TechnoTrend TT-connect S2-3650 CI
Vendor ID: 0b48
Product ID: 300a
http://www.technotrend.de/2715/TT-connect__S2-3650_CI.html
Hi
This my first DVB card i bought it two weeks ago and it works great in
windows, I knew it was unsupported in Linux but it was cheap and plus
CI :) i couldn't resist.
I saw Dominik Kuhlen's Pinnacle 452e and André Weidemann's TT-connect
S2-3600 patch and i thought why not try it and i did. All i did was
change product id from 3007 to 300a, downloaded the the source,
patched it and compiled.
cd v4l
insmod dvb-core.ko
insmod dvb-pll.ko
insmod stb6100.ko verbose=0
insmod stb0899.ko verbose=0
insmod lnbp22.ko
insmod dvb-usb.ko
insmod dvb-usb-pctv452e.ko
.............................................
dmesg
dvb-usb: found a 'Technotrend TT connect S2-3600' in warm state.
pctv452e_power_ctrl: 1
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Technotrend TT connect S2-3600)
pctv452e_frontend_attach Enter
stb0899_write_regs [0xf1b6]: 02
stb0899_write_regs [0xf1c2]: 00
stb0899_write_regs [0xf1c3]: 00
stb0899_write_regs [0xf141]: 02
_stb0899_read_reg: Reg=[0xf000], data=82
stb0899_get_dev_id: ID reg=[0x82]
stb0899_get_dev_id: Device ID=[8], Release=[2]
_stb0899_read_s2reg Device=[0xf3fc], Base address=[0x00000400],
Offset=[0xf334], Data=[0x444d4431]
_stb0899_read_s2reg Device=[0xf3fc], Base address=[0x00000400],
Offset=[0xf33c], Data=[0x00000001]
stb0899_get_dev_id: Demodulator Core ID=[DMD1], Version=[1]
_stb0899_read_s2reg Device=[0xfafc], Base address=[0x00000800],
Offset=[0xfa2c], Data=[0x46454331]
_stb0899_read_s2reg Device=[0xfafc], Base address=[0x00000800],
Offset=[0xfa34], Data=[0x00000001]
stb0899_get_dev_id: FEC Core ID=[FEC1], Version=[1]
stb0899_attach: Attaching STB0899
lnbp22_set_voltage: 2 (18V=1 13V=0)
lnbp22_set_voltage: 0x60)
pctv452e_frontend_attach Leave Ok
DVB: registering frontend 0 (STB0899 Multistandard)...
pctv452e_tuner_attach Enter
stb6100_attach: Attaching STB6100
pctv452e_tuner_attach Leave
input: IR-receiver inside an USB DVB receiver as
/devices/pci0000:00/0000:00:1d.7/usb5/5-4/input/input8
dvb-usb: schedule remote query interval to 500 msecs.
pctv452e_power_ctrl: 0
dvb-usb: Technotrend TT connect S2-3600 successfully initialized and connected.
usbcore: registered new interface driver pctv452e
.................................................................
ls /dev/dvb/adapter0/
demux0 dvr0 frontend0 net0
.........................................................................
I can scan the channels using patched scan program but vdr format
output doesn't work, it just make
empty channels.conf file. The zap format works :)
I can lock to lnb1 (Thor 1W) lnb2 (Sirius 5E) lnb3 (Hotbird 13E) lnb4
(Astra 19E) using the patched szap but when i wanna lock to channels
on different satellite i have to always first lock on lnb1 (Thor).
One more thing it doesn't lock with multiproto changeset 7208 and above.
No CI support and remote control is like 80% percent working.
.................................................................................................................................
I have tried vdr with this card not good at all :( or maybe its just
me. As i mentioned before the scan
program doesn't produce the vdr format. I had to use vdr settings from
this site http://www.linowsat.com.
When i start vdr it doesn't lock to any channels or satellite just
plain no signal, I have have to first szap -r "any channels on lnb1"
kill it and start vdr i can only get pictures from only 2 FTA channels
BBC World;Telenor:11325:hC78:S1.0W:24500:513:644=eng:577:0:1001:70:25:0
Gospel Channel Europe;Telenor:11325:hC78:S1.0W:24500:514:648=eng:0:0:129:70:25:0
i can't switch to different satellite just plain no signal maybe wrong
diseqc settings?
