Linux Intel GFX
[Prev Page][Next Page]
- Re: [RFC PATCH 1/2] drm/msm/dpu: add dsc helper functions, (continued)
- [PATCH] drm/i915: Set wedged if enable guc communication failed,
Zhanjun Dong
- [PATCH] drm/i915: Move MCR_REG define to i915_reg_defs.h,
Lucas De Marchi
- [PATCH v6 00/15] dma-fence: Deadline awareness,
Rob Clark
- [linux-next:master] BUILD REGRESSION 4d6d7ce9baaf9e67a85a53afc69a36af716f7670, kernel test robot
- [PATCH] drm/i915/adlp: Restoring ADL-P/RPL-U IDs.,
Rodrigo Vivi
- [PATCH 0/3] drm/i915: track gt->wakerefs,
Andrzej Hajda
- [PATCH] drm/i915: Remove unused tmp assignment.,
Rodrigo Vivi
- [PATCH v4 00/22] drm/i915/mtl: Add C10 and C20 phy support,
Mika Kahola
- [PATCH v4 01/22] drm/i915/mtl: Initial DDI port setup, Mika Kahola
- [PATCH v4 02/22] drm/i915/mtl: Add DP rates, Mika Kahola
- [PATCH v4 03/22] drm/i915/mtl: Create separate reg file for PICA registers, Mika Kahola
- [PATCH v4 04/22] drm/i915/mtl: Add Support for C10 PHY message bus and pll programming, Mika Kahola
- [PATCH v4 05/22] drm/i915/mtl: Add C10 phy programming for HDMI, Mika Kahola
- [PATCH v4 06/22] drm/i915/mtl: Add vswing programming for C10 phys, Mika Kahola
- [PATCH v4 08/22] drm/i915/mtl: C20 PLL programming, Mika Kahola
- [PATCH v4 07/22] drm/i915/mtl: Add support for PM DEMAND, Mika Kahola
- [PATCH v4 10/22] drm/i915/mtl: Dump C20 pll hw state, Mika Kahola
- [PATCH v4 11/22] drm/i915/mtl: C20 port clock calculation, Mika Kahola
- [PATCH v4 09/22] drm/i915/mtl: C20 HW readout, Mika Kahola
- [PATCH v4 12/22] drm/i915/mtl: C20 HDMI state calculations, Mika Kahola
- [PATCH v4 13/22] drm/i915/mtl: Add voltage swing sequence for C20, Mika Kahola
- [PATCH v4 15/22] drm/i915/mtl: Enabling/disabling sequence Thunderbolt pll, Mika Kahola
- [PATCH v4 17/22] drm/i915/mtl: Enable TC ports, Mika Kahola
- [PATCH v4 16/22] drm/i915/mtl: Readout Thunderbolt HW state, Mika Kahola
- [PATCH v4 14/22] drm/i915/mtl: For DP2.0 10G and 20G rates use MPLLA, Mika Kahola
- [PATCH v4 18/22] drm/i915/mtl: MTL PICA hotplug detection, Mika Kahola
- [PATCH v4 20/22] drm/i915/mtl: Power up TCSS, Mika Kahola
- [PATCH v4 19/22] drm/i915/mtl: Define mask for DDI AUX interrupts, Mika Kahola
- [PATCH v4 22/22] drm/i915/mtl: Pin assignment for TypeC, Mika Kahola
- [PATCH v4 21/22] drm/i915/mtl: TypeC HPD live status query, Mika Kahola
- ✗ Fi.CI.CHECKPATCH: warning for drm/i915/mtl: Add C10 and C20 phy support (rev6), Patchwork
- ✓ Fi.CI.BAT: success for drm/i915/mtl: Add C10 and C20 phy support (rev6), Patchwork
- ✓ Fi.CI.IGT: success for drm/i915/mtl: Add C10 and C20 phy support (rev6), Patchwork
- ✗ Fi.CI.BUILD: failure for drm/i915/mtl: Add C10 and C20 phy support (rev7), Patchwork
- [PATCH v4 0/3] drm/helpers: Make the suballocation manager drm generic,
Thomas Hellström
- [PATCH v2] drm/i915/mtl: Add engine TLB invalidation,
Matt Roper
- [PATCH 1/2] drm/i915: Whitelist COMMON_SLICE_CHICKEN3 for UMD access,
Matt Roper
- [PATCH] drm/i915/mtl: X-Tile support changes to client blits,
Jonathan Cavitt
- [PATCH] drm/i915/mtl: Apply Wa_14017073508 for MTL SoC Step,
Badal Nilawar
- [PATCH 0/2] Fix a couple of issues with the GSC worker timing,
Daniele Ceraolo Spurio
- [PATCH] drm/i915: Preserve crtc_state->inherited during state clearing,
