Aydin,
Thanks for the report
Re: cd .. # change to folder slmodem-2.9.11-20070505
is the minor problem.ALSA support can only be done within the modem/ folder, as relatednear the end of the README. So just delte the current slmodemd
Then within the modem/ folder do:$ make clean$ make SUPPORT_ALSA=1$ su - root# chown root:root slmodemd# cp slmodemd /usr/sbin/slmodemdThough may not be necessary:# chmod +x /usr/sbin/slmodemd
and retest the dialout. Please report back.
Note that since slmodemd is NOT a driver, it needn't be recompiledwith every change in kernel. That is why I can provide it alreadycompiled in the SLMODEMD-version.tar.gz packages.
MarvS
On 8/6/07, Aydin MUTLU <aydin.mutlu@xxxxxxxxxx> wrote:> Hi Marvin,> With your helpful information, I improved my works.> I want to share my experience with you.>>> ---- Fresh Installation>> install fresh open suse linux 10.3 kernel 2.6.22.1-10>> download slmodem-2.9.11-20070505.tar.gz>> tar -zxvf slmodem-2.9.11-20070505.tar.gz>> cd slmodem-2.9.11-20070505>> cd modem>> edit modem_main.c>> { replace line382> old line: if ( rsize != size ) {> new line: if ( rsize < size ) {>> Note: Patch from> "http://helllabs.org/patch/20070710_slmodem/slmodem-2.9.11-alsa-period-size.patch";>> make SUPPORT_ALSA=1>> cd .. # change to folder slmodem-2.9.11-20070505>> make SUPPORT_ALSA=1>> make SUPPORT_ALSA=1 install>>>> ---- Run slmodemd> #slmodemd --alsa -c TURKEY hw:0,6>> SmartLink Soft Modem: version 2.9.11 Feb 15 2007 23:08:19> symbolic link `/dev/ttySL0' -> `/dev/pts/4' created.> modem `hw:0,6' created. TTY is `/dev/pts/4'> Use `/dev/ttySL0' as modem device, Ctrl+C for termination.>>> ---- Probing dialing from kinternet>> SuSE Meta pppd (smpppd-ifcfg), Version 1.59 on linux-a0o9.> Status is: disconnected> trying to connect to smpppd> connect to smpppd> Status is: disconnected> Status is: connecting> pppd[0]: Plugin passwordfd.so loaded.> pppd[0]: --> WvDial: Internet dialer version 1.56 (abuild@poincare)> pppd[0]: --> Initializing modem.> pppd[0]: --> Sending: ATZ> pppd[0]: ATZ> pppd[0]: OK> pppd[0]: --> Sending: AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0> pppd[0]: AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0> pppd[0]: OK> pppd[0]: --> Sending: ATM1> pppd[0]: ATM1> pppd[0]: OK> pppd[0]: --> Sending: ATX3> pppd[0]: ATX3> pppd[0]: OK> pppd[0]: --> Modem initialized.> pppd[0]: --> Sending: ATDT277> pppd[0]: --> Waiting for carrier.> pppd[0]: ATDT277>>> --- Hang-up and then Dial-in>> Status is: disconnecting> pppd[0]: Caught signal 15: Attempting to exit gracefully...> pppd[0]: Connect script failed> Status is: disconnected> pppd[0] died: Connect script failed (exit code 8)> Auto reconnect in 15 seconds.> Auto reconnecting.> Status is: connecting> pppd[0]: Plugin passwordfd.so loaded.> pppd[0]: --> WvDial: Internet dialer version 1.56 (abuild@poincare)> pppd[0]: --> Initializing modem.> pppd[0]: --> Sending: ATZ> pppd[0]: --> Sending: ATQ0> pppd[0]: --> Re-Sending: ATZ> pppd[0]: --> Modem not responding.> pppd[0]: Connect script failed> Status is: disconnected> pppd[0] died: Connect script failed (exit code 8)> Auto reconnect in 15 seconds.>> -----Result> As a result now slmodemd works with no longer period errors.> But at first attempt for Dial-in, "kinternet" imitate dialing but not> dial physically. I can't hear my local 277 phone ring.