This is what i have in diseqc.conf
# Input 1 - Thor - uncommited switch input 1
S1W 11700 V 9750 t v W15 [E0 10 39 F0] W125 [E0 10 38 F0] W15 t
S1W 99999 V 10600 t v W15 [E0 10 39 F0] W125 [E0 10 38 F0] W15 T
S1W 11700 H 9750 t V W15 [E0 10 39 F0] W125 [E0 10 38 F0] W15 t
S1W 99999 H 10600 t V W15 [E0 10 39 F0] W125 [E0 10 38 F0] W15 T
# Input 2 - Sirius 5.0E - uncommited switch input 1
S5E 11700 V 9750 t v W15 [E0 10 39 F0] W125 [E0 10 38 F4] W15 t
S5E 99999 V 10600 t v W15 [E0 10 39 F0] W125 [E0 10 38 F4] W15 T
S5E 11700 H 9750 t V W15 [E0 10 39 F0] W125 [E0 10 38 F4] W15 t
S5E 99999 H 10600 t V W15 [E0 10 39 F0] W125 [E0 10 38 F4] W15 T
# Input 3 - Hotbird - uncommited switch input 1
S13E 11700 V 9750 t v W15 [E0 10 39 F0] W125 [E0 10 38 F8] W15 t
S13E 99999 V 10600 t v W15 [E0 10 39 F0] W125 [E0 10 38 F8] W15 T
S13E 11700 H 9750 t V W15 [E0 10 39 F0] W125 [E0 10 38 F8] W15 t
S13E 99999 H 10600 t V W15 [E0 10 39 F0] W125 [E0 10 38 F8] W15 T
# Input 4 Astra 1 19.2E - uncommited switch input 1
S19.2E 11700 V 9750 t v W15 [E0 10 39 F0] W125 [E0 10 38 FC] W15 t
S19.2E 99999 V 10600 t v W15 [E0 10 39 F0] W125 [E0 10 38 FC] W15 T
S19.2E 11700 H 9750 t V W15 [E0 10 39 F0] W125 [E0 10 38 FC] W15 t
S19.2E 99999 H 10600 t V W15 [E0 10 39 F0] W125 [E0 10 38 FC] W15 T
.....................................................................................................................
In Windows with Alt-DVB
Type: Commited LNB: 1 Raw command: E0 10 38 F0
Type: Commited LNB: 2 Raw command: E0 10 38 F4
Type: Commited LNB: 3 Raw command: E0 10 38 F8
Type: Commited LNB: 4 Raw command: E0 10 38 FC
......................................................................................................................
Anybody wanna works on this this? I'd be willing to help in any way I can.
Best regards,
Faruk
Linux version 2.6.24-ARCH (root@T-POWA-LX) (gcc version 4.2.3) #1 SMP PREEMPT Wed Mar 5 12:07:52 UTC 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000005f686c00 (usable)
BIOS-e820: 000000005f686c00 - 000000005f688c00 (ACPI NVS)
BIOS-e820: 000000005f688c00 - 000000005f68ac00 (ACPI data)
BIOS-e820: 000000005f68ac00 - 0000000060000000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
630MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000fe710
Entering add_active_range(0, 0, 390790) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 390790
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 390790
On node 0 totalpages: 390790
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 1261 pages used for memmap
HighMem zone: 160153 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
DMI 2.3 present.
