Re: ALSA Soft Modem Support

[Aydin MUTLU <aydin.mutlu@xxxxxxxxxx>]

I retested but,
unfortunately result is same as.


Marvin Stodolsky wrote:
> Aydin,
>
> Thanks for the report
>
> Re: cd .. # change to folder slmodem-2.9.11-20070505
>
> is the minor problem.
> ALSA support can only be done within the modem/ folder, as related
> near the end of the README.  So just delte the current slmodemd
>
> Then within the modem/ folder do:
> $ make clean
> $ make SUPPORT_ALSA=1
> $ su - root
> # chown root:root slmodemd
> # cp slmodemd /usr/sbin/slmodemd
> Though may not be necessary:
> # chmod +x /usr/sbin/slmodemd
>
> and retest the dialout.  Please report back.
>
> Note that since slmodemd is NOT a driver, it needn't be recompiled
> with every change in kernel.  That is why I can provide it already
> compiled in the SLMODEMD-version.tar.gz packages.
>
> MarvS
>
>
> On 8/6/07, Aydin MUTLU <aydin.mutlu@xxxxxxxxxx> wrote:
>   
> > Hi Marvin,
> > With your helpful information, I improved my works.
> > I want to share my experience with you.
> >
> >
> > ---- Fresh Installation
> >
> > install fresh open suse linux 10.3 kernel 2.6.22.1-10
> >
> > download slmodem-2.9.11-20070505.tar.gz
> >
> > tar -zxvf slmodem-2.9.11-20070505.tar.gz
> >
> > cd slmodem-2.9.11-20070505
> >
> > cd modem
> >
> > edit modem_main.c
> >
> > { replace line382
> > old line: if ( rsize != size ) {
> > new line: if ( rsize < size ) {
> >
> > Note: Patch from
> > "http://helllabs.org/patch/20070710_slmodem/slmodem-2.9.11-alsa-period-size.patch";
> >
> > make SUPPORT_ALSA=1
> >
> > cd .. # change to folder slmodem-2.9.11-20070505
> >
> > make SUPPORT_ALSA=1
> >
> > make SUPPORT_ALSA=1 install
> >
> >
> >
> > ---- Run slmodemd
> > #slmodemd --alsa -c TURKEY hw:0,6
> >
> > SmartLink Soft Modem: version 2.9.11 Feb 15 2007 23:08:19
> > symbolic link `/dev/ttySL0' -> `/dev/pts/4' created.
> > modem `hw:0,6' created. TTY is `/dev/pts/4'
> > Use `/dev/ttySL0' as modem device, Ctrl+C for termination.
> >
> >
> > ---- Probing dialing from kinternet
> >
> > SuSE Meta pppd (smpppd-ifcfg), Version 1.59 on linux-a0o9.
> > Status is: disconnected
> > trying to connect to smpppd
> > connect to smpppd
> > Status is: disconnected
> > Status is: connecting
> > pppd[0]: Plugin passwordfd.so loaded.
> > pppd[0]: --> WvDial: Internet dialer version 1.56 (abuild@poincare)
> > pppd[0]: --> Initializing modem.
> > pppd[0]: --> Sending: ATZ
> > pppd[0]: ATZ
> > pppd[0]: OK
> > pppd[0]: --> Sending: AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> > pppd[0]: AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> > pppd[0]: OK
> > pppd[0]: --> Sending: ATM1
> > pppd[0]: ATM1
> > pppd[0]: OK
> > pppd[0]: --> Sending: ATX3
> > pppd[0]: ATX3
> > pppd[0]: OK
> > pppd[0]: --> Modem initialized.
> > pppd[0]: --> Sending: ATDT277
> > pppd[0]: --> Waiting for carrier.
> > pppd[0]: ATDT277
> >
> >
> > --- Hang-up and then Dial-in
> >
> > Status is: disconnecting
> > pppd[0]: Caught signal 15: Attempting to exit gracefully...
> > pppd[0]: Connect script failed
> > Status is: disconnected
> > pppd[0] died: Connect script failed (exit code 8)
> > Auto reconnect in 15 seconds.
> > Auto reconnecting.
> > Status is: connecting
> > pppd[0]: Plugin passwordfd.so loaded.
> > pppd[0]: --> WvDial: Internet dialer version 1.56 (abuild@poincare)
> > pppd[0]: --> Initializing modem.
> > pppd[0]: --> Sending: ATZ
> > pppd[0]: --> Sending: ATQ0
> > pppd[0]: --> Re-Sending: ATZ
> > pppd[0]: --> Modem not responding.
> > pppd[0]: Connect script failed
> > Status is: disconnected
> > pppd[0] died: Connect script failed (exit code 8)
> > Auto reconnect in 15 seconds.
> >
> > -----Result
> > As a result now slmodemd works with no longer period errors.
> > But at first attempt for Dial-in, "kinternet" imitate dialing but not
> > dial physically. I can't hear my local 277 phone ring.
> >
> > When hang-up and then Dial-in again kinternet said that "Modem Not
> > responding"
> > I am waiting for comments.What can be the problem ?
> > Thank's -> Te�ekkürler.
> >
> > Note: I attached screenshots too.
> >
> >
> > Aydın.
> >
> >
> >
> >
> > Marvin Stodolsky wrote:
> >     
> > > Aydin,
> > >
> > >
