Re: Re: Help - Name Server - Maybe

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Michael Rogers wrote:
Mr. Peelman:
Thanks for asking for the info. I have attached it in a Word Doc because it seemed easier to do it that way then ot try to past it all in an email.
After looking at your .doc file and pulling up your manual on the internet, it appears that you router doesn't support this feature without a third party firmware upgrade.

see: http://ask.metafilter.com/42917/Linksys-WRT54G-questions

I don't know of anything else to tell you. You may be able to use QoS but I have no experience with that. Read the link.

I guess you can do it through Windows (but I don't do Windows):

http://www.hotcomm.com/FAQ/FAQ_staticIPXP.asp

Hope this helps... as an afterthought. In your hosts file try to make sure that you use TABs instead of SPACES between the ip addresses and urls:

127.0.0.1 (TAB) url

make sure they are all TABs and I usually put 1 per line.


    *From:* Norman Peelman <mailto:npeelman@xxxxxxxxxx>
    *Sent:* Wednesday, February 04, 2009 9:10 PM
    *To:* users@xxxxxxxxxxxxxxxx <mailto:users@xxxxxxxxxxxxxxxx>
    *Subject:* Re:  Re: Help - Name Server - Maybe

    Michael Rogers wrote:
    > The "listen 80" is in the main config file.
> > The only thing that works is 10.0.0.115. > > I was reading your comment about DHCP and LAN. My router is set as
    > DHCP server.  I can't get what the LAN settings should be.  Are
    > familiar with the Linksys Router.  If you are, then would any
    settings
    > in the advanced routing tab do anything for me here?  If it does
    then
    > I'll attach a copy of the routing tables that are in the router for
    > you to look at.

      If your router supports it (what router do you have?) there
    should be
    a place where you can tell the router to assign a user selected ip to
    the same machine every time. Every machine on your network has a
    different (unique) MAC (Media Access Control) address. This address
    doesn't change unless you manually change it. Show us your full
    'hosts'
    file and the LAN specific info from your router.

      In my Netgear router it's called 'Address Reservation' under
    Advanced->LAN IP Setup. It is a list of ip addresses that gets
    assigned
    to the various machines on my network, looks like:

     IP address    Device Name                MAC Address
    192.168.1.5   LINUX-SERVER          ??:??:??:??:??:??
    192.168.1.4   gfriend-desktop        ??:??:??:??:??:??
    192.168.1.2   dell2350-desktop      ??:??:??:??:??:??
    192.168.1.3   amd64x2                    0A:1B:2C:3D:4E:5F (example -
    numbers/letters made up)

    ...of course you would see numbers/letters instead of ??.  My
    server is
    192.168.1.3 and that address gets assigned to the computer that
    reports
    itself as MAC 0A:1B:2C:3D:4E:5F. This info is setup right along with
    'Use router as DHCP server?' but that is for my netgear.  Now if you
    have this and then tell your router to port forward all HTTP
    traffic to
    192.168.1.3 port 80 (substitute your info) you should have a setup
    that
    survives reboots.