ACPI: RSDP 000FEB00, 0024 (r2 DELL )
ACPI: XSDT 000FD257, 005C (r1 DELL GX620 7 ASL 61)
ACPI: FACP 000FD34F, 00F4 (r3 DELL GX620 7 ASL 61)
ACPI: DSDT FFFD4952, 3DA4 (r1 DELL dt_ex 1000 INTL 20050309)
ACPI: FACS 5F686C00, 0040
ACPI: SSDT FFFD8815, 00AA (r1 DELL st_ex 1000 INTL 20050309)
ACPI: APIC 000FD443, 0072 (r1 DELL GX620 7 ASL 61)
ACPI: BOOT 000FD4B5, 0028 (r1 DELL GX620 7 ASL 61)
ACPI: ASF! 000FD4DD, 0067 (r16 DELL GX620 7 ASL 61)
ACPI: MCFG 000FD544, 003E (r1 DELL GX620 7 ASL 61)
ACPI: HPET 000FD582, 0038 (r1 DELL GX620 7 ASL 61)
ACPI: DMI detected: Dell
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 70000000 (gap: 60000000:90000000)
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 387737
Kernel command line: root=/dev/sda1 ro quiet vga=792
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2793.170 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1542744k/1563160k available (2498k kernel code, 19144k reserved, 852k data, 296k init, 645656k highmem)
virtual kernel memory layout:
fixmap : 0xfff80000 - 0xfffff000 ( 508 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc044b000 - 0xc0495000 ( 296 kB)
.data : 0xc03709df - 0xc0445cdc ( 852 kB)
.text : 0xc0100000 - 0xc03709df (2498 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
hpet clockevent registered
Calibrating delay using timer specific routine.. 5592.54 BogoMIPS (lpj=9317674)
Security Framework initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000001 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebfbff 20100000 00000000 0000b180 0000641d 00000000 00000001 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
CPU0: Thermal monitoring enabled
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Early unpacking initramfs... done
ACPI: Core revision 20070126
ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
CPU0: Intel(R) Pentium(R) D CPU 2.80GHz stepping 07
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5588.03 BogoMIPS (lpj=9310459)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000001 00000000
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfebfbff 20100000 00000000 0000b180 0000641d 00000000 00000001 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Pentium(R) D CPU 2.80GHz stepping 07
Total of 2 processors activated (11181.58 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
net_namespace: 64 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub without MMCONFIG support.
PCI: PCI BIOS revision 2.10 entry at 0xfb89c, last bus=3
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored via DMI
ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@xxxxxxxxxxxxxxx
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 0880-08bf claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnpacpi: exceeded the max number of IO resources: 40
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
ACPI: RTC can wake from S4
Time: tsc clocksource has been installed.
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
system 00:01: ioport range 0x800-0x85f has been reserved
system 00:01: ioport range 0xc00-0xc7f has been reserved
system 00:01: ioport range 0x860-0x8ff could not be reserved
system 00:08: iomem range 0x0-0x9ffff could not be reserved
system 00:08: iomem range 0x100000-0xffffff could not be reserved
system 00:08: iomem range 0x1000000-0x5f686bff could not be reserved
system 00:08: iomem range 0xf0000-0xfffff could not be reserved
system 00:08: iomem range 0xc0000-0xcffff could not be reserved
system 00:08: iomem range 0xfec00000-0xfecfffff could not be reserved
system 00:08: iomem range 0xfee00000-0xfeefffff could not be reserved
system 00:08: iomem range 0xfed20000-0xfed9ffff could not be reserved
system 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved
system 00:08: iomem range 0xffc00000-0xffffffff could not be reserved
system 00:09: ioport range 0x100-0x1fe could not be reserved
system 00:09: ioport range 0x200-0x277 has been reserved
system 00:09: ioport range 0x280-0x2e7 has been reserved
system 00:09: ioport range 0x2f0-0x2f7 has been reserved
system 00:09: ioport range 0x300-0x377 could not be reserved
system 00:09: ioport range 0x380-0x3bb has been reserved
system 00:09: ioport range 0x3c0-0x3e7 has been reserved
system 00:09: ioport range 0x3f6-0x3f7 could not be reserved
system 00:09: ioport range 0x400-0x4cf has been reserved
system 00:09: ioport range 0x4d2-0x57f has been reserved
system 00:09: ioport range 0x580-0x677 has been reserved
system 00:09: ioport range 0x680-0x777 has been reserved