Ville Syrjala
- [PATCH v3 0/3] drm/helpers: Make the suballocation manager drm generic,
Thomas Hellström
- [PATCH v3 00/22] drm/i915/mtl: Add C10 and C20 phy support,
Mika Kahola
- [PATCH v3 01/22] drm/i915/mtl: Initial DDI port setup, Mika Kahola
- [PATCH v3 03/22] drm/i915/mtl: Create separate reg file for PICA registers, Mika Kahola
- [PATCH v3 02/22] drm/i915/mtl: Add DP rates, Mika Kahola
- [PATCH v3 11/22] drm/i915/mtl: C20 port clock calculation, Mika Kahola
- [PATCH v3 04/22] drm/i915/mtl: Add Support for C10 PHY message bus and pll programming, Mika Kahola
- [PATCH v3 12/22] drm/i915/mtl: C20 HDMI state calculations, Mika Kahola
- [PATCH v3 06/22] drm/i915/mtl: Add vswing programming for C10 phys, Mika Kahola
- [PATCH v3 10/22] drm/i915/mtl: Dump C20 pll hw state, Mika Kahola
- [PATCH v3 14/22] drm/i915/mtl: For DP2.0 10G and 20G rates use MPLLA, Mika Kahola
- [PATCH v3 08/22] drm/i915/mtl: C20 PLL programming, Mika Kahola
- [PATCH v3 09/22] drm/i915/mtl: C20 HW readout, Mika Kahola
- [PATCH v3 15/22] drm/i915/mtl: Enabling/disabling sequence Thunderbolt pll, Mika Kahola
- [PATCH v3 16/22] drm/i915/mtl: Readout Thunderbolt HW state, Mika Kahola
- [PATCH v3 22/22] drm/i915/mtl: Pin assignment for TypeC, Mika Kahola
- [PATCH v3 18/22] drm/i915/mtl: MTL PICA hotplug detection, Mika Kahola
- [PATCH v3 21/22] drm/i915/mtl: TypeC HPD live status query, Mika Kahola
- [PATCH v3 13/22] drm/i915/mtl: Add voltage swing sequence for C20, Mika Kahola
- [PATCH v3 20/22] drm/i915/mtl: Power up TCSS, Mika Kahola
- [PATCH v3 19/22] drm/i915/mtl: Define mask for DDI AUX interrupts, Mika Kahola
- [PATCH v3 07/22] drm/i915/mtl: Add support for PM DEMAND, Mika Kahola
- [PATCH v3 17/22] drm/i915/mtl: Enable TC ports, Mika Kahola
- [PATCH v3 05/22] drm/i915/mtl: Add C10 phy programming for HDMI, Mika Kahola
- ✗ Fi.CI.BUILD: warning for drm/i915/mtl: Add C10 and C20 phy support (rev5), Patchwork
- ✗ Fi.CI.CHECKPATCH: warning for drm/i915/mtl: Add C10 and C20 phy support (rev5), Patchwork
- ✗ Fi.CI.BAT: failure for drm/i915/mtl: Add C10 and C20 phy support (rev5), Patchwork
- [PATCH] drm/i915/dp: Don't roundup max bpp, while computing compressed bpp,
Ankit Nautiyal
- [PATCH 0/2] Selftest fixes,
Anshuman Gupta
- [PULL] gvt-next-fixes,
Zhenyu Wang
- [PATCH] drm/i915/dg2: Add HDMI pixel clock frequencies 267.30 and 319.89 MHz,
Ankit Nautiyal
- [PATCH] drm/i915/gsc: Fix the Driver-FLR completion,
Alan Previn
- ✓ Fi.CI.BAT: success for drm/i915/gsc: Fix the Driver-FLR completion, Patchwork
- ✓ Fi.CI.IGT: success for drm/i915/gsc: Fix the Driver-FLR completion, Patchwork
- Re: [PATCH] drm/i915/gsc: Fix the Driver-FLR completion, Belgaumkar, Vinay
- Re: [PATCH] drm/i915/gsc: Fix the Driver-FLR completion, Teres Alexis, Alan Previn
- Re: [PATCH] drm/i915/gsc: Fix the Driver-FLR completion, Ceraolo Spurio, Daniele
- <Possible follow-ups>
- [PATCH] drm/i915/gsc: Fix the Driver-FLR completion, Alan Previn
- [PATCH] drm/i915/gsc: Fix the Driver-FLR completion, Alan Previn
- [linux-next:master] BUILD REGRESSION aaf70d5ad5e2b06a8050c51e278b0c3a14fabef5, kernel test robot
- [PATCH] drm/i915: Use correct huge page manager for MTL,
Jonathan Cavitt
- [PATCH] drm/i915/audio: Track audio state per-transcoder,