    >     *From:* Norman Peelman <mailto:npeelman@xxxxxxxxxx>
    >     *Sent:* Wednesday, February 04, 2009 10:05 AM
    >     *To:* users@xxxxxxxxxxxxxxxx <mailto:users@xxxxxxxxxxxxxxxx>
    <mailto:users@xxxxxxxxxxxxxxxx>
    >     *Subject:* Re:  Re: Help - Name Server - Maybe
    >
    >     Michael Rogers wrote:
    >     > My browsers just do a search of the web for michalesrogers.com
    >     and I
    >     > don't know how to shut that search feature off.
    >     >
    >     >     *From:* Norman Peelman <mailto:npeelman@xxxxxxxxxx>
    >     >     *Sent:* Tuesday, February 03, 2009 3:39 PM
    >     >     *To:* users@xxxxxxxxxxxxxxxx
    <mailto:users@xxxxxxxxxxxxxxxx> <mailto:users@xxxxxxxxxxxxxxxx>
    >     <mailto:users@xxxxxxxxxxxxxxxx>
    >     >     *Subject:* Re:  Re: Help - Name Server -
    Maybe
    >     >
    >     >     Michael Rogers wrote:
    >     >     > Norman!
    >     >     >
    >     >     > Thanks for the encouragement!  I feel like I
    slamming my head
    >     >     against
    >     >     > a telephone pole as I am getting nowhere.
    >     >     >
    >     >
    >     What does the apache config file look like? You should have:
    >
    >     Listen 80
    >
    >     in the main config.
    >
    >     and it should answer if you type any of:
    >
    >     127.0.0.1
    >     10.0.0.115 (current machine ip as assigned by the router)
    >     localhost
    >
    >     ...into your browser as long as your hosts file has:
    >
    >     127.0.0.1    localhost
    >     10.0.0.115   localhost
    >
    >     127.0.0.1 is always set as the local machine (loopback)
    >     10.0.0.115 is assigned by your router and doesn't need to be set
    >     in the
    >     hosts file unless you configure the router to assign that ip
    to that
    >     machine all the time.
    >
    >
    >       You have been making a lot of changes lately. You might
    want to
    >     see if
    >     there is a computer group in your area. If so, there is
    bound to be
    >     someone that can help you. Believe it or not, once this is
    set up
    >     properly and you can see how it works it's not hard to
    understand.
    >
    >     >     > My DSL modem that connects me to the internet has the
    >     static IP
    >     >     > address of  "66.113.46.108 michaelsrogers.com".  I
    know the
    >     >     problem is
    >     >     > between the DSL modem and my Apache Server.  Just
    where I
    >     don't
    >     >     know.
    >     >     >
    >     >     > In the host file on the machine that the Apache is on I
    >     made the
    >     >     entry
    >     >     > of "10.0.0.115 michaelsrogers.com".  This same
    machine has
    >     an IP
    >     >     > address of 10.0.0.115 and seems to be staying with
    it even
    >     though I
    >     >     > have rebooted several times.
    >     >     >
    >     >     On this machine, if you type in your browser:
    >     >
    >     >     michaelsrogers.com
    >     >
    >     >     it should work without even going through the router
    >     >
    >     >
    >     >     > In my Linksys router I have made the port forwarding
    >     entries to
    >     >     point
    >     >     > to "10.0.0.115 on port 80.
    >     >     >
    >     >     > When I turn off the DHCP server in my computer that
    has the
    >     >     Apache on
    >     >     > it, and make it a static IP address then none of my
    >     computers will
    >     >     > connect to the internet
    >     >     >
    >     >     > There is something that I missed.
    >     >     >
    >     >     > I am going to try going into TCP/IP settings in the
    alternate
    >     >     > Configuration tab in use the first three lines and
    see what
    >     >     happens.
    >     >     > The statement in the setting tab says "if this
    computer is
    >     used on
    >     >     > more then one network. enter the alternate IP
    settings below."
    >     >     >
    >     >     > Expect for the one guy/gal who made the inappropriate
    >     remark, I
    >     >     have
    >     >     > appreciated the help that everyone has given me so
    far.  I
    >     would
    >     >     just
    >     >     > ask that everyone please be patient with me, and I
    might just
    >     >     get the
    >     >     > problem resolved with your help!
    >     >     *Are you hosting www.michaelsrogers.net
    <http://www.michaelsrogers.net>
    >     <http://www.michaelsrogers.net>
    >     >     <http://www.michaelsrogers.net> on your apache server
    or on
    >     >     ipower? I'm confused as to why your .net and .com
    addresses
    >     >     resolve to
    >     >     different ip addresses. Do you want the outside world
    to see
    >     the .com
    >     >     address?
    >     >
    >     >     As long as your 'server' computer keeps the same address,
    >     the port
    >     >     forwarding should work fine as long as your provider
    doesn't
    >     block
    >     >     port
    >     >     80. A big problem could be if your router won't allow
    you to
    >     'visit'
    >     >     your own server from inside your network. I have the same
    >     problem
    >     >     with
    >     >     my newest netgear router. I had to set the hosts file
    like you
    >     >     above. If
    >     >     you have more than one computer in your network, you
    need to
    >     >     create the
    >     >     same entries in their hosts files if you intend on
    viewing your
    >     >     website
    >     >     from them as well. If this is the case then more than
    likely you
    >     >     need to
    >     >     have your router set as the DHCP server (the router
    assigns
    >     >     addresses)
    >     >     and then in the LAN IP setup you tell it to assign the
    same
    >     >     address (you
    >     >     enter the address) to the same computer every time.
    >     >
    >     >     *
    >     >     --
    >     >     Norman Registered Linux user #461062 -Have you been to
    >     >     www.apache.org <http://www.apache.org>
    <http://www.apache.org>
    >     <http://www.apache.org> yet?-
    >     >
> > > ---------------------------------------------------------------------
    >     >     The official User-To-User support forum of the Apache HTTP
    >     Server
    >     >     Project.
    >     >     See <URL:http://httpd.apache.org/userslist.html
    <http://httpd.apache.org/userslist.html>
    >     <http://httpd.apache.org/userslist.html>
    >     >     <http://httpd.apache.org/userslist.html>> for more info.
    >     >     To unsubscribe, e-mail:
    users-unsubscribe@xxxxxxxxxxxxxxxx
    <mailto:users-unsubscribe@xxxxxxxxxxxxxxxx>
    >     <mailto:users-unsubscribe@xxxxxxxxxxxxxxxx>
    >     >     <mailto:users-unsubscribe@xxxxxxxxxxxxxxxx>
    >     >        "   from the digest:
    >     users-digest-unsubscribe@xxxxxxxxxxxxxxxx
    <mailto:users-digest-unsubscribe@xxxxxxxxxxxxxxxx>
    >     <mailto:users-digest-unsubscribe@xxxxxxxxxxxxxxxx>
    >     >     <mailto:users-digest-unsubscribe@xxxxxxxxxxxxxxxx>
    >     >     For additional commands, e-mail:
    users-help@xxxxxxxxxxxxxxxx <mailto:users-help@xxxxxxxxxxxxxxxx>
    >     <mailto:users-help@xxxxxxxxxxxxxxxx>
    >     >     <mailto:users-help@xxxxxxxxxxxxxxxx>
    >     >
    >     > Michael S. Rogers
    >     > (406) 967-2385
    >     >
    >     > Web Sites: http://www.michaelsrogers.net &
    >     > http://www.michaelsrogers.net/trainwreck/Wreck.html
    >
    >
> ---------------------------------------------------------------------
    >     The official User-To-User support forum of the Apache HTTP
    Server
    >     Project.
    >     See <URL:http://httpd.apache.org/userslist.html
    <http://httpd.apache.org/userslist.html>
    >     <http://httpd.apache.org/userslist.html>> for more info.
    >     To unsubscribe, e-mail: users-unsubscribe@xxxxxxxxxxxxxxxx
    <mailto:users-unsubscribe@xxxxxxxxxxxxxxxx>
    >     <mailto:users-unsubscribe@xxxxxxxxxxxxxxxx>
    >        "   from the digest:
    users-digest-unsubscribe@xxxxxxxxxxxxxxxx
    <mailto:users-digest-unsubscribe@xxxxxxxxxxxxxxxx>
    >     <mailto:users-digest-unsubscribe@xxxxxxxxxxxxxxxx>
    >     For additional commands, e-mail: users-help@xxxxxxxxxxxxxxxx
    <mailto:users-help@xxxxxxxxxxxxxxxx>
    >     <mailto:users-help@xxxxxxxxxxxxxxxx>
    >
    > Michael S. Rogers
    > (406) 967-2385
> > Web Sites: http://www.michaelsrogers.net &
    > http://www.michaelsrogers.net/trainwreck/Wreck.html