>> When hang-up and then Dial-in again kinternet said that "Modem Not> responding"> I am waiting for comments.What can be the problem ?> Thank's -> Teşekkürler.>> Note: I attached screenshots too.>>> Aydın.>>>>> Marvin Stodolsky wrote:> > Aydin,> >> >> > error: period size 48 is not supported by playback (64).> > is sadly the known slmodemd problem for which we are awaiting a fix> > from maintainer Sasha> >> > MarvS> >> > On 8/4/07, Aydın MUTLU <aydin.mutlu@xxxxxxxxxxxxxxxxxxx> wrote:> >> >> Marvin hi again.> >> I applied one by one all your advice, but unfortunately not succeed.> >> I download and untar SLMODEMD.gcc4.1.tar.gz from linmodems site.> >> then ran it.> >>> >> #/root/tools/SLMODEMD.gcc4.1/slmodemd --alsa -c TURKEY hw:0,6> >> SmartLink Soft Modem: version 2.9.11 Feb 15 2007 23:08:19> >> symbolic link `/dev/ttySL0' -> `/dev/pts/4' created.> >> modem `hw:0,6' created. TTY is `/dev/pts/4'> >> Use `/dev/ttySL0' as modem device, Ctrl+C for termination.> >>> >> After tryed "kinternet" got the fallowing errors.> >>> >> error: period size 48 is not supported by playback (64).> >> error: period size 48 is not supported by playback (64).> >> error: period size 48 is not supported by playback (64).> >> error: period size 48 is not supported by playback (64).> >> error: period size 48 is not supported by playback (64).> >> error: period size 48 is not supported by playback (64).> >>> >> ---------------------------------------------------------> >> to prevent any miss configurations I installed an compiled Linux again but> >> resul is same as.> >> -----------------------------------------------------------> >>> >>> >> After that applied your newly updated scanModem script and atteched your> >> requested files.(aydin.txt and ModemData.txt)> >>> >> Thanks> >>> >>> >>> >>> Jacques,> >>> Update attached> >>>> >>> Aydin> >>>> >>> Please use the update too. The output should now include a section like:> >>> --------> >>> Download from http://linmodems.technion.ac.il/packages/smartlink/> >>> the package SLMODEMD.gcc4.1.tar.gz having a compiled slmodemd. Unpack> >>> under Linux with:> >>> $ tar zxf SLMODEMD.gcc4.1.tar.gz> >>> and read instructions therein. But briefly, the modem is setup with> >>> command:> >>> sudo slmodemd -c TURKEY --alsa hw:0,1> >>> reporting dynamic creation of ports:> >>> /dev/ttySL0 --> /dev/pts/N , with N some number> >>> Read Smartlink.txt and Modem/YourSystem.txt for follow through guidance.> >>> --------> >>> though some version numbers will be different on your System.> >>>> >>> If you don't get such an extended output please run:> >>> # bash -x ./scanModem 2>&1 | tee aydin.txt> >>> gzip and send me the aydin.txt.gz> >>> Send me the new ModemData.txt too> >>>> >>> For your> >>> PCI slot PCI ID SubsystemID Name> >>> ---------- --------- --------- --------------> >>> 00:14.2 1002:4383 103c:30c2 Audio device: ATI> >>> Technologies Inc SB600 Azalia> >>>> >>> with /proc/asound/card0/codec#1 file> >>> Codec: Generic 11c1 Si3054> >>> Address: 1> >>> Vendor Id: 0x11c11040> >>>> >>> the possibility of service should be explored.> >>> Our LSI Inc contacts related that 0x11c11040 was there own> >>> implmentation and NOT a Si3054 derivative. But sometimes companies> >>> will buy rights to use a design like 0x11c11040 and fabricate the chip> >>> themselves, If the 103c:30c2 thus had the 0x11c11040 features> >>> fabricated onto a Si3054 base, there is some possibility that it might> >>> be serviced under Linux, as snd-hda-intel does have a generic Si3054> >>> support.