pll.ko > insmod stb6100.ko verbose=0 > insmod stb0899.ko verbose=0 > insmod lnbp22.ko > insmod dvb-usb.ko > insmod dvb-usb-pctv452e.ko > ............................................. > dmesg > > dvb-usb: found a 'Technotrend TT connect S2-3600' in warm state. > pctv452e_power_ctrl: 1 > dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. > DVB: registering new adapter (Technotrend TT connect S2-3600) > pctv452e_frontend_attach Enter > stb0899_write_regs [0xf1b6]: 02 > stb0899_write_regs [0xf1c2]: 00 > stb0899_write_regs [0xf1c3]: 00 > stb0899_write_regs [0xf141]: 02 > _stb0899_read_reg: Reg=[0xf000], data=82 > stb0899_get_dev_id: ID reg=[0x82] > stb0899_get_dev_id: Device ID=[8], Release=[2] > _stb0899_read_s2reg Device=[0xf3fc], Base address=[0x00000400], > Offset=[0xf334], Data=[0x444d4431] > _stb0899_read_s2reg Device=[0xf3fc], Base address=[0x00000400], > Offset=[0xf33c], Data=[0x00000001] > stb0899_get_dev_id: Demodulator Core ID=[DMD1], Version=[1] > _stb0899_read_s2reg Device=[0xfafc], Base address=[0x00000800], > Offset=[0xfa2c], Data=[0x46454331] > _stb0899_read_s2reg Device=[0xfafc], Base address=[0x00000800], > Offset=[0xfa34], Data=[0x00000001] > stb0899_get_dev_id: FEC Core ID=[FEC1], Version=[1] > stb0899_attach: Attaching STB0899 > lnbp22_set_voltage: 2 (18V=1 13V=0) > lnbp22_set_voltage: 0x60) > pctv452e_frontend_attach Leave Ok > DVB: registering frontend 0 (STB0899 Multistandard)... > pctv452e_tuner_attach Enter > stb6100_attach: Attaching STB6100 > pctv452e_tuner_attach Leave > input: IR-receiver inside an USB DVB receiver as > /devices/pci0000:00/0000:00:1d.7/usb5/5-4/input/input8 > dvb-usb: schedule remote query interval to 500 msecs. > pctv452e_power_ctrl: 0 > dvb-usb: Technotrend TT connect S2-3600 successfully initialized and connected. > usbcore: registered new interface driver pctv452e > ................................................................. > > ls /dev/dvb/adapter0/ > demux0 dvr0 frontend0 net0 > ......................................................................... > I can scan the channels using patched scan program but vdr format > output doesn't work, it just make > empty channels.conf file. The zap format works :) > > I can lock to lnb1 (Thor 1W) lnb2 (Sirius 5E) lnb3 (Hotbird 13E) lnb4 > (Astra 19E) using the patched szap but when i wanna lock to channels > on different satellite i have to always first lock on lnb1 (Thor). > One more thing it doesn't lock with multiproto changeset 7208 and above. > > No CI support and remote control is like 80% percent working. > ................................................................................................................................. > I have tried vdr with this card not good at all :( or maybe its just > me. As i mentioned before the scan > program doesn't produce the vdr format. I had to use vdr settings from > this site http://www.linowsat.com. > > When i start vdr it doesn't lock to any channels or satellite just > plain no signal, I have have to first szap -r "any channels on lnb1" > kill it and start vdr i can only get pictures from only 2 FTA channels > BBC World;Telenor:11325:hC78:S1.0W:24500:513:644=eng:577:0:1001:70:25:0 > Gospel Channel Europe;Telenor:11325:hC78:S1.0W:24500:514:648=eng:0:0:129:70:25:0 > i can't switch to different satellite just plain no signal maybe wrong > diseqc settings? > > This is what i have in diseqc.conf > # Input 1 - Thor - uncommited switch input 1 > > S1W 11700 V 9750 t v W15 [E0 10 39 F0] W125 [E0 10 38 F0] W15 t > S1W 99999 V 10600 t v W15 [E0 10 39 F0] W125 [E0 10 38 F0] W15 T > S1W 11700 H 9750 t V W15 [E0 10 39 F0] W125 [E0 10 38 F0] W15 t > S1W 99999 H 10600 t V W15 [E0 10 39 F0] W125 [E0 10 38 F0] W15 T > > # Input 2 - Sirius 5.0E - uncommited switch input 1 > > S5E 11700 V 9750 t v W15 [E0 10 39 F0] W125 [E0 10 38 F4] W15 t > S5E 99999 V 10600 t v W15 [E0 10 39 F0] W125 [E0 10 38 F4] W15 T > S5E 11700 H 9750 t V W15 [E0 10 39 F0] W125 [E0 10 38 F4] W15 t > S5E 99999 H 10600 t V W15 [E0 10 39 F0] W125 [E0 10 38 F4] W15 T > > # Input 3 - Hotbird - uncommited switch input 1 > > S13E 11700 V 9750 t v W15 [E0 10 39 F0] W125 [E0 10 38 F8] W15 t > S13E 99999 V 10600 t v W15 [E0 10 39 F0] W125 [E0 10 38 F8] W15 T > S13E 11700 H 9750 t V W15 [E0 10 39 F0] W125 [E0 10 38 F8] W15 t > S13E 99999 H 10600 t V W15 [E0 10 39 F0] W125 [E0 10 38 F8] W15 T > > # Input 4 Astra 1 19.2E - uncommited switch input 1 > > S19.2E 11700 V 9750 t v W15 [E0 10 39 F0] W125 [E0 10 38 FC] W15 t > S19.2E 99999 V 10600 t v W15 [E0 10 39 F0] W125 [E0 10 38 FC] W15 T > S19.2E 11700 H 9750 t V W15 [E0 10 39 F0] W125 [E0 10 38 FC] W15 t > S19.2E 99999 H 10600 t V W15 [E0 10 39 F0] W125 [E0 10 38 FC] W15 T > ..................................................................................................................... > In Windows with Alt-DVB > > Type: Commited LNB: 1 Raw command: E0 10 38 F0 > Type: Commited LNB: 2 Raw command: E0 10 38 F4 > Type: Commited LNB: 3 Raw command: E0 10 38 F8 > Type: Commited LNB: 4 Raw command: E0 10 38 FC > ...................................................................................................................... > > > Anybody wanna works on this this? I'd be willing to help in any way I can. > > Best regards, > Faruk > > > ------------------------------------------------------------------------ > > _______________________________________________ > linux-dvb mailing list > linux-dvb@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb I don't know diseqc.conf (VDR-specific?) or VDR, but the comment says "uncommited switch input 1" everywhere and I see two DiSEqC messages (most likely one for an uncommitted switch, and the other to switch the committed switch behind that). You most likely have no uncommitted switches, and if you did you wouldn't need any. You only have one simple 4/1 committed switch. Uncommitted only comes in when you need more than 4 LNBs and means you will use DiSEqC 1.1. You don't use or need that, you only need DiSeqC 1.0. _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
