Aydin,
Please gzip your patched slmodemd and send it to me.
The residual failure may only reflect that your AgereSystems/LSI0x11c11040 chip is still not supported under Linux.
Others with HDA card hosted softmodems should retest with thepatched slmodemd.
MarvS
On 8/6/07, Aydin MUTLU <aydin.mutlu@xxxxxxxxxx> wrote:> I retested but,> unfortunately result is same as.>>> Marvin Stodolsky wrote:> > Aydin,> >> > Thanks for the report> >> > Re: cd .. # change to folder slmodem-2.9.11-20070505> >> > is the minor problem.> > ALSA support can only be done within the modem/ folder, as related> > near the end of the README. So just delte the current slmodemd> >> > Then within the modem/ folder do:> > $ make clean> > $ make SUPPORT_ALSA=1> > $ su - root> > # chown root:root slmodemd> > # cp slmodemd /usr/sbin/slmodemd> > Though may not be necessary:> > # chmod +x /usr/sbin/slmodemd> >> > and retest the dialout. Please report back.> >> > Note that since slmodemd is NOT a driver, it needn't be recompiled> > with every change in kernel. That is why I can provide it already> > compiled in the SLMODEMD-version.tar.gz packages.> >> > MarvS> >> >> > On 8/6/07, Aydin MUTLU <aydin.mutlu@xxxxxxxxxx> wrote:> >> >> Hi Marvin,> >> With your helpful information, I improved my works.> >> I want to share my experience with you.> >>> >>> >> ---- Fresh Installation> >>> >> install fresh open suse linux 10.3 kernel 2.6.22.1-10> >>> >> download slmodem-2.9.11-20070505.tar.gz> >>> >> tar -zxvf slmodem-2.9.11-20070505.tar.gz> >>> >> cd slmodem-2.9.11-20070505> >>> >> cd modem> >>> >> edit modem_main.c> >>> >> { replace line382> >> old line: if ( rsize != size ) {> >> new line: if ( rsize < size ) {> >>> >> Note: Patch from> >> "http://helllabs.org/patch/20070710_slmodem/slmodem-2.9.11-alsa-period-size.patch";> >>> >> make SUPPORT_ALSA=1> >>> >> cd .. # change to folder slmodem-2.9.11-20070505> >>> >> make SUPPORT_ALSA=1> >>> >> make SUPPORT_ALSA=1 install> >>> >>> >>> >> ---- Run slmodemd> >> #slmodemd --alsa -c TURKEY hw:0,6> >>> >> SmartLink Soft Modem: version 2.9.11 Feb 15 2007 23:08:19> >> symbolic link `/dev/ttySL0' -> `/dev/pts/4' created.> >> modem `hw:0,6' created. TTY is `/dev/pts/4'> >> Use `/dev/ttySL0' as modem device, Ctrl+C for termination.> >>> >>> >> ---- Probing dialing from kinternet> >>> >> SuSE Meta pppd (smpppd-ifcfg), Version 1.59 on linux-a0o9.> >> Status is: disconnected> >> trying to connect to smpppd> >> connect to smpppd> >> Status is: disconnected> >> Status is: connecting> >> pppd[0]: Plugin passwordfd.so loaded.> >> pppd[0]: --> WvDial: Internet dialer version 1.56 (abuild@poincare)> >> pppd[0]: --> Initializing modem.> >> pppd[0]: --> Sending: ATZ> >> pppd[0]: ATZ> >> pppd[0]: OK> >> pppd[0]: --> Sending: AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0> >> pppd[0]: AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0> >> pppd[0]: OK> >> pppd[0]: --> Sending: ATM1> >> pppd[0]: ATM1> >> pppd[0]: OK> >> pppd[0]: --> Sending: ATX3> >> pppd[0]: ATX3> >> pppd[0]: OK> >> pppd[0]: --> Modem initialized.> >> pppd[0]: --> Sending: ATDT277> >> pppd[0]: --> Waiting for carrier.> >> pppd[0]: ATDT277> >>> >>> >> --- Hang-up and then Dial-in> >>> >> Status is: disconnecting> >> pppd[0]: Caught signal 15: Attempting to exit gracefully...> >> pppd[0]: Connect script failed> >> Status is: disconnected> >> pppd[0] died: Connect script failed (exit code 8)> >> Auto reconnect in 15 seconds.> >> Auto reconnecting.> >> Status is: connecting> >> pppd[0]: Plugin passwordfd.so loaded.> >> pppd[0]: --> WvDial: Internet dialer version 1.56 (abuild@poincare)> >> pppd[0]: --> Initializing modem.> >> pppd[0]: --> Sending: ATZ> >> pppd[0]: --> Sending: ATQ0> >> pppd[0]: --> Re-Sending: ATZ> >> pppd[0]: --> Modem not responding.> >> pppd[0]: Connect script failed> >> Status is: disconnected> >> pppd[0] died: Connect script failed (exit code 8)> >> Auto reconnect in 15 seconds.