system 00:09: ioport range 0x780-0x7bb has been reserved
system 00:09: ioport range 0x7c0-0x7ff has been reserved
system 00:09: ioport range 0x8e0-0x8ff has been reserved
system 00:09: ioport range 0x900-0x9fe has been reserved
system 00:09: ioport range 0xa00-0xafe has been reserved
system 00:09: ioport range 0xb00-0xbfe has been reserved
system 00:09: ioport range 0xc80-0xcaf has been reserved
system 00:09: ioport range 0xcb0-0xcbf has been reserved
system 00:09: ioport range 0xcc0-0xcf7 has been reserved
system 00:09: ioport range 0xd00-0xdfe has been reserved
system 00:09: ioport range 0xe00-0xefe has been reserved
system 00:09: ioport range 0xf00-0xffe has been reserved
system 00:09: ioport range 0x2000-0x20fe has been reserved
system 00:09: ioport range 0x2100-0x21fe has been reserved
system 00:09: ioport range 0x2200-0x22fe has been reserved
system 00:09: ioport range 0x2300-0x23fe has been reserved
system 00:09: ioport range 0x2400-0x24fe has been reserved
system 00:09: ioport range 0x2500-0x25fe has been reserved
system 00:09: ioport range 0x2600-0x26fe has been reserved
system 00:09: ioport range 0x2700-0x27fe has been reserved
system 00:09: ioport range 0x2800-0x28fe has been reserved
system 00:09: ioport range 0x2900-0x29fe has been reserved
system 00:09: ioport range 0x2a00-0x2afe has been reserved
system 00:09: ioport range 0x2b00-0x2bfe has been reserved
system 00:09: ioport range 0x2c00-0x2cfe has been reserved
system 00:09: ioport range 0x2d00-0x2dfe has been reserved
system 00:09: ioport range 0x2e00-0x2efe has been reserved
system 00:09: ioport range 0x2f00-0x2ffe has been reserved
system 00:09: iomem range 0xf0000000-0xf3ffffff could not be reserved
system 00:09: iomem range 0xfeda0000-0xfedacfff has been reserved
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: fe900000-fe9fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.1
IO window: disabled.
MEM window: fe800000-fe8fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 1434k freed
Simple Boot Flag at 0x7a set to 0x1
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:02.0
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
vesafb: framebuffer at 0xe0000000, mapped to 0xf8880000, using 6144k, total 7872k
vesafb: mode is 1024x768x32, linelength=4096, pages=1
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Using IPI No-Shortcut mode
Freeing unused kernel memory: 296k freed
libata version 3.00 loaded.
ata_piix 0000:00:1f.1: version 2.12
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ata1.00: ATAPI: _NEC DVD+/-RW ND-6650A, 102C, max UDMA/33
ata1.00: configured for UDMA/33
ata2: port disabled. ignoring.
scsi 0:0:0:0: CD-ROM _NEC DVD+-RW ND-6650A 102C PQ: 0 ANSI: 5
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfea0 irq 18
ata4: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfea8 irq 18
ata3.00: ATA-7: SAMSUNG HD160JJ/P, ZM100-34, max UDMA7
ata3.00: 312500000 sectors, multi 8: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD160JJ/ ZM10 PQ: 0 ANSI: 5
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000ff80
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000ff60
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
usb 1-1: new full speed USB device using uhci_hcd and address 2
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000ff40
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 22, io base 0x0000ff20
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 7 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 19, io mem 0xffa80800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
hub 1-1:1.0: hub_port_status failed (err = -71)
hub 1-1:1.0: hub_port_status failed (err = -71)
hub 1-1:1.0: hub_port_status failed (err = -71)
hub 1-1:1.0: hub_port_status failed (err = -71)
hub 1-1:1.0: hub_port_status failed (err = -71)
hub 1-1:1.0: hub_port_status failed (err = -71)
hub 1-1:1.0: hub_port_status failed (err = -71)
Driver 'sd' needs updating - please use bus_type methods
sd 2:0:0:0: [sda] 312500000 512-byte hardware sectors (160000 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 312500000 512-byte hardware sectors (160000 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:<4>Driver 'sr' needs updating - please use bus_type methods
sda1 sda2 sda3 sda4
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sd 2:0:0:0: [sda] Attached SCSI disk
usb 5-4: new high speed USB device using ehci_hcd and address 3
usb 5-4: configuration #1 chosen from 1 choice
usb 1-1: USB disconnect, address 2