    ---------------------------------------------------------------------
    The official User-To-User support forum of the Apache HTTP Server
    Project.
    See <URL:http://httpd.apache.org/userslist.html
    <http://httpd.apache.org/userslist.html>> for more info.
    To unsubscribe, e-mail: users-unsubscribe@xxxxxxxxxxxxxxxx
    <mailto:users-unsubscribe@xxxxxxxxxxxxxxxx>
       "   from the digest: users-digest-unsubscribe@xxxxxxxxxxxxxxxx
    <mailto:users-digest-unsubscribe@xxxxxxxxxxxxxxxx>
    For additional commands, e-mail: users-help@xxxxxxxxxxxxxxxx
    <mailto:users-help@xxxxxxxxxxxxxxxx>

Michael S. Rogers
(406) 967-2385
Web Sites: http://www.michaelsrogers.net & http://www.michaelsrogers.net/trainwreck/Wreck.html
------------------------------------------------------------------------

---------------------------------------------------------------------
The official User-To-User support forum of the Apache HTTP Server Project.
See <URL:http://httpd.apache.org/userslist.html> for more info.
To unsubscribe, e-mail: users-unsubscribe@xxxxxxxxxxxxxxxx
   "   from the digest: users-digest-unsubscribe@xxxxxxxxxxxxxxxx
For additional commands, e-mail: users-help@xxxxxxxxxxxxxxxx

--
Norman Registered Linux user #461062 -Have you been to www.apache.org yet?-

---------------------------------------------------------------------
The official User-To-User support forum of the Apache HTTP Server Project.
See <URL:http://httpd.apache.org/userslist.html> for more info.
To unsubscribe, e-mail: users-unsubscribe@xxxxxxxxxxxxxxxx
  "   from the digest: users-digest-unsubscribe@xxxxxxxxxxxxxxxx
For additional commands, e-mail: users-help@xxxxxxxxxxxxxxxx


[Index of Archives]     [Open SSH Users]     [Linux ACPI]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Squid]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]

  Powered by Linux