> > > error: period size 48 is not supported by playback (64).
> > > is sadly the known slmodemd problem for which we are awaiting a fix
> > > from  maintainer Sasha
> > >
> > > MarvS
> > >
> > > On 8/4/07, Ayd�±n MUTLU <aydin.mutlu@xxxxxxxxxxxxxxxxxxx> wrote:
> > >
> > >       
> > > > Marvin hi again.
> > > > I applied one by one all your advice, but unfortunately not succeed.
> > > > I download and untar  SLMODEMD.gcc4.1.tar.gz from linmodems site.
> > > > then ran it.
> > > >
> > > > #/root/tools/SLMODEMD.gcc4.1/slmodemd --alsa -c TURKEY hw:0,6
> > > > SmartLink Soft Modem: version 2.9.11 Feb 15 2007 23:08:19
> > > > symbolic link `/dev/ttySL0' -> `/dev/pts/4' created.
> > > > modem `hw:0,6' created. TTY is `/dev/pts/4'
> > > > Use `/dev/ttySL0' as modem device, Ctrl+C for termination.
> > > >
> > > > After tryed "kinternet" got the fallowing errors.
> > > >
> > > > error: period size 48 is not supported by playback (64).
> > > > error: period size 48 is not supported by playback (64).
> > > > error: period size 48 is not supported by playback (64).
> > > > error: period size 48 is not supported by playback (64).
> > > > error: period size 48 is not supported by playback (64).
> > > > error: period size 48 is not supported by playback (64).
> > > >
> > > > ---------------------------------------------------------
> > > > to prevent any miss configurations I installed an compiled Linux again but
> > > > resul is same as.
> > > > -----------------------------------------------------------
> > > >
> > > >
> > > > After that applied your newly updated scanModem script and atteched your
> > > > requested files.(aydin.txt and ModemData.txt)
> > > >
> > > > Thanks
> > > >
> > > >
> > > >
> > > >         
> > > > > Jacques,
> > > > >    Update attached
> > > > >
> > > > > Aydin
> > > > >
> > > > > Please use the update too.  The output should now include a section like:
> > > > > --------
> > > > >  Download from http://linmodems.technion.ac.il/packages/smartlink/
> > > > >  the package SLMODEMD.gcc4.1.tar.gz having a compiled slmodemd. Unpack
> > > > > under Linux with:
> > > > >         $ tar zxf SLMODEMD.gcc4.1.tar.gz
> > > > >  and read instructions therein. But briefly, the modem is setup with
> > > > > command:
> > > > >         sudo slmodemd -c TURKEY  --alsa hw:0,1
> > > > >  reporting dynamic creation of ports:
> > > > >         /dev/ttySL0 --> /dev/pts/N   , with N some number
> > > > >  Read Smartlink.txt and Modem/YourSystem.txt for follow through guidance.
> > > > > --------
> > > > > though some version numbers will be different on your System.
> > > > >
> > > > > If you don't get such an extended output please run:
> > > > > # bash -x ./scanModem 2>&1 | tee aydin.txt
> > > > > gzip and send me the aydin.txt.gz
> > > > > Send me the new ModemData.txt too
> > > > >
> > > > > For your
> > > > >  PCI slot       PCI ID          SubsystemID     Name
> > > > >  ----------     ---------       ---------       --------------
> > > > >  00:14.2        1002:4383       103c:30c2       Audio device: ATI
> > > > > Technologies Inc SB600 Azalia
> > > > >
> > > > > with /proc/asound/card0/codec#1 file
> > > > > Codec: Generic 11c1 Si3054
> > > > > Address: 1
> > > > > Vendor Id: 0x11c11040
> > > > >
> > > > > the possibility of service should be explored.
> > > > > Our LSI Inc contacts related that 0x11c11040 was there own
> > > > > implmentation and NOT a Si3054 derivative.  But sometimes companies
> > > > > will buy rights to use a design like 0x11c11040 and fabricate the chip
> > > > > themselves,  If the 103c:30c2 thus had the 0x11c11040 features
> > > > > fabricated onto a Si3054 base, there is some possibility that it might
> > > > > be serviced under Linux, as snd-hda-intel does have a generic Si3054
> > > > > support.
> > > > >
> > > > > So per the documentation in the SLMODEMD.gcc4.1.tar.gz package,
> > > > > run through the tests and copy ouyput information to the List ( not just
> > > > > me)
> > > > >
> > > > > MarvS
> > > > >
> > > > > On 8/3/07, Aydin MUTLU <aydin.mutlu@xxxxxxxxxx> wrote:
> > > > >
> > > > >           
> > > > > > Hi Marvin.
> > > > > > Thanks for your quick reply;
> > > > > > I attached needed files that you have been requested.
