|
My browsers just do a search of the web for
michalesrogers.com and I don't know how to shut that search feature
off.
Sent: Tuesday, February 03, 2009 3:39 PM
Subject: Re: Re: Help - Name Server -
Maybe
Michael Rogers wrote:
> Norman!
>
>
Thanks for the encouragement! I feel like I slamming my head against
> a telephone pole as I am getting nowhere.
>
> My
DSL modem that connects me to the internet has the static IP
> address
of "66.113.46.108 michaelsrogers.com". I know the problem is
> between the DSL modem and my Apache Server. Just where I don't
know.
>
> In the host file on the machine that the Apache
is on I made the entry
> of "10.0.0.115 michaelsrogers.com". This
same machine has an IP
> address of 10.0.0.115 and seems to be staying
with it even though I
> have rebooted several times.
>
On this machine, if you type in your
browser:
michaelsrogers.com
it should work without even going
through the router
> In my Linksys router I have made the port
forwarding entries to point
> to "10.0.0.115 on port 80.
>
> When I turn off the DHCP server in my computer that has the Apache on
> it, and make it a static IP address then none of my computers will
> connect to the internet
>
> There is something
that I missed.
>
> I am going to try going into TCP/IP
settings in the alternate
> Configuration tab in use the first three
lines and see what happens.
> The statement in the setting tab
says "if this computer is used on
> more then one network. enter the
alternate IP settings below."
>
> Expect for the one
guy/gal who made the inappropriate remark, I have
> appreciated the
help that everyone has given me so far. I would just
> ask that
everyone please be patient with me, and I might just get the
> problem
resolved with your help!
*Are you hosting www.michaelsrogers.net on your apache
server or on
ipower? I'm confused as to why your .net and .com addresses
resolve to
different ip addresses. Do you want the outside world to see
the .com
address?
As long as your 'server' computer keeps the same
address, the port
forwarding should work fine as long as your provider
doesn't block port
80. A big problem could be if your router won't allow
you to 'visit'
your own server from inside your network. I have the same
problem with
my newest netgear router. I had to set the hosts file like
you above. If
you have more than one computer in your network, you need to
create the
same entries in their hosts files if you intend on viewing your
website
from them as well. If this is the case then more than likely you
need to
have your router set as the DHCP server (the router assigns
addresses)
and then in the LAN IP setup you tell it to assign the same
address (you
enter the address) to the same computer every
time.
*
--
Norman Registered Linux user #461062 -Have you been
to www.apache.org
yet?-
---------------------------------------------------------------------
The
official User-To-User support forum of the Apache HTTP Server Project.
See
<URL:http://httpd.apache.org/userslist.html>
for more info.
To unsubscribe, e-mail: users-unsubscribe@xxxxxxxxxxxxxxxx
" from the digest: users-digest-unsubscribe@xxxxxxxxxxxxxxxx
For
additional commands, e-mail: users-help@xxxxxxxxxxxxxxxx
Michael S. Rogers
(406) 967-2385
|