usb 1-1: new full speed USB device using uhci_hcd and address 3
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 7 ports detected
usb 1-1.1: new low speed USB device using uhci_hcd and address 4
usb 1-1.1: configuration #1 chosen from 1 choice
usb 1-1.5: new low speed USB device using uhci_hcd and address 5
usb 1-1.5: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: HID 04d9:1400 as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input1
input,hidraw0: USB HID v1.10 Keyboard [HID 04d9:1400] on usb-0000:00:1d.0-1.1
input: HID 04d9:1400 as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.1/1-1.1:1.1/input/input2
input,hidraw1: USB HID v1.10 Mouse [HID 04d9:1400] on usb-0000:00:1d.0-1.1
input: USB KVM Switch USB KVM Switch as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input3
input,hidraw2: USB HID v1.10 Keyboard [USB KVM Switch USB KVM Switch] on usb-0000:00:1d.0-1.5
input: USB KVM Switch USB KVM Switch as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.5/1-1.5:1.1/input/input4
input,hidraw3: USB HID v1.10 Mouse [USB KVM Switch USB KVM Switch] on usb-0000:00:1d.0-1.5
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
input: Power Button (FF) as /devices/virtual/input/input5
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/virtual/input/input6
ACPI: Power Button (CM) [VBTN]
ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
sr 0:0:0:0: Attached scsi generic sg0 type 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
Linux agpgart interface v0.102
tg3.c:v3.86 (November 9, 2007)
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:01:00.0 to 64
agpgart: Detected an Intel 945G Chipset.
agpgart: Detected 7932K stolen memory.
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets
intelfb: Version 0.9.4
agpgart: AGP aperture is 256M @ 0xe0000000
eth0: Tigon3 [partno(BCM5751PKFBG) rev 4001 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:13:72:e9:3e:69
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
intelfb: Cannot reserve FB region.
intel_rng: Firmware space is locked read-only. If you can't or
intel_rng: don't want to disable this in firmware setup, and if
intel_rng: you are certain that your system has a functional
intel_rng: RNG, try using the 'no_fwh_detect' option.
input: PC Speaker as /devices/platform/pcspkr/input/input7
lp: driver loaded but no devices found
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
PPP generic driver version 2.4.2
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day
ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 23 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1e.2 to 64
ppdev: user-space parallel port driver
intel8x0_measure_ac97_clock: measured 50262 usecs
intel8x0: clocking to 48000
EXT3 FS on sda1, internal journal
Adding 530136k swap on /dev/sda2. Priority:-1 extents:1 across:530136k
tg3: eth0: Link is up at 100 Mbps, full duplex.
tg3: eth0: Flow control is on for TX and on for RX.
lirc_dev: IR Remote Control driver registered, major 61
lirc_serial: auto-detected active high receiver
lirc_dev: lirc_register_plugin: sample_rate: 0
[drm] Initialized drm 1.1.0 20060810
PCI: Setting latency timer of device 0000:00:02.0 to 64
[drm] Initialized i915 1.6.0 20060119 on minor 0
fuse init (API version 7.9)
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sda4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present
dvb-usb: found a 'Technotrend TT connect S2-3600' in warm state.
pctv452e_power_ctrl: 1
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Technotrend TT connect S2-3600)
pctv452e_frontend_attach Enter
stb0899_write_regs [0xf1b6]: 02
stb0899_write_regs [0xf1c2]: 00
stb0899_write_regs [0xf1c3]: 00
stb0899_write_regs [0xf141]: 02
_stb0899_read_reg: Reg=[0xf000], data=82
stb0899_get_dev_id: ID reg=[0x82]
stb0899_get_dev_id: Device ID=[8], Release=[2]
_stb0899_read_s2reg Device=[0xf3fc], Base address=[0x00000400], Offset=[0xf334], Data=[0x444d4431]
_stb0899_read_s2reg Device=[0xf3fc], Base address=[0x00000400], Offset=[0xf33c], Data=[0x00000001]
stb0899_get_dev_id: Demodulator Core ID=[DMD1], Version=[1]
_stb0899_read_s2reg Device=[0xfafc], Base address=[0x00000800], Offset=[0xfa2c], Data=[0x46454331]
_stb0899_read_s2reg Device=[0xfafc], Base address=[0x00000800], Offset=[0xfa34], Data=[0x00000001]
stb0899_get_dev_id: FEC Core ID=[FEC1], Version=[1]
stb0899_attach: Attaching STB0899
lnbp22_set_voltage: 2 (18V=1 13V=0)
lnbp22_set_voltage: 0x60)
pctv452e_frontend_attach Leave Ok
DVB: registering frontend 0 (STB0899 Multistandard)...