> >>> >> -----Result> >> As a result now slmodemd works with no longer period errors.> >> But at first attempt for Dial-in, "kinternet" imitate dialing but not> >> dial physically. I can't hear my local 277 phone ring.> >>> >> When hang-up and then Dial-in again kinternet said that "Modem Not> >> responding"> >> I am waiting for comments.What can be the problem ?> >> Thank's -> TeÅ�ekkürler.> >>> >> Note: I attached screenshots too.> >>> >>> >> Aydın.> >>> >>> >>> >>> >> Marvin Stodolsky wrote:> >>> >>> Aydin,> >>>> >>>> >>> error: period size 48 is not supported by playback (64).> >>> is sadly the known slmodemd problem for which we are awaiting a fix> >>> from maintainer Sasha> >>>> >>> MarvS> >>>> >>> On 8/4/07, AydÃ�±n MUTLU <aydin.mutlu@xxxxxxxxxxxxxxxxxxx> wrote:> >>>> >>>> >>>> Marvin hi again.> >>>> I applied one by one all your advice, but unfortunately not succeed.> >>>> I download and untar SLMODEMD.gcc4.1.tar.gz from linmodems site.> >>>> then ran it.> >>>>> >>>> #/root/tools/SLMODEMD.gcc4.1/slmodemd --alsa -c TURKEY hw:0,6> >>>> SmartLink Soft Modem: version 2.9.11 Feb 15 2007 23:08:19> >>>> symbolic link `/dev/ttySL0' -> `/dev/pts/4' created.> >>>> modem `hw:0,6' created. TTY is `/dev/pts/4'> >>>> Use `/dev/ttySL0' as modem device, Ctrl+C for termination.> >>>>> >>>> After tryed "kinternet" got the fallowing errors.> >>>>> >>>> error: period size 48 is not supported by playback (64).> >>>> error: period size 48 is not supported by playback (64).> >>>> error: period size 48 is not supported by playback (64).> >>>> error: period size 48 is not supported by playback (64).> >>>> error: period size 48 is not supported by playback (64).> >>>> error: period size 48 is not supported by playback (64).> >>>>> >>>> ---------------------------------------------------------> >>>> to prevent any miss configurations I installed an compiled Linux again but> >>>> resul is same as.> >>>> -----------------------------------------------------------> >>>>> >>>>> >>>> After that applied your newly updated scanModem script and atteched your> >>>> requested files.(aydin.txt and ModemData.txt)> >>>>> >>>> Thanks> >>>>> >>>>> >>>>> >>>>> >>>>> Jacques,> >>>>> Update attached> >>>>>> >>>>> Aydin> >>>>>> >>>>> Please use the update too. The output should now include a section like:> >>>>> --------> >>>>> Download from http://linmodems.technion.ac.il/packages/smartlink/> >>>>> the package SLMODEMD.gcc4.1.tar.gz having a compiled slmodemd. Unpack> >>>>> under Linux with:> >>>>> $ tar zxf SLMODEMD.gcc4.1.tar.gz> >>>>> and read instructions therein. But briefly, the modem is setup with> >>>>> command:> >>>>> sudo slmodemd -c TURKEY --alsa hw:0,1> >>>>> reporting dynamic creation of ports:> >>>>> /dev/ttySL0 --> /dev/pts/N , with N some number> >>>>> Read Smartlink.txt and Modem/YourSystem.txt for follow through guidance.> >>>>> --------> >>>>> though some version numbers will be different on your System.> >>>>>> >>>>> If you don't get such an extended output please run:> >>>>> # bash -x ./scanModem 2>&1 | tee aydin.txt> >>>>> gzip and send me the aydin.txt.gz> >>>>> Send me the new ModemData.txt too> >>>>>> >>>>> For your> >>>>> PCI slot PCI ID SubsystemID Name> >>>>> ---------- --------- --------- --------------> >>>>> 00:14.2 1002:4383 103c:30c2 Audio device: ATI> >>>>> Technologies Inc SB600 Azalia> >>>>>> >>>>> with /proc/asound/card0/codec#1 file> >>>>> Codec: Generic 11c1 Si3054> >>>>> Address: 1> >>>>> Vendor Id: 0x11c11040> >>>>>> >>>>> the possibility of service should be explored.> >>>>> Our LSI Inc contacts related that 0x11c11040 was there own> >>>>> implmentation and NOT a Si3054 derivative. But sometimes companies> >>>>> will buy rights to use a design like 0x11c11040 and fabricate the chip> >>>>> themselves, If the 103c:30c2 thus had the 0x11c11040 features> >>>>> fabricated onto a Si3054 base, there is some possibility that it might> >>>>> be serviced under Linux, as snd-hda-intel does have a generic Si3054> >>>>> support.