Hello, Now, I don't have to use modem to connect internet,But, I very thank you for your help. I wish your team to have all good things in life. :) Tour. > Tou > > RE: Modem Port Scan<*1>: S0 S1 S2 S3 Segmentation fault > It seems that the dkms-agrsm driver variant are not compatible with > your System. > > Best do: > $ sudo apt-get remove dkms-agrsm agrsm-tools > > Afterwards reboot and retry the modem with the slmodemd activation as > before. > After the usual failure in dialout, do > $ dmesg > tour.txt > and send it to me. I'll send a bug report to the snd-hda-intel > maintainer. > Howfully this will result in a fix in some future snd-hda-intel update. > > MarvS > > 2009/5/2 Patompong Kumdang <u500910052@xxxxxx>: >> MarvS, >> This is my agrsm-test's message. >> >> root@tour-laptop:/home/tour# sudo agrsm-test >> >> Found drivers for boot kernel 2.6.28-11-generic at: >> /lib/modules/2.6.28-11-generic/extra/agrserial.ko >> /lib/modules/2.6.28-11-generic/extra/agrmodem.ko >> >> >> >> WARNING: All config files need .conf: /etc/modprobe.d/agrsm, it will be >> ignored in a future release. >> WARNING: All config files need .conf: /etc/modprobe.d/agrsm, it will be >> ignored in a future release. >> WARNING: All config files need .conf: /etc/modprobe.d/agrsm, it will be >> ignored in a future release. >> Loading drivers: >> WARNING: All config files need .conf: /etc/modprobe.d/agrsm, it will be >> ignored in a future release. >> WARNING: All config files need .conf: /etc/modprobe.d/agrsm, it will be >> ignored in a future release. >> WARNING: All config files need .conf: /etc/modprobe.d/agrsm, it will be >> ignored in a future release. >> >> Drivers loaded: >> agrserial 18848 0 >> agrmodem 1192868 1 agrserial >> >> and symbolic link created: >> lrwxrwxrwx 1 root root 12 2009-05-02 15:58 /dev/ttySAGR -> /dev/ttyAGS3 >> >> Checking for utility wvdialconf >> Found /usr/bin/wvdialconf, preparing to run: >> wvdialconf /etc/wvdial.conf >> A file /etc/wvdial.conf already exists, first renaming to >> /etc/wvdial.200905025805 >> >> Modem Port Scan<*1>: S0 S1 S2 S3 Segmentation fault >> >> A reboot may be necessary before modem detection through: >> sudo modprobe agrserial >> Which will load agrmodem, agrserial and create the symbolic link needed >> for: >> sudo wvdialconf >> >> >> The installation record has been written to ./agrsm-test.txt >> >> >> root@tour-laptop:/home/tour# >> >> >> >> >> >>> Tour, >>> >>> Upon rebooting, retry >>> $ sudo agrsm-test >>> >>> Sometimes this reboot is necessary. >>> >>> MarvS >>> >>> 2009/4/30 Patompong Kumdang <u500910052@xxxxxx>: >>>> MarvS, >>>> >>>> I think that driver not support my modem? >>>> when I use wvdialconf it cannot find my modem, >>>> And when I plugget in my telephone line, It use signal from >>>> telephone all the time.(but can't connect) >>>> when I try to connect by old driver, it has the same problem. >>>> >>>> Thanks for your help. :) >>>> >>>> Tour. >>>> >>>> >>>> >>>> >>>> >>>> >>>>> Bjorn >>>>> Re: Perhaps agrsm is worth a shot? >>>>> That is a good suggestion. Certainly will do no harm. >>>>> >>>>> Tour, >>>>> >>>>> FIrst install the Ubuntu package dkms. ย Then from >>>>> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ get the >>>>> dkms-agrsm_2.1.80-6_i386.deb, agrsm-howto.txt and >>>>> ย agrsm-tools_0.0.1_all.deb . ย Install the .deb packages with >>>>> $ sudo dpkg -i ย dkms*.deb agrsm*.deb >>>>> which hopefully will culminate in the modem being detected. >>>>> For understanding See the example at >>>>> http://linmodems.technion.ac.il/bigarch/archive-eighth/msg03863.html >>>>> The dkms toolset automates compiling, including compiling of needed >>>>> update drivers >>>>> >>>>> MarvS >>>>> >>>>> On Tue, Apr 28, 2009 at 7:11 AM, Bjorn Wielens <Uniacke1@xxxxxxxx> >>>>> wrote: >>>>>> Hi Marv, >>>>>> I don't have such a modem, but this may be useful for later: >>>>>> The agrsm packages with support for 11c11040 have the following >>>>>> supported devices: >>>>>> Note that the 11c11040 is not directly listed, but is identified >>>>>> through >>>>>> the audio card ID. เธข Pennnrhaps agrsm is worth a shot? >>>>>> >>>>>> เธข { 0x11C1, 0x0620, 0x0000, 0x0000 }, >>>>>> เธข { 0x1039, 0x7013, 0x0000, 0x0000 }, >>>>>> เธข { 0x1106, 0x3068, 0x0000, 0x0000 }, >>>>>> เธข { 0x8086, 0x2668, 0x0000, 0x0000 }, //ich6 hda >>>>>> เธข { 0x8086, 0x27D8, 0x0000, 0x0000 }, //ich7 hda >>>>>> เธข { 0x8086, 0x284B, 0x0000, 0x0000 }, //ich8 hda >>>>>> เธข { 0x8086, 0x269a, 0x0000, 0x0000 }, เธข /* ESB2 */ >>>>>> เธข { 0x8086, 0x293e, 0x0000, 0x0000 }, /* ICH9 */ >>>>>> เธข { 0x8086, 0x293f, 0x0000, 0x0000 }, /* ICH9 */ >>>>>> เธข { 0x1002, 0x437b, 0x0000, 0x0000 }, เธข /* ATI SB450 >>>>>> */ >>>>>> เธข { 0x1002, 0x4383, 0x0000, 0x0000 }, /* ATI SB600 */ >>>>>> เธข { 0x1002, 0x793b, 0x0000, 0x0000 }, /* ATI RS600 HDMI */ >>>>>> เธข { 0x1002, 0x7919, 0x0000, 0x0000 }, เธข /* ATI RS690 >>>>>> HDMI */ >>>>>> เธข { 0x1002, 0x960c, 0x0000, 0x0000 }, /* ATI RS780 HDMI */ >>>>>> เธข { 0x1002, 0xaa00, 0x0000, 0x0000 }, /* ATI R600 HDMI */ >>>>>> เธข { 0x1106, 0x3288, 0x0000, 0x0000 }, เธข /* VIA >>>>>> VT8251/VT8237A */ >>>>>> เธข { 0x1039, 0x7502, 0x0000, 0x0000 }, เธข /* SIS966 */ >>>>>> เธข { 0x10b9, 0x5461, 0x0000, 0x0000 }, /* ULI M5461 */ >>>>>> เธข { 0x10de, 0x026c, 0x0000, 0x0000 }, เธข /* NVIDIA >>>>>> MCP51 */ >>>>>> เธข { 0x10de, 0x0371, 0x0000, 0x0000 }, เธข /* NVIDIA >>>>>> MCP55 */ >>>>>> เธข { 0x10de, 0x03e4, 0x0000, 0x0000 }, เธข /* NVIDIA >>>>>> MCP61 */ >>>>>> เธข { 0x10de, 0x03f0, 0x0000, 0x0000 }, /* NVIDIA MCP61 */ >>>>>> เธข { 0x10de, 0x044a, 0x0000, 0x0000 }, /* NVIDIA MCP65 */ >>>>>> เธข { 0x10de, 0x044b, 0x0000, 0x0000 }, /* NVIDIA MCP65 */ >>>>>> เธข { 0x10de, 0x055c, 0x0000, 0x0000 }, เธข /* NVIDIA >>>>>> MCP67 */ >>>>>> เธข { 0x10de, 0x055d, 0x0000, 0x0000 }, เธข /* NVIDIA >>>>>> MCP67 */ >>>>>> เธข { 0x8086, 0x2416, 0x0000, 0x0000 }, >>>>>> เธข { 0x8086, 0x2426, 0x0000, 0x0000 }, >>>>>> เธข { 0x8086, 0x2446, 0x0000, 0x0000 }, >>>>>> เธข { 0x8086, 0x7196, 0x0000, 0x0000 }, >>>>>> เธข { 0x8086, 0x2486, 0x0000, 0x0000 }, >>>>>> เธข { 0x8086, 0x24C6, 0x0000, 0x0000 }, >>>>>> เธข { 0x8086, 0x24D6, 0x0000, 0x0000 }, >>>>>> เธข { 0x11C1, 0x048C, 0x0000, 0x0000 }, >>>>>> เธข { 0x11C1, 0x048F, 0x0000, 0x0000 }, >>>>>> เธข { 0x8086, 0x266D, 0x0000, 0x0000 }, >>>>>> >>>>>> Bjorn. >>>>>> >>>>>> >>>>>> Marvin Stodolsky wrote: >>>>>>> List, >>>>>>> >>>>>>> Would any of you with the Agere 0x11c13026 modem chip, hosted on a >>>>>>> High Definition Audio (HDA)card please report in. เธข What >>>>>>> are the >>>>>>> specifics of HDA card, kernel and do you have modem functionality. >>>>>>> >>>>>>> Marv S >>>>>>> >>>>>>> >>>>>>> 2009/4/27 Patompong Kumdang <u500910052@xxxxxx>: >>>>>>>> Antonio, MarvS >>>>>>>> >>>>>>>> Can I try another way to connect to internet. >>>>>>>> >>>>>>>> Tour. >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>> The MS drivers provide no additional useful information, beyond >>>>>>>>> that >>>>>>>>> of the ModemData.txt >>>>>>>>> More this evening. >>>>>>>>> >>>>>>>>> MarvS >>>>>>>>> >>>>>>>>> 2009/4/27 Patompong Kumdang <u500910052@xxxxxx>: >>>>>>>>>> Antonio, MarvS >>>>>>>>>> >>>>>>>>>> Sorry, ftp://u500910052@xxxxxxxxxxx/public_html/Modem.zip is >>>>>>>>>> broken. >>>>>>>>>> >>>>>>>>>> Please use this link to download again. >>>>>>>>>> http://mail.cm.edu/~u500910052/Modem.zip >>>>>>>>>> >>>>>>>>>> Thanks, >>>>>>>>>> Tour. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>>> Antonio, MarvS >>>>>>>>>>> >>>>>>>>>>> Can this windows driver tell you more information about my >>>>>>>>>>> modem. >>>>>>>>>>> please download these file at: >>>>>>>>>>> ftp://u500910052@xxxxxxxxxxx/public_html/Modem.zip >>>>>>>>>>> (sorry, my mail can not sent .zip file) >>>>>>>>>>> >>>>>>>>>>> Thanks, >>>>>>>>>>> Tour. >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>>> Antonio >>>>>>>>>>>> >>>>>>>>>>>> "The ALSA verion is 1.0.19" output from the scanModem script >>>>>>>>>>>> is >>>>>>>>>>>> from a >>>>>>>>>>>> call: >>>>>>>>>>>> เน€เธ�เธ� เธข >>>>>>>>>>>> เน€เธ�เธ� >> aplay --version >>>>>>>>>>>> and this is typically matched with other ALSA components of an >>>>>>>>>>>> installation. >>>>>>>>>>>> >>>>>>>>>>>> On the Ubuntu Jaunty I just upgraded to: >>>>>>>>>>>> เน€เธ�เธ� เธข >>>>>>>>>>>> เน€เธ�เธ� >> เธข เน€เธ�เธ� aplay --version >>>>>>>>>>>> aplay: version 1.0.18 by Jaroslav Kysela <perex@xxxxxxxx> >>>>>>>>>>>> So if is indeed puzzling as to why TouRs is 1.0.19 >>>>>>>>>>>> >>>>>>>>>>>> TourR, >>>>>>>>>>>> เน€เธ�เธ� เธข >>>>>>>>>>>> เน€เธ�เธ� >> Have you done any cogent alternations to >>>>>>>>>>>> your System. >>>>>>>>>>>> >>>>>>>>>>>> MarvS >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> On Sun, Apr 26, 2009 at 10:05 PM, Antonio Olivares >>>>>>>>>>>> <olivares14031@xxxxxxxxx> wrote: >>>>>>>>>>>>> Tour and Marv, >>>>>>>>>>>>> >>>>>>>>>>>>> I am trying to follow this carefully seeing where I can help, >>>>>>>>>>>>> I >>>>>>>>>>>>> see a >>>>>>>>>>>>> problem here and I do not know why this is happening? >>>>>>>>>>>>> >>>>>>>>>>>>> /usr/src/modules/alsa/alsa-driver-1.0.16/pci/hda/hda_intel.c:634: >>>>>>>>>>>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >> hda_intel: >>>>>>>>>>>>> azx_get_response >>>> timeout, switching to >>>>>>>>>>>>> polling mode: >>>>>>>>>>>>> last >>>>>>>>>>>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>>>>>>>>>>> cmd=0x10490000 >>>>>>>>>>>>> >>>>>>>>>>>>> With the old ModemData.txt and the new one just sent, the >>>>>>>>>>>>> alsa >>>>>>>>>>>>> version >>>>>>>>>>>>> is 1.0.19. >> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>>>>>>>>>>> This does not make >>>> sense. >>>>>>>>>>>>> >>>>>>>>>>>>> ===== Advanced Linux Sound Architecture (ALSA) diagnostics >>>>>>>>>>>>> ====>>>>>>>>>>>> The ALSA packages provide audio support and >>>>>>>>>>>>> also drivers for >>>>>>>>>>>>> some >>>>>>>>>>>>> modems. >>>>>>>>>>>>> ALSA diagnostics are written during bootup to /proc/asound/ >>>>>>>>>>>>> folders. >>>>>>>>>>>>> >>>>>>>>>>>>> The ALSA verion is 1.0.19 >>>>>>>>>>>>> The modem cards detected by "aplay -l" >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >> are: >>>>>>>>>>>>> card 0: Intel [HDA Intel], device 6: Si3054 Modem [Si3054 >>>>>>>>>>>>> Modem] >>>>>>>>>>>>> >>>>>>>>>>>>> The /proc/asound/pcm file reports: >>>>>>>>>>>>> ----------------------- >>>>>>>>>>>>> 00-00: ALC883 Analog : ALC883 Analog : playback 1 : capture 1 >>>>>>>>>>>>> 00-01: ALC883 Digital : ALC883 Digital : playback 1 >>>>>>>>>>>>> 00-02: ALC883 Analog : ALC883 Analog : capture 1 >>>>>>>>>>>>> 00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1 >>>>>>>>>>>>> >>>>>>>>>>>>> about /proc/asound/cards: >>>>>>>>>>>>> ------------------------ >>>>>>>>>>>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >> 0 [Intel >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >> เธข >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >> เธข >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>>>>>>>>>>> เธข >> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >> เธข >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >> ]: HDA-Intel - HDA >>>> Intel >>>>>>>>>>>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >> เธข >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >> เธข >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >> เธข >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>>>>>>>>>>> เธข >> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >> เธข >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >> เธข >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >> เธข >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>>>>>>>>>>> เธข >> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >> เธข >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >> เธข >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >> HDA >>>>>>>>>>>>> Intel at 0xd0340000 irq 22 >>>>>>>>>>>>> >>>>>>>>>>>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >> PCI slot >>>>>>>>>>>>> 00:1b.0 has a High >>>> Definition Audio Card >>>>>>>>>>>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >> The drivers >>>>>>>>>>>>> are in the kernel >>>> modules tree at: >>>>>>>>>>>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>>>>>>>>>>> /lib/modules/2.6.27-10-generic/kernel/sound/pci/hda/snd-hda-intel.ko >>>>>>>>>>>>> /lib/modules/2.6.27-11-generic/kernel/sound/pci/hda/snd-hda-intel.ko >>>>>>>>>>>>> /lib/modules/2.6.27-11-server/kernel/sound/pci/hda/snd-hda-intel.ko >>>>>>>>>>>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >> The modem >>>>>>>>>>>>> codec file for the >>>> HDA card is: >>>>>>>>>>>>> /proc/asound/card0/codec#1 >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> I am thinking also since the alsa-version is 1.0.19, >>>>>>>>>>>>> shouldn't >>>>>>>>>>>>> the >>>>>>>>>>>>> precompiled SLMODEMD.gcc4.3.tar.gz serve, a new one with >>>>>>>>>>>>> -alsa-1.0.19.tar.gz probably needs to be created? >>>>>>>>>>>>> >>>>>>>>>>>>> My $0.02 >>>>>>>>>>>>> >>>>>>>>>>>>> Regards, >>>>>>>>>>>>> >>>>>>>>>>>>> Antonio >>>>>>>>>>>>> >>>>>>>>>>>>> On 4/27/09, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> >>>>>>>>>>>>> wrote: >>>>>>>>>>>>>> Tour >>>>>>>>>>>>>> >>>>>>>>>>>>>> For the Intel537 do: >>>>>>>>>>>>>> >>>>>>>>>>>>>> $ find /lib/modules --name Intel537*.ko >>>>>>>>>>>>>> and delete any modules found. >>>>>>>>>>>>>> >>>>>>>>>>>>>> There may also be residual Intel537 files like: >>>>>>>>>>>>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >> เธข >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >> เธข >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>>>>>>>>>>>> เธข /etc/init.d/537_boot >>>>>>>>>>>>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >> เธข >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >> เธข >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>>>>>>>>>>>> เธข /etc/hamregistry.bin >>>>>>>>>>>>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >> เธข >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >> เธข >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >> เธข >>>> /usr/sbin/usrsound >>>>>>>>>>>>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >> เธข >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >> เธข >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>>>>>>>>>>>> เธข /usr/sbin/hamregistry >>>>>>>>>>>>>> that should be removed. >>>>>>>>>>>>>> >>>>>>>>>>>>>> MarvS >>>>>>>>>>>>>> >>>>>>>>>>>>>> 2009/4/26 Patompong Kumdang <u500910052@xxxxxx>: >>>>>>>>>>>>>>> hello, >>>>>>>>>>>>>>> This time I will tell you more information about my >>>>>>>>>>>>>>> computer. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Here above shows that you apparently used a USB modem >>>>>>>>>>>>>>>>>> with >>>>>>>>>>>>>>>>>>>>> device >>>>>>>>>>>>>>> /dev/ttyACM0 >>>>>>>>>>>>>>>>>> that has nothing to do with the device that you >>>>>>>>>>>>>>>>>> apparently >>>>>>>>>>>>>>>>>> need >>>>>>>>>>>>>>>>>> to >>>>>>>>>>>>>>>>>> use >>>>>>>>>>>>>>>>>> /dev/ttySL0 >>>>>>>>>>>>>>> I use mobile phone to connect to internet last week. (It >>>>>>>>>>>>>>> can >>>>>>>>>>>>>>> connect) >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Here wlan0 is another interface that is not needed when >>>>>>>>>>>>>>>>>> you >>>>>>>>>>>>>>>>>> are >>>>>>>>>>>>>>>>>> trying >>>>>>>>>>>>>>>>>> to connect with dialup. >>>>>>>>>>>>>>>>>> It needs to be shut off to troubleshoot the dialup >>>>>>>>>>>>>>>>>> connection. >>>>>>>>>>>>>>> I have wireless modem and lan card too, but I not use at >>>>>>>>>>>>>>> this >>>>>>>>>>>>>>> time. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> What is this ? >>>>>>>>>>>>>>>>>> Apr 20 14:45:38 tourcom-laptop kernel: [ >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>>>>>>>>>>>>>>>> เธข 51.034653] >>>>>>>>>>>>>>>>>> Intel537: >>>>>>>>>>>>>>>>>> disagrees about version of symbol struct_module >>>>>>>>>>>>>>>>>> Apr 20 14:45:38 tourcom-laptop kernel: [ >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>>>>>>>>>>>>>>>> เธข 51.081436] >>>>>>>>>>>>>>>>>> Intel537: >>>>>>>>>>>>>>>>>> disagrees about version of symbol struct_module >>>>>>>>>>>>>>> I don't know about this driver. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> there seems to be an Intel537 driver on your system from >>>>>>>>>>>>>>>>>> some >>>>>>>>>>>>>>>>>> previous >>>>>>>>>>>>>>> attempt, >>>>>>>>>>>>>>>>>> which may be interfering. >>>>>>>>>>>>>>>>>> Please uninstall/delete this driver from your System. >>>>>>>>>>>>>>> I don't know how to remove this driver. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> When attempting to >>>>>>>>>>>>>>>>>> connect, open a terminal and type >>>>>>>>>>>>>>>>>> $ sudo tail -f /var/log/messages >>>>>>>>>>>>>>> I have got this message >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> root@tourcom-laptop:/home/tourcom# sudo tail -f >>>>>>>>>>>>>>> /var/log/messages >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Apr 27 07:19:32 tourcom-laptop kernel: [ >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>>>>>>>>>>>>> เธข 53.691210] [drm] >>>>>>>>>>>>>>> Initialized >>>>>>>>>>>>>>> drm 1.1.0 20060810 >>>>>>>>>>>>>>> Apr 27 07:19:32 tourcom-laptop kernel: [ >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>>>>>>>>>>>>> เธข 53.698167] pci >>>>>>>>>>>>>>> 0000:00:02.0: >>>>>>>>>>>>>>> PCI INT A -> GSI 16 (level, low) -> IRQ 16 >>>>>>>>>>>>>>> Apr 27 07:19:32 tourcom-laptop kernel: [ >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>>>>>>>>>>>>> เธข 53.699489] [drm] >>>>>>>>>>>>>>> Initialized >>>>>>>>>>>>>>> i915 1.6.0 20060119 on minor 0 >>>>>>>>>>>>>>> Apr 27 07:19:33 tourcom-laptop kernel: [ >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>>>>>>>>>>>>> เธข 54.444472] sky2 >>>>>>>>>>>>>>> eth0: >>>>>>>>>>>>>>> enabling >>>>>>>>>>>>>>> interface >>>>>>>>>>>>>>> Apr 27 07:19:33 tourcom-laptop kernel: [ >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>>>>>>>>>>>>> เธข 54.447579] >>>>>>>>>>>>>>> ADDRCONF(NETDEV_UP): >>>>>>>>>>>>>>> eth0: link is not ready >>>>>>>>>>>>>>> Apr 27 07:19:37 tourcom-laptop pulseaudio[6044]: >>>>>>>>>>>>>>> ltdl-bind-now.c: >>>>>>>>>>>>>>> Failed >>>>>>>>>>>>>>> to find original dlopen loader. >>>>>>>>>>>>>>> Apr 27 07:19:37 tourcom-laptop pulseaudio[6047]: main.c: >>>>>>>>>>>>>>> setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not >>>>>>>>>>>>>>> permitted >>>>>>>>>>>>>>> Apr 27 07:19:37 tourcom-laptop pulseaudio[6047]: main.c: >>>>>>>>>>>>>>> setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not >>>>>>>>>>>>>>> permitted >>>>>>>>>>>>>>> Apr 27 07:27:37 tourcom-laptop kernel: [ >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>>>>>>>>>>>>> 538.346544] sky2 >>>>>>>>>>>>>>> eth0: >>>>>>>>>>>>>>> disabling >>>>>>>>>>>>>>> interface >>>>>>>>>>>>>>> Apr 27 07:31:26 tourcom-laptop kernel: [ >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>>>>>>>>>>>>> 766.852013] ALSA >>>>>>>>>>>>>>> /usr/src/modules/alsa/alsa-driver-1.0.16/pci/hda/hda_intel.c:634: >>>>>>>>>>>>>>> hda_intel: azx_get_response timeout, switching to polling >>>>>>>>>>>>>>> mode: >>>>>>>>>>>>>>> last >>>>>>>>>>>>>>> cmd=0x10490000 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> I sent my new scanmodem data to you. >>>>>>>>>>>>>>> please help me to follow the step that you advice with a >>>>>>>>>>>>>>> command >>>>>>>>>>>>>>> code. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Thank you, >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Tour. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Tour, >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> I looked back at your ModemData.txt sent a few days ago, >>>>>>>>>>>>>>>> it >>>>>>>>>>>>>>>> does >>>>>>>>>>>>>>>> not >>>>>>>>>>>>>>>> agree with output from scanModem :(, >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> http://www.nabble.com/Please-help-me-to-set-up-my-modem-to23204381.html >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> In the scanModem that you sent the alsa version is 1.0.19, >>>>>>>>>>>>>>>> and >>>>>>>>>>>>>>>> with >>>>>>>>>>>>>>>> the output messages that you sent it is 1.0.16 : >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Apr 24 16:19:38 tourcom-laptop kernel: [ >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>>>>>>>>>>>>>> 731.524013] ALSA >>>>>>>>>>>>>>>> /usr/src/modules/alsa/alsa-driver-1.0.16/pci/hda/hda_intel.c:634: >>>>>>>>>>>>>>>> hda_intel: azx_get_response timeout, switching to polling >>>>>>>>>>>>>>>> mode: >>>>>>>>>>>>>>>> last >>>>>>>>>>>>>>>> cmd=0x10490000 >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> would you mind sending ModemData.txt again, re run >>>>>>>>>>>>>>>> scanModem >>>>>>>>>>>>>>>> and >>>>>>>>>>>>>>>> send >>>>>>>>>>>>>>>> it back to list. >>>>>>>>>>>>>>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >> It is >>>>>>>>>>>>>>>> hard >>>> to troubleshoot with >>>>>>>>>>>>>>>> too many >>>>>>>>>>>>>>>> things >>>>>>>>>>>>>>>> going on. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Regards, >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Antonio >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On 4/26/09, Antonio Olivares <olivares14031@xxxxxxxxx> >>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>> Tour, >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> I see too many interfaces interfering with your >>>>>>>>>>>>>>>>> connection(s). >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Apr 25 17:31:34 tourcom-laptop kernel: [ >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>>>>>>>>>>>>>>> 231.792507] PPP >>>>>>>>>>>>>>>>> generic >>>>>>>>>>>>>>>>> driver version 2.4.2 >>>>>>>>>>>>>>>>> Apr 25 17:31:34 tourcom-laptop pppd[6494]: pppd 2.4.4 >>>>>>>>>>>>>>>>> started >>>>>>>>>>>>>>>>> by >>>>>>>>>>>>>>>>> root, >>>>>>>>>>>>>>>>> uid >>>>>>>>>>>>>>>>> 0 >>>>>>>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on >>>>>>>>>>>>>>>>> (BUSY) >>>>>>>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (NO >>>>>>>>>>>>>>>>> CARRIER) >>>>>>>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on >>>>>>>>>>>>>>>>> (VOICE) >>>>>>>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (NO >>>>>>>>>>>>>>>>> DIALTONE) >>>>>>>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (NO >>>>>>>>>>>>>>>>> DIAL >>>>>>>>>>>>>>>>> TONE) >>>>>>>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on (NO >>>>>>>>>>>>>>>>> ANSWER) >>>>>>>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: abort on >>>>>>>>>>>>>>>>> (DELAYED) >>>>>>>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: send (ATZ^M) >>>>>>>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: expect (OK) >>>>>>>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: ATZ^M^M >>>>>>>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: OK >>>>>>>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >> -- >>>>>>>>>>>>>>>>> got it >>>>>>>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: send >>>>>>>>>>>>>>>>> (ATDT#99^M) >>>>>>>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: expect >>>>>>>>>>>>>>>>> (CONNECT) >>>>>>>>>>>>>>>>> Apr 25 17:31:35 tourcom-laptop chat[6499]: ^M >>>>>>>>>>>>>>>>> Apr 25 17:31:38 tourcom-laptop chat[6499]: ATDT#99^M^M >>>>>>>>>>>>>>>>> Apr 25 17:31:38 tourcom-laptop chat[6499]: NO CARRIER >>>>>>>>>>>>>>>>> Apr 25 17:31:38 tourcom-laptop chat[6499]: >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >> -- >>>>>>>>>>>>>>>>> failed >>>>>>>>>>>>>>>>> Apr 25 17:31:38 tourcom-laptop chat[6499]: Failed (NO >>>>>>>>>>>>>>>>> CARRIER) >>>>>>>>>>>>>>>>> Apr 25 17:31:39 tourcom-laptop pppd[6494]: Exit. >>>>>>>>>>>>>>>>> Apr 25 17:35:17 tourcom-laptop pppd[6536]: pppd 2.4.4 >>>>>>>>>>>>>>>>> started >>>>>>>>>>>>>>>>> by >>>>>>>>>>>>>>>>> root, >>>>>>>>>>>>>>>>> uid >>>>>>>>>>>>>>>>> 0 >>>>>>>>>>>>>>>>> Apr 25 17:35:17 tourcom-laptop pppd[6536]: Using >>>>>>>>>>>>>>>>> interface >>>>>>>>>>>>>>>>> ppp0 >>>>>>>>>>>>>>>>> Apr 25 17:35:17 tourcom-laptop pppd[6536]: Connect: ppp0 >>>>>>>>>>>>>>>>> <--> >>>>>>>>>>>>>>>>> /dev/ttyACM0 >>>>>>>>>>>>>>>>> Apr 25 17:35:36 tourcom-laptop pppd[6536]: Serial line is >>>>>>>>>>>>>>>>> looped >>>>>>>>>>>>>>>>> back. >>>>>>>>>>>>>>>>> Apr 25 17:35:36 tourcom-laptop pppd[6536]: Connection >>>>>>>>>>>>>>>>> terminated. >>>>>>>>>>>>>>>>> Apr 25 17:35:36 tourcom-laptop pppd[6536]: Exit. >>>>>>>>>>>>>>>>> Apr 25 17:37:38 tourcom-laptop pppd[6563]: pppd 2.4.4 >>>>>>>>>>>>>>>>> started >>>>>>>>>>>>>>>>> by >>>>>>>>>>>>>>>>> root, >>>>>>>>>>>>>>>>> uid >>>>>>>>>>>>>>>>> 0 >>>>>>>>>>>>>>>>> Apr 25 17:37:38 tourcom-laptop pppd[6563]: Using >>>>>>>>>>>>>>>>> interface >>>>>>>>>>>>>>>>> ppp0 >>>>>>>>>>>>>>>>> Apr 25 17:37:38 tourcom-laptop pppd[6563]: Connect: ppp0 >>>>>>>>>>>>>>>>> <--> >>>>>>>>>>>>>>>>> /dev/ttyACM0 >>>>>>>>>>>>>>>>> Apr 25 17:37:56 tourcom-laptop pppd[6563]: Serial line is >>>>>>>>>>>>>>>>> looped >>>>>>>>>>>>>>>>> back. >>>>>>>>>>>>>>>>> Apr 25 17:37:56 tourcom-laptop pppd[6563]: Connection >>>>>>>>>>>>>>>>> terminated. >>>>>>>>>>>>>>>>> Apr 25 17:37:56 tourcom-laptop pppd[6563]: Exit. >>>>>>>>>>>>>>>>> Apr 25 17:39:19 tourcom-laptop pppd[6583]: pppd 2.4.4 >>>>>>>>>>>>>>>>> started >>>>>>>>>>>>>>>>> by >>>>>>>>>>>>>>>>> root, >>>>>>>>>>>>>>>>> uid >>>>>>>>>>>>>>>>> 0 >>>>>>>>>>>>>>>>> Apr 25 17:39:19 tourcom-laptop pppd[6583]: Using >>>>>>>>>>>>>>>>> interface >>>>>>>>>>>>>>>>> ppp0 >>>>>>>>>>>>>>>>> Apr 25 17:39:19 tourcom-laptop pppd[6583]: Connect: ppp0 >>>>>>>>>>>>>>>>> <--> >>>>>>>>>>>>>>>>> /dev/ttyACM0 >>>>>>>>>>>>>>>>> Apr 25 17:39:24 tourcom-laptop pppd[6583]: PAP >>>>>>>>>>>>>>>>> authentication >>>>>>>>>>>>>>>>> succeeded >>>>>>>>>>>>>>>>> Apr 25 17:39:24 tourcom-laptop kernel: [ >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>>>>>>>>>>>>>>> 701.755111] PPP BSD >>>>>>>>>>>>>>>>> Compression module registered >>>>>>>>>>>>>>>>> Apr 25 17:39:24 tourcom-laptop kernel: [ >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>>>>>>>>>>>>>>> 701.833370] PPP >>>>>>>>>>>>>>>>> Deflate >>>>>>>>>>>>>>>>> Compression module registered >>>>>>>>>>>>>>>>> Apr 25 17:39:39 tourcom-laptop pppd[6583]: local >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>>>>>>>>>>>>>>> IP address >>>>>>>>>>>>>>>>> 10.174.152.18 >>>>>>>>>>>>>>>>> Apr 25 17:39:39 tourcom-laptop pppd[6583]: remote IP >>>>>>>>>>>>>>>>> address >>>>>>>>>>>>>>>>> 10.1.1.1 >>>>>>>>>>>>>>>>> Apr 25 17:39:39 tourcom-laptop pppd[6583]: primary >>>>>>>>>>>>>>>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >> เธข DNS >>>>>>>>>>>>>>>>> address >>>>>>>>>>>>>>>>> 203.146.237.237 >>>>>>>>>>>>>>>>> Apr 25 17:39:39 tourcom-laptop pppd[6583]: secondary DNS >>>>>>>>>>>>>>>>> address >>>>>>>>>>>>>>>>> 202.149.24.5 >>>>>>>>>>>>>>>>> Apr 25 17:42:07 tourcom-laptop pppd[6583]: Terminating on >>>>>>>>>>>>>>>>> signal >>>>>>>>>>>>>>>>> 15 >>>>>>>>>>>>>>>>> Apr 25 17:42:07 tourcom-laptop pppd[6583]: Connect time >>>>>>>>>>>>>>>>> 2.5 >>>>>>>>>>>>>>>>> minutes. >>>>>>>>>>>>>>>>> Apr 25 17:42:07 tourcom-laptop pppd[6583]: Sent 68036 >>>>>>>>>>>>>>>>> bytes, >>>>>>>>>>>>>>>>> received >>>>>>>>>>>>>>>>> 263473 bytes. >>>>>>>>>>>>>>>>> Apr 25 17:42:07 tourcom-laptop pppd[6583]: Connection >>>>>>>>>>>>>>>>> terminated. >>>>>>>>>>>>>>>>> Apr 25 17:42:07 tourcom-laptop pppd[6583]: Exit. >>>>>>>>>>>>>>>>> Apr 25 17:42:15 tourcom-laptop kernel: [ >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>>>>>>>>>>>>>>> 873.128154] usb >>>>>>>>>>>>>>>>> 2-2: USB >>>>>>>>>>>>>>>>> disconnect, address 2 >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Here above shows that you apparently used a USB modem >>>>>>>>>>>>>>>>> with >>>>>>>>>>>>>>>>> device >>>>>>>>>>>>>>>>> /dev/ttyACM0 >>>>>>>>>>>>>>>>> that has nothing to do with the device that you >>>>>>>>>>>>>>>>> apparently >>>>>>>>>>>>>>>>> need >>>>>>>>>>>>>>>>> to >>>>>>>>>>>>>>>>> use >>>>>>>>>>>>>>>>> /dev/ttySL0 >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Apr 24 22:05:24 tourcom-laptop pppd[6415]: pppd 2.4.4 >>>>>>>>>>>>>>>>> started >>>>>>>>>>>>>>>>> by >>>>>>>>>>>>>>>>> root, >>>>>>>>>>>>>>>>> uid >>>>>>>>>>>>>>>>> 0 >>>>>>>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on >>>>>>>>>>>>>>>>> (BUSY) >>>>>>>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (NO >>>>>>>>>>>>>>>>> CARRIER) >>>>>>>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on >>>>>>>>>>>>>>>>> (VOICE) >>>>>>>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (NO >>>>>>>>>>>>>>>>> DIALTONE) >>>>>>>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (NO >>>>>>>>>>>>>>>>> DIAL >>>>>>>>>>>>>>>>> TONE) >>>>>>>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on (NO >>>>>>>>>>>>>>>>> ANSWER) >>>>>>>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: abort on >>>>>>>>>>>>>>>>> (DELAYED) >>>>>>>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: send (ATZ^M) >>>>>>>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: expect (OK) >>>>>>>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: ^M^M^MATZ^M^M >>>>>>>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: OK >>>>>>>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >> -- >>>>>>>>>>>>>>>>> got it >>>>>>>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: send >>>>>>>>>>>>>>>>> (ATDT1222^M) >>>>>>>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: expect >>>>>>>>>>>>>>>>> (CONNECT) >>>>>>>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: ^M >>>>>>>>>>>>>>>>> Apr 24 22:05:25 tourcom-laptop chat[6420]: ATDT1222^M^M >>>>>>>>>>>>>>>>> Apr 24 22:06:03 tourcom-laptop chat[6420]: NO CARRIER >>>>>>>>>>>>>>>>> Apr 24 22:06:03 tourcom-laptop chat[6420]: >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >> -- >>>>>>>>>>>>>>>>> failed >>>>>>>>>>>>>>>>> Apr 24 22:06:03 tourcom-laptop chat[6420]: Failed (NO >>>>>>>>>>>>>>>>> CARRIER) >>>>>>>>>>>>>>>>> Apr 24 22:06:04 tourcom-laptop pppd[6415]: Exit. >>>>>>>>>>>>>>>>> Apr 24 22:07:13 