Ville Syrjala
- [PATCH 0/2] Add quirk to disable PSR 2 on Tongfang PHxTxX1 and PHxTQx1,
Werner Sembach
- [PATCH v2 0/9] Misc Meteorlake patches,
Radhakrishna Sripada
- [PATCH v2 6/9] drm/i915/mtl: Drop FLAT CCS check, Radhakrishna Sripada
- [PATCH v2 1/9] drm/i915/mtl: Fix Wa_14015855405 implementation, Radhakrishna Sripada
- [PATCH v2 4/9] drm/i915/fbdev: lock the fbdev obj before vma pin, Radhakrishna Sripada
- [PATCH v2 2/9] drm/i915/gt: generate per tile debugfs files, Radhakrishna Sripada
- [PATCH v2 8/9] drm/i915/mtl: define MTL related ccs modifiers, Radhakrishna Sripada
- [PATCH v2 5/9] drm/i915/display/mtl: Program latch to phy reset, Radhakrishna Sripada
- [PATCH v2 9/9] drm/i915/mtl: Add handling for MTL ccs modifiers, Radhakrishna Sripada
- [PATCH v2 3/9] drm/i915/mtl: make IRQ reset and postinstall multi-gt aware, Radhakrishna Sripada
- [PATCH v2 7/9] drm/i915/mtl: Add MTL for remapping CCS FBs, Radhakrishna Sripada
- ✗ Fi.CI.SPARSE: warning for Misc Meteorlake patches (rev2), Patchwork
- ✓ Fi.CI.BAT: success for Misc Meteorlake patches (rev2), Patchwork
- ✓ Fi.CI.IGT: success for Misc Meteorlake patches (rev2), Patchwork
- [PATCH 0/7] Enable YCbCr420 format for VDSC,
Suraj Kandpal
- [PATCH 1/7] drm/dp_helper: Add helper to check DSC support with given o/p format, Suraj Kandpal
- [PATCH 2/7] drm/i915/dp: Check if DSC supports the given output_format, Suraj Kandpal
- [PATCH 3/7] drm/i915: Adding the new registers for DSC, Suraj Kandpal
- [PATCH 4/7] drm/i915: Enable YCbCr420 for VDSC, Suraj Kandpal
- [PATCH 5/7] drm/i915/display: Fill in native_420 field, Suraj Kandpal
- [PATCH 6/7] drm/i915/vdsc: Check slice design requirement, Suraj Kandpal
- [PATCH 7/7] drm/i915/dsc: Add debugfs entry to validate DSC output formats, Suraj Kandpal
- ✗ Fi.CI.CHECKPATCH: warning for Enable YCbCr420 format for VDSC, Patchwork
- ✗ Fi.CI.BAT: failure for Enable YCbCr420 format for VDSC, Patchwork
- ✓ Fi.CI.BAT: success for Enable YCbCr420 format for VDSC (rev2), Patchwork
- ✗ Fi.CI.IGT: failure for Enable YCbCr420 format for VDSC (rev2), Patchwork
- Re: [PATCH 0/7] Enable YCbCr420 format for VDSC, Jani Nikula
- [PATCH v3 00/22] drm/i915: Init DDI ports in VBT order,
Ville Syrjala
- [PATCH v3 01/22] drm/i915: Populate dig_port->connected() before connector init, Ville Syrjala
- [PATCH v3 02/22] drm/i915: Fix SKL DDI A digital port .connected(), Ville Syrjala
- [PATCH v3 03/22] drm/i915: Get rid of the gm45 HPD live state nonsense, Ville Syrjala
- [PATCH v3 05/22] drm/i915: Introduce intel_hpd_detection(), Ville Syrjala
- [PATCH v3 04/22] drm/i915: Introduce <platoform>_hotplug_mask(), Ville Syrjala
- [PATCH v3 09/22] drm/i915: Flip VBT DDC pin maps around, Ville Syrjala
- [PATCH v3 13/22] drm/i915: Assert that device info bitmasks have enough bits, Ville Syrjala
- [PATCH v3 08/22] drm/i915: Split map_aux_ch() into per-platform arrays, Ville Syrjala
- [PATCH v3 07/22] drm/i915: Sanitize child devices later, Ville Syrjala
- [PATCH v3 12/22] drm/i915: Introduce device info port_mask, Ville Syrjala
- [PATCH v3 11/22] drm/i915: Remove bogus DDI-F from hsw/bdw output init, Ville Syrjala
- [PATCH v3 06/22] drm/i915: Check HPD live state during eDP probe, Ville Syrjala