> >>>> >>> So per the documentation in the SLMODEMD.gcc4.1.tar.gz package,> >>> run through the tests and copy ouyput information to the List ( not just> >>> me)> >>>> >>> MarvS> >>>> >>> On 8/3/07, Aydin MUTLU <aydin.mutlu@xxxxxxxxxx> wrote:> >>>> >>>> Hi Marvin.> >>>> Thanks for your quick reply;> >>>> I attached needed files that you have been requested.> >>>>> >>>> Marvin Stodolsky wrote:> >>>>> >>>>> Aydin> >>>>>> >>>>> Re: 0x11c11040 Si3054> >>>>> Si3054 is a sort of generic base chip made by Silicon Instruments> >>>>> which is then specailized to the requirements of several other modem> >>>>> chip manufacturers including LSi/ (formerly AgereSystems) with Vendor> >>>>> ID 11c1.> >>>>> Unfortunately LSI has not provide Linux support for the 0x11c11040> >>>>>> >>>> chip> >>>>> >>>>> though we have achieved functionality of two other 11c1???? chips> >>>>> through the combination of the ALSA snd-hda-intel driver and the> >>>>> Smartlink slmodemd helper.> >>>>>> >>>>> This is no prospect for 0x11c11040 support in the short term.> >>>>> Likely you will need other modem hardware for Linux work.> >>>>> The more expensive Controller chipset modems are the least fuss in the> >>>>>> >>>> long run.> >>>>> >>>>> Would you please:> >>>>> $ cp -a /proc/asound aydin> >>>>> $ tar cfz aydin.tgz aydin/> >>>>> and send me the aydin.tgz,> >>>>> This will help me setup proper scanModem responses to "0x11c11040> >>>>>> >>>> Si3054"> >>>>> >>>>> This particular combination has not been encountered before.> >>>>> Please also send along the ModemData.txt output from scanModem.> >>>>>> >>>>> Incidentally> >>>>> Seksan a seksan iki, ben biologie bolumo baskan, Bogaszici U de.> >>>>>> >>>>> MarvS> >>>>>> >>>>> On 8/2/07, AydÃ��Ã�±n MUTLU <aydin.mutlu@xxxxxxxxxxxxxxxxxxx>> >>>>>> >> wrote:> >>> >>>>>> Hi Marvin,> >>>>>> I am trying to install OpenSuse10.2 on Compaq 6715b notebook but I> >>>>>> couldn't properly setup the modem, "ALSA soft modem 0x11c11040> >>>>>>> >>>> Si3054".> >>>>> >>>>>> I have been searching on the net for days but I couldn't reach any> >>>>>>> >>>> useful> >>>>> >>>>>> information. Finally I saw your explanations about this modem that> >>>>>>> >>>> it is> >>>>> >>>>>> not recognized by Linux.> >>>>>>> >>>>>> Do you have any new information or suggestion about the ALSA Si3054> >>>>>> modem's drivers.> >>>>>>> >>>>>> thank's.> >>>>>>> >>>>>>> >>>>>>> >>>>>> --> >>>>>> AydÃ��Ã�±n MUTLU> >>>>>> Izmir University Of Economics> >>>>>> System Administrator.> >>>>>>> >>>>>> Sakarya Cad No:156> >>>>>> 35330 BalÃ��Ã�§ova-Ã��Ã�°ZMR> >>>>>> 0232 488 81 81> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>> --> >>>> AydÃ�±n MUTLU> >>>> BÃ�°M Sistem YÃ�¶neticisi> >>>> aydin.mutlu@xxxxxxxxxx> >>>>> >>>> Ã�°zmir Ekonomi Ã��niversitesi> >>>> Sakarya Cad. No: 156> >>>> BalÃ�§ova - Ã�°ZMÃ�°R> >>>> 0232 488 81 81> >>>>> >>>>> >>>>> >>>>> >> --> >> Aydın MUTLU> >> Izmir University Of Economics> >> System Administrator.> >>> >> Sakarya Cad No:156> >> 35330 Balçova-Ä°ZMR> >> 0232 488 81 81> >>> >>>>> --> Aydın MUTLU> BİM Sistem Yöneticisi> aydin.mutlu@xxxxxxxxxx>> İzmir Ekonomi Üniversitesi> Sakarya Cad. No: 156> Balçova - İZMİR> 0232 488 81 81>>>