tourcom-laptop kernel: [ >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>>>>>>>>>>>>>>> 380.500015] ALSA >>>>>>>>>>>>>>>>> /usr/src/modules/alsa/alsa-driver-1.0.16/pci/hda/hda_intel.c:634: >>>>>>>>>>>>>>>>> hda_intel: azx_get_response timeout, switching to polling >>>>>>>>>>>>>>>>> mode: >>>>>>>>>>>>>>>>> last >>>>>>>>>>>>>>>>> cmd=0x10490000 >>>>>>>>>>>>>>>>> Apr 24 22:07:51 tourcom-laptop pppd[6443]: pppd 2.4.4 >>>>>>>>>>>>>>>>> started >>>>>>>>>>>>>>>>> by >>>>>>>>>>>>>>>>> root, >>>>>>>>>>>>>>>>> uid >>>>>>>>>>>>>>>>> 0 >>>>>>>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on >>>>>>>>>>>>>>>>> (BUSY) >>>>>>>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (NO >>>>>>>>>>>>>>>>> CARRIER) >>>>>>>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on >>>>>>>>>>>>>>>>> (VOICE) >>>>>>>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (NO >>>>>>>>>>>>>>>>> DIALTONE) >>>>>>>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (NO >>>>>>>>>>>>>>>>> DIAL >>>>>>>>>>>>>>>>> TONE) >>>>>>>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on (NO >>>>>>>>>>>>>>>>> ANSWER) >>>>>>>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: abort on >>>>>>>>>>>>>>>>> (DELAYED) >>>>>>>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: send (ATZ^M) >>>>>>>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: expect (OK) >>>>>>>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: ^M^M^MATZ^M^M >>>>>>>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: OK >>>>>>>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >> -- >>>>>>>>>>>>>>>>> got it >>>>>>>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: send >>>>>>>>>>>>>>>>> (ATDT1222^M) >>>>>>>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: expect >>>>>>>>>>>>>>>>> (CONNECT) >>>>>>>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: ^M >>>>>>>>>>>>>>>>> Apr 24 22:07:52 tourcom-laptop chat[6445]: ATDT1222^M^M >>>>>>>>>>>>>>>>> Apr 24 22:08:30 tourcom-laptop chat[6445]: NO CARRIER >>>>>>>>>>>>>>>>> Apr 24 22:08:30 tourcom-laptop chat[6445]: >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >> -- >>>>>>>>>>>>>>>>> failed >>>>>>>>>>>>>>>>> Apr 24 22:08:30 tourcom-laptop chat[6445]: Failed (NO >>>>>>>>>>>>>>>>> CARRIER) >>>>>>>>>>>>>>>>> Apr 24 22:08:31 tourcom-laptop pppd[6443]: Exit. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Here wlan0 is another interface that is not needed when >>>>>>>>>>>>>>>>> you >>>>>>>>>>>>>>>>> are >>>>>>>>>>>>>>>>> trying >>>>>>>>>>>>>>>>> to connect with dialup. >>>>>>>>>>>>>>>>> It needs to be shut off to troubleshoot the dialup >>>>>>>>>>>>>>>>> connection. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> $ sudo ifconfig wlan0 down >>>>>>>>>>>>>>>>> and all others too like eth0, eth1 etc. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Apr 20 14:45:17 tourcom-laptop kernel: [ >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>>>>>>>>>>>>>>> เธข 22.526400] wlan0: >>>>>>>>>>>>>>>>> ethernet >>>>>>>>>>>>>>>>> device 00:16:cf:73:b1:97 using serialized NDIS driver: >>>>>>>>>>>>>>>>> net5211, >>>>>>>>>>>>>>>>> version: 0x40002, NDIS version: 0x501, vendor: 'NDIS >>>>>>>>>>>>>>>>> Network >>>>>>>>>>>>>>>>> Adapter', >>>>>>>>>>>>>>>>> 168C:001A.5.conf >>>>>>>>>>>>>>>>> Apr 20 14:45:17 tourcom-laptop kernel: [ >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>>>>>>>>>>>>>>> เธข 22.543385] >>>>>>>>>>>>>>>>> acer-wmi: >>>>>>>>>>>>>>>>> Acer >>>>>>>>>>>>>>>>> Laptop ACPI-WMI Extras >>>>>>>>>>>>>>>>> Apr 20 14:45:17 tourcom-laptop kernel: [ >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>>>>>>>>>>>>>>> เธข 22.568075] wlan0: >>>>>>>>>>>>>>>>> encryption modes supported: WEP; TKIP with WPA, WPA2, >>>>>>>>>>>>>>>>> WPA2PSK; >>>>>>>>>>>>>>>>> AES/CCMP with WPA, WPA2, WPA2PSK >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> What is this ? >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Apr 20 14:45:38 tourcom-laptop kernel: [ >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>>>>>>>>>>>>>>> เธข 51.034653] >>>>>>>>>>>>>>>>> Intel537: >>>>>>>>>>>>>>>>> disagrees about version of symbol struct_module >>>>>>>>>>>>>>>>> Apr 20 14:45:38 tourcom-laptop kernel: [ >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>>>>>>>>>>>>>>> เธข 51.081436] >>>>>>>>>>>>>>>>> Intel537: >>>>>>>>>>>>>>>>> disagrees about version of symbol struct_module >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Intel537 modem?? >>>>>>>>>>>>>>>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >> too, >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >> Did not see >>>>>>>>>>>>>>>>> that one when you >>>>>>>>>>>>>>>>> sent >>>>>>>>>>>>>>>>> ModemData.txt first. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Apr 20 14:45:40 tourcom-laptop kernel: [ >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>>>>>>>>>>>>>>> เธข 53.644280] sky2 >>>>>>>>>>>>>>>>> eth0: >>>>>>>>>>>>>>>>> enabling interface >>>>>>>>>>>>>>>>> Apr 20 14:45:40 tourcom-laptop kernel: [ >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>>>>>>>>>>>>>>> เธข 53.647244] >>>>>>>>>>>>>>>>> ADDRCONF(NETDEV_UP): eth0: link is not ready >>>>>>>>>>>>>>>>> Apr 20 14:45:42 tourcom-laptop kernel: [ >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>>>>>>>>>>>>>>> เธข 55.293253] sky2 >>>>>>>>>>>>>>>>> eth0: >>>>>>>>>>>>>>>>> Link >>>>>>>>>>>>>>>>> is up at 100 Mbps, full duplex, flow control both >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Apr 20 18:23:18 tourcom-laptop kernel: [ 1837.606047] >>>>>>>>>>>>>>>>> sky2 >>>>>>>>>>>>>>>>> eth0: >>>>>>>>>>>>>>>>> Link is >>>>>>>>>>>>>>>>> down. >>>>>>>>>>>>>>>>> Apr 20 18:23:20 tourcom-laptop kernel: [ 1839.206504] >>>>>>>>>>>>>>>>> sky2 >>>>>>>>>>>>>>>>> eth0: >>>>>>>>>>>>>>>>> Link >>>>>>>>>>>>>>>>> is up at 100 Mbps, full duplex, flow control both >>>>>>>>>>>>>>>>> Apr 20 18:23:26 tourcom-laptop kernel: [ 1845.688796] >>>>>>>>>>>>>>>>> sky2 >>>>>>>>>>>>>>>>> eth0: >>>>>>>>>>>>>>>>> Link is >>>>>>>>>>>>>>>>> down. >>>>>>>>>>>>>>>>> Apr 20 18:23:52 tourcom-laptop kernel: [ 1871.418303] >>>>>>>>>>>>>>>>> sky2 >>>>>>>>>>>>>>>>> eth0: >>>>>>>>>>>>>>>>> Link >>>>>>>>>>>>>>>>> is up at 100 Mbps, full duplex, flow control both >>>>>>>>>>>>>>>>> Apr 20 18:34:19 tourcom-laptop kernel: [ 2498.381516] >>>>>>>>>>>>>>>>> device >>>>>>>>>>>>>>>>> eth0 >>>>>>>>>>>>>>>>> left >>>>>>>>>>>>>>>>> promiscuous mode >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Try one thing at a time. >>>>>>>>>>>>>>>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>> You are trying to do >>>>>>>>>>>>>>>>> too much. >>>>>>>>>>>>>>>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >> If you >>>>>>>>>>>>>>>>> want >>>>>>>>>>>>>>>>> to connect with slmodemd use that and that only. >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>>>>>>>>>>>>>>> When >>>>>>>>>>>>>>>>> attempting >>>>>>>>>>>>>>>>> to >>>>>>>>>>>>>>>>> connect, open a terminal and type >>>>>>>>>>>>>>>>> $ sudo tail -f /var/log/messages >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> send only the parts when the connection is taking place >>>>>>>>>>>>>>>>> and >>>>>>>>>>>>>>>>> when >>>>>>>>>>>>>>>>> it >>>>>>>>>>>>>>>>> fails. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Regards, >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Antonio >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> On 4/26/09, Patompong Kumdang <u500910052@xxxxxx> wrote: >>>>>>>>>>>>>>>>>> Hello, >>>>>>>>>>>>>>>>>> I heve sent this log file to you. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Thank you. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Tour. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Tour, >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Could you try to make a log file of your session >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> $ sudo wvdial 2>&1 | tee wvdial.out >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> send wvdial.out to us(list) >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >> and >>>>>>>>>>>>>>>>>>> attach output of >>>>>>>>>>>>>>>>>>> $ sudo tail -f var/log/messages >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Report back presently. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Regards, >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Antonio >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> 2009/4/25 Patompong Kumdang <u500910052@xxxxxx>: >>>>>>>>>>>>>>>>>>>> Antonio, >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> I don't know about how to choose driver to in stall, >>>>>>>>>>>>>>>>>>>> I follow the step that Marv suggest. >>>>>>>>>>>>>>>>>>>> My username and password is a free account in my >>>>>>>>>>>>>>>>>>>> country.(it's >>>>>>>>>>>>>>>>>>>> safe ) >>>>>>>>>>>>>>>>>>>> In windows I don't use a special command. >>>>>>>>>>>>>>>>>>>> Now, I guess my modem can't sent signal to server. >>>>>>>>>>>>>>>>>>>> Do you listen the file that I sent to you. >>>>>>>>>>>>>>>>>>> Yes, I get typically the same sound when I dialup too! >>>>>>>>>>>>>>>>>>>> Thank you very much :) >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Tour. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> TouR, Marv >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> I don't know if this will make a difference, but >>>>>>>>>>>>>>>>>>>>> since >>>>>>>>>>>>>>>>>>>>> your >>>>>>>>>>>>>>>>>>>>> using >>>>>>>>>>>>>>>>>>>>> precompiled SLMODEMD with ALSA support, your alsa >>>>>>>>>>>>>>>>>>>>> version >>>>>>>>>>>>>>>>>>>>> is >>>>>>>>>>>>>>>>>>>>> 1.0.19 >>>>>>>>>>>>>>>>>>>>> and there does not exist a 1.0.19 >>>>>>>>>>>>>>>>>>>>> SLMODEMD.gcc4.3_alsa1.0.19.tar.gz. >>>>>>>>>>>>>>>>>>>>> Marv will it make a difference if he needs a >>>>>>>>>>>>>>>>>>>>> gcc4.3_alsa1.0.19 >>>>>>>>>>>>>>>>>>>>> SLMODEMD? >>>>>>>>>>>>>>>>>>>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >> He >>>>>>>>>>>>>>>>>>>>> is having >>>> difficulties getting >>>>>>>>>>>>>>>>>>>>> connected to >>>>>>>>>>>>>>>>>>>>> internet. >>>>>>>>>>>>>>>>>>>>> This email sent to Marv, and Jacques not to list so >>>>>>>>>>>>>>>>>>>>> your >>>>>>>>>>>>>>>>>>>>> username >>>>>>>>>>>>>>>>>>>>> and >>>>>>>>>>>>>>>>>>>>> password will be safe! >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> TouR, >>>>>>>>>>>>>>>>>>>>> my wvdial.conf file looks this way: >>>>>>>>>>>>>>>>>>>>> [olivares@localhost ~]$ cat /etc/wvdial.conf >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> [Dialer Defaults] >>>>>>>>>>>>>>>>>>>>> Init2 = ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90 >>>>>>>>>>>>>>>>>>>>> Modem Type = Analog Modem >>>>>>>>>>>>>>>>>>>>> Phone = 7072000 >>>>>>>>>>>>>>>>>>>>> ISDN = 0 >>>>>>>>>>>>>>>>>>>>> Username = myusername >>>>>>>>>>>>>>>>>>>>> Init1 = ATZ >>>>>>>>>>>>>>>>>>>>> Password = ************ >>>>>>>>>>>>>>>>>>>>> Modem = /dev/ttySL0 >>>>>>>>>>>>>>>>>>>>> Baud = 460800 >>>>>>>>>>>>>>>>>>>>> Carrier Check = No >>>>>>>>>>>>>>>>>>>>> Stupid Mode = 1 >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> A SLMODEMD with alsa 1.0.19 might be his best bet? >>>>>>>>>>>>>>>>>>>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>>>>>>>>>>>>>>>>>>> Don't >>>>>>>>>>>>>>>>>>>>> know >>>>>>>>>>>>>>>>>>>>> if >>>>>>>>>>>>>>>>>>>>> this >>>>>>>>>>>>>>>>>>>>> makes a difference, but why not ask? >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> http://linmodems.technion.ac.il/packages/smartlink/ >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Here's your wvdial.con >>>>>>>>>>>>>>>>>>>>> this is my wvdial.conf file >>>>>>>>>>>>>>>>>>>>> ------------------------------------- >>>>>>>>>>>>>>>>>>>>> [Dialer Defaults] >>>>>>>>>>>>>>>>>>>>> Modem = /dev/ttySL0 >>>>>>>>>>>>>>>>>>>>> Init1 = ATZ >>>>>>>>>>>>>>>>>>>>> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>>>>>>>>>>>>>>>>>> ;Stupid Mode = 1 >>>>>>>>>>>>>>>>>>>>> Modem Type = Analog Modem >>>>>>>>>>>>>>>>>>>>> Phone = 1222 >>>>>>>>>>>>>>>>>>>>> ISDN = 0 >>>>>>>>>>>>>>>>>>>>> Username = U89$0y)9@xxxxxxxxxxxxx >>>>>>>>>>>>>>>>>>>>> Carrier Check = no >>>>>>>>>>>>>>>>>>>>> Password = j4**9c+p >>>>>>>>>>>>>>>>>>>>> Baud = 460800 >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Jacques, >>>>>>>>>>>>>>>>>>>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >> is a >>>>>>>>>>>>>>>>>>>>> username >>>> allow characters like >>>>>>>>>>>>>>>>>>>>> ")" in >>>>>>>>>>>>>>>>>>>>> wvdial.conf ? >>>>>>>>>>>>>>>>>>>>> U89$0y)9@xxxxxxxxxxxxx >>>>>>>>>>>>>>>>>>>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >> ? >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> I am looking for what your ISP requires, but can't >>>>>>>>>>>>>>>>>>>>> seem >>>>>>>>>>>>>>>>>>>>> to >>>>>>>>>>>>>>>>>>>>> find >>>>>>>>>>>>>>>>>>>>> anything. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> http://www.tot.co.th/toten/index.php?option=com_content&task=view&id=363&Itemid=1121 >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> TouR >>>>>>>>>>>>>>>>>>>>> Do you use any special commands or strings to connect >>>>>>>>>>>>>>>>>>>>> via >>>>>>>>>>>>>>>>>>>>> windows? >>>>>>>>>>>>>>>>>>>>> It is strange that the connection can't seem to get >>>>>>>>>>>>>>>>>>>>> through? >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> 2009/4/25 Patompong Kumdang <u500910052@xxxxxx>: >>>>>>>>>>>>>>>>>>>>>> Antonio, >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Thanks. for your help. :) >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> I try to modify wvdial.conf, But it has the same >>>>>>>>>>>>>>>>>>>>>> problem. >>>>>>>>>>>>>>>>>>>>>> I attach file that contain the sound that I hear >>>>>>>>>>>>>>>>>>>>>> when >>>>>>>>>>>>>>>>>>>>>> connect >>>>>>>>>>>>>>>>>>>>>> using ubuntu (001.wav) and using windows >>>>>>>>>>>>>>>>>>>>>> (003.wav)(windows >>>>>>>>>>>>>>>>>>>>>> can >>>>>>>>>>>>>>>>>>>>>> connect) >>>>>>>>>>>>>>>>>>>>>> I guess my modem can't sent information to server? >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> and this is my log file >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> ---------------------------------------------------------- >>>>>>>>>>>>>>>>>>>>>> Baud = 57,600 >>>>>>>>>>>>>>>>>>>>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >> , >>>>>>>>>>>>>>>>>>>>>> +MS=34 >>>>>>>>>>>>>>>>>>>>>> ---------------------------------------------------------- >>>>>>>>>>>>>>>>>>>>>> --> WvDial: Internet dialer version 1.60 >>>>>>>>>>>>>>>>>>>>>> --> Cannot get information for serial port. >>>>>>>>>>>>>>>>>>>>>> --> Initializing modem. >>>>>>>>>>>>>>>>>>>>>> --> Sending: ATZ >>>>>>>>>>>>>>>>>>>>>> ATZ >>>>>>>>>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>>>>>>>>> --> Sending: ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=34 >>>>>>>>>>>>>>>>>>>>>> ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=34 >>>>>>>>>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>>>>>>>>> --> Modem initialized. >>>>>>>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>>>>>>>>>>> --> No