- [PATCH v3 10/22] drm/i915: Nuke intel_bios_is_port_dp_dual_mode(), Ville Syrjala
- [PATCH v3 14/22] drm/i915: Assert that the port being initialized is valid, Ville Syrjala
- [PATCH v3 16/22] drm/i915: Init DDI outputs based on port_mask on skl+, Ville Syrjala
- [PATCH v3 15/22] drm/i915: Beef up SDVO/HDMI port checks, Ville Syrjala
- [PATCH v3 21/22] drm/i915: Initialize dig_port->aux_ch to NONE to be sure, Ville Syrjala
- [PATCH v3 18/22] drm/i915: Convert HSW/BDW to use VBT driven DDI probe, Ville Syrjala
- [PATCH v3 19/22] drm/i915: Remove DDC pin sanitation, Ville Syrjala
- [PATCH v3 22/22] drm/i915: Only populate aux_ch is really needed, Ville Syrjala
- [PATCH v3 17/22] drm/i915: Try to initialize DDI/ICL+ DSI ports for every VBT child device, Ville Syrjala
- [PATCH v3 20/22] drm/i915: Remove AUX CH sanitation, Ville Syrjala
- ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Init DDI ports in VBT order (rev3), Patchwork
- ✓ Fi.CI.BAT: success for drm/i915: Init DDI ports in VBT order (rev3), Patchwork
- ✓ Fi.CI.IGT: success for drm/i915: Init DDI ports in VBT order (rev3), Patchwork
- Re: [PATCH v3 00/22] drm/i915: Init DDI ports in VBT order, Ville Syrjälä
- Re: [PATCH v3 00/22] drm/i915: Init DDI ports in VBT order, Kai-Heng Feng
- [PATCH 1/2] drm/i915/gt: Ensure memory quiesced before invalidation,
Jonathan Cavitt
- [linux-next:master] BUILD REGRESSION 465461cf48465b8a0a54025db5ae2b3df7a04577, kernel test robot
- [PATCH] drm/i915/gen12: Update combo PHY init sequence,
Matt Roper
- [RFC PATCH 0/2] Implement sel_fetch disable for planes,
Jouni Högander
- [PATCH 1/4] drm/i915/opregion: Fix opregion setup during system resume on platforms without display,
Imre Deak
- [PATCH] drm/i915/psr: Use calculated io and fast wake lines,
Jouni Högander
- [PATCH v4 00/19] Add vfio_device cdev for iommufd support,
Yi Liu
- [PATCH v4 02/19] vfio: Refine vfio file kAPIs, Yi Liu
- [PATCH v4 05/19] kvm/vfio: Accept vfio device file from userspace, Yi Liu
- [PATCH v4 01/19] vfio: Allocate per device file structure, Yi Liu
- [PATCH v4 04/19] kvm/vfio: Rename kvm_vfio_group to prepare for accepting vfio device fd, Yi Liu
- [PATCH v4 10/19] vfio: Add infrastructure for bind_iommufd from userspace, Yi Liu
- [PATCH v4 06/19] vfio: Pass struct vfio_device_file * to vfio_device_open/close(), Yi Liu
- [PATCH v4 12/19] vfio-iommufd: Add detach_ioas for emulated VFIO devices, Yi Liu
- [PATCH v4 08/19] vfio/pci: Update comment around group_fd get in vfio_pci_ioctl_pci_hot_reset(), Yi Liu
- [PATCH v4 11/19] vfio-iommufd: Add detach_ioas support for physical VFIO devices, Yi Liu
- [PATCH v4 09/19] vfio/pci: Accept device fd for hot reset, Yi Liu
- [PATCH v4 17/19] vfio: Add VFIO_DEVICE_AT[DE]TACH_IOMMUFD_PT, Yi Liu
- [PATCH v4 03/19] vfio: Accept vfio device file in the driver facing kAPI, Yi Liu
- [PATCH v4 19/19] docs: vfio: Add vfio device cdev description, Yi Liu
- [PATCH v4 07/19] vfio: Block device access via device fd until device is opened, Yi Liu
- [PATCH v4 14/19] vfio: Make vfio_device_open() single open for device cdev path, Yi Liu
- [PATCH v4 13/19] vfio: Add cdev_device_open_cnt to vfio_group, Yi Liu
- [PATCH v4 15/19] vfio: Add cdev for vfio_device, Yi Liu