> >>>>>> >>>>> So per the documentation in the SLMODEMD.gcc4.1.tar.gz package,> >>>>> run through the tests and copy ouyput information to the List ( not just> >>>>> me)> >>>>>> >>>>> MarvS> >>>>>> >>>>> On 8/3/07, Aydin MUTLU <aydin.mutlu@xxxxxxxxxx> wrote:> >>>>>> >>>>>> >>>>>> Hi Marvin.> >>>>>> Thanks for your quick reply;> >>>>>> I attached needed files that you have been requested.> >>>>>>> >>>>>> Marvin Stodolsky wrote:> >>>>>>> >>>>>>> >>>>>>> Aydin> >>>>>>>> >>>>>>> Re: 0x11c11040 Si3054> >>>>>>> Si3054 is a sort of generic base chip made by Silicon Instruments> >>>>>>> which is then specailized to the requirements of several other modem> >>>>>>> chip manufacturers including LSi/ (formerly AgereSystems) with Vendor> >>>>>>> ID 11c1.> >>>>>>> Unfortunately LSI has not provide Linux support for the 0x11c11040> >>>>>>>> >>>>>>>> >>>>>> chip> >>>>>>> >>>>>>> >>>>>>> though we have achieved functionality of two other 11c1???? chips> >>>>>>> through the combination of the ALSA snd-hda-intel driver and the> >>>>>>> Smartlink slmodemd helper.> >>>>>>>> >>>>>>> This is no prospect for 0x11c11040 support in the short term.> >>>>>>> Likely you will need other modem hardware for Linux work.> >>>>>>> The more expensive Controller chipset modems are the least fuss in the> >>>>>>>> >>>>>>>> >>>>>> long run.> >>>>>>> >>>>>>> >>>>>>> Would you please:> >>>>>>> $ cp -a /proc/asound aydin> >>>>>>> $ tar cfz aydin.tgz aydin/> >>>>>>> and send me the aydin.tgz,> >>>>>>> This will help me setup proper scanModem responses to "0x11c11040> >>>>>>>> >>>>>>>> >>>>>> Si3054"> >>>>>>> >>>>>>> >>>>>>> This particular combination has not been encountered before.> >>>>>>> Please also send along the ModemData.txt output from scanModem.> >>>>>>>> >>>>>>> Incidentally> >>>>>>> Seksan a seksan iki, ben biologie bolumo baskan, Bogaszici U de.> >>>>>>>> >>>>>>> MarvS> >>>>>>>> >>>>>>> On 8/2/07, AydÃ���Ã��Ã�±n MUTLU <aydin.mutlu@xxxxxxxxxxxxxxxxxxx>> >>>>>>>> >>>>>>>> >>>> wrote:> >>>>> >>>>> >>>>>>>> Hi Marvin,> >>>>>>>> I am trying to install OpenSuse10.2 on Compaq 6715b notebook but I> >>>>>>>> couldn't properly setup the modem, "ALSA soft modem 0x11c11040> >>>>>>>>> >>>>>>>>> >>>>>> Si3054".> >>>>>>> >>>>>>> >>>>>>>> I have been searching on the net for days but I couldn't reach any> >>>>>>>>> >>>>>>>>> >>>>>> useful> >>>>>>> >>>>>>> >>>>>>>> information. Finally I saw your explanations about this modem that> >>>>>>>>> >>>>>>>>> >>>>>> it is> >>>>>>> >>>>>>> >>>>>>>> not recognized by Linux.> >>>>>>>>> >>>>>>>> Do you have any new information or suggestion about the ALSA Si3054> >>>>>>>> modem's drivers.> >>>>>>>>> >>>>>>>> thank's.> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> --> >>>>>>>> AydÃ���Ã��Ã�±n MUTLU> >>>>>>>> Izmir University Of Economics> >>>>>>>> System Administrator.> >>>>>>>>> >>>>>>>> Sakarya Cad No:156> >>>>>>>> 35330 BalÃ���Ã��Ã�§ova-Ã���Ã��Ã�°ZMR> >>>>>>>> 0232 488 81 81> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>> --> >>>>>> AydÃ��Ã�±n MUTLU> >>>>>> BÃ��Ã�°M Sistem YÃ��Ã�¶neticisi> >>>>>> aydin.mutlu@xxxxxxxxxx> >>>>>>> >>>>>> Ã��Ã�°zmir Ekonomi Ã���niversitesi> >>>>>> Sakarya Cad. No: 156> >>>>>> BalÃ��Ã�§ova - Ã��Ã�°ZMÃ��Ã�°R> >>>>>> 0232 488 81 81> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>> --> >>>> AydÃ�±n MUTLU> >>>> Izmir University Of Economics> >>>> System Administrator.> >>>>> >>>> Sakarya Cad No:156> >>>> 35330 BalÃ�§ova-Ã�°ZMR> >>>> 0232 488 81 81> >>>>> >>>>> >>>>> >> --> >> Aydın MUTLU> >> BÄ°M Sistem Yöneticisi> >> aydin.mutlu@xxxxxxxxxx> >>> >> Ä°zmir Ekonomi Ã�niversitesi> >> Sakarya Cad. No: 156> >> Balçova - Ä°ZMÄ°R> >> 0232 488 81 81> >>> >>> >>> >>>>> --> Aydın MUTLU> BİM Sistem Yöneticisi> aydin.mutlu@xxxxxxxxxx>> İzmir Ekonomi Üniversitesi> Sakarya Cad. No: 156> Balçova - İZMİR> 0232 488 81 81>>
