The "listen 80" is in the main config file.
The only thing that works is 10.0.0.115.
I was reading your comment about DHCP and LAN. My
router is set as DHCP server. I can't get what the LAN settings should
be. Are familiar with the Linksys Router. If you are, then would any
settings in the advanced routing tab do anything for me here? If it does
then I'll attach a copy of the routing tables that are in the router for you to
look at.
Sent: Wednesday, February 04, 2009 10:05 AM
Subject: Re: Re: Help - Name Server -
Maybe
Michael Rogers wrote: > My browsers just do a search of
the web for michalesrogers.com and I > don't know how to shut that
search feature off. > > *From:* Norman
Peelman <mailto:npeelman@xxxxxxxxxx> >
*Sent:* Tuesday, February 03, 2009 3:39 PM >
*To:* users@xxxxxxxxxxxxxxxx
<mailto:users@xxxxxxxxxxxxxxxx> >
*Subject:* Re: Re: Help - Name Server -
Maybe > > Michael Rogers
wrote: > >
Norman! > > >
> Thanks for the encouragement! I feel like I slamming my
head > against >
> a telephone pole as I am getting nowhere. >
> > What does the apache config file look like? You should
have:
Listen 80
in the main config.
and it should answer
if you type any of:
127.0.0.1 10.0.0.115 (current machine ip as
assigned by the router) localhost
...into your browser as long as
your hosts file has:
127.0.0.1
localhost 10.0.0.115 localhost
127.0.0.1 is always set
as the local machine (loopback) 10.0.0.115 is assigned by your router and
doesn't need to be set in the hosts file unless you configure the router
to assign that ip to that machine all the time.
You have
been making a lot of changes lately. You might want to see if there is a
computer group in your area. If so, there is bound to be someone that can
help you. Believe it or not, once this is set up properly and you can see
how it works it's not hard to understand.
>
> My DSL modem that connects me to the internet has the static
IP > > address of "66.113.46.108
michaelsrogers.com". I know the > problem
is > > between the DSL modem and my Apache
Server. Just where I don't >
know. > > >
> In the host file on the machine that the Apache is on I made
the > entry > >
of "10.0.0.115 michaelsrogers.com". This same machine has an
IP > > address of 10.0.0.115 and seems to be
staying with it even though I > > have
rebooted several times. > >
> On this machine, if you type in your
browser: > >
michaelsrogers.com > > it should work
without even going through the
router > > > > In my Linksys
router I have made the port forwarding entries
to > point > >
to "10.0.0.115 on port 80. > >
> > When I turn off the DHCP server in my
computer that has the > Apache
on > > it, and make it a static IP address
then none of my computers will > > connect to
the internet > >
> > There is something that I
missed. > > >
> I am going to try going into TCP/IP settings in the
alternate > > Configuration tab in use the
first three lines and see what > happens.
> > The statement in the setting tab says
"if this computer is used on > > more then
one network. enter the alternate IP settings
below." > > >
> Expect for the one guy/gal who made the inappropriate remark,
I > have > >
appreciated the help that everyone has given me so far. I
would > just >
> ask that everyone please be patient with me, and I might
just > get the >
> problem resolved with your help! > *Are you
hosting www.michaelsrogers.net >
<http://www.michaelsrogers.net> on
your apache server or on > ipower? I'm confused
as to why your .net and .com addresses > resolve
to > different ip addresses. Do you want the
outside world to see the .com >
address? > > As long as your 'server'
computer keeps the same address, the port >
forwarding should work fine as long as your provider doesn't
block > port > 80.
A big problem could be if your router won't allow you to
'visit' > your own server from inside your
network. I have the same problem >
with > my newest netgear router. I had to set
the hosts file like you > above.
If > you have more than one computer in your
network, you need to > create
the > same entries in their hosts files if you
intend on viewing your >
website > from them as well. If this is the case
then more than likely you > need
to > have your router set as the DHCP server
(the router assigns >
addresses) > and then in the LAN IP setup you
tell it to assign the same > address
(you > enter the address) to the same computer
every time. > >
* > -- > Norman
Registered Linux user #461062 -Have you been
to > www.apache.org <http://www.apache.org>
yet?- > >
--------------------------------------------------------------------- >
The official User-To-User support forum of the Apache HTTP
Server >
Project. > See <URL:http://httpd.apache.org/userslist.html >
<http://httpd.apache.org/userslist.html>>
for more info. > To unsubscribe, e-mail: users-unsubscribe@xxxxxxxxxxxxxxxx >
<mailto:users-unsubscribe@xxxxxxxxxxxxxxxx> >
" from the digest: users-digest-unsubscribe@xxxxxxxxxxxxxxxx >
<mailto:users-digest-unsubscribe@xxxxxxxxxxxxxxxx> >
For additional commands, e-mail: users-help@xxxxxxxxxxxxxxxx >
<mailto:users-help@xxxxxxxxxxxxxxxx> > >
Michael S. Rogers > (406) 967-2385 > > Web Sites: http://www.michaelsrogers.net &
> http://www.michaelsrogers.net/trainwreck/Wreck.html
--------------------------------------------------------------------- The
official User-To-User support forum of the Apache HTTP Server Project. See
<URL:http://httpd.apache.org/userslist.html>
for more info. To unsubscribe, e-mail: users-unsubscribe@xxxxxxxxxxxxxxxx
" from the digest: users-digest-unsubscribe@xxxxxxxxxxxxxxxx For
additional commands, e-mail: users-help@xxxxxxxxxxxxxxxx
Michael S. Rogers (406) 967-2385
|