- [PATCH v4 18/19] vfio: Compile group optionally, Yi Liu
- [PATCH v4 16/19] vfio: Add VFIO_DEVICE_BIND_IOMMUFD, Yi Liu
- ✗ Fi.CI.BUILD: failure for Add vfio_device cdev for iommufd support (rev3), Patchwork
- ✗ Fi.CI.BUILD: failure for Add vfio_device cdev for iommufd support (rev4), Patchwork
- [PATCH v2 00/18] drm/i915: Init DDI ports in VBT order,
Ville Syrjala
- [PATCH v2 01/18] drm/i915: Populate dig_port->connected() before connector init, Ville Syrjala
- [PATCH v2 02/18] drm/i915: Fix SKL DDI A digital port .connected(), Ville Syrjala
- [PATCH v2 03/18] drm/i915: Get rid of the gm45 HPD live state nonsense, Ville Syrjala
- [PATCH v2 04/18] drm/i915: Introduce <platoform>_hotplug_mask(), Ville Syrjala
- [PATCH v2 05/18] drm/i915: Introduce intel_hpd_detection(), Ville Syrjala
- [PATCH v2 06/18] drm/i915: Check HPD live state during eDP probe, Ville Syrjala
- [PATCH v2 07/18] drm/i915: Sanitize child devices later, Ville Syrjala
- [PATCH v2 08/18] drm/i915: Split map_aux_ch() into per-platform arrays, Ville Syrjala
- [PATCH v2 09/18] drm/i915: Flip VBT DDC pin maps around, Ville Syrjala
- [PATCH v2 10/18] drm/i915: Nuke intel_bios_is_port_dp_dual_mode(), Ville Syrjala
- [PATCH v2 11/18] drm/i915: Remove bogus DDI-F from hsw/bdw output init, Ville Syrjala
- [PATCH v2 12/18] drm/i915: Introduce device info port_mask, Ville Syrjala
- [PATCH v2 13/18] drm/i915: Assert that device info bitmasks have enough bits, Ville Syrjala
- [PATCH v2 14/18] drm/i915: Assert that the port being initialized is valid, Ville Syrjala
- [PATCH v2 15/18] drm/i915: Beef up SDVO/HDMI port checks, Ville Syrjala
- [PATCH v2 16/18] drm/i915: Init DDI outputs based on port_mask on skl+, Ville Syrjala
- [PATCH v2 17/18] drm/i915: Try to initialize DDI/ICL+ DSI ports for every VBT child device, Ville Syrjala
- [PATCH v2 18/18] drm/i915: Convert HSW/BDW to use VBT driven DDI probe, Ville Syrjala
- ✗ Fi.CI.SPARSE: warning for drm/i915: Init DDI ports in VBT order (rev2), Patchwork
- ✓ Fi.CI.BAT: success for drm/i915: Init DDI ports in VBT order (rev2), Patchwork
- ✓ Fi.CI.IGT: success for drm/i915: Init DDI ports in VBT order (rev2), Patchwork
- [PATCH v5 00/14] dma-fence: Deadline awareness,
Rob Clark
- [PATCH 00/17] drm/i915: Init DDI ports in VBT order,
Ville Syrjala
- [PATCH 01/17] drm/i915: Populate dig_port->connected() before connector init, Ville Syrjala
- [PATCH 02/17] drm/i915: Get rid of the gm45 HPD live state nonsense, Ville Syrjala
- [PATCH 03/17] drm/i915: Introduce <platoform>_hotplug_mask(), Ville Syrjala
- [PATCH 04/17] drm/i915: Introduce intel_hpd_detection(), Ville Syrjala
- [PATCH 05/17] drm/i915: Check HPD live state during eDP probe, Ville Syrjala
- [PATCH 06/17] drm/i915: Sanitize child devices later, Ville Syrjala
- [PATCH 07/17] drm/i915: Split map_aux_ch() into per-platform arrays, Ville Syrjala
- [PATCH 09/17] drm/i915: Nuke intel_bios_is_port_dp_dual_mode(), Ville Syrjala
- [PATCH 08/17] drm/i915: Flip VBT DDC pin maps around, Ville Syrjala
- [PATCH 10/17] drm/i915: Remove bogus DDI-F from hsw/bdw output init, Ville Syrjala
- [PATCH 11/17] drm/i915: Introduce device info port_mask, Ville Syrjala
- [PATCH 12/17] drm/i915: Assert that device info bitmasks have enough bits, Ville Syrjala