> > > > > >
> > > > > > Marvin Stodolsky wrote:
> > > > > >
> > > > > >             
> > > > > > > Aydin
> > > > > > >
> > > > > > > Re: 0x11c11040 Si3054
> > > > > > > Si3054 is a sort of generic base chip made by Silicon Instruments
> > > > > > > which is then specailized to the requirements of several other modem
> > > > > > > chip manufacturers including LSi/ (formerly AgereSystems) with Vendor
> > > > > > > ID 11c1.
> > > > > > > Unfortunately LSI has not provide Linux support for the 0x11c11040
> > > > > > >
> > > > > > >               
> > > > > > chip
> > > > > >
> > > > > >             
> > > > > > > though we have achieved functionality of two other 11c1???? chips
> > > > > > > through the combination of the ALSA snd-hda-intel driver and the
> > > > > > > Smartlink slmodemd helper.
> > > > > > >
> > > > > > > This is no prospect for 0x11c11040  support in the short term.
> > > > > > > Likely you will need other modem hardware for Linux work.
> > > > > > > The more expensive Controller chipset modems are the least fuss in the
> > > > > > >
> > > > > > >               
> > > > > > long run.
> > > > > >
> > > > > >             
> > > > > > > Would you please:
> > > > > > > $ cp -a  /proc/asound  aydin
> > > > > > > $ tar  cfz aydin.tgz  aydin/
> > > > > > > and send me the aydin.tgz,
> > > > > > > This will help me setup proper scanModem responses to "0x11c11040
> > > > > > >
> > > > > > >               
> > > > > > Si3054"
> > > > > >
> > > > > >             
> > > > > > > This particular combination has not been encountered before.
> > > > > > > Please also send along the ModemData.txt output from scanModem.
> > > > > > >
> > > > > > > Incidentally
> > > > > > > Seksan a seksan iki, ben biologie bolumo baskan, Bogaszici U  de.
> > > > > > >
> > > > > > > MarvS
> > > > > > >
> > > > > > > On 8/2/07, Ayd��&#65533;���±n MUTLU <aydin.mutlu@xxxxxxxxxxxxxxxxxxx>
> > > > > > >
> > > > > > >               
> > > > wrote:
> > > >
> > > >         
> > > > > > > > Hi Marvin,
> > > > > > > > I am trying to install OpenSuse10.2 on Compaq 6715b notebook but I
> > > > > > > > couldn't properly setup the modem,  "ALSA soft modem 0x11c11040
> > > > > > > >
> > > > > > > >                 
> > > > > > Si3054".
> > > > > >
> > > > > >             
> > > > > > > > I have been searching on the net for days but I couldn't reach any
> > > > > > > >
> > > > > > > >                 
> > > > > > useful
> > > > > >
> > > > > >             
> > > > > > > > information. Finally I saw your explanations about this modem that
> > > > > > > >
> > > > > > > >                 
> > > > > > it is
> > > > > >
> > > > > >             
> > > > > > > > not recognized by Linux.
> > > > > > > >
> > > > > > > > Do you have any new information or suggestion about the ALSA Si3054
> > > > > > > > modem's drivers.
> > > > > > > >
> > > > > > > > thank's.
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > --
> > > > > > > > Ayd��&#65533;���±n MUTLU
> > > > > > > > Izmir University Of Economics
> > > > > > > > System Administrator.
> > > > > > > >
> > > > > > > > Sakarya Cad No:156
> > > > > > > > 35330 Bal��&#65533;���§ova-��&#65533;���°ZMR
> > > > > > > > 0232 488 81 81
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >                 
> > > > > > --
> > > > > > Ayd���±n MUTLU
> > > > > > B���°M Sistem Y���¶neticisi
> > > > > > aydin.mutlu@xxxxxxxxxx
> > > > > >
> > > > > > ���°zmir Ekonomi ��&#65533;niversitesi
> > > > > > Sakarya Cad. No: 156
> > > > > > Bal���§ova - ���°ZM���°R
> > > > > > 0232 488 81 81
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >             
> > > > --
> > > > Ayd�±n MUTLU
> > > > Izmir University Of Economics
> > > > System Administrator.
> > > >
> > > > Sakarya Cad No:156
> > > > 35330 Bal�§ova-�°ZMR
> > > > 0232 488 81 81
> > > >
> > > >
> > > >         
> > --
> > Aydın MUTLU
> > BİM Sistem Yöneticisi
> > aydin.mutlu@xxxxxxxxxx
> >
> > İzmir Ekonomi �niversitesi
> > Sakarya Cad. No: 156
> > Balçova - İZMİR
> > 0232 488 81 81
> >
> >
> >
> >     


--
Aydın MUTLU
BİM Sistem Yöneticisi
aydin.mutlu@xxxxxxxxxx

İzmir Ekonomi Üniversitesi
Sakarya Cad. No: 156
Balçova - İZMİR
0232 488 81 81