Aydin, error: period size 48 is not supported by playback (64).is sadly the known slmodemd problem for which we are awaiting a fixfrom maintainer Sasha MarvS On 8/4/07, Aydın MUTLU <aydin.mutlu@xxxxxxxxxxxxxxxxxxx> wrote:> Marvin hi again.> I applied one by one all your advice, but unfortunately not succeed.> I download and untar SLMODEMD.gcc4.1.tar.gz from linmodems site.> then ran it.>> #/root/tools/SLMODEMD.gcc4.1/slmodemd --alsa -c TURKEY hw:0,6> SmartLink Soft Modem: version 2.9.11 Feb 15 2007 23:08:19> symbolic link `/dev/ttySL0' -> `/dev/pts/4' created.> modem `hw:0,6' created. TTY is `/dev/pts/4'> Use `/dev/ttySL0' as modem device, Ctrl+C for termination.>> After tryed "kinternet" got the fallowing errors.>> error: period size 48 is not supported by playback (64).> error: period size 48 is not supported by playback (64).> error: period size 48 is not supported by playback (64).> error: period size 48 is not supported by playback (64).> error: period size 48 is not supported by playback (64).> error: period size 48 is not supported by playback (64).>> ---------------------------------------------------------> to prevent any miss configurations I installed an compiled Linux again but> resul is same as.> ----------------------------------------------------------->>> After that applied your newly updated scanModem script and atteched your> requested files.(aydin.txt and ModemData.txt)>> Thanks>>> > Jacques,> > Update attached> >> > Aydin> >> > Please use the update too. The output should now include a section like:> > --------> > Download from http://linmodems.technion.ac.il/packages/smartlink/> > the package SLMODEMD.gcc4.1.tar.gz having a compiled slmodemd. Unpack> > under Linux with:> > $ tar zxf SLMODEMD.gcc4.1.tar.gz> > and read instructions therein. But briefly, the modem is setup with> > command:> > sudo slmodemd -c TURKEY --alsa hw:0,1> > reporting dynamic creation of ports:> > /dev/ttySL0 --> /dev/pts/N , with N some number> > Read Smartlink.txt and Modem/YourSystem.txt for follow through guidance.> > --------> > though some version numbers will be different on your System.> >> > If you don't get such an extended output please run:> > # bash -x ./scanModem 2>&1 | tee aydin.txt> > gzip and send me the aydin.txt.gz> > Send me the new ModemData.txt too> >> > For your> > PCI slot PCI ID SubsystemID Name> > ---------- --------- --------- --------------> > 00:14.2 1002:4383 103c:30c2 Audio device: ATI> > Technologies Inc SB600 Azalia> >> > with /proc/asound/card0/codec#1 file> > Codec: Generic 11c1 Si3054> > Address: 1> > Vendor Id: 0x11c11040> >> > the possibility of service should be explored.> > Our LSI Inc contacts related that 0x11c11040 was there own> > implmentation and NOT a Si3054 derivative. But sometimes companies> > will buy rights to use a design like 0x11c11040 and fabricate the chip> > themselves, If the 103c:30c2 thus had the 0x11c11040 features> > fabricated onto a Si3054 base, there is some possibility that it might> > be serviced under Linux, as snd-hda-intel does have a generic Si3054> > support.> >> > So per the documentation in the SLMODEMD.gcc4.1.tar.gz package,> > run through the tests and copy ouyput information to the List ( not just> > me)> >> > MarvS> >> > On 8/3/07, Aydin MUTLU <aydin.mutlu@xxxxxxxxxx> wrote:> >> Hi Marvin.> >> Thanks for your quick reply;> >> I attached needed files that you have been requested.> >>> >> Marvin Stodolsky wrote:> >> > Aydin> >> >> >> > Re: 0x11c11040 Si3054> >> > Si3054 is a sort of generic base chip made by Silicon Instruments> >> > which is then specailized to the requirements of several other modem> >> > chip manufacturers including LSi/ (formerly AgereSystems) with Vendor> >> > ID 11c1.> >> > Unfortunately LSI has not provide Linux support for the 0x11c11040> >> chip> >> > though we have achieved functionality of two other 11c1???? chips> >> > through the combination of the ALSA snd-hda-intel driver and the> >> > Smartlink slmodemd helper.> >> >> >> > This is no prospect for 0x11c11040 support in the short term.> >> > Likely you will need other modem hardware for Linux work.> >> > The more expensive Controller chipset modems are the least fuss in the> >> long run.> >> >> >> > Would you please:> >> > $ cp -a /proc/asound aydin> >> > $ tar cfz aydin.tgz aydin/> >> > and send me the aydin.tgz,> >> > This will help me setup proper scanModem responses to "0x11c11040> >> Si3054"> >> > This particular combination has not been encountered before.> >> > Please also send along the ModemData.txt output from scanModem.> >> >> >> > Incidentally> >> > Seksan a seksan iki, ben biologie bolumo baskan, Bogaszici U de.> >> >> >> > MarvS> >> >> >> > On 8/2/07, AydÃ�±n MUTLU <aydin.mutlu@xxxxxxxxxxxxxxxxxxx>> wrote:> >> >> >> >> Hi Marvin,> >> >> I am trying to install OpenSuse10.2 on Compaq 6715b notebook but I> >> >> couldn't properly setup the modem, "ALSA soft modem 0x11c11040> >> Si3054".> >> >>> >> >> I have been searching on the net for days but I couldn't reach any> >> useful> >> >> information. Finally I saw your explanations about this modem that> >> it is> >> >> not recognized by Linux.> >> >>> >> >> Do you have any new information or suggestion about the ALSA Si3054> >> >> modem's drivers.> >> >>> >> >> thank's.> >> >>> >> >>> >> >>> >> >> --> >> >> AydÃ�±n MUTLU> >> >> Izmir University Of Economics> >> >> System Administrator.> >> >>> >> >> Sakarya Cad No:156> >> >> 35330 BalÃ�§ova-Ã�°ZMR> >> >> 0232 488 81 81> >> >>> >> >>> >> >>> >>> >>> >> --> >> Aydın MUTLU> >> BÄ°M Sistem Yöneticisi> >> aydin.mutlu@xxxxxxxxxx> >>> >> Ä°zmir Ekonomi Ã�niversitesi> >> Sakarya Cad. No: 156> >> Balçova - Ä°ZMÄ°R> >> 0232 488 81 81> >>> >>> >>> >>>> --> Aydın MUTLU> Izmir University Of Economics> System Administrator.>> Sakarya Cad No:156> 35330 Balçova-İZMR> 0232 488 81 81>