- [PATCH 13/17] drm/i915: Assert that the port being initialized is valid, Ville Syrjala
- [PATCH 14/17] drm/i915: Beef up SDVO/HDMI port checks, Ville Syrjala
- [PATCH 15/17] drm/i915: Init DDI outputs based on port_mask on skl+, Ville Syrjala
- [PATCH 17/17] drm/i915: Convert HSW/BDW to use VBT driven DDI probe, Ville Syrjala
- [PATCH 16/17] drm/i915: Try to initialize DDI/ICL+ DSI ports for every VBT child device, Ville Syrjala
- ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Init DDI ports in VBT order, Patchwork
- ✗ Fi.CI.BAT: failure for drm/i915: Init DDI ports in VBT order, Patchwork
- [PATCH] drm/i915/sseu: fix max_subslices array-index-out-of-bounds access,
Andrea Righi
- ✗ Fi.CI.SPARSE: warning for drm/i915/sseu: fix max_subslices array-index-out-of-bounds access, Patchwork
- ✗ Fi.CI.BAT: failure for drm/i915/sseu: fix max_subslices array-index-out-of-bounds access, Patchwork
- Re: [PATCH] drm/i915/sseu: fix max_subslices array-index-out-of-bounds access, Tvrtko Ursulin
- ✗ Fi.CI.SPARSE: warning for drm/i915/sseu: fix max_subslices array-index-out-of-bounds access (rev2), Patchwork
- ✗ Fi.CI.BAT: failure for drm/i915/sseu: fix max_subslices array-index-out-of-bounds access (rev2), Patchwork
- ✗ Fi.CI.CHECKPATCH: warning for drm/i915/sseu: fix max_subslices array-index-out-of-bounds access (rev3), Patchwork
- ✗ Fi.CI.BAT: failure for drm/i915/sseu: fix max_subslices array-index-out-of-bounds access (rev3), Patchwork
- ✗ Fi.CI.CHECKPATCH: warning for drm/i915/sseu: fix max_subslices array-index-out-of-bounds access (rev4), Patchwork
- ✓ Fi.CI.BAT: success for drm/i915/sseu: fix max_subslices array-index-out-of-bounds access (rev4), Patchwork
- ✗ Fi.CI.IGT: failure for drm/i915/sseu: fix max_subslices array-index-out-of-bounds access (rev4), Patchwork
- ✓ Fi.CI.BAT: success for drm/i915/sseu: fix max_subslices array-index-out-of-bounds access (rev4), Patchwork
- ✓ Fi.CI.IGT: success for drm/i915/sseu: fix max_subslices array-index-out-of-bounds access (rev4), Patchwork
- ✓ Fi.CI.IGT: success for drm/i915/sseu: fix max_subslices array-index-out-of-bounds access (rev4), Patchwork
- ✓ Fi.CI.IGT: success for drm/i915/sseu: fix max_subslices array-index-out-of-bounds access (rev4), Patchwork
- [PATCH] drm/i915: Get HDR DPCD refresh timeout from VBT,
Ville Syrjala
- [PATCH 1/2] drm/i915: Fix audio ELD handling for DP MST,
Ville Syrjala
- [PATCH i-g-t] tests/gem_barrier_race: Extend support over compute engines,
Janusz Krzysztofik
- [PATCH v9 00/14] Handle BPC for HDMI2.1 PCON without DSC1.2 sink and other fixes,
Ankit Nautiyal
- [PATCH v9 01/14] drm/i915/display: Add new member to configure PCON color conversion, Ankit Nautiyal
- [PATCH v9 03/14] drm/i915/dp: Add Scaler constraint for YCbCr420 output, Ankit Nautiyal
- [PATCH v9 02/14] drm/i915/display: Add new member in intel_dp to store ycbcr420 passthrough cap, Ankit Nautiyal
- [PATCH v9 06/14] drm/i915/display: Use sink_format instead of ycbcr420_output flag, Ankit Nautiyal
- [PATCH v9 04/14] drm/i915/dp: Replace intel_dp.dfp members with the new crtc_state sink_format, Ankit Nautiyal
- [PATCH v9 05/14] drm/i915/dp: Compute output format with/without DSC, Ankit Nautiyal