Carrier! >>>>>>>>>>>>>>>>>>>>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>>>>>>>>>>>>>>>>>>>> Trying >>>> again. >>>>>>>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>>>>>>>> --> Timed out while dialing. >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >> Trying again. >>>>>>>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>>>>>>>> --> No Carrier! >>>>>>>>>>>>>>>>>>>>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>>>>>>>>>>>>>>>>>>>> Trying >>>> again. >>>>>>>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>>>>>>>> --> No Carrier! >>>>>>>>>>>>>>>>>>>>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>>>>>>>>>>>>>>>>>>>> Trying >>>> again. >>>>>>>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>>>>>>>> --> No Carrier! >>>>>>>>>>>>>>>>>>>>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>>>>>>>>>>>>>>>>>>>> Trying >>>> again. >>>>>>>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> ------------------------------------------------------------------ >>>>>>>>>>>>>>>>>>>>>> Baud = 57,600 >>>>>>>>>>>>>>>>>>>>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>>>>>>>>>>>>>>>>>>>> ,+MS=90 >>>>>>>>>>>>>>>>>>>>>> ------------------------------------------------------------------ >>>>>>>>>>>>>>>>>>>>>> --> WvDial: Internet dialer version 1.60 >>>>>>>>>>>>>>>>>>>>>> --> Cannot get information for serial port. >>>>>>>>>>>>>>>>>>>>>> --> Initializing modem. >>>>>>>>>>>>>>>>>>>>>> --> Sending: ATZ >>>>>>>>>>>>>>>>>>>>>> ATZ >>>>>>>>>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>>>>>>>>> --> Sending: ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90 >>>>>>>>>>>>>>>>>>>>>> ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90 >>>>>>>>>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>>>>>>>>> --> Modem initialized. >>>>>>>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>>>>>>>>>>> --> No Carrier! >>>>>>>>>>>>>>>>>>>>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>>>>>>>>>>>>>>>>>>>> Trying >>>> again. >>>>>>>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> ------------------------------------------------ >>>>>>>>>>>>>>>>>>>>>> Baud = 115,200 >>>>>>>>>>>>>>>>>>>>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >> , >>>>>>>>>>>>>>>>>>>>>> +MS=90 >>>>>>>>>>>>>>>>>>>>>> ------------------------------------------------ >>>>>>>>>>>>>>>>>>>>>> --> WvDial: Internet dialer version 1.60 >>>>>>>>>>>>>>>>>>>>>> --> Cannot get information for serial port. >>>>>>>>>>>>>>>>>>>>>> --> Initializing modem. >>>>>>>>>>>>>>>>>>>>>> --> Sending: ATZ >>>>>>>>>>>>>>>>>>>>>> ATZ >>>>>>>>>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>>>>>>>>> --> Sending: ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90 >>>>>>>>>>>>>>>>>>>>>> ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90 >>>>>>>>>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>>>>>>>>> --> Modem initialized. >>>>>>>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>>>>>>>>>>> --> No Carrier! >>>>>>>>>>>>>>>>>>>>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>>>>>>>>>>>>>>>>>>>> Trying >>>> again. >>>>>>>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> --------------------------------------------------------- >>>>>>>>>>>>>>>>>>>>>> Baud = 115,200 , >>>>>>>>>>>>>>>>>>>>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>>>>>>>>>>>>>>>>>>>> +MS=34 >>>>>>>>>>>>>>>>>>>>>> --------------------------------------------------------- >>>>>>>>>>>>>>>>>>>>>> --> WvDial: Internet dialer version 1.60 >>>>>>>>>>>>>>>>>>>>>> --> Cannot get information for serial port. >>>>>>>>>>>>>>>>>>>>>> --> Initializing modem. >>>>>>>>>>>>>>>>>>>>>> --> Sending: ATZ >>>>>>>>>>>>>>>>>>>>>> ATZ >>>>>>>>>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>>>>>>>>> --> Sending: ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=34 >>>>>>>>>>>>>>>>>>>>>> ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=34 >>>>>>>>>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>>>>>>>>> --> Modem initialized. >>>>>>>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>>>>>>>>>>> --> No Carrier! >>>>>>>>>>>>>>>>>>>>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>>>>>>>>>>>>>>>>>>>> Trying >>>> again. >>>>>>>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> ------------------------------------------------------------------ >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Tour, >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Try to modify wvdial.conf from >>>>>>>>>>>>>>>>>>>>>>> [Dialer Defaults] >>>>>>>>>>>>>>>>>>>>>>> Modem = /dev/ttySL0 >>>>>>>>>>>>>>>>>>>>>>> Init1 = ATZ >>>>>>>>>>>>>>>>>>>>>>> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>>>>>>>>>>>>>>>>>>>> ;Stupid Mode = 1 >>>>>>>>>>>>>>>>>>>>>>> Modem Type = Analog Modem >>>>>>>>>>>>>>>>>>>>>>> Phone = 1222 >>>>>>>>>>>>>>>>>>>>>>> ISDN = 0 >>>>>>>>>>>>>>>>>>>>>>> Username = U89$0y)9@xxxxxxxxxxxxx >>>>>>>>>>>>>>>>>>>>>>> Carrier Check = no >>>>>>>>>>>>>>>>>>>>>>> Password = ********** >>>>>>>>>>>>>>>>>>>>>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>> <--- change this to >>>>>>>>>>>>>>>>>>>>>>> ***** be >>>>>>>>>>>>>>>>>>>>>>> careful >>>>>>>>>>>>>>>>>>>>>>> with >>>>>>>>>>>>>>>>>>>>>>> passwords others can take advantage when posting to >>>>>>>>>>>>>>>>>>>>>>> list >>>>>>>>>>>>>>>>>>>>>>> Baud = 460800 >>>>>>>>>>>>>>>>>>>>>>> to >>>>>>>>>>>>>>>>>>>>>>> [Dialer Defaults] >>>>>>>>>>>>>>>>>>>>>>> Modem = /dev/ttySL0 >>>>>>>>>>>>>>>>>>>>>>> Init1 = ATZ >>>>>>>>>>>>>>>>>>>>>>> Init2 = ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90 >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>>>>>>>>>>>>>>>>>>>>> เธข <--- >>>>>>>>>>>>>>>>>>>>>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>>>>>>>>>>>>>>>>>>>>> add X3 >>>>>>>>>>>>>>>>>>>>>>> option to >>>>>>>>>>>>>>>>>>>>>>> skip dialtone checking, and add +MS=90 you may try >>>>>>>>>>>>>>>>>>>>>>> +MS=34 >>>>>>>>>>>>>>>>>>>>>>> if >>>>>>>>>>>>>>>>>>>>>>> +MS=90 >>>>>>>>>>>>>>>>>>>>>>> does not help you get connected >>>>>>>>>>>>>>>>>>>>>>> Modem Type = Analog Modem >>>>>>>>>>>>>>>>>>>>>>> Phone = 1222 >>>>>>>>>>>>>>>>>>>>>>> Baud = 460800 >>>>>>>>>>>>>>>>>>>>>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>>>>>>>>>>>>>>>>>>>>> เธข <---- >>>> you can also try >>>>>>>>>>>>>>>>>>>>>>> lower bauds like >>>>>>>>>>>>>>>>>>>>>>> 115,200 or >>>>>>>>>>>>>>>>>>>>>>> 57,600 in case it is needed. >>>>>>>>>>>>>>>>>>>>>>> ISDN = 0 >>>>>>>>>>>>>>>>>>>>>>> Username = U89$0y)9@xxxxxxxxxxxxx >>>>>>>>>>>>>>>>>>>>>>> Password = ********** >>>>>>>>>>>>>>>>>>>>>>> Carrier Check = no >>>>>>>>>>>>>>>>>>>>>>> Stupid Mode = 1 >>>>>>>>>>>>>>>>>>>>>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>>>>>>>>>>>>>>>>>>>>> <--- >>>> remove the ";", it >>>>>>>>>>>>>>>>>>>>>>> might help get >>>>>>>>>>>>>>>>>>>>>>> you >>>>>>>>>>>>>>>>>>>>>>> connected >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Try that and report back. >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >> Also, if for any >>>>>>>>>>>>>>>>>>>>>>> reason you >>>>>>>>>>>>>>>>>>>>>>> do >>>>>>>>>>>>>>>>>>>>>>> not >>>>>>>>>>>>>>>>>>>>>>> get >>>>>>>>>>>>>>>>>>>>>>> connected, try reading the DOCs/wvdial.txt file. >>>>>>>>>>>>>>>>>>>>>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >> In >>>>>>>>>>>>>>>>>>>>>>> that >>>>>>>>>>>>>>>>>>>>>>> file it >>>>>>>>>>>>>>>>>>>>>>> summarizes more of what I am recommending here. >>>>>>>>>>>>>>>>>>>>>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>>>>>>>>>>>>>>>>>>>>> Also >>>>>>>>>>>>>>>>>>>>>>> try to >>>>>>>>>>>>>>>>>>>>>>> create >>>>>>>>>>>>>>>>>>>>>>> a >>>>>>>>>>>>>>>>>>>>>>> file that you may send should you fail to get >>>>>>>>>>>>>>>>>>>>>>> connected. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> ## >> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>>>>>>>>>>>>>>>>>>>>> เธข >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >> To make a logfile >>>>>>>>>>>>>>>>>>>>>>> wvdial.out >>>>>>>>>>>>>>>>>>>>>>> $ sudo wvdial 2>&1 | tee wvdial.out >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> and attach wvdial.out to list. >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >> You may >>>>>>>>>>>>>>>>>>>>>>> also read up on >>>>>>>>>>>>>>>>>>>>>>> Jacques' >>>>>>>>>>>>>>>>>>>>>>> post-install troubleshooting guide/howto : >>>>>>>>>>>>>>>>>>>>>>> http://linmodems.technion.ac.il/post-install.html >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Regards, >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Antonio >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> 2009/4/24 Patompong Kumdang <u500910052@xxxxxx>: >>>>>>>>>>>>>>>>>>>>>>>> Hello, >>>>>>>>>>>>>>>>>>>>>>>> I'm Tour, Thailand >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> I cannot connect to internet by using my internal >>>>>>>>>>>>>>>>>>>>>>>> modem. >>>>>>>>>>>>>>>>>>>>>>>> I use ubuntu 8.1 >>>>>>>>>>>>>>>>>>>>>>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>> kernel 2.6.27-10-generic >>>>>>>>>>>>>>>>>>>>>>>> when I connect, I can hear the dial tone like as >>>>>>>>>>>>>>>>>>>>>>>> connect >>>>>>>>>>>>>>>>>>>>>>>> by >>>>>>>>>>>>>>>>>>>>>>>> windows, >>>>>>>>>>>>>>>>>>>>>>>> But the sound that I hear not the same, It stop >>>>>>>>>>>>>>>>>>>>>>>> sound >>>>>>>>>>>>>>>>>>>>>>>> later. >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> (I guss you >>>>>>>>>>>>>>>>>>>>>>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>>>>>>>>>>>>>>>>>>>>>> know >>>> that I tell, my english >>>>>>>>>>>>>>>>>>>>>>>> not very >>>>>>>>>>>>>>>>>>>>>>>> well) >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> this is my wvdial.conf >>>>>>>>>>>>>>>>>>>>>>>> ------------------------------------------- >>>>>>>>>>>>>>>>>>>>>>>> root@tourcom-laptop:/home/tourcom# wvdialconf >>>>>>>>>>>>>>>>>>>>>>>> /etc/wvdial.conf >>>>>>>>>>>>>>>>>>>>>>>> Editing `/etc/wvdial.conf'. >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Scanning your serial ports for a modem. >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Modem Port Scan<*1>: S0 >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >> เธข S1 >>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>>>>>>>>>>>>>>>>>>>>>> เธข S2 >>>>>>>>>>>>>>>>>>>>>>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>>>>>>>>>>>>>>>>>>>>>> เธข S3 >>>>>>>>>>>>>>>>>>>>>>>> WvModem<*1>: Cannot get information for serial >>>>>>>>>>>>>>>>>>>>>>>> port. >>>>>>>>>>>>>>>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 -- OK >>>>>>>>>>>>>>>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 Z -- OK >>>>>>>>>>>>>>>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 -- OK >>>>>>>>>>>>>>>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK >>>>>>>>>>>>>>>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK >>>>>>>>>>>>>>>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- >>>>>>>>>>>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>>>>>>>>>>> ttySL0<*1>: Modem Identifier: ATI -- SmartLink >>>>>>>>>>>>>>>>>>>>>>>> Soft >>>>>>>>>>>>>>>>>>>>>>>> Modem >>>>>>>>>>>>>>>>>>>>>>>> ttySL0<*1>: Speed 4800: AT -- OK >>>>>>>>>>>>>>>>>>>>>>>> ttySL0<*1>: Speed 9600: AT -- OK >>>>>>>>>>>>>>>>>>>>>>>> ttySL0<*1>: Speed 19200: AT -- OK >>>>>>>>>>>>>>>>>>>>>>>> ttySL0<*1>: Speed 38400: AT -- OK >>>>>>>>>>>>>>>>>>>>>>>> ttySL0<*1>: Speed 57600: AT -- OK >>>>>>>>>>>>>>>>>>>>>>>> ttySL0<*1>: Speed 115200: AT -- OK >>>>>>>>>>>>>>>>>>>>>>>> ttySL0<*1>: Speed 230400: AT -- OK >>>>>>>>>>>>>>>>>>>>>>>> ttySL0<*1>: Speed 460800: AT -- OK >>>>>>>>>>>>>>>>>>>>>>>> ttySL0<*1>: Max speed is 460800; that should be >>>>>>>>>>>>>>>>>>>>>>>> safe. >>>>>>>>>>>>>>>>>>>>>>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- >>>>>>>>>>>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Found a modem on /dev/ttySL0. >>>>>>>>>>>>>>>>>>>>>>>> Modem configuration written to /etc/wvdial.conf. >>>>>>>>>>>>>>>>>>>>>>>> ttySL0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 >>>>>>>>>>>>>>>>>>>>>>>> &C1 >>>>>>>>>>>>>>>>>>>>>>>> &D2 >>>>>>>>>>>>>>>>>>>>>>>> +FCLASS=0" >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> this is the script when I connect >>>>>>>>>>>>>>>>>>>>>>>> ---------------------------------------------------------- >>>>>>>>>>>>>>>>>>>>>>>> Script started on Sat 25 Apr 2009 09:48:30 AM ICT >>>>>>>>>>>>>>>>>>>>>>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>> ]0;root@tourcom-laptop: /home/tourcom >>>>>>>>>>>>>>>>>>>>>>>> root@tourcom-laptop:/home/tourcom# >>>>>>>>>>>>>>>>>>>>>>>> wvdial >>>>>>>>>>>>>>>>>>>>>>>> --> WvDial: Internet dialer version 1.60 >>>>>>>>>>>>>>>>>>>>>>>> --> Cannot get information for serial port. >>>>>>>>>>>>>>>>>>>>>>>> --> Initializing modem. >>>>>>>>>>>>>>>>>>>>>>>> --> Sending: ATZ >>>>>>>>>>>>>>>>>>>>>>>> ATZ >>>>>>>>>>>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>>>>>>>>>>> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>>>>>>>>>>>>>>>>>>>>> ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>>>>>>>>>>>>>>>>>>>>> OK >>>>>>>>>>>>>>>>>>>>>>>> --> Modem initialized. >>>>>>>>>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>>>>>>>>>> NO CARRIER >>>>>>>>>>>>>>>>>>>>>>>> --> No Carrier! >>>>>>>>>>>>>>>>>>>>>>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>> Trying again. >>>>>>>>>>>>>>>>>>>>>>>> --> Sending: ATDT1222 >>>>>>>>>>>>>>>>>>>>>>>> --> Waiting for carrier. >>>>>>>>>>>>>>>>>>>>>>>> ATDT1222 >>>>>>>>>>>>>>>>>>>>>>>> ^CCaught signal 2: >>>>>>>>>>>>>>>>>>>>>>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>> Attempting to exit >>>>>>>>>>>>>>>>>>>>>>>> gracefully... >>>>>>>>>>>>>>>>>>>>>>>> --> Disconnecting at Sat Apr 25 09:49:42 2009 >>>>>>>>>>>>>>>>>>>>>>>> เน€เธ�€เน€เธ��เน€เธ��เน€เธ�เธ� >>>> ]0;root@tourcom-laptop: /home/tourcom >>>>>>>>>>>>>>>>>>>>>>>> root@tourcom-laptop:/home/tourcom# >>>>>>>>>>>>>>>>>>>>>>>> exit >>>>>>>>>>>>>>>>>>>>>>>> exit >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Script done on Sat 25 Apr 2009 09:49:45 AM ICT >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> this is my wvdial.conf file >>>>>>>>>>>>>>>>>>>>>>>> ------------------------------------- >>>>>>>>>>>>>>>>>>>>>>>> [Dialer Defaults] >>>>>>>>>>>>>>>>>>>>>>>> Modem = /dev/ttySL0 >>>>>>>>>>>>>>>>>>>>>>>> Init1 = ATZ >>>>>>>>>>>>>>>>>>>>>>>> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>>>>>>>>>>>>>>>>>>>>> ;Stupid Mode = 1 >>>>>>>>>>>>>>>>>>>>>>>> Modem Type = Analog Modem >>>>>>>>>>>>>>>>>>>>>>>> Phone = 1222 >>>>>>>>>>>>>>>>>>>>>>>> ISDN = 0 >>>>>>>>>>>>>>>>>>>>>>>> Username = U89$0y)9@xxxxxxxxxxxxx >>>>>>>>>>>>>>>>>>>>>>>> Carrier Check = no >>>>>>>>>>>>>>>>>>>>>>>> Password = j4**9c+p >>>>>>>>>>>>>>>>>>>>>>>> Baud = 460800 >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> <div><br></div> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> <div><br></div> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> <div><br></div> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>> >>>> >>>> >>> >>> >> >> >> > >