pctv452e_tuner_attach Enter
stb6100_attach: Attaching STB6100
pctv452e_tuner_attach Leave
input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb5/5-4/input/input8
dvb-usb: schedule remote query interval to 500 msecs.
pctv452e_power_ctrl: 0
dvb-usb: Technotrend TT connect S2-3600 successfully initialized and connected.
usbcore: registered new interface driver pctv452e
Module Size Used by
dvb_usb_pctv452e 14468 0
dvb_usb 18956 1 dvb_usb_pctv452e
lnbp22 2816 1
stb0899 35072 1
stb6100 7684 1
dvb_pll 12168 0
dvb_core 80380 1 dvb_usb
ipv6 248644 10
fuse 42260 2
i915 22144 2
drm 70548 3 i915
lirc_serial 12036 0
lirc_dev 12116 1 lirc_serial
snd_seq_oss 29440 0
snd_seq_midi_event 6528 1 snd_seq_oss
snd_seq 47056 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 6924 2 snd_seq_oss,snd_seq
snd_pcm_oss 37024 0
snd_mixer_oss 14464 1 snd_pcm_oss
snd_intel8x0 28572 1
snd_ac97_codec 95268 1 snd_intel8x0
ppdev 7556 0
serio_raw 5636 0
rtc_cmos 7584 0
ppp_generic 23828 0
ac97_bus 2176 1 snd_ac97_codec
snd_pcm 68996 3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec
i2c_i801 8848 0
lp 9220 0
parport 31432 2 ppdev,lp
psmouse 36496 0
slhc 5632 1 ppp_generic
rtc_core 15496 1 rtc_cmos
rtc_lib 2944 1 rtc_core
snd_timer 19204 2 snd_seq,snd_pcm
snd 44772 11 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
pcspkr 2944 0
soundcore 6368 1 snd
snd_page_alloc 8072 2 snd_intel8x0,snd_pcm
intelfb 34468 0
i2c_algo_bit 5892 1 intelfb
intel_agp 21780 1
tg3 109700 0
agpgart 27352 4 drm,intelfb,intel_agp
i2c_core 19328 8 dvb_usb,lnbp22,stb0899,stb6100,dvb_pll,i2c_i801,intelfb,i2c_algo_bit
sg 26640 0
evdev 9344 12
thermal 13084 0
processor 29400 1 thermal
fan 3844 0
button 6544 0
battery 10756 0
ac 4612 0
usbhid 41024 0
hid 34304 1 usbhid
ff_memless 5128 1 usbhid
ext3 121992 2
jbd 43412 1 ext3
mbcache 6912 1 ext3
sr_mod 15012 0
cdrom 33824 1 sr_mod
sd_mod 22784 5
pata_acpi 5248 0
ehci_hcd 32524 0
uhci_hcd 22672 0
usbcore 125420 6 dvb_usb_pctv452e,dvb_usb,usbhid,ehci_hcd,uhci_hcd
ata_piix 14724 4
ata_generic 5252 0
libata 138352 3 pata_acpi,ata_piix,ata_generic
Bus 005 Device 003: ID 0b48:300a TechnoTrend AG
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0b48 TechnoTrend AG
idProduct 0x300a
bcdDevice 1.01
iManufacturer 1
iProduct 2
iSerial 3
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 249
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 10mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0000 1x 0 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x038e 1x 910 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 2
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0234 1x 564 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 3
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x03ac 1x 940 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 4
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0a80 2x 640 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 5
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0c00 2x 1024 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 6
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x1340 3x 832 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 7
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x1400 3x 1024 bytes
bInterval 1
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