- [PATCH v9 07/14] drm/i915/dp: Rearrange check for illegal mode and comments in mode_valid, Ankit Nautiyal
- [PATCH v9 08/14] drm/i915/dp: Consider output_format while computing dsc bpp for mode_valid, Ankit Nautiyal
- [PATCH v9 11/14] drm/i915/dp: Avoid DSC with output_format YCBCR420, Ankit Nautiyal
- [PATCH v9 14/14] drm/i915/dp: Add a wrapper to check frl/tmds downstream constraints, Ankit Nautiyal
- [PATCH v9 13/14] drm/i915/dp: Fix FRL BW check for HDMI2.1 DFP, Ankit Nautiyal
- [PATCH v9 09/14] drm/i915/dp: Check if mode can be supported with dsc compressed bpp, Ankit Nautiyal
- [PATCH v9 10/14] drm/i915/display: Add helper function to check if sink_format is 420, Ankit Nautiyal
- [PATCH v9 12/14] drm/i915/dp: Handle BPP where HDMI2.1 DFP doesn't support DSC, Ankit Nautiyal
- ✓ Fi.CI.BAT: success for Handle BPC for HDMI2.1 PCON without DSC1.2 sink and other fixes (rev10), Patchwork
- ✓ Fi.CI.IGT: success for Handle BPC for HDMI2.1 PCON without DSC1.2 sink and other fixes (rev10), Patchwork
- [PATCH 00/14] Handle BPC for HDMI2.1 PCON without DSC1.2 sink and other fixes,
Ankit Nautiyal
- [PATCH 01/14] drm/i915/display: Add new member to configure PCON color conversion, Ankit Nautiyal
- [PATCH 03/14] drm/i915/dp: Add Scaler constraint for YCbCr420 output, Ankit Nautiyal
- [PATCH 04/14] drm/i915/dp: Replace intel_dp.dfp members with the new crtc_state sink_format, Ankit Nautiyal
- [PATCH 06/14] drm/i915/display: Use sink_format instead of ycbcr420_output flag, Ankit Nautiyal
- [PATCH 02/14] drm/i915/display: Add new member in intel_dp to store ycbcr420 passthrough cap, Ankit Nautiyal
- [PATCH 09/14] drm/i915/dp: Check if mode can be supported with dsc compressed bpp, Ankit Nautiyal
- [PATCH 08/14] drm/i915/dp: Consider output_format while computing dsc bpp for mode_valid, Ankit Nautiyal
- [PATCH 05/14] drm/i915/dp: Compute output format with/without DSC, Ankit Nautiyal
- [PATCH 10/14] drm/i915/display: Add helper function to check if sink_format is 420, Ankit Nautiyal
- [PATCH 07/14] drm/i915/dp: Rearrange check for illegal mode and comments in mode_valid, Ankit Nautiyal
- [PATCH 13/14] drm/i915/dp: Fix FRL BW check for HDMI2.1 DFP, Ankit Nautiyal
- [PATCH 12/14] drm/i915/dp: Handle BPP where HDMI2.1 DFP doesn't support DSC, Ankit Nautiyal
- [PATCH 11/14] drm/i915/dp: Avoid DSC with output_format YCBCR420, Ankit Nautiyal
- [PATCH 14/14] drm/i915/dp: Add a wrapper to check frl/tmds downstream constraints, Ankit Nautiyal
- ✗ Fi.CI.BUILD: failure for Handle BPC for HDMI2.1 PCON without DSC1.2 sink and other fixes (rev9), Patchwork
- [PATCH v4 00/14] dma-fence: Deadline awareness,
Rob Clark
- [PATCH 0/2] Improvements to GuC load failure handling,
John . C . Harrison
- [PATCH v2 0/2] Clean up some GuC related failure paths,
John . C . Harrison
- [PATCH] gen8_ppgtt: Use correct huge page manager for MTL,
Jonathan Cavitt
- [PATCH] drm/i915/mtl: Add engine TLB invalidation,
Matt Roper
- [PATCH] drm/i915/selftests: Drop igt_cs_tlb,
Jonathan Cavitt
- [linux-next:master] BUILD REGRESSION c068f40300a0eaa34f7105d137a5560b86951aa9, kernel test robot
- [PATCH] drm/i915/guc: avoid FIELD_PREP warning,
Arnd Bergmann
- [PATCH 1/7] drm/amdgpu: use amdgpu_res_cursor in more places v2,
Christian König
- [PATCH v3] drm/i915/display/power: use intel_de_rmw if possible,
Andrzej Hajda
- [PATCH v2 0/3] More error capture improvements,
John . C . Harrison
- [PATCH v2 0/9] Add OAM support for MTL,
Umesh Nerlige Ramappa
- [PATCH v2 4/9] drm/i915/perf: Group engines into respective OA groups, Umesh Nerlige Ramappa
- [PATCH v2 3/9] drm/i915/perf: Validate OA sseu config outside switch, Umesh Nerlige Ramappa
- [PATCH v2 1/9] drm/i915/perf: Drop wakeref on GuC RC error, Umesh Nerlige Ramappa
- [PATCH v2 7/9] drm/i915/perf: Handle non-power-of-2 reports, Umesh Nerlige Ramappa
- [PATCH v2 6/9] drm/i915/perf: Parse 64bit report header formats correctly, Umesh Nerlige Ramappa
- [PATCH v2 5/9] drm/i915/perf: Fail modprobe if i915_perf_init fails on OOM, Umesh Nerlige Ramappa
- [PATCH v2 8/9] drm/i915/perf: Add engine class instance parameters to perf, Umesh Nerlige Ramappa
- [PATCH v2 2/9] drm/i915/perf: Add helper to check supported OA engines, Umesh Nerlige Ramappa
- [PATCH v2 9/9] drm/i915/perf: Add support for OA media units, Umesh Nerlige Ramappa
- ✗ Fi.CI.SPARSE: warning for Add OAM support for MTL (rev2), Patchwork
- ✓ Fi.CI.BAT: success for Add OAM support for MTL (rev2), Patchwork
- ✓ Fi.CI.IGT: success for Add OAM support for MTL (rev2), Patchwork
- [PATCH 1/4] drm/i915: Restructure intel_bios_port_aux_ch(),
Ville Syrjala
- [PATCH 0/4] drm/displayid: use primary use case to figure out non-desktop,
Jani Nikula
- [PATCH 0/2] PL1 power limit fixes for ATSM,
Ashutosh Dixit
- [linux-next:master] BUILD REGRESSION 509583475828c4fd86897113f78315c1431edcc3, kernel test robot
- [PATCH v2 1/3] drm/i915/power: move dc state members to struct i915_power_domains,
Jani Nikula
- [PATCH 0/1] drm: Add a gpu page-table walker,
Thomas Hellström
- [PATCH] drm/fb-helper: Remove drm_fb_helper_unprepare() from drm_fb_helper_fini(),
Thomas Zimmermann
- [PATCH] drm/i915: Make kobj_type structures constant,
Thomas Weißschuh
- 2023 X.Org Foundation Membership deadline for voting in the election,
Ricardo Garcia
- 2023 X.Org Board of Directors Elections Nomination period is NOW,
Ricardo Garcia
- [RFC v3 0/9] Waitboost drm syncobj waits,
Tvrtko Ursulin
- [RFC 1/9] dma-fence: Move i915 helpers into common, Tvrtko Ursulin
- [RFC 2/9] dma-fence: Add callback initialization helper, Tvrtko Ursulin
- [RFC 4/9] drm/vmwgfx: Use fence callback initialization helper, Tvrtko Ursulin
- [RFC 6/9] drm/syncobj: Mark syncobj waits as external waiters, Tvrtko Ursulin
- [RFC 5/9] dma-fence: Track explicit waiters, Tvrtko Ursulin
- [RFC 3/9] drm/i915: Use fence callback initialization helper, Tvrtko Ursulin
- [RFC 8/9] drm/i915: Mark waits as explicit, Tvrtko Ursulin
- [RFC 9/9] drm/i915: Wait boost requests waited upon by others, Tvrtko Ursulin
- [RFC 7/9] drm/i915: Waitboost external waits, Tvrtko Ursulin
- Re: [RFC v3 0/9] Waitboost drm syncobj waits, Daniel Vetter
- ✗ Fi.CI.SPARSE: warning for Waitboost drm syncobj waits (rev3), Patchwork
- ✓ Fi.CI.BAT: success for Waitboost drm syncobj waits (rev3), Patchwork
- ✓ Fi.CI.IGT: success for Waitboost drm syncobj waits (rev3), Patchwork
- [PATCH v5] drm/i915: Consolidate TLB invalidation flow,
Tvrtko Ursulin
[Index of Archives]
[AMD Graphics]
[Linux USB Development]
[Linux Media]
[Linux SCSI]
[Yosemite Forum]